URGENT: Multiple line items in delivery document created for a STO

Hi Gurus,
We ar ecreating deliveries using VL10b for a STO. Teh TSO has 40 - 50 line items. But the delivery is created with one line item only an dit creates a delivery for each line item. How cna we allow the inclusion of multiple line items in delivery?
We are using delivery type NL an ditem categor is NLN.
Geratly appreciate any help in that.
Thanks,
KHAN

Hi Gianpaolo,
Thanks for your suggestion I have 5 shedule line itmes for one material and two shedule line for another material and when i changed the material by selecting one line for each sales document no and creates the delivery it is howing three line itmes for the 1st material and line items for the second and quantities equal to the changed quantity in VL02N. and I have value "1" in field "Split per sched.line" in "user role" view of VL10E.
Kindly help.
Thanks and Regards
Tanweer

Similar Messages

  • Addition of new line line items in delivery while creating

    HI All,
    i have the requirement of adding a new line item in delivery items while creating it referencing a sales order.
    i have to add new line item based on the existing line items. i have done coding in badi save_doc_prepare.
    now new line items are getting added  but we are not getting values in all the fields which are determined by SAP.
    because after badi save_doc_prepare sap does not determine the values for newly added fields.
    can anybody suggest some good solution.
    thanks
    Rajpal Sehrawat

    try this BAPI BAPI_PO_CREATE

  • How to enter line item in delivery document?

    Dear All
    I am confused is there any standard in SAP SD that we can enter one line item directly in delivery document?
    I have a scenario for which i want to do this.
    I am using material type DIEN and item category TAX for freigh billing. We want to create freight posting using dummy non valuated material DIEN. We will directly enter this material 9999 in delivery order.
    I am doing this but system gives me error. I have assigned in T-Code 0184 delivery type LF item category group DIEN Item category for the higher level item TAN item category TAX. When i enter material 9999 in delivery document system gives me this error
    *No item category exists (Table T184L LF DIEN  )
    Message no. VL320
    Diagnosis
    There is no item category available in item category determination in the delivery (table T184L) for the following entries: LF DIEN
    System Response
    The system does not allow further processing of this item.
    Procedure
    Specify the appropriate item category for the above mentioned entries or inform your system administrator.*
    please suggest how to do this. Or if you have any better solution please suggest that. our requirement is that we want to post freight expense directly in freight expense GL and transporter GL. WE are not using transportation module instead we are using simple Sale order > Delivery order > Billing document process. Billing is created from delivery document.

    Item category determination is working fine. Now i am getting this error while creating billing document with reference to delivery document.
    6000054192 000020 Please check Customizing for cross-company
    Diagnosis
    The system checks whether this is a cross-company
    situation, which means that it checks whether two different
    company codes exist and whether billing status has been set
    to intercompany billing.
    Procedure
        Check in Customizing under Sales and Distribution->
        Billing-> Intercompany billing to make sure all necessary
        settings have been made.
    But actually this is not cross company transaction. Please help me in this regard

  • URGENT: Delivery with multiple line items for a STO

    Hi Gurus,
    We ar ecreating deliveries using VL10b for a STO. Teh TSO has 40 - 50 line items. But the delivery is created with one line item only an dit creates a delivery for each line item. How cna we allow the inclusion of multiple line items in delivery?
    We are using delivery type NL an ditem categor is NLN.
    Geratly appreciate any help in that.
    Thanks,
    KHAN

    The problem you face is called 'Delivery split'.
    For the STO scenario, one common cause is different delivery dates (in the past) in the STO line items. If so, then you should refer to SAP Note 377501 (from where I quote below):
    You can implement the source code specified in the correction instructions in copy routine 301 (or a copy of this routine in the customer namespace). This correction ensures that when you transfer data form the preceding document, backlogged delivery dates or goods issue dates are set to the current date. This prevents the system form performing a delivery split.
    Then a rescheduling of the delivery occurs. Since forward scheduling occurs for backlogged delivery items (that is, the picking date or the transportation planning date is set to the current date), the manipulation of the delivery date or goods issue date in the copy routine does not affect the result of the scheduling.
    If the dates are not the problem, then this Note refers to other Notes which deal with this problem, and should definitely solve your problem.
    Regards
    Nikhilesh

  • What is the direct link between Schedule Line item and Delivery line item?

    Hi SAP SD Gurus,
    The question is simple.  I would like to calculate the Open order quantity for a particular month based on the Schedule Line Date.
    I am taking all the Schedule lines falling below the running date of the month and sum up that and look for the deliveries happened for that Schedule lines.
    I am unable to link that Schedule line with that Delivery line item.
    The only link is Schedule Line Number in VBEP table which is not available in LIPS.  I would like sum up the Schdule line Quantities and Subtract the sum of the Delivery quantities which will give me the Open orders for the particular day of the month.
    Can anyone help me to link this VBEP table to LIPS table to connect the Schedule line number with the Delivery line item?
    Thanks in advance for your help..
    Augustine

    Anuj,
    I am aware of the Functional Modules. 
    I wanted to know for this Schedule Line, this is Delivery document created.
    Where in SAP through Tables it is linked?  Because, I need to source the Tables to calulate the open orders by way of external report through Business Object.
    The table link from VBEP to LIPS is not directly linked.  It is linked from Sales order line item level.  Because we are capturing all the Sales order Line tiems through the Delivery Status which is not equalled to C. But if there are partial deliveries against the Scheuld Line item level, we need to identify.  The only common joint should be Scheldule line number which is not available in LIPS.
    If we are developing report inside SAP, we can use the said Functional Modules to capture through Structures VBEPD.  Since it is a external reporting , we need to give correct tables and the joints.  Hence I am looking for any other way to solve this.
    Thanks
    Augustine Ponraj

  • Pls help me to create SO using BDC for multiple line items (VA01)

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    Pls help me this is urgent requirement.
    [email protected]
    Thanks & Regards,
    J.Lokesh

    If u want to add Items data, u have to handle the Table control by writing the complete code.
    U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
    Narendra

  • BDC to create SO(VA01) for multiple line items

    Hi all,
    My requirement is to create SO for multiple line items in ECC6.0
    My recording for VA01 is like this.
    start-of-selection.
    perform open_group.
    perform bdc_dynpro      using 'SAPMV45A' '0101'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAK-AUART'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBAK-AUART'
                                  'ZOR'.
    perform bdc_field       using 'VBAK-VKORG'
                                  '2000'.
    perform bdc_field       using 'VBAK-VTWEG'
                                  '10'.
    perform bdc_field       using 'VBAK-SPART'
                                  '05'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(01)'.
    perform bdc_field       using 'RV45A-MABNR(01)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(01)'
                                  '    10'.
    perform bdc_field       using 'RV45A-KWMENG(01)'
                                  '                 55'.
    perform bdc_field       using 'VBAP-WERKS(01)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.2'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1200'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '26.4'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-WERKS(02)'.
    perform bdc_field       using 'RV45A-MABNR(02)'
                                  'hrpocf'.
    perform bdc_field       using 'VBAP-POSNR(02)'
                                  '    11'.
    perform bdc_field       using 'RV45A-KWMENG(02)'
                                  '                 66'.
    perform bdc_field       using 'VBAP-WERKS(02)'
                                  '2010'.
    perform bdc_dynpro      using 'SAPLCEI0' '0109'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RCTMS-MWERT(06)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'RCTMS-MNAME(01)'
                                  'A_THICK_MM'.
    perform bdc_field       using 'RCTMS-MNAME(02)'
                                  'A_WIDTH_MM'.
    perform bdc_field       using 'RCTMS-MNAME(03)'
                                  'A_EQUIVALENT_SPEC'.
    perform bdc_field       using 'RCTMS-MNAME(04)'
                                  'A_BATCH_WEIGHT_MAX_SI'.
    perform bdc_field       using 'RCTMS-MNAME(05)'
                                  'A_BATCH_WEIGHT_MIN_SI'.
    perform bdc_field       using 'RCTMS-MNAME(06)'
                                  'A_COIL_INNER_DIA_MM'.
    perform bdc_field       using 'RCTMS-MWERT(01)'
                                  '3.1'.
    perform bdc_field       using 'RCTMS-MWERT(02)'
                                  '1250'.
    perform bdc_field       using 'RCTMS-MWERT(03)'
                                  'IS_11513_GR_D_1985'.
    perform bdc_field       using 'RCTMS-MWERT(04)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(05)'
                                  '20.084'.
    perform bdc_field       using 'RCTMS-MWERT(06)'
                                  '610'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(01)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'FDGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=PDE3'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSNR(02)'.
    perform bdc_field       using 'RV45A-VBAP_SELKZ(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-TAXM1'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM2'
                                  '1'.
    perform bdc_field       using 'VBAP-TAXM3'
                                  '0'.
    perform bdc_field       using 'VBAP-TAXM4'
                                  '0'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'GFGFDG'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\10'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-POSEX_E'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '000005'.
    perform bdc_dynpro      using 'SAPMV45A' '4003'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBAP-POSEX'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAP-POSEX'
                                  '108128'.
    perform bdc_field       using 'VBKD-BSTKD_E'
                                  '3011192'.
    perform bdc_field       using 'VBKD-POSEX_E'
                                  '5'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KKAU'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai east'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\02'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-KONDA'.
    perform bdc_field       using 'VBAK-AUDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-VKBUR'
                                  'IN15'.
    perform bdc_field       using 'VBAK-WAERK'
                                  'INR'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-KDGRP'
                                  'CF'.
    perform bdc_field       using 'VBKD-PLTYP'
                                  '01'.
    perform bdc_field       using 'VBKD-KONDA'
                                  '01'.
    perform bdc_field       using 'VBKD-BZIRK'
                                  'NORTH'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\03'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-VSART'.
    perform bdc_field       using 'VBAK-VSBED'
                                  '01'.
    perform bdc_field       using 'VBKD-KZAZU'
                                  'X'.
    perform bdc_field       using 'VBKD-VSART'
                                  'ER'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\05'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-INCO2'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'VBKD-FKDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBAK-TAXK1'
                                  '1'.
    perform bdc_field       using 'VBAK-TAXK3'
                                  'l'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\09'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'VBKD-ZLSCH'.
    perform bdc_field       using 'VBKD-KTGRD'
                                  '01'.
    perform bdc_field       using 'VBKD-ZLSCH'
                                  'c'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DELETE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_CREATE'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TP_DETAIL'.
    perform bdc_field       using 'LV70T-SPRAS'
                                  'EN'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXVB'.
    perform bdc_field       using 'RSTXT-TXLINE(02)'
                                  'BDFBFDB'.
    perform bdc_dynpro      using 'SAPLSTXX' '1100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RSTXT-TXLINE(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=TXBA'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\11'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=KSTC'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(02)'.
    perform bdc_field       using 'J_STMAINT-ANWS(01)'
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(03)'.
    perform bdc_field       using 'J_STMAINT-ANWS(02)'
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'J_STMAINT-ANWS(04)'.
    perform bdc_field       using 'J_STMAINT-ANWS(03)'
    perform bdc_field       using 'J_STMAINT-ANWS(04)'
                                  'X'.
    perform bdc_dynpro      using 'SAPLBSVA' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'JOSTD-OBJNR'.
    perform bdc_dynpro      using 'SAPMV45A' '4002'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/EBACK'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-TXT_VBELN'.
    perform bdc_dynpro      using 'SAPMV45A' '4001'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SICH'.
    perform bdc_field       using 'VBKD-BSTKD'
                                  'open SO'.
    perform bdc_field       using 'VBKD-BSTDK'
                                  '29.01.2008'.
    perform bdc_field       using 'KUAGV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'KUWEV-KUNNR'
                                  '100000'.
    perform bdc_field       using 'RV45A-KETDAT'
                                  '29.01.2008'.
    perform bdc_field       using 'RV45A-KPRGBZ'
                                  'D'.
    perform bdc_field       using 'VBKD-PRSDT'
                                  '29.01.2008'.
    perform bdc_field       using 'VBKD-INCO1'
                                  'EXW'.
    perform bdc_field       using 'VBKD-INCO2'
                                  'mumbai'.
    perform bdc_field       using 'VBKD-ZTERM'
                                  '0001'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RV45A-MABNR(01)'.
    perform bdc_transaction using 'VA01'.
    perform close_group.
    if in excel file one row of records means i am succesfully creating SO.
    But for multiple i am not getting idea to create SO.
    My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
    VBAK-AUART    :Order Type
    VBAK-VKORG    : Sales Org
    VBAK-VTWEG    : Distri Channel
    VBAK-SPART    : Division
    VBAK-KUNNR    : Sold-to-Party
    VBPA-KUNNAR   : Ship-to-Party
    VBAK-BSTNK    : PO No
    VBAK-BSTDK    : PO Date
    VBAP-MATNR    : Material No
    A_THICK_MM
    A_WIDTH_MM
    A_EQUIVALENT_SPEC
    A_COIL_INNER_DIA_MM
    A_BATCH_WEIGHT_MIN_SI
    A_BATCH_WEIGHT_MAX_SI
    VBAP-KWMENG    : Qty
    VBAP-WERKS     : Delivery Plant
    VBKD-INCO2     : Incoterm2
    VBKD-KONDA     : Price Group
    VBKD-VSART     : Shipping Type
    VBAK-TAXK1     : Cust Tax-1
    VBAK-TAXK2     : Cust Tax-2
    VBAK-TAXK3     : Cust Tax-3
    VBAK-TAXK4     : Cust Tax-4
    VBKD-ZLSCH     : Payment Method
    VBAP-TAXM1     : Mat tax clss-1
    VBAP-TAXM2     : Mat tax clss-2
    VBAP-TAXM3     : Mat tax clss-3
    VBAP-TAXM4     : Mat tax clss-4
    VBAP-POSEX     : IMPS Order No
    VBKD-BSTKD_E   : old SO in 4.6c
    VBKD-POSEX_E   : old SO Item  in 4.6c
    Text Id        : TDC No
    Text Id-ES10   : Special Inst(Unld const & Veh)
    ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
    51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192,     1,PO 444 AMD 1,Spl Inst
    based on VBKD-BSTKD_E line items has to create.
    if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
    if it is changed to 3011193 then only different SO.
    PLs If any one knows solution pls write some sample code for me.
    If u send that code to my mail id also  very thankful.
    [email protected]
    Pls help me this is urgent requirement.
    Thanks & Regards,
    J.Lokesh

    HI,
    Instead of using BDC , why dont you make use of BAPI.
    As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
    Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
    *--Logic something like this.
      loop at it_exceldata into l_line.
      loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
      *This will loop at all the same  PO#
      *collect the data related into corr tables. and append
      endloop.
      *Now you are outside the loop.
      *Call the BAPI to update this SO
      delete it_exceldata where bstkd_e eq l_line-bstkd_e.
      endloop.
    Also pass all the necessary data to header structure ORDER_HEADER_IN
    Do not check for Sy-subrc at the end of execution.
    Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
    Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
    Please let me know , if you need more help in this
    Gary.

  • Printing of return delivery of multiple line items

    Dear All,
    I have a requirment to print return delivery material document with multiple line items of a PO. I tried with collectve slip in MIGO. but still line item will come in different pages. Message details are maintained for all line items. Print preview is seen from MB90.  please suggest me to achieve this requirement.
    Regards
    MSR

    Hi MSR,
    Contact ur ABAPer and ask him to adjust the Sapscript Form / SMART Form.
    Regards
    Ramesh Ch

  • Line item gets duplicated while creating billing document

    Hello,
    I have created an order with two billing plans (periodic & milestone) having single line item. When I create a billing document, line item gets duplicated.
    Can any one help me...
    Regards,
    Kishore

    Hello Balu,
    Kindly see the process below.
    Quotation -> Sales Oder -> Delivery -> Invoice (proforma) -> Excise invoice
    In the above mentioned process, I create quotation for 2 material for quantity 2 each say. I create SO with ref to quotation for only one material with quantity 2. Since I have to do proforma invoice & then the excise invoice, so I have created two billing plans. I have attached both the billing plans to SO. Now after completion of delivery, when I go for doing proforma invoice, I can see duplilcation of material (material in SO gets duplicated in Billing). When I go back to SO and remove one Billing Plan, then material is not duplicated in billing (proforma invoice). But as client said they want two billing plans to be attached to SO. So issue is with Billing Plan which creates duplication.
    I hope this clear's the issue to you...
    Can you suggest any way out....
    Regards,
    Kishore

  • How to Restrict Single Delivery Date for PO with Multiple Line Items

    Dear Experts,
    How to Restrict Single Delivery Date for PO with Multiple Line Items.
    System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
    Can we achive this by Some Enhancement in SAP or Not ???
    If so how to do it.
    Any Inputs is highly appreciated.
    Thanks and Regards,
    Selvakumar. M

    Hi Selvakumar,
    we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
    You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
    (for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
    Regards,
    Madhu.

  • Creating a PO Using BAPI For Multiple PLants Or Multiple Line Items

    Hi All
        Can you please suggest me how to create a Purchase Order Using BAPI_PO_Create1 for Multiple Plants Or for Multiple Line items. The Requirement is like the PO is for single material for single vendor but for mulple stores i.e plants
    NOte:  Suggest me the  Creation of PO for MUltiple Line items or for multiple plants Using BAPI . Hope you people will give me the needful.
    Regards
    Shivakumar Bandari

    Hi,
    Here is the sample code to do that...
    *---> po header data
      wa_poheader-vendor    =  your vendor..
      wa_poheader-doc_type  =  Your doc type..check with Functional contact....
      wa_poheader-purch_org =  Purchasing Org..
      wa_poheader-pur_group =  Purchasing Group
    *---> po header data (change toolbar)
      wa_poheaderx-vendor    =  'X'.
      wa_poheaderx-doc_type  =  'X'.
      wa_poheaderx-purch_org =  'X'.
      wa_poheaderx-pur_group =  'X'.
    *---> poitem data
    data: item like ekpo-ebelp.
    item = '0010'.
    loop at t_parts.
      it_poitem-po_item  =  '00010'.
      IT_POITEM-PLANT    =  Plant..
      IT_POITEM-STGE_LOC =  Sloc...
    *---> poitemx (item data change toolbar)
      it_poitemx-po_item  =  '0010'.
      it_poitemx-po_itemx  =  'X'.
      IT_POITEMX-PLANT    =  'X'.
      IT_POITEMX-STGE_LOC =  'X'.
    *---> add record's to internal table
      APPEND:  it_poitem,
             it_poitemx.
    endloop.
    *call bapi_po_create1
      CLEAR v_ebeln.
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = wa_poheader
          poheaderx        = wa_poheaderx
        IMPORTING
          exppurchaseorder = v_ebeln
        TABLES
          return           = it_return
          poitem           = it_poitem
          poitemx          = it_poitemx.
    *---> check the return table for error message
      READ TABLE it_return WITH KEY type = 'E'.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      endif.
    Thanks,
    Murali

  • Different delivery address in multiple line items of SC

    Hi All,
    Requirement: If we have different delivery address in multiple line items of SC, the first line item delivery address should be replaced by other line items.
    I would like to know the relation between first line item in the shopping cart and its correspnding delivery address?
    I have compared the guid of first line item (BBP_PD) and guid of shipping address (second guid not partner guid) which were not same.
    Any alternatives we have.
    Thanks and Regards,
    /N

    Hi Naveen,
    I guess you would like to change the delivery adress in the BBP_DOC_CHANGE_BADI.
    Here you can identify the delivery adress (partner function 00000027) line item by the field P_GUID. This P_GUID in the partner table (ET_PARTNER-P_GUID) consists the GUID of the SC line item (ET_ITEM-GUID).
    When you know the line item GUID, you can find the SC line item number in the item table (ET_ITEM-NUMBER_INT) and you can see which is the first, second... line item of the SC.
    Regards,
    Peter

  • Multiple line item in billing but only one line item in accounting document

    Hi Everyone,
    I am having one scenario in which sales order has more than one line item. Only one billing document is create for all line items in Sales Order but billing document contains as many items as sales order has. In accounting document of billing i find only one customer line which has total amount of all line items in billing as debited. My requirement is Accounting document also should have as many line of customer-debit as in billing items i.e sales order. For example :
    (1) Sales order has 2 line items.
    (2) Billing document is only ONE and has 2 line items
    (3) currently accounting document has only ONE line of Customet - Debit ( Total amount of both items)
    My requirement is
    Accounting document should have 2 line item of customer - Debit
    Customer - Debit (amount of first line item)
    Customer - Debit (amount of Second line item)
    Sales - Credit
    How can it be done ?
    Regards,
    Manish

    Hi,
    This is the SAP expected behaviour
    As far as the values correspond to same account key and same GL account as per account determination, then ti will be posted as a single line item in FI document.
    If you want the customer specific items to be posted in two GL accounts , then you have to do the account determination that way.
    For example, you should have a condition table in FICO as follows.
    Sales org/ Account key / Customer
    For this condition table, the entries shoudl be as follows.
    5110/ERS/Customer A  GL ACCOUNT IS 5000100
    5110/ERS/Customer B GL ACCOUNT IS  5000200
    In this case, there will be 2 entries for the invoice instead of just one line entry.

  • Create ecatt script for one sales order creation with multiple line items

    Hi ,
    I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
    This selection of data will be from an external file/ variants which will have only one row of data in it.
    Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
    Second: I have to create sales order for those many line items having same PO Number.
    Best Regard
    Taranum

    Hi Micky
    Firstl you should upload the Line items for a particular sales Order in an Internal table
    and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
    In case of any issues pls revert back
    Reward points if helpful
    Regards
    Hitesh

  • Unable to create PO with multiple line items through LSMW-BAPI method

    Hi All,
    I have a requirement of creating PO through LSMW. I can't use LSMW standard batch input program since there are some fileds not available and also it has many limitations. I'm using LSMW-BAPI method ( Business object BUS2012) which create IDOC and uses BAPI_PO_CREATE1 to ultimately post the PO in the system. I am trying to create PO from a single file which contains both Header and Item data.
    Now my problem is that everytime PO is being created with Single line item only. Everytime I am giving multiple item data in the source file LSMW is preparing multiple IDOCs for multiple line items. As per my understanding this is happenng since header and item is in the same hierarchy level of IDOC type PORDCR102 and the control record is inserted for every line item in the source file.
    It seems that through LSMW-BAPI  it is not possible to create PO with multiple line items. Can anybody provide some input regarding this? Thanks in advance.
    BR,
    Atanu Mukherjee

    Solved by myself.
    Earlier the problem was that LSMW was not being able to recognize items under same header. It was creating new IDOCs every time it gets a new item. To enable this we need to create two structure HEADERDATA and ITEMDATA.  Two additional identifier fields with identifier value 'H' and 'I' should be added in these two structures respectively. Then we need one sequential file with the identifiers field followed by the header and Item data. Example:
    H~header data
    I~item data
    I~item data 
    This would help the standard program to understand what are the items under same header and ultimately create PO with multiple line items.
    BR,
    Atanu Mukherjee

Maybe you are looking for

  • TREX/Content Server: Full text searches not working

    I've setup TREX and Content Server in a sandbox environment and have been trying to get my head around DMS.  I've completed what I've believed are the required steps (outlined below) and I have submitted 12 documents of various types into the resposi

  • I have Downthemall installed but it does not appear on the Tools dropdown menu. How do I fix this?

    Other add-ons, like BetterPrivacy, have been installed and enabled, but do not appear in the Tools drop-down menu either. Uninstalling and reinstalling does not help. I am using version 3.6.13 of Firefox.

  • Error establishing socket to host and port: EPM11:1433

    Hi Planning Experts, I am trying to configure EPM 11.1.2.1 (Planning) RDBMS: SQL server 2005 (Express Edition) OS: 2008 R2 x64 i am getting error after providing RDBMS credentials "error establishing socket to host and port: EPM11:1433 Reson: connect

  • Solaris Coolstack 1.3.1 Innodb engine not working

    Last night I spent about 7 hours at my collocation facility setting up the server. It says that the coolstack 1.3.1. package comes with Innodb, I do even have the innodb skip command in the my.cnf file. I for the life of me can't figure out why it wo

  • Conflict between oracle 8 and oracle 11

    Hi, I'm having a problem installing oracle 8 and oracle 11 homes at the same time. It looks like the system can only recognize one of the homes. I have 2 different applications running in the same computer. One of them uses oracle 11 and the other or