Urgent - - opening iviews in whole one page.

hi
Here is my problem .
We have 5 iviews in one page . when u click on one iview it should be maximised and open in whole page no other iviews can be seen in the page . I.e Other iviews should hide, those shouldn't be shown in the page .
Anyone knows abt this how to do .
Pls reply this .
Thanks
shashank
Urs answers must be appreciate.

Hi Shashank,
first, it was Dagfinn who suggested the workaround using the code given, maybe you should ask him <i>where</i> to exploit this modification...
Anyhow, whatever I or Dagfinn will suggest concerning this, it will be a really heavy modification. Even if I'm known as a guy who is not very frightened of modifications, in this case, I would absolutely disadvise of going this way. It will be really much work to get it round, and it's a modification in the center of the given functionality (not in one small part, where problems on a productive system only occur in such a small part, too).
You would have to catch the code fragments where for example the iView trays are built (I once saw them, it's not very handy!). There you could add two options - "Maximise" or "Minimise" (depending on the state). Maximise would mean to fill the content area with the actual iView (here you could take Dagfinn's code as a starting point), Minimise would mean to rebuild the content area with the original navigation target (and so with the whole page and it's iViews).
Hope it helps
Detlev
PS: Please consider rewarding points for helpful people and answers...

Similar Messages

  • Why does firefox open up more then one page when I login

    After upgrading to Firefox 5, when I open Firefox it opens about 15 to 20 pages and I have to close the pages before it will let me continue. Why is this happening?

    But there aren't any symbols. It's just set to http://www.yahoo.com
    And every time I open Firefox, it opens with 3 Tabs, one of which IS Yahoo but the other 2 a regarding plug ins being successfully updated. I've even gone as far as to uninstall those plug ins and it still opens with 3. About ready to uninstall Firefox and stay with IE

  • "Go Back One Page" doesn't work on first page visited from Home Page

    When opening FF4.0, my homepage opens fine. Whether I manually type a webpage address, use a book mark from list or button bar, once that page opens, the "Go Back One Page" button is still gray and the only way to get back home is to click the "Home" button.
    I tried restarting program and it did not correct anything. I next tried restarting computer and that did not do anything either.
    My system: Core2Quad Q8400 with 8G RAM. BIOS is up to date, as well as all drivers for all hardware.

    Hi,
    Thanks for your reply, but unfortunately browser cache wasn't the problem. I use Firefox(default), IE and Opera for testing and I close the browser most of the times after I deploy the project. Even tough if I don't close the browser I hit the ctrl+f5 several times to avoid the cache problems. I tryed setting the browser to check newer versions every time I open the page, but that didn't help either.
    Like I said the problem occurs in our public deployment server too with everybody who enters the page first time in each session. After login they get the pages with stylesheet within and if they logout they will be redirected to same login page and the stylesheet is loaded correctly. Then if they restart the browser and try to login the application again, they will be faced the same problem.
    Is there anything else I can try?

  • URGENT:Eventing between two iviews in one page

    Hi all,
    I have developed a model in visual composer which contains
    two iviews in a single page .The first iview contains the input fields and the data service.The second iview contains the output form.I should get the output in the second iview when i click a button or a field in the table.I am unable to pass the data from one iview to another iview during thios process.And also help me in navigating between two different pages and data transfer between them.Please help me regarding this issue either by sending any documents or by giving useful suggestions,
    Points will be rewarded for helpful answer.

    Hi,
    see the modeler's  Guide
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe]
    For differenr layers creation
    Help .sap.com link  [http://help.sap.com/saphelp_nw04s/helpdata/en/ca/fbdb4269b2f340e10000000a1550b0/frameset.htm]
    Regards,
    Govindu

  • I have been sent a 'word document' in which are a series of boxes about thirty lines long to insure written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

    I have been sent a 'word document' in which are a series of boxes about thirty lines long to insert written text. When Pages opens the document it extends these to a whole A4 page how do I get it to retain the original layout

    You can't change the way Pages import .doc files.
    It was never written that it reproduce exactly the original one.
    From my point of view, as I refuse to give a cent to M...soft, the best way to deal with documents issued by their Office suite is to use the free libreOffice.
    Yvan KOENIG (VALLAURIS, France) jeudi 7 juillet 2011 11:34:19 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How to make one firefox window`s actions duplicate on all opened firefox windows. duplicating tabs only opens the original source of page, not current page view

    I want to know is there a way to open, say 3, Firefox windows and duplicate the actions done on one to happen across all open Firefox windows. I want to use the repeat feature, left click followed by ENTER the whole time on a current thing I'm working on. The tabs won't work because I have to flip through them the whole time. I'm currently doing this on two computers at the same time but need an easier way. If I duplicate tabs, it only opens the original source of the page I duplicate and not the current page I'm viewing so its a time taking process to click on the links where I need to be then start doing the control+tab. Speed is a major issue so any advice would be greatly appreciated.

    I am still trying to figure out what it is you are trying to do.
    You have X number of pages open, and you want what you do to one page
    to also be repeated on the other pages? Most browsers think that multiple
    pages are individual, and separate.
    What is it you are working on? No secured information, please.

  • How can I have more than one page open at a time?

    I would like to have more than one page open at a time- not tabs, but whole pages. How can I do this? I want to be able to have the pages side by side, instead of having to switch back and forth.

    Fox Splitter (formerly Split Browser): https://addons.mozilla.org/firefox/addon/4287

  • I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

    I am working on big project and in accidentally flatten the file and i saved it as PSD in then I exited Photoshop. the next time when i open the file it is merged on one page. please help!

    Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
    Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
    So that leaves you with two choices.
    You can either recreate the whole document.
    Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

  • "My Rooms" iView occupies whole page

    Hi,
    I have two iViews in a page with the Equal Width Page Layout. One of the iViews is "My Rooms" iView and no matter how much i fix the size of this iView, it continues to occupy the whole page. As a result i am unable to see the other iView in the page.
    Any help would be suitably rewarded.
    Regards,
    Vibhu

    Hi Vibhu,
    After you add the iviews to the page, the iviews get attached one below the other. Select the page layout of the page and see the positions of the iview. you can drag and drop iviews in the respective columns or place them one besides the other.
    As well verify the properties of both the iviews.
    Hope this helps.
    Thanks,
    Praveen
    PS. Dont forget to reward points if solved/useful.

  • How do i allow multiple pages to open in one page?

    Hi there,
    I want to be able to have one page with a left navigation where the viewer can click on the nav and get page content opening up on the right.  With each click of a new button on the nav, the content changes.  Like the apple site : http://www.apple.com/iphone/tips/
    Does anyone know how to do this?  I realise that frames used to do this i think but i know that's not the way to go.  Can anyone help?
    Cheers
    Nic

    No no no.
    What I'm saying is put the contents of what_is_it.html into the <desc> tag with CDATA to retain html elements. So your <desc> tag should look something like this:
    <desc><![CDATA[This is the desc area <b>with html elements</b>]]></desc>
    Which will render in your spry detial region as:
    This is the desc area with html elements
    Read this to see what I'm talking about.
    i wasn't able to view your XML
    One of my dynamically-generated spry xml datasets is located at http://DWFAQ.info/files/tutorials.php (view the source code to see xml syntax with embedded CDATA) If you store your info in a database and write your xml dynamically it is much, much easier to have control over your xml dataset. Then you can add, edit, and remove xml data dynamically by using insert, update and delete record server behaviors in Dreamweaver. Look Here to find out how to generate xml from a database dynamically although granted this may be a little over your head at this time since you're working with static html pages.

  • If I open another URL from my homepage, the "go back one page" button is grayed out so I can't get back to my home page.

    This problem only started recently.
    Opening another web page (URL) from my homepage always opens in the same tab and the "go back one page" button is gray and does not work. If I open a series of web pages in the same tab the green "back" button is green. Clicking on the "recent pages" down arrow will allow me to go back, but only to the page after the home page.
    In other words, after browsing, I can get back to the opening page (my home page) only by clicking on the house icon but not by using the "recent pages" function.
    Is there an option that changed after the last update?

    Do you see any tab history if you right click the Back or Forward button?
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • When I select a "compose email" from my GoDaddy email page, it opens up another whole Foxfire window. I can't seem to have it open into another tab instead.

    When I select a "compose email" from my GoDaddy email web page, it opens up another whole new Foxfire window. I can't seem to have it open into the existing Foxfire window but just another tab instead.

    Firefox diverts most new windows to tabs, but there is an exception when a website uses a script to specify the window's dimensions or removes some toolbars. To remove the exception, you can make a change under the covers. This could be awkward for genuine dialog windows that don't make sense to view in a separate tab, but if you find it more annoying than useful, you can easily switch back.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (3) Confirm that the '''browser.link.open_newwindow''' preference is set to its default value of 3 (divert new windows to a tab instead), or right-click > Reset to get that value
    (4) Double-click the '''browser.link.open_newwindow.restriction''' preference and change the value from 2 to 0 (that's a zero) and click OK
    Any luck?
    For future reference, the possible values for the window/tab preferences are:
    <strong>(A) browser.link.open_newwindow</strong>
    3 = divert new window to a new tab (<u>default</u>) (checked*)
    2 = allow link to open a new window (unchecked*)
    1 = force new window into same tab
    <strong>*</strong> First checkbox in Options &gt; Tabs
    <strong>(B) browser.link.open_newwindow.restriction</strong> - for links in Firefox tabs
    0 = apply the setting under (A) to ALL new windows (even script windows)
    2 = apply the setting under (A) to normal windows, but NOT to script windows with features (<u>default</u>)
    1 = override the setting under (A) and always use new windows
    <strong>(C) browser.link.open_newwindow.override.external</strong> - for links in other programs
    -1 = apply the setting under (A) to external links (<u>default</u>)
    3 = open external links in a <u>new tab</u> in the last active window
    2 = open external links in a <u>new window</u>
    1 = open external links in the <u>last active tab</u> replacing the current page

  • Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

    Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

    Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
    I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
    At any rate, best of luck to you!

  • Can i have multiple applications open on one page

    can i have multiple applications open on one page?

    JShimazaki wrote:
    Mac OS X Mountain Lion supports multitasking like cbs20 mentioned. Just like MS Windows just press alt+tab to switch to whatever applications you have open.
    Actually it isn't Alt-Tab on OS X, it's Command-Tab to use the Application Switcher.
    Also, Control+ left/right arrow key will switch spaces if that's what's desired.

  • Can't print off my statements like before...have to print one page at a time instead of whole statement...what gives?  did up dates ...updates no good?

    Can't print off my statements like I did before...have to print one page at a time now...what happened?   never had proble  before....I did an update that they said was available...did that cause the problem...Apple???

    Hi Charlott...
    Open System Preferences > Print & Scan then select the Print tab.
    Click:  Open Print Queue...
    Delete all documents in the queue
    Restart your Mac, turn off the printer then turn it back on then try printing.
    Not sure which update you are referring to. If you have Lion installed and updated to v10.7.3, I doubt that had any effect on printing.
    BTW... when you post, please tell us which Mac OS X you have installed. Thanks!  

Maybe you are looking for