Urgent phone installation required

SUMMARY to the point:
So I'm asking any BT installation phone line (and fibre optic broadband) STAFF in the east london area or willing to travel east ham 2 mins from the station I would be really much appreciative if they can come install BT LINE.
Post code:E6 2JJ
I required a new line installed but iv been given appointment in 4 weeks time on Jan 13th 2014.
This is a matter of urgency I would like if their is genuine kind excellent bt installation guy that can do me a big favour and come install iv heard it takes less then 30mins.
My eldery parents can't receive landline calls as we don't have phone line.
And no broadband Internet we are having to pay using dongle/mifi and this is very expensive short term.
I require BT infinity set up too. But getting a phone line is urgently first important
I understand their is this Is the holiday season and many staff are off but I'm quite certain that you have many staff in London that don't celebrate x mass and can take out an hr of the day to do this urgent request.
Iv explained my situation to customer service they are unable to bring a closer date. But said if I knew of any BT guy that can do it then it's possible.

Welcome to this forum.
This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
The date you have been given, would be the earliest appointment that Openreach could offer to BT Retail.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • My mac OS X 10.4 doesn't support new I tunes 10 it needs a SO X 10.5 or higher. My new I phone G4 requires a higher version. I can't download my existing library to my new phone.  What can I do?

    My mac OS X 10.4 doesn't support new I tunes 10 it needs a SO X 10.5 or higher. My new I phone G4 requires a higher version. I can't download my existing library to my new phone.  What can I do?

    upgrade to at least OS X 10.5.x or, if your machine supports it, OS X 10.6.
    you should still be able to get 10.5. from Apple but it'll run you about $ 130. OS X 10.6. costs $ 30.

  • How to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

    how to use the apple store? is there any google account needed? cause in my phone gmail requires.. help please

    raynee88 wrote:
    how to use the apple store?
    What is an Apple ID?
    How do I get an Apple ID?
    From here  >  http://support.apple.com/kb/HT5622

  • APEX 4.0.1 installation requirements

    Hi guys,
    the installation requirements document states that a minimum release of 10.2.0.3 is required. What does that mean exactly with regard to the compatibility parameter?
    When I run this script:
    PROMPT ***
    PROMPT *** Minimum Oracle Version for APEX:
    PROMPT ***   APEX 1.x-3.2: >= 9.2.0.3 and Oracle XE
    PROMPT ***   APEX 4.x: >= 10.2.0.3 and Oracle XE
    PROMPT ***
    DECLARE
       l_version         VARCHAR2 (100);
       l_compatibility   VARCHAR2 (100);
    BEGIN
       DBMS_UTILITY.db_version (VERSION            => l_version,
                                COMPATIBILITY      => l_compatibility
       DBMS_OUTPUT.put_line (   'Version: '
                             || l_version
                             || '  Compatibility: '
                             || l_compatibility
    END;
    PROMPT ***
    PROMPT *** v$version
    PROMPT ***
    column banner format A100;
    SELECT banner
      FROM v$version;I get the following result:
    *** Minimum Oracle Version for APEX:
    ***   APEX 1.x-3.2: >= 9.2.0.3 and Oracle XE
    ***   APEX 4.x: >= 10.2.0.3 and Oracle XE
    Version: 10.2.0.4.0  Compatibility: 10.2.0.1.0
    PL/SQL-Prozedur erfolgreich abgeschlossen.
    *** v$version
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE     10.2.0.4.0     Production
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - ProductionDo I fulfill the requirements or not ?
    Cheers,
    Dietmar.

    Hi Dietmar,
    Yes - you fulfill the requirements. In a true 10.2.0.1 DB environment (not XE), you would not even be able to install APEX 4.0.1.
    The primary requirement for database version 10.2.0.3 is the change made to SYS.DBMS_SYS_SQL.PARSE, where the ability to observe database roles was added. I highly doubt this feature would be disabled by setting compatible to 10.2.0.1.
    Joel

  • Installer requires Admin Privilege to run

    I'm a new user on a Macbook. Its been about 20 years since I last was on an apple. I need help, I'm trying ton install a game on my laptop. When I click on the installer to install the game a window pops up saying "installer requires Admin privilege to run" and the only option is to quit. What do I need to do to get this game installed?
    Thanks so much!!

    /Applications/Utilities/Disc Utility - a very handy tool in all sorts of situations.
    I'm most surprised that a new account with admin permissions wasn't able to perform the install I'm at a loss what might be causing that to be honest ... maybe the repair permissions on the drive will sort it out, perhaps the entire folder has had write access removed somehow. You could select the destination folder location and Get Info on it and look at the permissions settings at the bottom, does it allow any user to Write there or is it Read only I wonder ?

  • Why do I get the message "The installer requires admin priviledges to run" when trying to install from a DVD?

    I am trying to install software from a DVD on my Mac Mini, When I click on the installer I get the message "The installer requires admin priviledges to run." I have admin priviledges when I look at the account info in Sytem Preferences. ANyone have an idea what to do about this?

    It's a defective installer. If it needs elevated privileges to run, it should prompt for an administrator password. Since the installer is defective, you can assume that whatever it installs -- or would install, if it worked -- is also defective.

  • HT5278 I am trying to unlock my phone - this required me to download itunes onto a friend's PC in PNG. Now it won't restore  the phone (which I have to do in order to unlock it) without downloading this 800Mb file, which will cost me approx AUD$200. Help.

    I am trying to unlock my phone - this required me to download itunes onto a friend's PC in PNG. Now it won't restore  the phone (which I have to do in order to unlock it) without downloading this 800Mb file, which will cost me approx AUD$200. Help.
    Are there any other options out there?

    Nope. You need an .ipsw file to restore your phone & since your friend didn't have iTunes, obviously there is no current .ipsw file to use. You can go to an Apple store, use your own computer, find another computer, but you can't restore without a current signed .ipsw file.

  • Urgent Full Time Requirement for SAP Senior FI/CO Analyst

    Hi,
    Any one looking for Urgent Full Time Requirement for SAP Senior FI/CO Analyst
    Moderator: This is not job board. Upon second violation your user will be banned

    Hi,
    Any one looking for Urgent Full Time Requirement for SAP Senior FI/CO Analyst
    Moderator: This is not job board. Upon second violation your user will be banned

  • Why do i get a "codec installation required" message?

    Why do i get a "codec installation required" message when trying to play avi files? Im using QT7 on a mac, v10.6.7?, Why do i get a "codec installation required" message when trying to play avi files? Im using QT7 on a mac, v10.6.7?

    Why do i get a "codec installation required" message when trying to play avi files?
    Probably because you do not have an audio and/or video codec used for compressing/decompressing data in the AVI file. AVI, like MOV, are just file containers capable of holding many different kinds of data. The originator of the AVI file (Microsoft) dropped its official support of this file type more than a decade ago but its popularity with Windows users lingers on. Unfortunately, with few exceptions, the compression formats commonly used in the AVI file container may or may not still be in use. Some were never transcoded for use on the Mac platform. Others are so old that they have never been updated for use under OS X. Of thise transcoded for OS X use, some have not been updated for Intel based platforms. Thus, while QT supports the container itself, it does not natively support the third-party and/or proprietary codecs used, many of which, are now classed as "legacy" codecs and are out of date in terms of today's video compression technology.

  • Do not use iOS 7. Attempting to install iOS 7 will cause your phone to require a factory reset, thus wiping all your data from the device. Save your data, do not attempt to install the new iOS 7.

    Do not use iOS 7. Attempting to install iOS 7 will cause your phone to require a factory reset, thus wiping all your data from the device. Save your data, do not attempt to install the new iOS 7.

    My phone has been in the Preparaing Iphone for Restore mode for over 2 hrs. I have the following on the itunes page
                Iphone Recovery Mode
              Itunes is restoring the software on this Iphone. 
    I have the Itunes icon and the USB cord display on the iphone home screen
    So I still have 3 hrs to go???  WOW

  • Installer: Installation requires Windows XP

    Hi,
    when creating an installer with Win XP and LV 2009, I can check the box for requirements: Win 2000 or higher.
    But, when trying to run the setup.exe on a Win 2000 system, the error message: This installation requires Windows XP pops up.
    Any help?
    Thx in advance,
    Thomas
    Solved!
    Go to Solution.

    You should make a verbose log, and test my last tip (also combined with my first tip) here http://forums.ni.com/t5/LabVIEW/Win2000/m-p/1238020#M524213 I do not have any Win2000 systems any more so I can not test it. I suspect it is the installer system itself that require windows XP
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Installation Requirements for Oracle Apps Forms and Report Services OEL

    Hi all.
    Where can i find detail information about the installation requirements for Oracle Application Server Forms and Report Services under OEL 4 (Oracle Enterprise Linux) or OEL 5?
    It seems there's only information about Oracle Application Server in general, not the reduced or partiuclar distribution, Forms and Reports Services.
    Thanks in advance ....!

    I already saw the documentation for Forms and Reports Services Installation.
    This thread is about the specific requirements, if any, for this product on OEL 5 or OEL 4.
    See, there's a note on Metalink(546174.1) regarding some specific issues about installing Oracle Application Server on OEL5, but i'm not sure if this involves Oracle Application Server Forms and Reports Services.
    The idea is to know if these issues applies to this specific distribution .
    Hope you understand my question now. Thanks in advance

  • This installer requires admin privileges to run

    I'm trying to install a new Application (ViaCAD 2D/3D). I get the message "This installer requires admin privileges to run" with no option to enter admin password.
    Thing is, I am clearly the Admin user with all privs.
    Searched a lot of forums and tried a lot of ideas... but to no avail. Prior installations proceeded without error. Of course, the manufacturer support simply blamed Apple and closed the support question. Console log shows no errors.
    This one has me totally stumped (and I have 20+ years admin experience).

    Update:
    The application installed on another system running 10.4. On the offending system, I tried another Admin account, ran repair permissions from Utilities, made sure Admin had R/W privs on Apps folder, moving the .dmg file to the Applications folder, did a reboot, searched for a VidCad plist file. Out of ideas.

  • BI JAVA Installation require EP CORE ,EP

    Hello,
    While installation BI JAVA with sapinst ( version 7 )  requires EP CORE ,EP
    Can we install BI java only by using EP Core  and EP installed on diff. host. ( another system)
    Thanks in advance.
    Regards,
    Tushar

    AFAIK the answer is NO.
    BI Java "lives" in the Java stack and needs EP, EP Core and stuff like ADS as its software base.
    So IF you already have another EP, now you have two of them and are maybe faced to think about things like federated portals.
    See articles in SDN's https://www.sdn.sap.com/irj/sdn/portal
    What you CAN do is install the BI Java stack on a separate machine.
    What I do not believe you can is installing the BI Java stuff into an existing EP.
    HTH, Rudi
    Message was edited by: myself to clarify
            Rudolf Wiesmayr

  • A family of 5, have new iphone 4s phones.Because we shared an itunes     account previously, now when installing the new phones, it does not allow us to update to individual itunes accounts.  How do we change the accounts for each phone installation?

    A family of 5, have new iphone 4 s phones.
    Because we shared the itunes account previously, on installation of the new devices, the computer does not recognise individual itunes accounts.
    So all 5 devices are sharing the same itunes account!!!
    How do we set up new accounts on each individual phone?

    The iTunes stores in different countries are entirely separate.  You can only use an iTunes store credit in the country in with it was created and purchased content cannot be shared across countries.  Family sharing groups must be country-specific, using iTunes store credits for purchases only within that country, and sharing purchases that were made in that country.  You can contact iTunes store support for more details on these restrictions here: https://www.apple.com/emea/support/itunes/contact.html.

Maybe you are looking for

  • Acrobat 9/9.1  - Coruption when export to Word

    Hi, I have been using Adobe Acrobat 9 for a few months now, both in version 9 and 9.1 I have recently been asked to utilise the export to Word feature, which from experience in version 8, has and should be a relatively painless process. However, to m

  • Webdynpro ABAP not working from internet

    Hello, I´m new at webdynpro and portal... We have a ess portal with webdynpro abap and java. Our employees may access it from intranet and all works fine, and from internet when they are in the outside. From internet the webdynpro abap gives the mess

  • What disc formats are supported by Remote Disc

    We just purchased a Macbook Air. We have a Dell PC with Windows XP SP2 that we set up for remote disc sharing (using the most recent version of the Windows remote sharing software). Much to my surprise, when I put the OS X disc into that system, it w

  • Saving css doesn't hold in preview

    I'm running through some tutorials and every time I save the css to preview the page in the browser none of the properties are displayed.  It looks fine in Live view and I know that I have to save the css file before previewing but I must be doing so

  • New font files do not appear in FW CS4

    I've opened and cles FW several times and rebooted to no avail. Is there a trick? Thanks!