Urgent help --- WAN boot installation error

Hi
I m trying to do wanboot on t2000 server after giving boot net - install i m getting this error , any thought , the wanboot server is fine I m able to install for other sever
++++++++++++++++++error messages ++++++++++++++++++
Rebooting with command: boot net - install
/pci@780/pci@0: Device 1c Nothing there
Boot device: /pci@780/pci@0/pci@1/network@0 File and args: - installing there
/pci@780/pci@0: Devi
1000 Mbps full duplex Link up
/p
HTTP: Could not connect to 172.26.4.87:80 (Connection timed out)
/pci@7c0: Device 0 pci
++++++++++++++++++++++++++++++++++

Similar Messages

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

Please Help! Flash Installation Errors!

I had Flash CS4 working a few months ago, then I installed Air.
After it installed, I kept getting an error message whenever I tried to open Flash CS4.
I uninstalled Air, Flash, and all other Adobe programs from my computer.
Then, I couldn't install flash.
I used the CS4 Clean Script, defraged my computer, cleaned the registry, removed all traces that I could find of Adobe on my computer.
I disables my firewall, McAfee and I'm the administrator of my computer, but that didn't help.
The installation stops very close to the end and says Installation Failed
I even tried safe mode, but the fancy installer didn't work like a normal batch file and wouldn't open.
I'm using a 32-bit Windows XP.
Please Help!
The error code:
Adobe Flash CS4
Error:
Error 1625. This installation is forbidden by system policy. Contact your system administrator.

When you uninstall, make sure to use the CS4 Clean Utility thereafter. Sometimes remnants of trials get in the way. Also make sure you get rid of Adobe AIR and Acrobat.com. These are separate from the main install and need to be removed individually. Likewise, you may wish to check your Acrobat/ Adobe reader install and remove it, if necessary. Since it uses components shared with PS and those may in fact be newer than the ones on the Photoshop install DVD due to updates, the installer may not liek them. And of course with all things Vista: Run as admin on first program launch so the activation can proceed and all other options can kick in correctly.
Mylenium

Help needed general installation error???

I am trying to install adobe reader and it will install until it is 96% then I get a general installation error.
I am running an older version of windows XP. can anyone assist me with this?
Many thanks

Windows XP SP2 (32bit) is not a supported OS for installing Reader X. Please update to the latest service pack released for WIN XP i.e. SP3.
You can get more details about the Tech Specs for Reader X at:
http://www.adobe.com/products/reader/tech-specs.html

Urgent, HELP! Boot Camp Windows 7 installation?

Hey Forum.
I am using snow leopard on Macbook, and I wanted to install windows 7 using boot camp, and when I finish partitioning, I plug in my ext. hdd with windows 7 in it and then i clicked start installation, but then they say that can only use install dvd. So forum, is there anyway i can install windows 7 using it's install dvd in ext.hdd?
Thank you.
Ala.

There's an entire forum area devoted to Boot Camp:
http://discussions.apple.com/category.jspa?categoryID=237

Urgent help needed in installation

I am trying to inatall Personal Oracle 8.1 on a Microsoft Windows ME. I get an error while i start installation saying: "There was a problem in accessing the staging area. Please make sure the specified values for 'Source' and 'Destination' are valid." Even when I enter valid values. Has anybody encountered such problem before? Any help would be appreciated. Thanx.

Hi Sumit,
there is nothing called "BPELConsole" in soa 11g
go to
1. http://hostname:8001/soa-infra
2. http://hostname:9001/OracleBAM
2. http://hostname:8001/em

Urgent :---XI 3.0 INSTALLATION ERROR

Dear Friends,
i have installed all the components of Xi 3.0.
And now i m in the post installation steps.
while creating RFC connection for
INTERGRATION_DIRECTORY_HMI
as per the documentation ...in logon/Security
i selected Basic Authentication ..
popup comes and as per the documentation by SAP i selected Yes.
now the it throws an error:------
ssl client PSE deafualt doesnt exist......
and it is not allowing to do anything further.
So pls experts advise me..
how can i come out of that
thx
simraan

Hi,
Check this links,
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Regards,
Phani
Reward points if Helpful

HELP! Boot up Error.. %IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.

Hi Cisco Support Community,
I have a problem with my Cisco 3850, it does not load completely
Does any one encountered these error? please do help
Here is the logs:
Booting...Initializing and Testing RAM ++++@@@@####...################################++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@++@@done.
Memory Test Pass!
Base ethernet MAC Address: 7c:95:f3:64:26:00
Interface GE 0 link down***ERROR: PHY link is down
Initializing Flash...
flashfs[7]: 0 files, 1 directories
flashfs[7]: 0 orphaned files, 0 orphaned directories
flashfs[7]: Total bytes: 6784000
flashfs[7]: Bytes used: 1024
flashfs[7]: Bytes available: 6782976
flashfs[7]: flashfs fsck took 1 seconds....done Initializing Flash.
Getting rest of image
Reading full image into memory....done
Reading full base package into memory...: done = 79121160
Nova Bundle Image
Kernel Address : 0x6042d350
Kernel Size : 0x402ecf/4206287
Initramfs Address : 0x60830220
Initramfs Size : 0xdb98e6/14391526
Compression Format: .mzip
Bootable image at @ ram:0x6042d350
Bootable image segment 0 address range [0x81100000, 0x82110000] is in range [0x80180000, 0x90000000].
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@boot_system: 380
Loading Linux kernel with entry point 0x81653a10 ...
Bootloader: Done loading app on core_mask: 0xf
### Launching Linux Kernel (flags = 0x5)
ata1.00: failed to set xfermode (err_mask=0x100)
ata1.00: failed to set xfermode (err_mask=0x100)
ata1.00: failed to set xfermode (err_mask=0x100)
%IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.
%IOSXEBOOT-4-ABORT: (rp/0): Package provisioning file {/tmp/packages.conf} does not exist.

Download the ver you want to use onto a flash drive, then use it to load the ios, after it loads you can copy the ios to flash.
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/deployment_guide_c07-727067.html

Urgent help needed on writing errors in to windows events application logs

Hi all,
we have web based application. Whenever there is critical errors encounters in our application we need to write that errors in to windows
event viewer, application logs. Please help me on how to do this.
do we have any specific API for this ?
thanks in advance
Shivakumar

You should use WinAPI to do so. Asking in JNI forum (or specialized WinAPI forum) for more details is good idea I think.

Urgent help needed on writing errors in to windows application logs

Hi all,
we have web based application. Whenever there is critical errors encounters in our application we need to write that errors in to windows
event viewer, application logs. Please help me on how to do this.
do we have any specific API for this ?
thanks in advance
Shivakumar

You should use WinAPI and followed functions: RegisterEventSource(), ReportEvent() and may be some more. It was some time ago as I deal with...

Urgent help needed in Installation of BPEL in SOA 11.1.1.3

Hi,
I have followed these steps to installation SOA Suite in my Linux box:
Task 1 - Complete the installation planning requirements
Task 2 - Run RCU to create the necessary schemas.
Task 3 - Install Oracle WebLogic Server
Task 4 - Install Oracle SOA Suite
Task 5 - Configure Oracle SOA Suite --- (I have created schemas for SOA and BAM)
WLS:- 10.3.3, SOA:- 11.1.1.3, RCU 11.1.1.3
I was able to succesfully install the SOA & BAM also able to configure these in one linux box and could see these servers up and running in the WLS console:-
1. bam_server1
2. soa_server1
However the tragedy part is I am not able to access niether the BAM or BPEL console in GUI using these urls:-
1. http://hostname.domainname:port/BPELConsole
2. http://<host>:<http_port>/oraclebam
Please help me how to install & configure BPEL in SOA with a detailed steps or instructions.
Thanks
Sumit

Hi Sumit,
there is nothing called "BPELConsole" in soa 11g
go to
1. http://hostname:8001/soa-infra
2. http://hostname:9001/OracleBAM
2. http://hostname:8001/em

Urgent help required : Batch processing error of an inbound idoc

hi,
i have a problem while posting an idoc to the GL(FB01).
i'm using an Inbound idoc message type : ACC_GL_POSTING
idoc type : ACC_GL_POSTING01.
Process code : BAPI.
In the transaction code OBA7 i have enabled a particular document type as BATCH INPUT ONLY.
i have set the option " Trigger by background program" in the partner profile (we20).
while testing the process i'm getting the error "Document type -- is only defined for batch input".
how can i overcome this error? can idocs be used to post for transaction that are batch enabled . plz help me.
with regards.
T.Jeyagopi.

Jeyagopi,
There are different types of Data loading into SAP.
BATCH INPUT / BDC / IDOC / BAPI etc. BATCH INPUT are standard programs that take the data and update SAP. I don't think that is same as batch processing of IDOC.
You might want to remove the setting of batch input, retain the batch processing in WE20 and try it out.
In my opinion it should work.
Regards,
Ravi
Note : Please reward points for the posts that help you.

Urgent help regarding process chain error

hi experts ,,
one of the process chain is not running properly for last 5 days ....
now current status of process chain is red ...and msg is last delta isrunning/has errors ..couldnt process request
msg of yester days chain ........
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
error msg in bd87 (with idoc status 02 )
tried to process idoc manually but it didnt happen ...throughing same error....
one more thing here is same process chain status on 16th is in yellow status .....
its in yellow status at dtp load step ....on right click on dtp_load variant --->in batch montior --->job overview
dtp_laod job was is ready status ....
i thought this status effecting others so tried to schedule the job couldnt ....
so deleted job in confession....
now and process which is bfr dtp_load is in yellow and whole chain is in yellow ....
what shall i do now ??how to correct this ??
shall run dtp manually and dso activation manually ???and shall i make process into green status ???
or shall retrive deleted job wit basis ppl help???
please help me...
whoever helps me to fix this issue will rewarded wit full points and i will be greatful to them ...
Regars, \
Harry...

Yes, as rightly said you need to run the previous delta before updating new records in the latest request. If possible de-schedule the chains for a while, delete the old deltas (assuming you are using flexible updates?) and try to repeat the loads manually & proceed to activate & schedule once the delta has finished processing. If you still think this is an issue related to idocs processing, you can do the re-processing, provided they do not create fresh batch of idocs in the source system. You can re-process the idocs both inbound & out bound using reports like RBDAGAIN (But again, use extreme caution on these!). Please refer the #scn wiki on http://goo.gl/njVLS for more information on the idocs. For reprocessing please check this http://goo.gl/8aAcz. Thanks.

Urgent help needed with installation of Logic!

Hi I just installed Logic Pro 9 on the Macbook Pro I bought today and it failed because 'this version of OSX is not compatible with Logic 9.1.1.' What should I do? Two years ago I installed the same version on my previous Macbook. Both Apple and the reseller said it was going to be fine. Please help me as quickly as possible. I need to use it in a couple of hours...thanks. Xavier

Restart your Mac and Run Software update

Urgent Help Cant find an error in this statement and jdk is showing

Error:
Exception: [Microsoft][ODBC Microsoft Access Driver] Syntax error in CONSTRAINT clause.
`````````````````H E L P```````````````
s1.executeUpdate("Create Table " + n + " (Sno integer, Name varchar(20),So varchar(5),Source varchar(15), TTO integer, TTH integer, Status varchar(5), Rec varchar(15), DOJ Date, Type varchar(10), Sector varchar(15), Primary varchar(15), Proj varchar(15), Skills varchar(15), Level varchar(10), Band integer, Location varchar(15), Company varchar(20), Remarks varchar(50), Test date, IV date, Qualification varchar(15), RefSal float, RIF_NO integer, RIF_DATE Date, Target_Date Date, Lead_Time date, SLA_ACH Date, R1 date, R2 date, R3 date, R4 date,R5 date, R6 date, R7 date, R8 date, RR1 date,RR2 date, RR3 date, RR4 date,RR5 date, RR6 date, RR7 date, RR8 date)");
I am using access as backend database on a remote machine.

n is not a numeric data but is of string typeThat was just for your information because you didn't show any of your java code.
Did you try changing the names of those columns? I haven't used access much, but i believe there is some workaround to using reserved words by putting square brackets aroundf them. I haven't done it, I just noticed the access gui front end does it sometimes. i found it much easier to just not use words I thought might be reserved.

Urgent help --- WAN boot installation error

Similar Messages

Maybe you are looking for