URGENT: How to allow ACTIVE X on a particular site?

I am currently troubleshooting a problem for my company. Due to security reasons, we block active X on our proxy server (Sun ONE Web Proxy Server 3.6 UNIX version). We are now blocking ACTIVE X by HTML tags filtering (OBJECT TAG). Is there any way I could allow ACTIVE X on a particular website and how ?
Any information would be greatly appreciated.
thanks,
Jack

Hi Jack,
By proxying I mean enabling proxying of your new resource explicitly under the routing section of the administration interface. When you create a new resource the proxy will set by default the "Use default setting derived from a more general resource" option but depending on how you have configured proxying for the "entire server" resource or other additional resources you may need to explicitly enable proxying of that resource.
Chaining means forwarding your requests to other proxys. Again this can be configured on resource basis (pretty much anything you can configure in the proxy server can be configured on a resource basis)
So, whether you are filtering OBJECT tags for the "entire server" or the "http://.*" resources you can disable OBJECT tag filtering for a specific resource (i.e "http://foobar.your.domain/.*")
As for the registering of the dll file, I am not sure what you mean, can you please clarify? You don�t have to do anything else besides allowing the proxy to retrieve the activex object beeing referenced by the OBJECT tag.
Rui

Similar Messages

I need to know how to allow pop ups from a specific site.

I need to allow pop ups from a website for schooling purposes. I need to know what I have to do to allow these pop ups please. Thank you for your time.

Add an exception to '''Allow''' that website. <br />
https://support.mozilla.com/en-US/kb/Pop-up%20blocker#w_pop-up-blocker-settings

How to kill Active Data Request in DSO

Hi all,
I have 2 dsos ( A, B). Data loads from A to B.
Now I have deleted data from DSO B by using option delete data ( did killed one running request by turing the status to RED).
when I try to load data again to DSO B, it is not allowing me to execute the DTP.
Message is Request 257.617 is stil processing.
I am SAP BI 7.0 environment.
Please suggest how to kill active request ( I am not seeing it RSMO/SM37).
I tried to use Zombie Request FM, it didnt worked.
Thanks All,
Jason

Srinivas,
Thanks for the reply.
When I go RSRQ
I can see the request , the exception it is showing is CX_RS_FAILED logged.
SM51, when try to kill the process it says
SAP System Message:
Work Process restarted; session terminated
Apologies for earlier post messages saying that I did nt saw the message in RSMO, I can see it is in yellow process.
Please suggest how to kill the processes .
Apperciate your response..
Thank you
Jason

Urgent: how to really seperate business logic class from data access class

Hello,
I've this problem here on my hand and i really need help urgently. so please allow me to thank anyone who replies to this thread =)
Before i go any futhur, let me present a scenario. this will help make my question clearer.
"A user choose to view his account information"
here, i've attempted to do the following. i've tried to seperate my application into 3 layers, the GUI layer, the business logic layer, and the data access layer.
classically, the GUI layer only knows which object it should invoke, for example in the case above, the GUI would instantiate an Account object and prob the displayAcctInfo method of the Account object.
here is how my Account class looks like:
public class Account
private acctNo;
private userid;
private password;
private Customer acctOwner;
the way this class is being modelled is that there is a handle to a customer object.
that being the case, when i want to retrieve back account information, how do i go about retrieveing the information on the customer? should my data access class have knowledge on how the customer is being programmed? ie setName, getName, setAge, getAge all these methods etc? if not, how do i restore the state of the Customer object nested inside?
is there a better way to archieve the solution to my problem above? i would appriciate it for any help rendered =)
Yours sincerely,
Javier

public class AccountThat looks like a business layer object to me.
In a large application the GUI probably shouldn't ever touch business objects. It makes requests to the business layer for specific information. For example you might have a class called CustomerAccountSummary - the data for that might come entirely from the Account object or it might come from Account and Customer.
When the GUI requests information it receives it as a 'primitive' - which is a class that has no behaviour (methods), just data. This keeps the interface between the GUI and business layer simple and makes it easier to maintain.
When using a primitive there are four operations: query, create, update and delete.
For a query the gui sets only the attributes in the primitive that will be specifically queried for (or a specialized primitive can be created for this.) The result of a query is either a single primitive or a collection of primitives. Each primitive will have all the attributes defined.
For a create all of the attributes are set. The gui calls a method and passes the primtive.
For an update, usually all fields are defined although this can vary. The gui calls a method and passes the primitive.
For a delete, only the 'key' fields are set (more can be but they are not used.) The gui calls a method and passes the primitive.
Also keep in mind that a clean seperation is always an idealization. For example verify that duplicate records are not created is a business logic requirement (the database doesn't care.) However, it is much easier and more efficient to handle that rule in the database rather than in the business layer.

How to allow some fixed extension go in from outside to inside but not allow go from inside to outside

how to allow some fixed extension go in from outside to inside but not allow go from inside to outside
for example, allow JPEG, MOV, AVI data flow from outside to inside
but not allow JPEG, MOV, AVI files access or upload or get by outside, in another words not from inside to outside
how to configure?

Hi,
The ZBF link sent earlier show how we can inspect URI in http request
parameter-map type regex uri_regex_cm
pattern “.*cmd.exe”
class-map type inspect http uri_check_cm
match request uri regex uri_regex_cm
ZBf is the feature on Cisco routers and ASA though concepts are little same but works differently. However it is important that you can be more granular with the protocol (layer 7) inspection only. Like on ASA if you will try to restrict .exe file from a p2p application that won't be possible, But on router you have some application for p2p in NBAR and you can use it file filtering. Please check configuartion example for both devices.
Thanks

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

How to find active sessions count on a server in weblogic server console

Hi All,
I would like to know how to find active sessions count on a server in weblogic console. I am using weblogic 11g.
Regards,
Sunil.

On the deployment, monitoring tab, you can select web applications. Here the number of current sessions are listed per web application deployed on the domain.
The deployment itself (deployments, application, monitoring, sessions) shows a list of sessions and where it is located. Unfortunately, there is no aggregation (but that is something you can so yourself as well).
When you are using a load balancer in front, the count of sessions on per web application on the domain gives you some clue how many sessions there are present on each server.
That is to say, when load balancer is using round-robin (and does that correct), you can take the total number of sessions divide it by the number of servers.

How to allow the special character in folder or filename

when i add the special character "&" in folder or file name it gives following error
"The file or folder name "P&A" contains invalid characters. Please use a different name. Invalid characters include the following: ~ " # % & * : < > ? / \ { | }. The name cannot begin or end with dot and cannot contains consecutive dots."
how can i allow these character in folder or file name.
waiting

Hello to everybody
It's ok for the ~ " # % & * : < > ? / \ { | } characters, they cannot be allowed,
but in a lot of languages there are letters like è é à ù ò that are accepted for path and/or filename;
how to allow these characters? Moss indexes them but when doing some searches and clicking on these files, in the new internet explorer windows the file cannot be opened abd examining the url the è é à ù ò are replaced with other character.
Thanks in advance to everybody
Regards to all
Roberto GerlandoGerly

How to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?

how to send active links in email from firefox. Works in IE but not Firefox... Is there a setting to change?
== This happened ==
Every time Firefox opened
== Always

Check with your web mail service provider for help with that issue.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

How to get Active users list in Essbase 6.5.6

Hi Gurus,
How to get Active users list in Essbase 6.5.6 version
I dont find any Esscmd to find active users list....
i used LISTLOGINS command in ESSCMD but its not helping me out....
pls suggest me some approach to find active users list.
Thanks in advance....

Hi ,
Display sessions will give only active users details which are currently connected to the ESSBASE .
if you need this list ? or you need the total list of security active users list ?
if you need the currently connected to the ESSBASE
if you check one server At a time or you can check the application level also
1)server level
display session all;
2)application level
display session on application 'application name ';
go for the run command ---> essmsh-----> login;----->enter user name ----> enter password----->enter host (like server name ) then you need to you above 1 &2 commands
Thanks,
suresh

How to show active page in Spry Menu Bar using images

Hi,
I have already read this answer "how to show active page in spry menu bar" but I am using images, not text. I have mouse-over and mouse-out working in the Spry Menu Bar using image.png and image-over.png, but I cant' figure out how to get the image-over.png to appear on the active page since the spry menu bar is locked on the individual pages. (I tried to put it in an editable comment, but spry wouldn't go for it. :-)
Any ideas. Here is the code:
<ul id="MenuBar1" class="MenuBarHorizontal">
       <li><a href="../index.html" id="home" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','../images/all_pages/home-over.png',1 )"><img src="../images/all_pages/home.png" alt="Home Page" name="home" width="58" height="20" border="0" id="Image8" /></a></li>
       <li><a href="../show.html" id="show" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('show','','../images/all_pages/show-over.png',1)"><img src="../images/all_pages/show.png" alt="The Show" name="show" width="101" height="20" border="0" id="show" /></a></li>
        <li><a href="../team.html" id="team" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('team','','../images/all_pages/team-over.png',1)"><img src="../images/all_pages/team.png" alt="The Team" name="team" width="97" height="20" border="0" id="team" /></a></li>
        <li><a href="../company.html" id="company" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('company','','../images/all_pages/company-over.png',1)"><img src="../images/all_pages/company.png" alt="The Company" name="company" width="139" height="25" border="0" id="company" /></a></li>
        <li><a href="../beatles-tickets.html" id="tickets" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('tickets','','../images/all_pages/tickets-over.png',1)"><img src="../images/all_pages/tickets.png" alt="Tickets" name="tickets" width="75" height="20" border="0" id="tickets" /></a></li>
        <li><a href="../media.html" id="media" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('media','','../images/all_pages/media-over.png',1)"><img src="../images/all_pages/media.png" alt="Media" name="media" width="61" height="20" border="0" id="media" /></a></li>
        <li><a href="../news-reviews.html" id="news" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('news_reviews','','../images/all_pages/news_reviews-over.png',1 )"><img src="../images/all_pages/news_reviews.png" alt="News-Reviews" name="news_reviews" width="149" height="20" border="0" id="news_reviews" /></a></li>
        <li class="MenuBarHorizontal"><a href="../contact.html" id="contact" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact','','../images/all_pages/contact-over.png',1)"><img src="../images/all_pages/contact.png" alt="Contact Us" name="contact" width="79" height="20" border="0" id="contact" /></a></li>
     </ul>
Thanks so much for helping!
Cheers,
Janell

Just found this page:
Persistent Page Indicator
Update: Drat, it is for text menus only not using images. :-(
Cheers,
Susan

How to allow multiple wildcard elements in biztalk schema

Hi,
In my input xml, I can have one or more unknown elements in the xml. I know I can use <xs:any> in my schema for each of these elements but it does not work when there is unknown number of these unknown elements occuring in the input xml.
I know the location in xml where these unknown elements appear but I dont know how many times they appear in each location.
Any help on how to allow it would be very appreciated
thanks
manibest

Hi manibest,
You're trying to find a technical workaround on how to handle this in schema. But we have to understand that schema is to defining the structure and content of XML and you want a schema which is not going to define the content/structure of your
XML, its basically a flaw to conceive a Schema which has no relation to the XML.
Anyway what do you mean by " xml accepted by the schema" - As mentioned in the
other post you have raised today, if you don't enforce XML validation and if you don't bother about mapping this unknown fields across to the outbound schema or if your orchestration's processing is not bound to these unknown elements then you can
do use it.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to allow user print their draft anwsers before sending it as final ?

How to allow user print their draft anwsers before sending it as final in a form central questionnaire ?

Hey MTdev,
Panel close? events cannot be triggered on a VI being viewed or controlled remotely. Some more information on that can be found in the help here:http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/vi_panel_closeq/. My suggestion would be to set the Title Bar on the front panel of your remote VI to not be visible so that their only option for closing the window is to click the logout button. Are you using Remote Front Panels(http://zone.ni.com/devzone/cda/tut/p/id/3277) to do this instrument control? Using remote front panels allows you to manage a lot of the multiple people accesssing at the same-time type issues so it may be something to look into if you are not already using this method.
Regards,
Kevin
Product Support Engineer
National Instruments

How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?

Hi,
How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?
I need to give user an option to do so, without the intervention of any Administrator. I also do not want to make user a Administrator else he will be able to login in weblogic and can do any damages unknowingly.....
Regards,
Rahul

Hi,
Replace the line in the instantconfig.xml
<WebMessage name=”kmsgChangePasswordLink”><!–<HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML>–></WebMessage>
with
<WebMessage name=”kmsgChangePasswordLink”><HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML></WebMessage>

URGENT: How to allow ACTIVE X on a particular site?

Similar Messages

Maybe you are looking for