Urgent Issue with X230 Windows 8.1

I have upgraded my ThinkPad X230 to Windows 8.1.
I get the following two message every time I start
1. Power Manager Group: An error occurred while loading a resource DLL.
2. Problem starting C:\Program Files (X86)\Thinkpad Utilities\PVMTR64V.DLL. A Dynamic Link Library (DLL) utiliization routine failed.
I uninstalled Power Manager 3.06 but I still get the errors.
Please tell me how to either (a) get rid of the errors or (b) point me to a newer link to Desktop Power Manager to install.
This is quite urgent (error every single startup).
Thank you.
Solved!
Go to Solution.

Uninstall Power Manager
Go to C:\Program Files (x86)\ThinkPad\Utilities and rename PWMTR32V.DLL and PWMTR64V.DLL as _old files.
Get Glary Utilities or counterpart and remove PVMTR64V as a Startup Item.
Problem Gone.
However, Windows 8.1 delete Windows 8 Power Manager and there appears to be no way to get it back.

Similar Messages

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

Urgent issue with Intrastat

Hi All, we have very urgent issue with intrastat report ''VE01''.
There is many documents with error Log-''The statistical value of the document item is zero.''.
The pricing settings looks OK and its impossible to
correct those documents with error.
Any Idee how I could correct them for them to get the green status?
Points will be added if helpful
Thanks and regards
Luis

Hello Luis,
please check the VBRP-BRTWR. If this fiels is zero then you get an entry in the incompletion log.
the message could be also occur if the GRWR is zero.
Please check your pricing setting.
Hope this will help to solve the problem.
I f you are satisfied with the answer, please don't forget to give Reward Points.
regards
Claudia

Are there solutions to Compatibility Issues with Thunderbird, Windows 8.1 and Anti-Virus Software, e.g., MacAfee?

Since I upgraded to Windows 8.1, Thunderbird freezes up and goes into "Not Responding" mode repeatedly every few minutes. My research indicates that it is a problem with compatibility with antivirus software, which obviously is needed with an e-mail program. How can this problem be solved, or is there an antivirus program that works seamlessly with Thunderbird and Windows 8.1?

Personally I use ESET NOD32. It is not cheap, but it is unobtrusive and appears to get the job done. Originally I was drawn there for their server protection, but since I no longer have windows servers that need is gone, but I see no reason to change.
Previously over the years I have used;
* Norton (Found it just to much embedded into the operating system. Something went wrong with it and Windows would not boot.
* Microsoft Security Essentials. Any application using large data files was unworkably slow. That included Thunderbird.
* AVG It was just clunky and I did not like it.
But the big issue these days is the products are not just anti virus, they are suites including firewalls, password managers/vaults and often spam and scam tools. It is usually these later tools that cause the most issues with the firewalls blocking anything but known versions of known software and spam tools that mess up because it has not had enough testing.
Basically your on your own in selecting a product5. I can not recommend one. But I seriously question the need for mail scanning. Especially after that remarkable admission by Symantec regarding Norton's not scanning mail.
Thunderbird does not run any scripts in mail, nor does it do anything with attachments before you open them and then it decodes them and places them in the temp folder where any good anti virus will scan them.
Personally I suggest anti virus rather than security suite software. Especially so if you use Chrome or Firefox browsers and they both use Google lists of known malware and phishing site to block inadvertent visits.
Windows has a firewall, your modem (over 90%) has one as well, those firewalls block ports, protocols and route traffic. Do you also need one that blocks programs?
Mozilla products have a password manager, do you need another? And so the list goes on.

Text issue with Chinese Windows XP

Hello,
When installing a distribution made with the english version of CVI 2010 on a PC with Windows XP in Chinese I have an issue with some caracters like µA or ° (see below)
What could be the reason of this behavior and could I solve it?.

Hi Bertrand_ENAC,
Have you ever try to modfy the format and language settings in the setting panel on windows xp ?
Best Regards.
Aurélien Corbin
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Cahiers de vacances de NI
Présentations en ligne : 12 fondamentaux à réviser, du 9 juillet au 29 aoû...
Attachments:
language settings.png ‏27 KB

Issue with active window

Hello you, problem solver!
I have a little issue with active/inactive windows
For exemple when I use GIMP, this software is on 3 different windows... so my problem is:
when I'm on the image window drawing lines and I want to switch the pen..
I have to click on the tools window to active it then select the pen
And to go back on the image window and draw I have to click on the image window to active it then clic again to use the pen...
Is there a way to bypass the "Click to active the window" step?
Like click to draw, click to select a new tools and click back on the image window to draw...
Thanks for your help!

Welcome to the discussions.
This might be better answered at GIMP forums or FAQ as it looks like a UI issue with GIMP. Here is a link that you might want to visit. http://www.gimp.org/develop/
Also this is a good place http://gimp-brainstorm.blogspot.com/ where you can tell them your ideas.
Message was edited by: Meherally

WRT54G2 connection issues with a windows 2000 laptop, HELP!!! please?

Ok, at my house I have a newer version of a wireless router (I can't remember which). The old windows 2000 laptop that I have connects perfectly there, but when I installed a WRT54G2 router at my grandma's house it wouldn't connect to the router. My vista laptop and my grandma's vista desktop both are connecting to the router fine (as is evident in my typing this right now), but not the windows 2000.
It is registering that the signal exists, however, it says that it is out of range and it can't connect every time I try. Which makes no sense at all because the laptop in question is sitting no more than 4 ft away from the router.....
It's driving me insane! Does anyone have any suggestions on fixing this problem? Plus I'm not even sure if it's an issue with the computer or if it's an issue with the router itself......
Any ideas would be GREATLY appreciated!
Thanks,
illueia
P.S. sorry if I was too rambley...... or I wasn't clear enough....

Download and install the latest driver for your wireless card...
I aaume the security on the WRT54G2 wireless router must be WPA/WPA2 and that's the reason your Laptop(win2000) does not connect to it...
What error do you get when you attempt to connect to the Wireless Network ?
If it connects to your wireless network then what IP Address do you get for your Wireless Connection ?

URGENT: Issue with hierarchy level keys and report drill down

Hi,
BASIC STRUCTURE:
I have created a subject area with 3 facts (FACT_A, FACT_B, FACT_C) and 4 dimesnions (TIME_DIM,DIM_2,DIM_3,DIM_4). Each fact table also has additional aggregate tables aggregated along levels of the time dimension. Also our timw dimension has aggregated dimension tables like TIME_DIM_WEEK, TIME_DIM_MONTH, TIME_DIM_QUARTER and TIME_DIm_YEAR.
GOAL:
All 3 facts have the same measures M_1 and M_2 in them but may not have data for the same dimension values selected.
For example
For month JAN 2000 FACT_A.M1=100$ and no data exists for JAN 2000 in FACT_B and FACT_C. Then in the report
for JAN2000 it should show FACT_A.M1= $100, FACT_B.M1 = 0 and FACT_C.M1 =0. In this case I should be able to drill down to the lowest level.
ISSUE:
The time dimension TIME_DIM has the following levels - Total -> Year -> Quarter -> Month -> Week -> Day
However I am having an issue with drill down in the reports whenever I pull metrics from more than 1 fact at a time. I have defined the level keys but not sure if I need to do anything in addition since I am using aggregates.
I have to fix this issue quickly. Please help me.

Alastair,
All the fact tables have aggregated facts as sources.
I have checked the levels set for each of the sources to the time dimesnion table in BMM and they look okay. So the Time dim table in BMM has 4 source tables
Time_Day (level set to day, table key is "day"),
Time_month (level set to month, table key is "Fiscal_Month_Code"),
Time_Quarter(level set to quarter, table key is "Fiscal_Quarter_Code") and
Time_Year(level set to year, table key is :Fiscal_Year_Code").
Note: No time week aggregate added as logical source.
Again the time dim hierarchy based off of this table has levels: Total -> Year ->quarter -> Month -> week -> day
The levels keys set for each level are
Year -> Primary key is Year_Name (YYYY)(Checked as chronological key) and another key is Year_Num (YYYY)(Checked as chronological key)
Quarter->Primary Key is Quarter_Name (YYYY Qn), another key is Quarter_Number (Format n where n can assum values 1,2,3,4). Both keys are set as chronological keys
Month -> Primary key is Month_Name (MON YYYY), another key is Month_Num (Format n where n can assume values from 1 to 12) Both keys are set as chronological keys
Week -> Primary Key is week name (YYYY Wk nn, where nn can have values from 1 to 53), another key is week num (nn, where nn can have values from 1 to 53)
Day -> primary key set to day (date format)
Issue1: When I try to drill to lower levels it throws out an error saying report cannot find any data because filters may be too restrictive even though I see data at higher level
For ex: If I drill down to Year: 2010 and Qtr: 2010 Q2 and M1:$100 when I click on Qtr to drll to month level it throws me the error
Issue2: when I add year and qtr colums to the report I see data as below which is incorrect
Year_Name Qtr_Name data:FACTA_M1 Data: FactB_M1
2009 2009 Q1 $10 $5
2009 2009 Q2 $20 $80
2009 2009 Q3 $20
2009 2009 Q4 $30
2010 2010 Q1 $100
2010 Q2 $101
2010 Q3 $102 $230
2010 Q4 $103
2011 Q1 $10
In the above example year_name is not showing up for 2010 Q2 and after. However if I change the primary key for level 'Quarter' by having key consist of year name and quarter name instead of just quarter name the issue doesnt occur and drill down works great. The only issue is when I drill from qtr it first shows year name and quarter name instead of showing the next level which would be month name.
Sorry about the long message but I thought you might notice something in how I have set up the keys.
Thanks

Urgent : Issue with deleting Line Item in ME22N

Hi all,
I have an issue with deleting line item in ME22N for some Purchase Orders.
When I try to delete the line item, a warning message comes up saying that " Quantity invoiced or delivered is less than the quantity ordered". And I am unable to proceed further and save the PO. Could anyone let me know as why this is happening?
Thanks in advance.
Regards,
Adapala.

Hi
there is no need of group key.
if any of these 3 are done, payment will be done in total.
1.In setup all company codes for payment transactions , DESELECT seperate payment per business area check box
2.In setup paying company codes for payment transactions , DESELECT seperate payment for each reference check box.
3.In the Vendor Master got to payment transactions tab and below the payment method , there will be individual payment checkbox. DESELECT that check box.
try again with first two with DESELECT options , i will check out with DME.
Cheers

URGENT: issues with jump to targets

Hey Guys,
We have recently updated our BW system from 3.1c to 7.0. And now I am having problems with some of my queries. The major problem is for some of the queries I have jumps to other reports and when I try to execute these jumps I get an error saying "Variable I_CALDAY is incorrectly defined ". I have this issue with few queries all in one infoprovider.
Guys, Any help in regard will be highly appreciated.
Thanks and Regards,
Meher

Problem solved:
We had to check the box which says "ready for input". This solved the issue as of now.

VERY URGENT: Issue with Reconciliation against SAP Enterprise Portal

Hi,
We are using IDM7.0 and we have SAP Enterprise Portal as a resource. The users in portal are from Active Directory.
When I am doing full reconciliation against portal, it is processing only certain accounts. The reconcilaition policy is to link accounts. It is not linking teh accounts. Moreover, these accounts are not found in UNMATCHED accounts also. I don't have any account exclusion rules or something.
I wrote a small code snippet, which does just a single account reconciliation of a particular user id. In this case the portal account is being reconciled and linked properly.
Any ideas what the issue might be?
And I have another question too.. in the schema attributes of the out-of-box SAP Portal resource adapter, I don't see any ammping entry for "accountId". Usually for other resource adapters there would be entry for accountId (e.g in AD, mapping is: accountId <---> sAMAccountName). In case of portal, do we need to explicitly set this mapping? If so what would be the right hand side name in the schema? Does the right hand side name changes from one deployment to the other? If so how to determine what attribute maps to accountId in our portal? Might this lack of accountId is causing the issue with the reconciliation?
Any leads would be highly appreciated.
Thanks,
kIDMan.

Thanks for the reply. I have already set up correlation rule, account linking options for different situations like FOUND, UNASSIGNED, UNMATACHED etc. If my linking configurtaion is not correct then the fetched accounts should be atleast in the account index with situation as UNMATCHED. But that is not the case.
I am not sure if I made my problem difinition clear earlier. The problem I mentioned is not with "linking" of the accounts. The problem is IDM is detecting only some accounts. Among those set of accounts which IDM was able to fetch from portal during reconcilaition, it was able to successfully link the matching accounts to identities in IDM.
My question is, why IDM is fetching only certain accounts and not all accounts from portal resource.
As I mentioned earlier, when I run my code snippet to reconcile a single account, it reconciles successfully and links to user identity in IDM (if a matching idenity exists based on my correlation rule). But why the reconcilaition at the resource level is not able to fetch and reconcile teh same account.
Regarding the accountId attribute in the attribute schema, neither the SUN documentation nor the resource adapter configuration tells about the name of the attribute on the portal side that it should match to.
Thanks,
kIDMan.

Issues with installing windows on a new macbook pro retina.

Hello,
First time using bootcamp on my new macbook and I am running into an issue.
I have read the troubleshooting guide and everything else and no matter what I do I get the same problem.
The issue is that when bootcamp restarts after partitioning my drive, windows loads and I start the install process. Its says set up is starting and then it says that a required cd/dvd drive device driver is missing. I only have one usb drive connected (the one with windows on it) and nothing else. This is getting incredibly frustrating haha.
info on the macbook.
brand new (purchased yesterday) macbook pro 15 retina. 512ssd gtx 650. 12 gb of ram
I really need windows on my pc before monday so all help is appreciated.

External USB DVDs use to be an issue that req'd editing plist to allow booting from one.
I have lost track of the issues and fixes but for burning ISO:
SimplyBurns is a Mac OS X application with a GUI, which allows the user to burn CD / DVD media.
Features:
Emphasis on ease of use
Audio CD project, Data project (Filesystems: ISO9660, Joliet, HFS+, UDF) and Burn image mode
Erasing rewritable media
Persistence
http://simplyburns.en.softonic.com/mac
Here's instructions on burning an ISO with Disk Utility:
http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc
And this thread on burning a Windows DVD in OSX:
https://discussions.apple.com/thread/2039118?start=0&tstart=0
(Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
Windows 7 USB/DVD Download Tool Windows can be used with any VM
The Windows 7 USB/DVD Download tool allows you to create a copy of your Windows 7 ISO file on a USB flash drive or a DVD. To create a bootable DVD or USB flash drive, download the ISO file and then run the Windows 7 USB/DVD Download tool. Once this is done, you can install Windows 7 directly from the USB flash drive or DVD.
http://wudt.codeplex.com/
Install Windows 7 From USB Drive
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesn’t work, try out the Microsoft’s official tool called Windows 7 USB/DVD Tool.
Note that resulting USB drives from UNetbootin are bootable only on PCs (not on Macs).
http://unetbootin.sourceforge.net/
http://www.addictivetips.com/windows-tips/install-windows-7-from-usb-drive-requi res-2-simple-steps/

Urgent :- Issue with deploying application in Oracle Application server

Hello All,
Hope all of you are doing good ! I am facing an issue relating to deploying applications using the Enterprise manager. When i deploy the war file using Deploy WAR file option in the OEM, i get the following error -
Failed to deploy web application "gCube". Failed to deploy web application "gCube". . The configuration files for this OracleAS 10G instance are inconsistent with the
configuration stored in the repository. In order to protect the repository,
no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
{0}
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Root Cause: invalid stream header
Resolution: . invalid stream header
Please could you throw some light on this issue and also provide a resolution to fix this issue at the earliest ?
Your help in this , will be greatly appreciated.
Thanks and Regards,
Ramanan.

Hello All,
Could anyone assist me with a fix for the problem ?
Would appreciate it greatly.
Thanks.

Support issue with X230 problem charing and power button stuck.

My X239 is not charing to the full 100%, I have two other Thinkpad models that my parents and they all change to 100%.. This is newer than theirs. Also the power button on the laptop is not flexing enough, you wont fee if you are pressing it. I send this for repair twice and its not fixed yet.I wonder the support tech read the whole desciption of the trouble or just goes by the category of the trouble. I like to talk to someone to make sence but its all automated. I am so much dissatisfied with their service and the product itself.

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that battery of your Lenovo ThinkPad X230 is not charging to 100% and the power button is stuck.
I would suggest you to follow the below troubleshooting steps.
Shutdown, unplug AC and remove battery. Press and hold power button for several seconds. Then re-install battery and AC and restart and see.
Download latest Power Manager and Power Management driver.
Uninstall Power Manager and Power Management driver that is already installed.
Reboot the laptop
Install Power Manager and Power Management driver
Reboot laptop again and see if helps.
Go to Power manager -> Battery tab in advanced view -> Battery maintenance -> Select always fully charge ->Ok and restart the system.
Ensure that the system is plugged-in and that battery firmware is up-to-date. Check the Lenovo support site for any battery firmware updates for your particular model. Perform battery gauge reset. This will allow the battery to relearn available capacity. Update BIOS to the latest level.
Regarding the power button, you may have to disassemble the system and reseat the button. Refer hardware maintenance manual to perform disassembly of the system. Otherwise, you may have to report the issue to Lenovo technical support again. Sorry for the inconvenience.
Please post back with the results!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

[BSPWM] Issues with my windows being the wrong shape for my monitor.

I wasn't sure what to name this, but I guess that doesn't matter.
Simple backstory: I'm running arch on my laptop. I used to run a dual monitor setup (my laptop's screen and an external monitor); however, as of a little while ago, the laptop's screen broke, leaving me to use the external monitor only.
The issue is that, in bspwm, the windows that are made are for the size and shape of the laptop's monitor... not the external monitor.
(As you can see here.[That is just a screenshot of what happens when I press the shortcut to pull up my terminal])
To set the external monitor as the monitor shown and used I use xrandr with this in my xinitrc:
xrandr --output HDMI1 --off --output LVDS1 --off --output DP2 --off --output DP1 --off --output --primary VGA1 --mode 1280x1024 --pos 0x0 --rotate normal &
If there is anything else you need to know, tell me... I'm not exactly sure what the issue is here, but I'm really hoping someone here does.

This:
bspc config remove_disabled_monitor true
might help.

Urgent Issue with X230 Windows 8.1

Similar Messages

Maybe you are looking for