Urgent : ORA-01426: numeric overflow on oracle 11g Active Data Guard
Hi
I have configured Active Data Guard on oracle 11g, for reporting purpose we will select mutliple querry on target side(10 users). we are getting 'numeric overflow erro'r on alert log file When we issuing multiple query on target side. PLeae let me know is this error will cause performance degrad. if it will degrade performance mean please tell me how to resolve this problem. Why the numeric overflow is comming . and it is not comming in the primary database, it is comming in standby database only. please any one help it is very urgent
is there any parameter To overcome this problme
Please please it is very important to me and very urgent .
Thanks
nafees
Edited by: Nafees on Jan 1, 2009 3:44 AM
Edited by: Nafees on Jan 1, 2009 3:54 AM
There is no one drowning.
Your house is not on fire.
The volcano has not exploded.
Please apologize for abusing this forum by claiming your issue is more urgent than other people's requests.
Then, and only then, should anyone help you. I know I certainly won't until I read your sincere apology and promise not to be abusive in the future.
Similar Messages
-
Oracle 11g Active Data Guard and SAP R3
Hi All,
I have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Thanks,
VihangI have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Oracle database 11g functionality certified by SAP, check below link
http://www.oracle.com/us/solutions/sap/oradb11g-article-upd-1-323074.pdf
http://www.oracle.com/technetwork/middleware/ias/downloads/osb-11gr1certmatrix.xls -
Oracle 11g Active Data Guard是怎么收费的?
原来在Oracle 10g中，DG是免费使用的，想请问一下，在Oracle 11g中，性能得到加强的ADG是怎么收费的？谢谢
FYI
Use customary EE Option License Practices
Active Data Guard license required if using either Real-time Query or RMAN block-change tracking on a standby
Example with primary and 5 separate standby databases
S1 = physical - real-time query
S2 = physical - real-time query + RMAN block change tracking
S3 = physical - RMAN block change tracking
S4 = physical - neither real-time query nor RMAN block change tracking
S5 = logical
Active Data Guard must be licensed for primary and for S1, S2 and S3.
Active Data Guard is not relevant to logical standby -
Oracle 11g Active Data Guard help ?
Hi Friends,
I successfully setup an Active data guard environment(11g). But, I dont know when the PROD database is highly utilize , its read only tasks like reporting and backup are doing in STANDBY. How can I know which db (prod or stand by) is used for these readonly operations ?
Regards
VishIt is not so simple to direct reports to the Physical Standby as you seem to assume.
You need to do some work for the setup.
See here for a description:
http://uhesse.com/downloads/real-time-query-presentation/
Kind regards
Uwe Hesse
Don't believe it, test it!"
http://uhesse.com -
ORA-01426: numeric overflow, while migrating "float" values
When I try to insert a value of *2.58612749363472E302* (originally a "float" in SQL DB) into an Oracle column of type float(126), I get this error "ORA-01426: numeric overflow"
I tried changing the column type to BINARY_FLOAT, BINARY_DOUBLE, but I still get same error.
I'm using Oracle SQL Developer (2.1.1.64.45) to migrate a SQL Server 2005 Database to Oracle 11g.
Do you have any thoughts on this? Or workarounds?
Thanks in advance.
ArulArul,
I have checked the Migration Workbench documentation where it says for float data -
Oracle® SQL Developer
Supplementary Information for Microsoft SQL Server and
Sybase Adaptive Server Migrations
Release 2.1
Table 2–2 Data Types in Oracle and Microsoft SQL Server or Sybase Adaptive Server
NOTE: If you try to migrate
floating point data greater
than or equal to 1.0E+126
then SQL Developer will fail
to insert this data in the
Oracle database and1 will
return an error.This also
applies to negative values
less than or equal to
-1.0E+126.
So, if I understand it correctly your value of 2.58612749363472E302 is outside this range.
Regards,
Mike -
ORA-01426: Numeric Overflow During Cube Build (Doc ID 1494869.1)
Our cube builds starting failing and we received this error after the cube log table sequence reached 32787.
After recreating the sequence the builds run successfully. This seems to be an unacceptable bug for an enterprise level product.
I have been unable to find a patch on the Oracle support site for it. Is a patch avaliable?
COMP_NAME
VERSION
OLAP Analytic Workspace
11.2.0.4.0
Oracle OLAP API
11.2.0.4.0
OLAP Catalog
11.2.0.4.0I found what appears to be a related bug Bug 14627371 - ORA-01426: NUMERIC OVERFLOW DURING CUBE BUILD
. This bug is marked as fixed in 12.1 of the database.
I think that you may want to pursue this issue with support to see whether this can be back-ported ton 11.2.0.4.0.
--Ken Chin -
Error message "ORA-01426: numeric overflow"
Could somebody please explain with me examples as when you get this error.
error message "ORA-01426: numeric overflow"
Thank You for your help.You get 1426 when a number, usually from a caclulation, is too big, or too small for Oracle to represent. For example:
SQL> SELECT POWER(99,99) FROM dual;
SELECT POWER(99,99) FROM dual
ERROR at line 1:
ORA-01426: numeric overflowwhich my calculator tells me is 3.6973E+197
TTFN
John -
ORA-01426: numeric overflow when creating job
Hello,
When executing the following script to create a job I get the error "ORA-01426: numeric overflow" . When I execute the same script on another database with same version and same configuration I do not get the error and the job is created.
Can anyone help me out solving this issue?
Script:
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job => X
,what => 'insert into dba.dba_logs values (''SGC'',''TRL03'',sysdate,null);
commit;
,next_date => to_date('07-11-2010 02:00:00','dd/mm/yyyy hh24:mi:ss')
,interval => 'NEXT_DAY(TRUNC(SYSDATE)+2/24,''SUNDAY'')'
,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
Database version: 11.2.0.1
OS: HPUXWe are planning to migrate to dbms_scheduler, but that's in the future. for now we have this error first to solve.
We also tried the following with dbms_scheduler and it gives the same error. The strange is that in another database with same version and same OS it works fine.
BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
job_name => 'JOB_CLIENTES_IN'
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=MINUTELY;INTERVAL=10'
,end_date => NULL
,job_type => 'STORED_PROCEDURE'
,enabled => TRUE
,job_action => 'JOB_CLIENTES_FTP_IN'
,comments => 'Job que carrega os ficheiros de pre-aviso de cliente'
END;
ORA-01870: the intervals or datetimes are not mutually comparable
ORA-01426: numeric overflow
ORA-01426: numeric overflow
ORA-06512: at "SYS.DBMS_ISCHED", line 124
ORA-06512: at "SYS.DBMS_SCHEDULER", line 271
ORA-06512: at line 2
Edited by: cibernauta on Nov 4, 2010 12:48 PM -
RMAN and 11g Active Data Guard
I just build my first 11g Active Data Guard . . . well the next thing to do is the RMAN part.
At this point I want to know:
A) How/What do you query to know that a log has been applied on the Standby side
B) How does RMAN know what has been applied
C) If I do the RMAN backup on the Standby side, won't there always be some difference because there is always some delay between the Primary and Standby?I presume you mean using RMAN to delete archive logs? If the log hasnt been shipped and applied to the standby yet RMAN wont remove it, instead it outputs the following error:
RMAN-08137: WARNING: archive log not deleted as it is still needed
Until the log has been applied on the standby, this intelligence is built in at 11G (at 10G you needed an "_" parameter to get this working).
Thanks
Paul -
[Oracle][ODBC][Ora]ORA-01426: numeric overflow
I have a function get data from data base and do some calculating. I call this function from ASP web page. Some times I got the following error. But if I click refresh later. It's ok again. Any ideas?
[Oracle][ODBC][Ora]ORA-01426: numeric overflowCause: Evaluation of an value expression causes an overflow/underflow.
Action: Reduce the operands. -
11g Active Data Guard Software?
I got a copy of the 11g (for SUN SPARC) from the edelivery.com, and got the patch for 11.1.0.7 from metalink.
I upgraded 110.2.0.4 to 11.1.0.7. But, I could not get the ADG to work.
Here is what happened when I queried the database status.
--------------------------- begin ---------------------------------
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open;
Database altered.
SQL> select status from v$instance
2 ;
STATUS
OPEN
SQL> select OPEN_MODE from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select OPEN_MODE from v$database;
OPEN_MODE
MOUNTED
SQL> select status from v$instance;
STATUS
MOUNTED
---------------------------- end ------------------------------------
Turning on the Redo Apply put the database mode back to 'MOUNTED'. For ADG, it should remain 'OPEN'. I suspect this copy of 11g does not have the ADG feature.
Is there a way I could check whether the ADG is installed? Is there a directory under $ORACLE_HOME or a script under $ORACLE_HOME/rdbms/admin that indicates the ADG is indeed installed?
Where did you guys get your software?
Thanks very much in advance.You should have the right software and the right option installations in Entreprise Edition (otherwise Data Guard would not work at all).
Did you check both alert log for possible error messages ?
I think you should open the database in read-only mode instead of read-write mode:
alter database open read only;See following OTN example: http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-dataguard.html
Edited by: P. Forstmann on Jul 9, 2009 9:29 PM
Edited by: P. Forstmann on Jul 9, 2009 9:34 PM -
Error ORA-01426: numeric overflow when Creating table with double data type
Hi,
I am using ODP.NET to create a table with data from SQL to Oracle. The problem is with double data type fields that is equivalent to FLOAT(49) in Oracle. My syntax is:
CREATE TABLE SCOTT.ALLTYPES
F1 NUMBER(10),
F10 DATE,
F2 NUMBER(10),
F3 NUMBER(5),
F4 NUMBER(3),
F5 FLOAT(23),
F6 FLOAT(49),
F7 NUMBER (38,5),
F8 NVARCHAR2(500),
F9 NVARCHAR2(500)
Th error is with field F6 but I am not sure what is the correct type equivalent to double in SQL.
I woul appreciate if anyone can help me with this problem.
SunnyDoes this simple test work for you?
In database:
create table float_test
f1 float(49)
);C# code:
using System;
using System.Data;
using System.Text;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace FloatTest
/// <summary>
/// Summary description for Class1.
/// </summary>
class Class1
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args)
// connect to local db using o/s authenticated account
OracleConnection con = new OracleConnection("User Id=/");
con.Open();
// will hold the value to insert
StringBuilder sbValue = new StringBuilder();
// create a string of 49 number 9's
for (int i = 0; i < 49; i++)
sbValue.Append("9");
// command object to perform the insert
OracleCommand cmd = con.CreateCommand();
cmd.CommandText = "insert into float_test values (:1)";
// bind variable for the value to be inserted
OracleParameter p_value = new OracleParameter();
p_value.OracleDbType = OracleDbType.Double;
p_value.Value = Convert.ToDouble(sbValue.ToString());
// add parameter to collection
cmd.Parameters.Add(p_value);
// execute the insert operation
cmd.ExecuteNonQuery();
// clean up
p_value.Dispose();
cmd.Dispose();
con.Dispose();
}SQL*Plus after executing above code:
SQL> select * from float_test;
F1
1.0000E+49
1 row selected.- Mark -
Looking for Active Data Guard in Oracle 11g Release 2 References
I want to reach out to customers who have implemented Active Data Guard in production (preferably 11.2), so that we can develop some
customer references that in turn will benefit other customers. The customers who get selected for such references may further be selected to publish their case study directly in oracle.com and/or invited as a customer co-speaker in the upcoming Oracle OpenWorld at San Francisco (Sep 19-23, 2010). Being a customer co-speaker at OOW means they get a free pass to the full conference (regular price for that is $1795-$2495).
Please send any follow-ups to [email protected]
Thank you.
Larry M. Carpenter
Oracle Data Guard & MAA Product ManagerHi Larry,
This is Bhavik Desai Oracle -DBA@Amazon. I do have couple of Active Standby running on 11gR2 On RHEL 5 64-Bit platform.
Most of the databases are reporting on (DSS Having 2-4 TB in size) having FSFO configured.
It would be a pleasure if i can provide any benchmarking to you on this.
Regards,
Bhavik Desai -
Using Oracle EM 11g with Active Data Guard 11g
Has anyone installed Active Data Guard 11g with OEM 11g for an active-active state or know if there are any installation procedures with these two products? We will be installing these products this year. Thanks, Cathy
If you already have both servers configured in Grid Control as targets, it should be fairly easy to create a standby database on server B. OEM has Availability tab on your primary database Instance section should have "Data Guard" section which has "Setup and Manage" option. You follow through the wizard, and it will generate a standby database on server B. Then you can convert your standby db on server B to Active Read-only database by clicking few more buttons.
If you do not have these two servers configured on your Grid Control, that would be the first task.
We set up three standby databases using Grid Control 11g in our test boxes, and they worked very well. Our biggest problem was to actually installing the Grid Control, but once installed, everything was easy. -
Error in Starting Oracle BAM Active Data Cache
I am not able to start "Oracle BAM Active Data Cache" on my machine.
The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
When I see the event log file of my Computer I could see the details as below:
Event Type: Error
Event Source: Oracle BAM Active Data Cache
Event Category: None
Event ID: 0
Date: 2/7/2007
Time: 3:51:25 PM
User: N/A
Computer: CHNANDA-WXP
Description:
ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.DataAccess.Client.OracleConnection.Open()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Could anyone pls help me?
Thanks and Regards,
Chinmaya Nandahi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default is oraclebam or orcl ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter
Maybe you are looking for
-
Hello, I created a form in InDesign then exported it to Acrobat Pro where I added numerous fields and enabled "Usage Rights" so I could email the form to customers to fill out, save and email back. The problem is when I open the forms that have been
-
GregorianCalendar: I seem to always be five (5) hours head in my value.
The following just outputs the milliseconds of the current datetime in Central Standard Time (CST). What I am try to test is this line: calendar.add(Calendar.HOUR_OF_DAY, 0);When I try the following: package test; import java.util.Date; import java.u
-
Transport Vendor Rate Contract
Hi, We need to develop system in our company is as under. We have transport vendor and we are doing Rate contract with Transport vendor (Destination wise) then taking approval from authorize person, after approval we are issung lette in word. once a
-
Receiving CRW32.exe error when starting Business Objects XI
I have a user receiving a CRW32.exe error every time she try's to start Business Objects XI and she cannot even run the application. I have already tried uninstalling / re-installing the product and removing all related registry keys with no success.
-
How do I access app updates with an id that is no longer valid and have changed to new id? when updates appear I'm asked for PW for old id that is no longer active.