Urgent(Issue in RSA7 and SMQ1)

We have two data sources 0CRM_OPPT_H and 0CRM_OPPT_I are in RSA7 and
we deleted queues manually for these data source in SMQ1. Whenever we
dochanges to records related to these data sources that changes we can
able to see in RSA3 and Data base tables but there is no change in
number of records in RSA7 and no Queue created automatically in SMQ1.
We reinitialized the data source and scheduled it. We can able to
see records when we do Init scheduling and zero records for Delta
scheduling even after we did some changes in CRM side records. Delta is
not picking up in BI side and we are not able to see that changes in
RSA7 and also SMQ1 for these data sources in CRM side.
We are testing this issue in QA and DEV which are SP14 upgrade
systems. We tested in staging which is SP9 system; here I deleted
Queues related to these data sources (0CRM_OPPT_H and 0CRM_OPPT_I) in
SMQ1 and automatically the data sources deleted in RSA7. We
reinitialized the data source and scheduled it. We did some changes to
records related to these data sources and we can see the entries in
RSA7 and SMQ1.

Whenever you make a change in a Delta Datasource, after you reactivated and replicated in BW, the only way to reflect the changes in the queue is to reinitialize it.
If you're planning to reinitialize, it doesn't have any impact if you delete the specific queue in RSA7... However, it's always a good practice to have those queues emptied before making any changes so you don't leave behind records with errors. But that has to be done before the changes.
Hope it helps.
Regards,
Luis

Similar Messages

Transactions RSA7 and SMQ1

Can somebody please tell me what is the relation between SMQ1 , RSA7 and how this delta system works , are these transactions only for the LO extractions. I have already scanned SDN but am not clear , I am clear that all values entered by user will come in RSA7.

Hi......
Check SAP Note : 380078 'FAQ BW delta queue (RSA7) Questions and answers.........
What is the relationship between RSA7 and the qRFC monitor (Transaction SMQ1)?
The qRFC monitor basically displays the same data as RSA7. The internal queue name must be used for selection on the initial screen of the qRFC monitor. This is made up of the prefix 'BW, the client and the short name of the DataSource. For DataSources whose name is shorter than 20 characters, the short name corresponds to the name of the DataSource.
For DataSources whose name is longer than 19 characters (for delta-capable DataSources only possible as of PlugIn 2001.1) the short name is assigned in Table ROOSSHORTN.
In the qRFC monitor you cannot distinguish between repeatable and new LUWs. Moreover, the data of a LUW is displayed in an unstructured manner there."
Hope this helps......
Regards,
Debjani...........
Edited by: Debjani Mukherjee on Nov 13, 2008 7:33 AM
Edited by: Debjani Mukherjee on Nov 13, 2008 7:47 AM

Urgent Issue - Copy DTP and Process Chains in New Client Instance

We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.

Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar.

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

How to put check box in a table format at the out put ? Urgent issue...

Hi,
I am working an assignment to assign multiple roles for multiplr user.
In selection screen we have to enter mutiple EMPNO from ..to
1) in second screen we will get the empno, First name, last name, Position,
    From date, To date, Sap user ID, Email id in the table formate with first
    column with Check box.
2) In second screen below the table I have to place the multiple roles just like in
   the step loop format and below this one Execute button should be there.
If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design the second screen.
and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
Witing for kind response.
Thanks in advance.
Bansidhar

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Urgent Issue !!! Related to CJ20N

Hi Guys,
This is an Urgent Issue!!!!
I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
Now for the existing project and wbs element they want to update the values for the new custom fields .
So can anybody suggest me how to approach this problem as this is my first requirement in PS.
Points will be rewarded....
Awaiting for your reply..
Regards,
Ravi Ganji

You can use lsmw and do a recording to insert those new customer fields. LSMW can call bdc recording and you can enter the values there...

Urgent issue with Intrastat

Hi All, we have very urgent issue with intrastat report ''VE01''.
There is many documents with error Log-''The statistical value of the document item is zero.''.
The pricing settings looks OK and its impossible to
correct those documents with error.
Any Idee how I could correct them for them to get the green status?
Points will be added if helpful
Thanks and regards
Luis

Hello Luis,
please check the VBRP-BRTWR. If this fiels is zero then you get an entry in the incompletion log.
the message could be also occur if the GRWR is zero.
Please check your pricing setting.
Hope this will help to solve the problem.
I f you are satisfied with the answer, please don't forget to give Reward Points.
regards
Claudia

Urgent issue in user-exit

hi friends,
one urgent issue regarding user-exits;
i have the requirement like this:
if any one of these fields ZPBSTQTY2, ZPCSTQTY2, ZPBKTQTY2, ZPCKTQTY2 and ZPBFRQTY2 in table S505 is GT 0, then i need to pass a value 'X' to two flags present in that table.
then i have to update it thru transaction VA01.
Plz suggest some solution for this.
Thanks
Praveen

SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V45A0001 Determine alternative materials for product selection
And also you can write your code in MV45AFZZ
<b>Reward points</b>
Regards

Urgent ! BPEL file and ftp adapter problem.

Hi All!
I have created a bpel process having two partner links.One for the ftp adapter and one for the file adapter. I want the ftp adapter to poll the *.pdf files in the specified directory on the remote machine periodically and get them to my local machine here. For this I am using ftp adapter with read operation and with opaque schemas(because I want the files as they are without any transformation). I am using a receive activity with the ftp adapter, with the create instance box checked.
To write the file to the local machine I am using file adapter and write operation.File adapter also uses opaque schema.With this file adapter I am using invoke activity.Invoke is below the receive activity in the bpel process. I deployed this successfully on the default domain. I want the bpel process to run automatically,depending on the polling frequency given and create instances and bring the files to my machine.
But it is not happening.
Can anybody tell me where I am going wrong.How to accomplish this? It is very urgent issue for me.
Thanking in advance,
Regards,
Deepika.

Hi All!
Now I am able to write files and also read files successfully with the remote server. I followed the same method described above.I am using binary format itself for pdf files.But I have to check the option 'to delete files after successful retrieval' to make this happen.I created several partnerlinks with the option in the ftp adapter not checked,but it is not working. Has anybody done successful retrieval without deleting the files at the remote server? If so please let me know.
Thanking in advance,
Regards,
Deepika.
Message was edited by:
Deepika

Issue during drag and drop in vb

Hi Uwe,
I want an urgent help on the following scenario.
When i do a drag and drop anywhere on vb other than a link or spot.The screen freezes and when i try to do at lead selection on any of the FPM objects at the same time I get an assert condition violated dump.After my analysis I think its still possess the drop event when i try to do any other action on fpm at same time.This issue is happening for me in ie11 but for ie10 its working fine.
Please suggest some remedy!
Thanks
Siju

Hello Siju,
I am aware of multiple issues with drag and drop in the context of VB embedded in FPM/WD. In order to sort this out correctly and get the right solution I suggest to open a support ticket on BC-WD-CMP-FPM.
Best regards,
Uwe

Re: Related to CJ20N Urgent Issue

Hi Guys,
This is an Urgent Issue!!!!
I have a requirement to upload the data .Initially they have created project definition and wbselement with the help of some data transfer technique later on they have added custom fields to this transaction.
Now for the existing project and wbs element they want to update the values for the new custom fields .
So can anybody suggest me how to approach this problem as this is my first requirement in PS.
Points will be rewarded....
Awaiting for your reply..
Regards,
Ravi Ganji

Hello,
To update Customer fields in a WBS element you can use LSMW recording mode for Tx: CJ02
Enter the WBS element definition on the initial screen and cheese 'enter'
in the WBS element overview, choose first line and select from menu: ' Details -> <Customer Fields> (This is an exit and you may see a different text over here) and you see the customer fields. fill the values in the fields and save.
Hope this helps. Also please close all your previous threads.
Best Regards, Murugesh AS

Urgent issue, Suddenly no data is extracted Once I create new infopack

Hi,
I have an urgent issue and need help.
We were loading data after activating business content. Every thing worked fine and the delta load was also smooth.
However, in order to start everything afresh, I deleted all the info package, deleted the "Intialization option for the source system" AND then created my infopackage for Full upload with initialize option.
In this case the extractor didn't find any data. Please see the following log from the monitor "status " Tab.
"No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system."
This is not correct since we were loading data ( full and delta ) successfully before and there are data in the system. This is most probably to do with the delta queue initialization in the source system.
We were looading data from datassource 0CRM_SALES_ORDER_I.
Please help, we are really stuck.
Thanks
Arunava

hi Anurava,
take a look oss note 692195, i think authorization issue
Activities : 0CRM_SALES_ACT_1
oss 692195
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).

URGENT ISSUE: Line In Lag

URGENT ISSUE: Line In Lag? Hello everyone, for Christmas I got a brand new computer with Windows 7 and a Soundblaster X-Fi card. I got this new computer to record music.
I was horrified to find out that when I record guitar, vocals, or anything else through the Line in there is a MASSIVE lag that makes it IMPOSSIBLE to record! I have been looking for a fix for this for two months now. Some people with Realtek sound cards are saying there is a way to eliminate the lag with the Realtek control center program, others claim ASIO4ALL can eliminate the lag but I've had no?luck with that. I've tried tons of things to only find that the lag still persists
I AM NOT THE ONLY ONE WITH THIS PROBLEM! THERE ARE HUNDREDS OF MUSICIANS EXPERIENCING THIS! I am very desperate, recording music is what I li've for, and with Windows 7 I can't do that. I am begging Creative or someone to help me. Release a patch, anything..... Musicians worldwide are in an uproar, just do a google search on this topic to see how many people are experiencing this!
PLEASE HELP!!
Sorry for the caps, thanks for your time

?Hi -XM-,
Please don't?assume all kinds of lag issue to be the one and same problem. It's like saying every flu-like?symptom?is caused by the same?strain of virus. Which X-Fi card do you have exactly, the X-Fi Xtreme series or the?Titanium series?Are you doing a single track or multi-track recording? How massi've is the lag?
If your Soundblaster X-Fi card came preinstalled or distributed?along with your new computer, please contact the respecti've computer vendor for assistance. Sound cards distributed in this manner are usually OEM models specially customized by the vendor, therefore any support?requests?should be directed to them.
However if?the sound card was purchased separately in a Creative?retail box, please contact our Customer Support using this email form.

Urgent Issue:Err-REP-50125 : java.lang.ClassNotFoundException - 11.1.1.3.0

I'm trying to use custom destination with oracle fusion middleware 11.1.1.3.0 In-Process report server. I have added a custom destination section in the rwserver.conf file. Added the (customdest.jar - my jar file) jar file to the system classpath and reports_classpath. Still receiving class not found error.
Here are the details:
rwserver.conf:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<?xml version = '1.0' encoding = 'UTF-8'?>
<server xmlns="http://xmlns.oracle.com/reports/server" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="11.1.1.2.0" xsi:schemaLocation="http://xmlns.oracle.com/reports/server file:/opt/oracle/Middleware/as_1/reports/dtd/rwserverconf.xsd">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>


</cache>


*<engine class="oracle.reports.engine.EngineImpl" engLife="50" id="rwEng" maxEngine="1" minEngine="1" jvmOptions="-Xmx512M" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar">*
<property name="sourceDir" value="/opt/ogreports/catalog:/opt/ogreports/catalog/img"/>


</engine>
<engine class="oracle.reports.urlengine.URLEngineImpl" engLife="50" id="rwURLEng" maxEngine="1" minEngine="0" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar"/>
<security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/>

<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
*<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">*
*<property name="user" value="tomcat"/>*
*<property name="destype" value="rcpfile"/>*
*</destination>*
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
Error:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports/rwserver_diagnostic.log
[2011-09-29T10:52:26.871-04:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 46] [userId: <anonymous>] [ecid: 0000JApf0iF9XbpSoQjc4m1EOGV800001d,1:18769] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:-3e9d1a3b:1322b067681:-7fff-000000000000876f] REP-50125 : java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination [[
java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at oracle.reports.server.Destination.invokeShutdown(Destination.java:492)
at oracle.reports.server.Destination.shutdownDest(Destination.java:125)
at oracle.reports.server.RWServer.shutdown(RWServer.java:463)
at oracle.reports.server.RWServer.run(RWServer.java:364)
at java.lang.Thread.run(Thread.java:662)
ClassPath:.:/opt/oracle/Middleware/as_1/jlib:/opt/oracle/Middleware/as_1/reports/jlib
File in classpath: /opt/oracle/Middleware/as_1/reports/jlib
aolj.jar customdest.jar rwadmin.jar rwenv.jar rwxdo.jar
confmbean.jar runtimembean.jar rwbuilder.jar rwrun.jar
Relates to Oracle Bug:
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(viewingMode=1143&from=BOOKMARK&bmDocTitle=Can%20Not%20Find%20Class%20From%20Custom%20Destinations%20Jar%20File%20-%20REP-50125%20:%20java.lang.ClassNotFoundException&bmDocID=1263455.1&bmDocType=PROBLEM&bmDocDsrc=KB))
Note:
I'm not sure where the In-Process report server is looking for the classpath. I added them in all possible classpaths ans none of them worked.
This is an urgent issue in our team. We are migrating from 10g oracle application server to fusion middleware 11g report server. This functionality is working in 10g report server but not in 11g due to classpath issues.
Please let me know if additional info needed. Please respond.

Hi,
Thanks very much for responding. I added my jar file(customdest.jar) as you have suggested to setDomainEnv.sh. Now the In-Process report server just hangs when I try to bring it up through em and I don't see any errors in the log files. Any ideas where to look for errors? The jar files were created for 10g , we are just migrating them to 11g. I have setup the trace at highest level still don't see any error in rwserver_diagnostic.log.
Here is the details:
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/bin/setDomainEnv.sh :
if [ "${SERVER_NAME}" = "WLS_REPORTS" ] ; then
POST_CLASSPATH="/opt/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/oracle/Middleware/as_1/opmn/lib/nonj2eembeans.jar:/opt/oracle/Middleware/as_1/jdbc/lib/ojdbc6.jar:/opt/oracle/Middleware/as_1/opmn/lib/optic.jar:/opt/oracle/Middleware/as_1/opmn/lib/iasprovision.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/opt/oracle/Middleware/as_1/jlib/dfc.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-jclient.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-utils.jar:/opt/oracle/Middleware/oracle_common/jlib/ewt3.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.iau_11.1.1/fmw_audit.jar:/opt/oracle/Middleware/as_1/oui/jlib/http_client.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identitystore.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identityutils.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jaccprovider.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jacc-spi.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_codec.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_core.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazn.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazncore.jar:/opt/oracle/Middleware/oracle_common/jlib/jewt4.jar:/opt/oracle/Middleware/as_1/jlib/jta.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.ldap_11.1.1/ldapjclnt11.jar:/opt/oracle/Middleware/as_1/lib/mail.jar:/opt/oracle/Middleware/as_1/jlib/netcfg.jar:/opt/oracle/Middleware/as_1/jlib/oracle_ice.jar:/opt/oracle/Middleware/oracle_common/jlib/share.jar:/opt/oracle/Middleware/as_1/jlib/zrclient.jar:/opt/oracle/Middleware/as_1/reports/jlib/aolj.jar:/opt/oracle/Middleware/as_1/reports/jlib/confmbean.jar:/opt/oracle/Middleware/as_1/reports/jlib/runtimembean.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwadmin.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwbuilder.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwenv.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwrun.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwxdo.jar:/opt/oracle/Middleware/as_1/jlib/rts2.jar:*/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar*:${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
Log file: rwserver_diagnostic.log
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports
<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>


<connection idleTimeOut="15" maxConnect="50"/>
<queue maxQueueSize="1000"/>

<pluginParam name="mailServer" value="%MAILSERVER_NAME%">




</pluginParam>
</server>
[2011-10-02T23:31:51.431-04:00] [WLS_REPORTS] [TRACE:32] [REP-56025] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] RWServer:startServer Reports Server is starting up.
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [TRACE:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] ServerPacketHandler:start ServerPacketHandler started successfully
[2011-10-02T23:31:51.441-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] SecurityHelper:start Security system rwJaznSec successfully started.
No more error logged after this line. but in-process server just hung up indefinitely when I tried stating via the em and also via getserverinfo URL.
In rwserver.conf: I have defined the following for custom destination
/opt/oracle/Middleware/user_projects/domains/Repdomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>

Urgent(Issue in RSA7 and SMQ1)

Similar Messages

Maybe you are looking for