Urgent: IDOC to EDI with SAP Conversion Agent

Hi,
I have a requiremetn like IDOC to EDI ( Gentran ) scenario.
We have decided to use SAP Conversion Agent to deal the same.
Can anybody share their experiences on this kind of scenario.
Needed step by step information to complete would be appreciated with the full of points.
Cheers.,
E

check with tis may helpful for you
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
Regds
Abhishek

Similar Messages

  • Sender Mail Adapter with SAP Conversion agent

    have some1 used SAP conversion agent on attchment from XI Sender Mail adapter?
    it seems to ignore the attchment of the e-mail
    the sender configuration module tab is as follows :
    1.localejbs/AF_Modules/PayloadSwapBean transform
    2.localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean CM
    3.sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail
    The paramters are
    transform swap.keyName Content-Disposition
    transform swap.keyName Content-Description
    transform swap.keyValue attachment
    transform swap.keyValue codeco
    CM TransformationName ZIM_CODECO_VALIDATIONS
    The Convesion Agnet runs prefectly when using the Conversion Agent engine
    thx,Shai Rosenzweig

    check with tis may helpful for you
    http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
    Regds
    Abhishek

  • SAP Conversion Agent - Performance Tuning

    Hi Experts,
    We are working with SAP Conversion agent..we have developed several scenarios on that...
    But, Now we are worried about the performance issues on the same.
    Can anybody share their experience on SAP Conversion Agent and any performance tuning guide on SAP Conversion Agent.
    -S

    Hi,
    /people/bla.suranyi/blog/2006/09/29/conversion-agent--handling-edi-termination-characters
    Conversion Agent
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
    Thanks,
    Madhu

  • SAP Conversion Agent

    Hi,
    I have browsed the net for quite some time to get some idea about EDI message handling in XI using the SAP Conversion Agent (CA). I have understood what is CA all about. but i still have few questions unanswered.
    1. How flexible or complex it is to use the the CA as compared to SEEBURGER ?
    2. It is a must to use the EDI message parsing templates provided in the CA library ?
    3. the cost factor. I have read that it is free for development and test landscapes. but for production landscape, we need to pay some license fee. Will this deprive us of any key functionality in the Dev and QUA landscape ?
    I have gone throught the help document. Please help me find answers for the above questions.
    Thanks,
    Hari

    Hi SreeHari,
    Please refer to the link below,which might help you.
    [SeeburgerVsConversion Agent |Re: Seeburger EDI conversion Vs XI Conversion Agent EDI conversion?;
    Regards,
    Madhu

  • SAP Conversion Agent Studio Preview Version

    Hi,
    Does anyone have knowledge about SAP Conversion Agent Studio Preview Version?
    I've downloaded it from SDN and it says it comes with an Eclipse version, but i doesnt.
    When i try to point it to my existing Eclipse it says it needs version 2.1.2 oe 2.1.3. of Eclipse, but these are quite old. They can be downloaded from a 2004 archive site. (?)
    Are there newer version of the SAP Conversion Agent Studio Preview Version?
    Any suggestions are welcome.
    Thx
    Robert

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • SAP Conversion Agent: HL7 library project could not be executed

    Hi experts
    I'm using SAP Conversion Agent version 4.3.0 on a PI 7.0. I'm trying to use a HL7 library project. On the Conversion Agent Studio side everythings works fine: the library project is created and a test of the service with a local HL7 file was successful. After that I make the project on the Conversion Agent Studio available and copy the project from the local \SAP\ConversionAgent\ServiceDB directory to the PI Conversion Agent ServiceDB directory.
    So far so good... but when I try to execute the CA project via File Sender Adapter the following error is thrown:
    "Invalid service 'TEST'. Check service name and service database"
    Module Exception 'com.sap.aii.af.mp.module.ModuleException: <Status><severity>4</severity><description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description><log_file>file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</log_file><Event error_code="401024" severity="error_fatal">
    <description>Invalid service 'TEST'. Check service name and service database.- for more information see file:///usr/sap/DXI/ConversionAgent/CMReports/Tmp/2009-12-23/nonexistent_U-_-63-4b17e36f-5e83/Events.cme</description>
    <time>N/A</time>
    </Event>
    </Status> caused by: com.itemfield.contentmaster.CMException' found, cause: com.itemfield.contentmaster.CMException
    I also created another parser project, without HL7 libraries, this works also on Conversion Agent Studio and on PI side without any problems.
    Do you have any ideas?
    Thx,
    manuku

    Hi Conversion Agent experts,
    Do you have any ideas?
    Thx
    manuku

  • XI supports EDIFACT without SAP Conversion Agent and others.

    Hello.
    Somebody knows the best way to convert EDIFACT message using XI?
    What I can do this without using softwares of conversion like:
    - SAP Conversion Agent;
    - Seeburger;
    - BIC Mapper and others.
    Thanks very much in advance.

    Hi,
    See for converting the EDI XML to EDI you need to have a mapping program at the adapter module which does the conversion. For this module you need a BIC tool of seeburger which provides the different module program for EDI to XML and XML-EDI. This program needs to be deployed on XI and through adapter it has to be called for conversion.
    Here is the link for your reference:
    /people/ricardoandres.maienza/blog/2007/04/06/edifact-to-xml--stylus-studio-solution
    http://www.stylusstudio.com/edi/EDIFACT_translate.html
    The steps to convert EDI to XML / XSD can be found at the following link:
    http://www.stylusstudio.com/edifact_to_xml.html
    Stylus studio download link: http://www.stylusstudio.com/xml_download.html
    Thanks and Regards,
    Chirag Gohil

  • How to download SAP Conversion Agent 7.1 by Informatica

    Hi Gurus,
    I tried to download SAP Conversion Agent 7.1 by Informatica from following location
    Sap Software Download Center---->Browse Our Download Catalog----->Installations and Upgrades----->Adapters----->Informatica----->SAP CA For SAP Netweaver 7.1
    but its showing No data available. Can anybody help me how to get this conversion agent.

    Well, I see it like this and everything work for me:
    Are you logged in with your S-user account? Also I think you have to be authorized for downloading the software. Can you check under your profile, if you have some authorizations?

  • How to download to SAP CONVERSION AGENT

    Hi,
    Im unable to find SAP CONVERSION AGENT software in SAP marketplace.When i go to the following link
    SAP Software Distribution Center
        Download
            Support Packages and Patches
                Entry by Application Group
    SAP NetWeaver ->
    is shows as Data unavailable.Request your help on this.
    Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu

    HI Bhargav
    Try out this
    SAP Software Distribution Center
    Download
    Support Packages and Patches
    Entry by Application Group
    SAP NetWeaver ->SAP Netweaver->SAP NETWEAVER04->ENTRY BY COMPONENT->PROCESS INTEGRATION--> CONVERSION AGENT1.0
    It is working
    Thanks
    Abhishek Mahajan
    ***Please reward points if helpful**

  • SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

    Hello
    I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
    In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
    Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
    Thanks
    Christoph

    Hi Mark
    Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
    C:\Documents and Settings\pi1adm>CM_console -v
    Engine-Version: 8.6.0(Build:30)
    Engine-Syntaxversion:4.00.10
    I will oben a ticket for that ...
    Regards
    Christoph

  • INVOIC96a to EDI-XML by Conversion Agent fails, Special Character Problem

    Hi,
    with your help in another thread, I recognized that the EDIFACT INVIOC96a Parser of the Itemfield Conversion Agent has a Problem with special characters.
    So like described in this blog SAP XI supports EDIFACT i created a Library Project and tried to test the conversion.
    It is only working when no special characters are in the EDI file. If there a special characters insight the file, conversion agent say's no error, but the xml file is corrupted. In fact you can't display it in IE or by opening it with XMLPad it says "Not well formed".
    Hope that someone has an idea for this problem
    Thank you
    regards

    Hi,
    I have already faced the same problem when using Itemfield Conversion Agent.
    I solved the same with change properties of the project.
    In conversion agent project :
    opne the menu :  Project --> Properties --> Encoding --> Change the output Encoding Schema (None).
    use None in that schema in place of XML.
    Your problem can be solved.
    Regards,
    Sandeep Kaushik

  • Error in XI while using standard EDI Libraries of Conversion Agent

    Hi,
    We are planning to use conversion agent for EDI to XML conversion using standard libraries.
    Right now working on EDI 867 and is working fine in my local system. But when we moved the contents
    to XI server, we are getting the following error
    *“ConversionAgent/ServiceDB/TS_867_Product_Transfer_and_Resale_Report_Parser/TS_867_Product_Transfer
    andResale_Report_parsers_segments.tgp(547): is_optional is not a known profile or PT”*
    Can anybody help us to solve this issue?
    Regards,
    Ravi

    HI,
    The module name must be localejbs/sap.com/com.sap.nw.cm.xi/CMTransformBean.
    The parameter name must be TransformationName.
    The parameter value must be the conversion agent project name deployed in serviceDB. In the above example, the Tutorial_3 project from the documentation in step 1 is used.
    And also it was failed to update the log.See the folder access onceagain.
    many links provided in that blog itself ,plz check.
    Regards
    Chilla..

  • SAP CONVERSION AGENT - XPATH not found in DATA HOLDER?

    Hi Eperts,
    I'm trying to work on this Tool, getting some problem in Conversion Agent Studio..
    I Had created my project with PARSER in Conversion Agent, source file will be Pipeline separated Text File , which has multile rows...And I had created XSD for my Message Interface in XI..
    When i'm defining my ANCHORS/MARKERS/CONTENT/ .
    getting error in DATA Holder, I'm not able see my Schema / XPATH in the respective namespace...
    Could anyone can guide me pl.
    Thanks in Advance..
    regards,
    vasantj.

    Hi vasantj,
    Did you manage to resolve this issue?
    I face the same problem.
    Please ellaorate.
    Nimrod.G

  • SAPOSCOL does not start with SAP Host Agent processes

    Dear all,
    on one of our servers the SAPOSCOL process is not running. The latest SAP Host Agent is in place - automatic updating has been finished sucessfully but after the restart of the host agent processes SAPOSCOL returned the following entry in log dev_saphostexec:
    [Thr 01] Fri Nov 25 11:23:30 2011
    [Thr 01] *** WARNING => /usr/sap/hostctrl/exe/saposcol -l -w60 pf=/usr/sap/hostctrl/exe/host_profile exit with status 4 [OsCollectorW 171]
    It is only a warning but as a consequence no SAPOSCOL process is running.
    Any ideas? Your quick response will be very much appreciated
    Regards,
    Mattias Umlauf

    Hi
    if
    /usr/sap/hostctrl/exe/saposcol -status
    shows no PID but shared memory attached either cleanipc
    or try to force start saposcol
    /usr/sap/hostctrl/exe/saposcol -f
    Regards
    Stanislav

  • Security Provider(JAAS chaine module)logging with SAP J2EE Agent Policy 2.2

    Hello,
    I have installed and configured a SAP J2EE Policy Agent 2.2 on a SAP J2EE Application Server 7.0 and installed an opensso 8.0.
    I have configured and deployed a jsp application with the descriptor containing the agent filter on the SAP J2EE.
    I have configured the security provider (based on JAAS) as follows:
    EvaluateTicketModule
    AmSAPWASLoginModule
    CreateTicketLoginModule
    I have then increased the severity check of logging on the SAP J2EE Application Server for:
    com.sap.security.server.jaas
    com.sap.engine.services.security
    But since the installation of the agent, I am not able to see the logs of the different logon modules and be sure that the CreateLoginModule has been done.
    I need to check that after the success of the agent login module, it goes through the CreateTicketLoginModule, how can I check that.
    Thanks,
    Tanguy Mezzano
    amFilter log:
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: Notification Task Handler
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: Port Check Task Handler
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    PortCheckTaskHandler: request is on valid port
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: FQDN Task Handler
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    FQDNHelper: Incoming Server Name: [myserver] Result: null
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: Not Enforced List Task Handler
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    NotenforcedURIHelper.isNotEnforced(/myApp.jsp) found in enforced cache
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    NotenforcedURIHelper.isNotEnforced(/myApp.jsp) => false
    11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: SSO Task Handler
    11/13/2008 06:02:40:122 PM CET: SAPEngine_Application_Thread[impl:3]_35
    SSOTaskHandler: SSO Validation successful for id=myUser,ou=user,dc=myCompany,dc=com
    11/13/2008 06:02:40:122 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: URL Policy Task Handler
    11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
    URLPolicyTaskHandler: access allowed by AmWebPolicy
    11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: now processing: Redirect Check Result Handler
    11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
    RedirectCheckResultHandler: removing redirect counter cookie
    11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
    AmFilter: result =>
    FilterResult:
    Status : CONTINUE
    RedirectURL : null
    RequestHelper:
    null
    Data:
    null
    -----------------------------------------------------------

    I want to use my login page in BEA instead of Access Manager or Distributed Authentication Module. I think it is similar to the problem you have? Did you come up with a solution?
    My problem is described in more detail on this thread:
    http://forum.java.sun.com/thread.jspa?threadID=5197783

Maybe you are looking for