URGENT: How to debug non-reproducable problem(s) in ADF JSF application?

This is one of the most anoying things in programing.... We have JSF application developed by JDev 10.1.3 and deployed on AS. It works fine but almost once or twice per day users complain that, say on a certain page (could be any page) they click on a button or a link and nothing happens. Sometimes it looks like the browser is trying to open a page but never does and sometimes the link or a button is dead. I looked into log file under opmn/logs and could not find anything?
This is very urgent, so please, please if you have any hint on how to approach this problem, let me know. At this time I cannot file the Service Request with Oracle since they would ask me to create sample code and reproduce the problem which is just not possible.
please help.

Hi,
if you are on JDeveloper 10.1.3.0 then chances are that these are concurrency issues. If a user starts a long running query then others may be blocked by this. This is fixed in JSF RI that is contained in JDeveloper 10.1.3.1
Its just a guess. To prove my assumption, make sure you run the app with a single seat and see if the issue reproduces or exclude queries from the tests.
Frank

Similar Messages

How to debug DAQ VIs (problem with data)

I am trying to debug (and understand) the attached VI. I’m not asking anyone to analyze/debug it, since it is far more than an example; I am new to these forums and feel like asking such a thing would be inappropriate.
I would like advice on how to debug it. I am also going to describe my problem to see if the cause may be obvious to someone.
The outputs of the "Angle Calc" sub-vi are fed into a state machine. The state machine actuates outputs to move a motor and measures changing angles. It first moves up/down, then left/right. The attached VI is called by a top-level VI and the front panel is not usually open. For some reason, when the front panel is opened, it behaves differently when it is called. The behavior only changes for the right/left movements.
Here's where I'm hoping someone can point out some better debugging methods for me.
I have been using the Express Write to LVM File VI and the Convert to Dynamic Data function to write acquired data to text files for analysis after the acquisition has completed. Are there better methods recommended for doing this? I wish I could run through the code while recording the execution and then step through a playback of it!
As for the specific problem I am having...
In the "Right Find Stall" case, the signal wired from the "Angle Calc" VI (array size 100) is connected to a Max/Min Array function. When I log the data coming from the Min/Max function, I see an alternation between valid data and 0 (i.e. 12.2, 0, 13.3, 0, 14.0, 0, 14.5, 0...). When I log the data being fed into the Min/Max function I do not see 0s.
A guess of mine is that the array is empty and therefore no data is logged but Min/Max returns a 0 (not sure why this would happen). I also have no idea why this would ALWAYS happen with the front panel opened. I have seen the effect with the front panel closed, but never to the same degree; usually just a seemingly random zero or two but not a pattern of every other point...
Thanks all,
Dave
Attachments:
Functional_Test.vi ‏2710 KB

Angle_calc receives array controls in and passes array indicators out. It performs a trig function and a bit of multiplication.
I'll check out the Write to Spreadsheet File VI, haven't used it in the past. If it will allow me to write text out that'll be enough reason for me to stop using the Express VI.
I've used Execution Highlighting and stepping before but with the data acquisition by the time the application makes it around to the next read the DAQ card has sampled a ton of data and the data coming in is no longer useful (a different state should be active by then).
I do think the problem is related to the computer slowing down with the front panel open. I've logged the 'backlog' number of the Read function and found that the number in there is greater than 0 much more often when the VI's front panel is open and that I've seen relations between the 0s that I discussed earlier and the backlog going above 0 (usually the scan after a non-0 backlog seems to be a problem).
I need to familiarize myself with the DAQ basics, the buffer, backlog, and relation to sampling rate, etc.
In a simple VI I just wrote, I noticed that if I increased the sampling rate high enough, data being acquired into a chart cuts-out on a regular basis; instead of a smooth line, I see small dashes or dots of data (spaces in between). I don't understand this- I would expect data to be lost but not "no data" to be read in. I think understanding what is happening here would be helpful.

How to minimize Client-Server Round-trip in ADF Faces application ?

Hi All,
We have just finished POC on our prototype of ADF Faces + ADF BC application. The POC Emphasizes on Bandwidth requirement.
After receing the result from the communication provider, including : TCP packets send, Bytes sent from/to server and number of Client-Server Round-Trip.
There are several part of the application that Must be tuned for the application to run on acceptable performance.
Here is some page/ function that should be tuned :
- First page, ADF Read Only Table with two images and some buttons, cause 5 round-trip
- ADF Dialog Returning Value (as LOV), cause 4 Round-trips
- On ADF Form, press Commit button, cause 3 Round-trips.
So the question is :
1) How to reduce round-trips on ADF Faces application ?
2) How to minimize the bytes send from / To server on a specific user action ?
Please give me some recommendation..
Thank you very much,
xtanto

Hi Frank and Steve,
Thank you for your reply.
Yes Frank, what I mean by Round-Trip is the traffic between Client and the Server. And Yes, we will use VSAT where the latency is 1 - 1.5 second, so that round-trip matters significantly.
What I will do is :
- use minimal skin and No image at all
- don't use Dialog for LOV because it requires AutoSubmit there.
- Use 'Apply-Changes' button to do server-side validation before Commit.
Then do the POC / testing again.
Thank you,
xtanto

How much memory and CPU requirement to deploy ADF Faces application ?

Hi All,
Is there any formula or docs to help me to determine how much memory and CPU requirement for IAS server, to deploy ADF Faces application ?
How much memory / CPU GHz required per 1 user ?
We plan to develope web based ERP application using ADF Faces and ADF BC.
Pleasssee.. give me any aclue.. I need it so badly..
Thank you for your help,
xtanto

xtanto,
there is no formular for this. Note that it is not only ADF Faces but th emodel layer in particular that adds to this requirement.
Frank

Very Urgent--- How to Convert Non Valuated stk into Valuated

Dear GURU'S
Actually for a material A when i see the stock in MM03 in accounting tab i see less stock then when i see in MMBE
i.e in MMBE if i select Material A and Plant B(Which is depo in my case) i see stock as 39
but for same material MAterial A and Plant B ,if i see in MM03 --in accounting tab i m able to see less stock i.e only 1
============================================
Well the problem is In MM03 I cud see only valuated stk i.e qty as 1
And in MMBE for a partiocular material for a particular plant the stock was 39
i.e Here i am getting Valuated + Non valuated stock
i.e i am getting difference of 25
=====>>>
To get into the root cause
I have gone to MB5B where i can get all the transaction that has been done on this material with movement type also i got the intial stock ,Goods recpt ,Goods issu and total stock
No for a particular material
In MB5B it is showing
Stock on 01.01.2005    = 38
receipts total               = 238
Issues total                  =237
Stock as on 18.02.2008 = 39(which is equal to Stock in MMBE)
=============>This is for valuated +Non valuated stock
Where as if i want to see only valuated stock it was showing
receipts total      = 238
Issues total         =237
Stock as on 18.02.2008 =1 (which is equal to stock in acctg view in MM03)
====================>This is only for Valuated Stock
======================================
Now how to solve this :
The initial qty(38) which has been posted it was at the begining that is at the start of the project
And the people who have posted it ,it was non valuated
that is the reason it is showing difference in MM03 and MMBE
First thing
How can i see on which date this initial stock has been posted
Second Query
How to convert this non valuated stock into Valuated stock
So that the quantity in MMBE and MM03 gets matched
Willl award 10 Points if my problem gets solved
THANKZ IN ADVANCE
REgds
Shailesh

Dear friend
Actuallly i have checked the history of that particular Item in MB51
I have gone through all the documents created for this material
Now this material also exist in DEPO which is located at chennai and plant is at mumbai
So Initially in the year-2006(31-10-2006) whater documents are created i.e STOP has been created and delivery has been made (Mov type-601)
are non valuated stock ,means they have been posted without any valuation
But from year 2007(01.02.2007) the documents whiohc have been posted are valuated
i.e is the reason when i am executing transaction MRN9 to check the history of valuated stock
I cant see non valuated stock
Well now how to do the valuation of this stock which have been posted in year 2006 so that
In MMBE and MM03 there is no difference of stock
Plz hepl
regds
shailesh

Urgent:How to manipulate the below problem

I am dynamically writing a PL/SQL blok. as follows--
problem areas marked in bold.
     l_statement :=
' DECLARE'                                    ||
'      TYPE record_type IS RECORD ('          ||
          Col_Desc_Pkg.record_defn || ');'     ||
'      l_record record_type;' ||
'      l_ref_cur Col_Desc_Pkg.CURSORTYPE;' ||
'     rec_count NUMBER;                    '     ||
'     dcl_stmt VARCHAR2(32000);          '     ||
'     dml_target_insert VARCHAR2(5000);'     ||
'     l_temp_var          varchar2(100);'     ||
' BEGIN' ||
' l_ref_cur := NewDataCleanUp.REF_CUR;'      ||
' LOOP' ||
' FETCH l_ref_cur INTO l_record;'      ||
' EXIT WHEN l_ref_cur%NOTFOUND;'      ||
'     dcl_stmt := '' '||Create_Dcl_Stmt(TargetT)||' '';'|| --My problem area
'           DBMS_OUTPUT.PUT_LINE(dcl_stmt); ' ||
' END LOOP;' ||
' CLOSE l_ref_cur;' ||
' END;';
FUNCTION Create_Dcl_Stmt(TargetT VARCHAR2) RETURN VARCHAR2 IS
l_dcl_stmt VARCHAR2 (5000);
l_col_name VARCHAR2(50);
counti     NUMBER;
BEGIN
     l_dcl_stmt := ' SELECT COUNT(1) FROM '||TargetT||' T WHERE T.';
     FOR counti IN 1..g_Column_Name_Arr.COUNT LOOP
          l_col_name := g_Column_Name_Arr(counti);
(M1)     l_dcl_stmt := l_dcl_stmt||l_col_name||' =''l_record.col_'||counti||'||'' AND T.'; (/M1)
     END LOOP;
     l_dcl_stmt := RTRIM (l_dcl_stmt, 'AND T.');
     l_dcl_stmt := l_dcl_stmt||';';
     RETURN l_dcl_stmt;
END;
now when i execute the aboove i get the query as below
SELECT COUNT(1) FROM HIST_PORTS_MASTER T WHERE T.PORT_ID =1041 AND T.PORT_STATUS =processed;
but i want that each of the values be enclosed in singke qoutes as T.PORT_ID ='1041' .
Trying to edit line M1 does not work. The value 1041 comes when the ''l_record.col_'||counti||'||'' is dynamicaly executed. how do i put single quotes around a value already in single quotes.??????

By doubling / tripling... them. Play around with your erroneous part of the string. You'll get a feeling for it.

(Urgent) How do I fix this Problem

I am using Oracle Forms 9iDS
How can I use the following fonts:
Monotype Koufi Bold : KOUFIBD.TTF
Arabic Transparent Bold : ARTRBDO.TTF
Tahoma : TAHOMA.TTF
I need a step by step procedure
Any Suggestion will be appreciated

Contact Apple > Contacting Apple for support and service

Problem with deployin adf-db application to tomcat

Thank you for reading my post
I have problem in deploying application into tomcat.
i create a war deployment profile and create the war file (about 20meg) now that i deploy it inot tomcat , all i get is an exception like the following.
I think Jdeveloper does not include one of required jar files.
can some one tell me which jar file i need to add manually?
Thanks
Sep 9, 2006 9:46:06 AM org.apache.catalina.core.StandardContext listenerStart
SEVERE: Exception sending context initialized event to listener instance of class com.sun.faces.config.ConfigureListener
java.lang.NoClassDefFoundError: oracle/jbo/JboException
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
     at java.lang.Class.getConstructor0(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:731)
     at com.sun.faces.config.ConfigureListener.configure(ConfigureListener.java:418)
     at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:348)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3729)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4187)
     at org.apache.catalina.manager.ManagerServlet.start(ManagerServlet.java:1175)
     at org.apache.catalina.manager.HTMLManagerServlet.start(HTMLManagerServlet.java:527)
     at org.apache.catalina.manager.HTMLManagerServlet.doGet(HTMLManagerServlet.java:104)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Unknown Source)

Do i need to do anything about datasource ,etc etc in tomcat ?
now i can run my application in tomcat but still have problem i think this problem is about Data problem
it opens all pages that has no data binding but the pages that need database stuff are shown this exception.
Sep 10, 2006 1:58:12 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet Faces Servlet threw exception
javax.faces.el.PropertyNotFoundException: Error testing property 'inputValue' in bean of type null
     at com.sun.faces.el.PropertyResolverImpl.isReadOnly(PropertyResolverImpl.java:274)
     at oracle.adfinternal.view.faces.model.FacesPropertyResolver.isReadOnly(FacesPropertyResolver.java:124)
     at com.sun.faces.el.impl.ArraySuffix.isReadOnly(ArraySuffix.java:236)
     at com.sun.faces.el.impl.ComplexValue.isReadOnly(ComplexValue.java:209)
     at com.sun.faces.el.ValueBindingImpl.isReadOnly(ValueBindingImpl.java:266)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:211)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.FormElementRenderer.renderAsElement(FormElementRenderer.java:155)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.InputLabelAndMessageRenderer.getLabelFor(InputLabelAndMessageRenderer.java:53)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer$Label.getForId(LabelAndMessageRenderer.java:500)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.OutputLabelRenderer.encodeAll(OutputLabelRenderer.java:69)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.delegateRenderer(CoreRenderer.java:271)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer._renderLabelCell(LabelAndMessageRenderer.java:222)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.LabelAndMessageRenderer.encodeAll(LabelAndMessageRenderer.java:159)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.InputLabelAndMessageRenderer.encodeAll(InputLabelAndMessageRenderer.java:94)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:159)
     at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
     at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:473)
     at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:253)
     at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
     at oracle.adfinternal.view.faces.renderkit.RenderUtils.encodeRecursive(RenderUtils.java:42)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeChild(CoreRenderer.java:232)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeAllChildren(CoreRenderer.java:255)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.renderContent(PanelPartialRootRenderer.java:65)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.renderContent(BodyRenderer.java:117)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.PanelPartialRootRenderer.encodeAll(PanelPartialRootRenderer.java:147)
     at oracle.adfinternal.view.faces.renderkit.core.xhtml.BodyRenderer.encodeAll(BodyRenderer.java:60)
     at oracle.adfinternal.view.faces.renderkit.core.CoreRenderer.encodeEnd(CoreRenderer.java:159)
     at oracle.adf.view.faces.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:624)
     at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:645)
     at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:568)
     at oracle.adf.view.faces.webapp.UIXComponentTag.doEndTag(UIXComponentTag.java:100)
     at org.apache.jsp.serviceMan_jsp._jspx_meth_afh_body_0(serviceMan_jsp.java:314)
     at org.apache.jsp.serviceMan_jsp._jspx_meth_afh_html_0(serviceMan_jsp.java:240)
     at org.apache.jsp.serviceMan_jsp._jspx_meth_f_view_0(serviceMan_jsp.java:185)
     at org.apache.jsp.serviceMan_jsp._jspService(serviceMan_jsp.java:147)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at webui.common.CharacterEncoding.doFilter(CharacterEncoding.java:26)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:105)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:167)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Unknown Source)

How to send an e-mail from an ADF BC application?

Hi all,
I have a requirement of sending e-mail from my ADF BC application.I am using JSF and Jdeveloper 10.1.3.3.0.
Can anyone please help me out?
Thanx in advance,
Arijit

You can do it easily, there are 2 ways;
1- add a mail class and call its method from a managed bean. (viewcontroller) sample: http://www.javacommerce.com/displaypage.jsp?name=javamail.sql&id=18274
2- write a stored procedure and create a view object in model side. Then use this viewobject. (model) reference: Oracle UTL_SMTP plsql package , sample: http://www.oracle-base.com/articles/9i/EmailFromPLSQL9i.php
Mucahid

How to debug sercued web service client ?

I ususally use TCPMon or Jdeveloper Http analyzer to debug non-secured Java SE web service client application . however, how do I debug secured web service client, e.g. web service with OWSM policy enable service?
I tried and got bad certificate error since the TCPMon or Jdeveloper Http analyzer act as proxy.
BTW, I'm not able to install any such proxy on server side.
Thanks

Hi,
As far as i know. the only way to debug a webservice is from SE80.
open your webservice from se80,
Give your REQUEST as an XML file,(put a break point in side ur web-class)and analyis ur RESPONSE.
you are using RFC but it seams that problem is not in that function module else you can use SRDEBUG tcode to debug remote enabled function module.
If you are getting error in CALL TRANSFORMATION.
The only posibility is the data u r passing it for converting it in XML.
just post your code with CALL TRANSFORMATION or the point which is going into dump....
Regards,
Raj

How To: Debug missing Drivers in MDT

The definitive post on missing drivers in MDT (most comprehensive list I've done so far)…
Please to NOT post questions from this thread, instead create a new thread.
How to debug Network Driver Problems
One of the earliest hurdles an MDT administrator will come across is the management of device drivers, specifically networking drivers. With most other drivers, like Audio, printer, and video drivers, a quick call to Windows Update or install over the network
will resolve the Installation. However unless the Network (and storage) Drivers are installed into Windows from the start, it will be much more difficult to install the rest of the system.
This post should help you get started if you find a machine that did not install a device driver properly, and you want to know how to find and import the correct drivers.
Installing network drivers in the
full OS
Step 1 - Try network connection again
It's possible that you might get a DHCP error from MDT, but when you try again later to connect the Deployment Share it works! This may be caused by a slow or malfunctioning DHCP server in your network. Re-check your DHCP servers, ensure that PortFast is enabled
on your routers. If all else fails get your network administrators to document the DHCP delay. A long delay in modern networks is unnecessary.
Step 2 - Verify connectivity
You may not have a driver problem but a network problem. Check the physical connection on the computer (Network installs on MDT *REQUIRE* a wired network connection, no Wi-Fi). Open a web browser. Check the IP Address (ipconfig.exe /all). Ping the Deployment
Server, manually connect to the Deployment Share. IF you can't connect to the Deployment Share, neither can MDT.
Step 3 - Find the Correct Driver Package
Before you load the driver into MDT, first verify that you have the correct driver. There are scenarios where you may *think* you have the correct driver, but the driver will never run because the package is designed for a different OS/SKU/Platform/whatever.
Install the driver package by:
  ○ Open the Device Manager (devmgmt.msc).
  ○ Find the network device in the list (ensure this is the wired device, not the wireless device)
  ○ Right click on "Properties" and click on the "Details" tab.
  ○ From the "Details" tab, select the property "Hardware Ids" select all the values, and copy to the clipboard, it would be a good idea to save for later. Should look something like:
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA&REV_04
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA
      PCI\VEN_8086&DEV_1502&CC_020000
      PCI\VEN_8086&DEV_1502&CC_0200
  ○ From the "Driver" tab, click on "Update Driver…", click on "Browse my computer for driver software" locate the driver package on the local machine or USB Drive, and install the package.
  ○ You should get a confirmation that the driver package was installed.
  ○ IF you do not get confirmation, MDT driver installation may not work.
Windows will install the driver starting with the *.inf install package, and will typically include a *.sys (binary) and a *.cat (digital Signature). If the driver package has been re-packaged into a *.cab, *.zip, or other compressed *.exe file, the
package must be extracted first. This is a hard requirement for any driver used by MDT and/or SCCM. All driver packages that are signed by Microsoft (WHQL) will be installed from the *.inf file, and you should only use devices that have the Microsoft WHQL
Logo as a sign of quality.
If you need a help on where to find driver packages for your devices, the 3 largest Computer OEM manufacturers supply drivers grouped by Make and Model that are easily imported into MDT and SCCM. See:
http://deploymentbunny.com/2014/07/08/back-to-basicwhere-to-find-drivers-for-servers-and-clients/
Step 4 - Load driver into MDT
If you have more than 20 driver packages, or if you anticipate you will have more than 20 drivers, you should start grouping your drivers in sub-folders for organization. One popular method is to group by Computer Make and Model. Ensure that you are using the
correct Driver Selection Profile in your task sequence. If you are unsure, disable any selection profile(s) to ensure the driver is installed correctly.
Step 5 - Run the full MDT installation
During installation MDT will perform the following:
  ○ Run the PNPEnum.exe utility and capture output to PnPEnum.xml. The VEN_Xxxx and DEV_Yyyy from the "HardwareIDs" property above must be present in this list. Otherwise we won't have a match.
  ○ Search through the %DeployRoot%\control\drivers.xml file looking for a match for the HardwareID. MDT may filter the search based on the folder search type.
  ○ MDT will copy each matching driver to the local c:\drivers directory using the xcopy.exe command. You can search (grep) for the string "xcopy" in the ZTIDrivers.log file, that will get you list of all driver packages matched by MDT.
  ○ MDT will allow the machine to boot into the NEW OS, and Driver Installation will begin in the OS. IF there are multiple drivers found and copied locally, the Windows (not MDT) will determine the best one. The c:\windows\inf\SetupAPI.*.log files
will detail which drivers copied locally were installed (or *not* installed).
Installing Network Drivers in
WinPE
Step 6 - Try the network connection again
(See above
Step 7 - Verify Connectivity from within WinPE
Verifying network connectivity will be a bit more difficult in WinPE, since we have a limited User Interface, so all investigation must be done in the debugging mode (Press F8) cmd.exe
  ○ Try connecting to the Deployment Share:
  c:\> net use * \\MDT\DeploymentShare$ /u:UserDomain\UserName *
  ○ Try pinging the Deployment Server:
  c:\> Ping.exe MDT.Corp.contoso.com
  ○ Verify that you have an IP address ( ipconfig /all ) If you have an AutoConfiguration address - Driver OK - WinPE can't reach the DHCP server. If you have "Media Disconnected" - Driver OK - Physical adapter not plugged to network. If
no devices are listed - Driver bad - Driver not installed.
  ○ Check the x:\windows\system32\WpeInit.log - This log will show the network driver (if found) being installed.
Step 8 - Verify driver packages are getting included into WinPE
Firstly, verify the correct driver package from within the full OS above. By default MDT will import *all* Storage and Networking drivers into your WinPE image. However it is possible to change the subset of files copied via "Selection Profile" or
other method. Cross check your WinPE Driver Settings.
  ○ From within the MDT console, right click on the root of your Deployment Share and select properties.
  ○ Click on the "Windows PE" tab, and the "Drivers and Patches" sub tab for both x86 and x64.
  ○ Your Network Drivers package must be in the "Selection Profile" if enabled.
Finally verify that the correct Network Driver package is being copied to WinPE. If necessary this may include setting up a debugger to watch the MDT Provider build the WinPE Image from scratch. My preference is to use the SysInternals
http://live.sysinternals.com/Dbgview.exe tool.
  ○ Open up the MDT console.
  ○ Download and run the DbgView.exe tool.
  ○ Update the deployment share in question.
  ○ The DbgView tool should show what drivers were copied to each WinPE Image.
Other
Whenever you add a driver into the MDT console, you must update the deployment share for that drivers to be added to your WinPE Image. If you are unsure, select "Completely regenerate the boot images." to ensure the drivers is imported. Additionally,
you must copy the updated LitetouchPE_x??.wim and *.iso files to the other consumers of the WinPE image like WDS/PXE and or any USB offline media.
Note that some Broadcom NetXtreme class of drivers have a multi-function driver architecture that may have difficulty loading in WinPE. Ensure that you load the "RIS" class of drivers from Broadcom in your MDT environment.
Note that by default MDT does *NOT* support the installation of Windows over Wireless network devices (Wi-Fi). The MDT installation sources must either be available through wired networking, or offline (USB Flash) media.
This post does not discuss origination of drivers within MDT ( Chaos vs. Total Control ), that is a different topic.
http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
Further Help
If you are still having problems with drivers in via MDT, ask the experts in the MDT Technet Forum:
Include a short description of the problem. Including the Make/Mode if necessary.
Include the HardwareIDs from the Device Manager (Devmgmt.msc) into the post (from above).
Copy your known good driver package (step 3 above) to OneDrive.
Copy the following log files to a public site like OneDrive and include the link:
  ○ PnpEnum.xml (from Client)
  ○ Bdd.log (From Client) - or at least the ZTIDrivers.log file.
  ○ c:\windows\inf\SetupAPI.*.log (from client)
  ○ %DeployRoot%\control\Driver*.xml
  ○ %DeployRoot%\control\SelectionProfile*.xml
  ○ %DeployRoot%\control\settings.xml (if problems in WinPE)
  ○ x:\windows\System32\WpeInit.log (if problems in WinPE)
  ○ If the MDT server is not including your driver package in WinPE include the DBGView log.
This post is by Keith Garner - Keith was a developer on the MDT team where he developed the ZTIDrivers.wsf script, he also worked for the Windows Hardware Quality Labs as a technical PM on Driver Quality, and developed samples for the
Microsoft Device Driver Kit (DDK) specifically around the area of Device Driver installation in the OS (Windows NT 5.0, 2000 and Windows XP). (So yes, I know drivers :^).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

OK. I have redone the drivers for WinPE which has reduced the image size by about 200MB. Unfortunately the problem persists.
Is there anyway to turn on some sort of boot logging so I can see what driver it is failing on?
I am also still seeing the weird behavior of it working over PXE but blue screens when booting from USB. Can anyone explain that?
JJ

++ Debugging ACR Installation Problems ++

If Photoshop CS2/Bridge is not working correctly after you attempt to install ACR (Adobe Camera Raw) 3.1 or higher, here a some hints on how to debug common installation problems.
1. Make sure that "Camera Raw" appears exactly once in Photoshop's "About Plug-in" menu. If it appears zero times, you did not install the plug-in in a correct location. The correct location is shown below. If it appears more than one time, you have multiple copies of the plug-in installed.
The new location for Adobe Camera Raw 3.x and 4.x is:
>Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
b Note: that the Library folder refered to above is that found at root level and NOT the User/Library folder.
>Win: \Program Files\Common Files\Adobe\Plug-ins\CS2\File Formats\
2. If "Camera Raw" appears exactly once in the "About Plug-in" menu, then pick that item and make sure the Camera Raw about box shows version 3.1 or higher. If not, you have the wrong version of Camera Raw installed.
3. Run Bridge and pick "Camera Raw Preferences..." from the Bridge(Mac) or Edit(Win) menu. If the command is grayed out, then you don't have Camera Raw installed in the correct place. If the Camera Raw preferences dialog does not have "Version 3.1 or higher" in the title bar, you have the wrong version of Camera Raw installed.
If after you verify that that 1, 2 and 3 are correct, and you are still having problems (e.g. generic raw image icons in lieu of thumbnail previews), then next step is to purge the Adobe Bridge cache for any folders you are having problems with. The command to use is:
"Tools->Cache->Purge Cache for this Folder".

Understood guys. But let me make a few points.
1. Clearly I'm not the only one who had this problem. In fact, I wasn't the first person in this THREAD to have the problem.
2. I'm fairly computer savvy, and have worked with Photoshop for several years.
3. Yes, it does say c: in point 3, but I find it odd that in point 4 it does say Program Files/.... A very strange way to write it. Also, the c: drive is the default installation drive, so it's not idiocy for someone to assume that the file would be located on the same drive as you selected for installation.
4. This is not about technically right or wrong. I never said that the instructions were wrong. I merely was trying to make a suggestion that would help people avoid the same trap I fell into. Was it my mistake? Yes. Would my clarifying suggestion perhaps help others avoid making the mistake I did. I would hope so. Also, as someone else suggested in this thread, Adobe SHOULD have written an installation program for the ACR 3.1 upgrade that did the placing automatically. After all, EVERYONE knew that ACR3.1 would be released shortly after the release for CS2...in fact Mr. Knoll himself was quoted in other forums about when D2X compatibility would actually happen.
5. The purpose of these forums is to be helpful to other users--not to be patronizing or rude. I'm a big Photoshop fan, and a loyal customer. I'm also in the service industry, and I would bet that customer service experts would raise an eyebrow or two about the tone contained in certain messages in this thread, including from an Adobe employee.
Just my two cents. Flame away if you must. But you might want to take a look at what I actually suggested in my last message before lighting up the torch.

I have a Windows 8.1 machine. I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

I used a projecteor a while back in a Power Point presentation. Now my menus for Adobe are very small and hard to read. The print command is so compressed that I cannot read or use it. How do I fix this problem?

There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

Garamond font is turned off. I restored it but it's not showing up in Pages. How do I correct this problem?

Garamond font is turned off when I installed OS X Mavericks. I restored it but it's not showing up in Pages. How do I fix this problem?

Try opening up:
/Applications/Font Book
Scroll to the Garamont Font, then try File > Validate font
If this doesnt work, right click (or control + click) the font and select show in finder. Makes sure it is not located in the /Library/Disabled Fonts/ folder

HT2542 Hi, I created a new user on mac, Admin but i can't use adobe CS6 while the original user is admin too and all programs are running normal. How can i solve this problem?

Hi, I created a new user on mac, Admin but I can't use adobe CS6 while the original user is admin too and all programs are running normal. How can I solve this problem?

Hi Amanda,
Software applications are usually installed in the Applications folder on the Macintosh HD and are accessible to all users.
I would advise you to check the Applications folder and see if your software is in there.
Next step would be to Control Click or Right Click on the application and choose "Get Info" and make sure the permissions are set to "Read & Write" for all users. The article below provides more details:
Troubleshooting permissions issues in Mac OS X
http://support.apple.com/kb/ht2963
You may need to contact Adobe Support if this does not resolve your issue:
http://helpx.adobe.com/photoshop.html
Hope this information helps!
- Judy

URGENT: How to debug non-reproducable problem(s) in ADF JSF application?

Similar Messages

Maybe you are looking for