URGENT help needed:Address data missing after QA Refresh from PRD

All,
Address data for almost all user-ids are missing after QA Refresh from PRD.
In QA, after importing the User-Master although its shows successful. The detailed log shows:
   Data inconsistency in USR21. Start RSADRCK2 (See Note 459763)
   Exit program AFTER_IMP_ADDRESS3 successfully executed
   SAP user has no address SAP*
   Error while deleting ADRVP for SAP*
   SAP user has no address SAPCPIC...
   ERROR: Type "F" user exit with SYS_ERROR:     SUSR_CLIENTCOPY_USERBUF_RESET
We also do a Table export - import wherein the tables
USR03
USR07
USR09
USR20
USR21
USR30
are included.
The no. of entries exported and imported are same.
Also FYI in the User-master Transport i can see the following Tables included in the object list
USR01
USR02
USR04
USR05
USR06
USR08
USR14
USR21S
USR22
USRACL
USREXTID
USREXTIDH
Has anyone seen this before?
Any body has any ideas?

Hello Bidwan,
I think it is an issue with company address. Just check if company addresses are existing the source client ?After client copy company addreses of target client will only exist in source client. Then if you do impot of the transport containing USR* tables it will try to assign old company addresses to the users but probably they are not exisitng in target client any more.
If this is the case then you need to create those company addresses again using SUCOMP and then once again import the transport for user master.
Regards.
Ruchit.

Similar Messages

Urgent help needed: registry.dat is missing when i run my form in web base

Hi gurus,
i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
Details...
Java Exception:
oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
at oracle.forms.engine.Runform.initRegistry(Unknow Source)
at oracle.forms.engine.Runform.startRegistry(Unknow Source)
at oracle.forms.engine.Main.createRunform(Unknow Source)
at oracle.forms.engine.Main.start(Unknow Source)
at sun.applet.JinitAppletPanel.run(Compiled code)
at java.lang.Tread.run(Thread.java:466)
what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
Your urgent help and advise is needed plssssssss.......
Many thanks in advance.

The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
Also, try if the URL with the slash:
http://domain.com/form60/java/oracle/forms/registry/Registry.dat
does work when you just paste it in a browser. It should download the Registry.dat file

Help!! Data missing after sending it in for repairs.

I sent in my Xperia Z1 for repairs because of a cracked screen. So when I got it back, all the data was missing. I suspect they did a hard factory reset causing all my data to be wiped. Add. info: I sent it to an authorized Sony dealer and I did not have a sd card so all the data was internal memory. Please help me figure a way to retrieve the data! I can't bare losing all those memories.

Strange that they did not intimate you about backing up your data. Contact Sony. Try to go for a Hard recovery option if there is still something left, I dont think you are left with any data.
Also have you given your device under the accidentall cover??
They have replaced or repaired your unit?

Urgent HELP needed: Address Book will not start, just spinning wheel.

When I want to start the Address Book I just get the spinning wheel without end.
If I press: Command-Option-Esc to force-quit the application I am informed that the Address Book is not responding; I can only force-quit the application.
Since my AB data is also on MobileMe and another computer, I could, if necessary, delete whatever data files (and repopulate later). But how do I get Address Book working again?
Your help is highly appreciated. Thanks, Veit

Thanks, Roam, for the referral to Pacifist; sounds useful in the future.
I could solve my problem by:
- deleting the com.apple.AddressBook.plist file
- resetting the synchronization files as described in http://discussions.apple.com/thread.jspa?messageID=10868689&#10868689
- and finally syncing with MobileMe, i.e. overwriting the computer with data from MobileMe.
All seems to work again, also the resizing. Thanks again for your help. Cheers, Veit

URGENT help required. BBM7 missing after OS upgrade! :(

Dear BB friends and helpers!
I urgently require your help. I have seen some similar topics posted but none exactly the same as mine so I would really really appreciate if anyone can very kindly help me out.
I have a major problem on the Blackberry Bold 9900.
A few days ago I updated my Blackberry Messanger (BBM only) to BBM7. Everything was working fine.
Then last night I got a message on my phone to upgrade my operating system to OS 7 which I installed.
Then this morning I noticed that my BBM has disappeared from my phone and I can't find it.
I currently have 7.1.0 Bundle 2061
(Also note that BB App world wont give me the option to download BBM and trying to download other apps also freezes the app world)
I have already tried
1) Hard reset / battery pull
and
2) Doing a universal search and looking for hidden icons.
I have seen a few other similar topics but I wanted to ask what I should do... :
1) Re-install BBM7 from a link from this forum? or
2) Downgrade OS7 to OS 6 via Options - Software Updates - Downgrade?
Or any other options?
The KEY thing is that I do not lose my BBM contacts! That is the end goal of whatever is recommended. I really hope someone can help.
Many thanks in advance,
Kind Regards,
Michael
Solved!
Go to Solution.

I did the ID update and did not lose a thing. If you want, do a backup to pc first.

Urgent help needed in date & time

I want to same date & time in one field in a database
As java.sql.date doesn`t support HH:MM:SS
how do i save (Date & Time) field in the database

you can extract the hours, minutes, and seconds from your date object.
int hours = dateobject.getHours();
int minutes = dateobject.getMinutes();
int seconds = dateobject.getSeconds();
String hhmmss = String.valueOf(hours)+String.valueOf(minutes)+String.valueOf(seconds);

Urgent Help Needed: UME action missing for permission option

Hi Gurus,
I have created a role and i want the users in that role will have the access to edit Permissons under the Sys Admin tab. When I right click on Portal content under permission i could only see Refresh, I want the option permission when rt click here, I can see this option when i use Superadmin role. Can anyone please suggest wat action is required.
Thanks,
Rams
Message was edited by:
admin ram
Message was edited by:
admin ram

Hi Ram
Please check assigning these roles instead of super admin role
"content_admin_role" or " contentmanager" . In case if any of these enable open permissions then check out what activity is in the role and include in yours .
Regards
Rahul
Award points if help useful "

Urgent help needed -- how to submit a web page from a PL/SQL api

Hi,
Could anyone tell me how to submit a remote web page through pl/sql
Thanks,
Rachna

I am not sure what you mean by this question.
You can submit from PL/SQL to an external webpage/website using the UTL_HTTP package.
You can submit from an external webpage to a PL/SQL package if that package is invoked by you webserver. The most direct way is using the MOD_PLSQL module for Apache that Oracle ships as HttpServer and that is the foundation for Oracle Portal and HTML DB. Alternatively your webpage can submit to a JSP that invokes your PLSQL package through JDBC.
best regards,
Lucas

Urgent help needed - writing japanese into the applet code from servlet

Hi,
I have a jsp file which writes an applet as well as a popup menu on the applet. All the menu items and applet text displays japanese character.
Two menu items on this popup menu are written by the same jsp while three dynamic menu items are written by a servlet which does so by writing a response back to the jsp.
My problem is when I write the popup items from the servlet it doesn't display the japanese character but something like this "-- $B?7$7$$$*5RMM$rA*Br(B --"
I am sure that something wrong in the way I write into the response in the SERVLET because JSP writes japanese menu items fine.
my code in servlet is like this.
response.setContentType("text/plain;charset=ISO-2022-JP");
PrintWriter output = response.getWriter();
output.println(\u30aa\u30f3\u30c7\u30de\u30f3\u30c9\u30ec\u30dd\u30fc\u30c8);
I have set the font family to, font-family: gothic, mincho, arial unicode ms; in the jsp that takes care of displaying everything propertly but the MenuItems from the servlet :(
Please write back if you have the solution.
Thanks,
preeti..

i don't know exactly,but ithink that the problem is about the ISO-code
japanese has got another number

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Problem uninstalling MaxMSPRuntime on mac - urgent help needed

Hello there,
I've been using Cycle 74's MaxMSP Runtime version 5.1 for a while but recently had to witch to an earlier version to make some hardware function along side the Max runtime environment. The problem is that where i would usually just drag and drop Max 5.1 into the trash to uninstall it, for some reason, after i have done this and try to install the older version of Max, OSX wont let me install Max 4.0.8 as it says an updated version is currently installed. I have scoured my hard drive for the remanence of Max 5.1. and deleted everything i've found. Is there a way of overriding macosx and getting it to replace Max5.1 with an older version?
Urgent help needed as i am playing a show this weekend and currently am not able to get my equipment to function.
A shiny nickel for the one who saves my ***.
Thanks
Henry

Hi- Try this...
If you can, reinstall or use time machine to recover your recently deleted MaxMSP Runtime 5.1.
Then, download AppZapper. It is a utility that helps you cleanly delete programs off your mac. It is free for the first 5 uses.
http://appzapper.com/
Then, install AppZapper, and then go ahead and drag the MaxMSP Runtime 5.1 into it, and it should hopefully get rid of the pesky program

Recovering windows XP -Urgent help needed

I am new to Toshiba. I hav a 60 GB hard disk with no partition and windows XP home installed. I want to partition the hard disk now. Now after formatting the hard disk do i lose Windows XP HE completely or is there chance to recover it and reinstall it. Urgent help needed.

Hi
You can reinstall your notebook using Recovery CD. It is easiest and fastest way to reinstall OS, all necessary drivers and tools. Put Recovery CD into DVD-ROM, start notebook and press down C button. At the beginning there is choice between two kinds of installation (Standard mode and expert mode).
If you choose the first one whole HDD will be formatted and used for OS installation. With second one (expert mode) it is possible to install OS on first partition. It is also possible to define how big the partition should be.
Try it. It is very simple to do it.
Good luck

URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

I have tried the Security Realm of Tomcat. Since I do not have
an LDAP server, I decided to use the Tomcat-users.xml file in
Tomcat\conf directory.
I added the following lines of code in the web.xml file.
<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>webviewer</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Tomcat Manager Application</realm-name>
</login-config>
The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
<tomcat-users>
<user name="test" password="password" roles="webviewer" />
</tomcat-users>
So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
URGENT HELP NEEDED ... I need to get back to my client on this.
Help would be v. much appreciated.

In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
I've tried switching to another USB port of my MacBook. No luck.
My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
Urgent help needed & appreciated. Millions of thanks in advance.
Gary

1. I used both cables - theirs & mine ... and on several macs
2. yes, same cable for wall & mac
3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

URGENT help needed:Address data missing after QA Refresh from PRD

Similar Messages

Maybe you are looking for