Urgent !! -Please Help -Leaving action delimits IT 0017

Hello Gurus,
At the moment when you run the Action to make an employee a leaver in HR
the Action delimits Infotype 0017 Travel Privileges.  This then means
that if the Travel & Expense Department need to go and view
expense claims for that employee the system does not permit it as it
states there is no Infotype 0017 valid.
I have advised the to remove the delimit function from the Action
for Infotype 0017, this will then mean that the Travel & Expense
Department can view historical expense claims for all employees.
Pls help how to remove the delimit function form the action type?
Or is there any other way to avoid the IT0017 from getting delimit
Thanks & Regds,
N.babu

Hello Gurus,
With ref to my above question, my client is having a problem -
They need to remove the travel privilege screen from this leavers action, so that when an employee leaves, they are delimited, but the travel privileges are still active.
They have had a problem with leavers, as once they have been run as a leaver, and they have been delimited, s they have an error when trying to view the history of their claims in PR05.
After investigation of this it seems that this is caused by the travel privileges being delimited.
So we need this to be taken out of the leavers action, so that the other items are still delimited but NOT the travel privileges.
Pls suggest....
Points are assured!!
thanks & regds,
Nbabu

Similar Messages

  • Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

    Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
    I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
    26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
    26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
    26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
    26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
    26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
    26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
    26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
    26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
    26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
    26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
    Looked all over computer and cant find anything of Sophos please help very urgent!

    That was all that there was in the most recent one, how long do you think it could take to fix?
    Here is the second most recent:
    Wed Sep 25 15:39:39 2013
    panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
    RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
    R8:  0x000000000000000a, R9:  0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
    R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
    RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80b0dbb3c0 : 0xffffff8000220792
    0xffffff80b0dbb440 : 0xffffff80002c4794
    0xffffff80b0dbb5f0 : 0xffffff80002da55d
    0xffffff80b0dbb610 : 0xffffff7f81757965
    0xffffff80b0dbb820 : 0xffffff7f817667a0
    0xffffff80b0dbb840 : 0xffffff7f8173a58e
    0xffffff80b0dbb870 : 0xffffff7f8177fb6f
    0xffffff80b0dbb8a0 : 0xffffff7f81779632
    0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
    0xffffff80b0dbb900 : 0xffffff7f8177c6db
    0xffffff80b0dbb9e0 : 0xffffff7f817412b8
    0xffffff80b0dbba10 : 0xffffff7f81778684
    0xffffff80b0dbba30 : 0xffffff7f817449ce
    0xffffff80b0dbbb60 : 0xffffff7f81741a4c
    0xffffff80b0dbbbc0 : 0xffffff8000655f3e
    0xffffff80b0dbbbe0 : 0xffffff800065681a
    0xffffff80b0dbbc40 : 0xffffff8000656fbb
    0xffffff80b0dbbd80 : 0xffffff80002a3f08
    0xffffff80b0dbbe80 : 0xffffff8000223096
    0xffffff80b0dbbeb0 : 0xffffff80002148a9
    0xffffff80b0dbbf10 : 0xffffff800021bbd8
    0xffffff80b0dbbf70 : 0xffffff80002aef10
    0xffffff80b0dbbfb0 : 0xffffff80002daec3
          Kernel Extensions in backtrace:
             com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    11G63b
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 1866666823698
    last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
    last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
    loaded kexts:
    com.sophos.kext.sav          8.0.14
    org.virtualbox.kext.VBoxNetAdp          4.2.16
    org.virtualbox.kext.VBoxNetFlt          4.2.16
    org.virtualbox.kext.VBoxUSB          4.2.16
    org.virtualbox.kext.VBoxDrv          4.2.16
    com.logmein.driver.LogMeInSoundDriver          1.0.2
    com.Greatdy.driver.SystemAudioCapture          1.0.0
    com.apple.filesystems.smbfs          1.7.2
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.AppleIntelHD3000Graphics          7.3.2
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.driver.AppleIRController          312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.iokit.SCSITaskUserClient          3.2.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCISerialATAPI          2.0.3
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.kext.triggers          1.0
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4

  • Urgent please help, this program should work

    Urgent please help.
    I need to solve or I will be in big trouble.
    This program works at my home computer which is not networked.
    The hard disk was put onto another computer at another location whihc is networked. Here my program worked on Monday 14 october but since for the last two days it is not working without me changing any code. Why do I receive this error message???
    Error: 500
    Location: /myJSPs/jsp/portal-project2/processviewfiles_dir.jsp
    Internal Servlet Error:
    javax.servlet.ServletException
    at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
    at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:162)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java)
    at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
    at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
    at org.apache.tomcat.core.Handler.service(Handler.java:235)
    at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
    at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
    at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
    at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
    at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
    at java.lang.Thread.run(Thread.java:536)
    Root cause:
    java.lang.NullPointerException
    at jsp.portal_0002dproject2.processviewfiles_dir_1._jspService(processviewfiles_dir_1.java:132)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java)
    at org.apache.tomcat.facade.ServletHandler.doService(ServletHandler.java:574)
    at org.apache.tomcat.core.Handler.invoke(Handler.java:322)
    at org.apache.tomcat.core.Handler.service(Handler.java:235)
    at org.apache.tomcat.facade.ServletHandler.service(ServletHandler.java:485)
    at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:917)
    at org.apache.tomcat.core.ContextManager.service(ContextManager.java:833)
    at org.apache.tomcat.modules.server.Http10Interceptor.processConnection(Http10Interceptor.java:176)
    at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:494)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:516)
    at java.lang.Thread.run(Thread.java:536)

    foolishmatt,
    The code is quit large.
    to understand the program I think all the code needs to be examined.
    I would need to send to you in an email.
    Here is my e-mail
    [email protected]
    if you contact me than I can send the code to you.
    Thank you in advance.

  • Urgent, Please help me in this problem.I am getting problem while installation

    I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally  when i click on install button i am getting the following error .
    please help me quickly. I well be thankful to you.

    Triple post meanwhile:
    http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
    http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

    Hi,
    Can anyone tell me some idea in the below mentioned details.
    Iam creating a Function for Encrypting and Decrypting Data Values using
    DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
    Key Value as normal.
    But the problem, is it possible to have the key value more than 8.
    Its showing me error when i give the key value less than 8 or more than 8.
    Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
    Its Very Urgent, Please Help.
    Thanks,
    Murali.V

    Is this what you're looking for?
    Usage Notes
    If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
    If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
    If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
    C.

  • Date format Problem in OAF R12 Urgent Please help!!!

    We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
    In this there are two date fileds getting dispayed on the page and the query for the same is
    SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
    In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
    Start Date 04-Nov-5242
    End Date 04-Nov-5241
    As per logic it should be
    Start Date 09-Feb-2012
    End Date 10-Feb-2012
    Please help..Urgent issue.

    Here are the answers to your problems :
    1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
    OracleOraHome81TNSListner and
    OracleService<your SID name>
    are configured as manual start ( check the NT --> start>setting>control panel>services. )
    For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
    < for this double click on the respective service, select the "Automatic" radio button and click on ok>.
    Now when you restart the machine, your database will be automatically mounted.
    2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
    hope this helps.
    bye.
    Hi All,
    I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
    I have installed it on windows NT 4.0 .
    Installation is fine.
    I can access or get into SQL prompt .
    I have created a database also.
    1st problem
    My problem is once I restart the Machine and try to access SQL plus .it gives me an error
    ORA-01034: Oracle not available
    ORA-27101: shared memory realm does not exist.
    2nd problem
    I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
    How do i do this .
    This is very urgent please help.
    regards,
    Preeti

  • Hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode

    hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys

    - See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - Next try letting the battery fully drain. The try again.

  • Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.

    Hi all ,
    Very Urgent, Please Help me on this issue.
    when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
    Selvam

    Is your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.

  • ORA-04062 - very urgent, please help

    Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
    I have the master database:
    db_master
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE 10.2.0.3.0 Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    and replica database:
    db_replica
    Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
    PL/SQL Release 10.2.0.3.0 - Production
    CORE 10.2.0.3.0 Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    the master and replica databases are installed at different hosts
    At db_master:
    1. I create table TEST
    CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
    2.Then create materialized view log on TEST
    CREATE MATERIALIZED VIEW LOG ON TEST;
    At db_replica:
    1. create dblink MASTER to db_master
    2. create materialized view
    CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
    At db_master:
    1.Insert some test values to TEST
    INSERT INTO TEST VALUES (1);
    INSERT INTO TEST VALUES (2);
    INSERT INTO TEST VALUES (3);
    COMMIT;
    At db_replica:
    1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
    begin
    DBMS_MVIEW.REFRESH('MV_TEST');
    end;
    sometimes (not at every call the below error callstack appears)
    17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
    17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
    17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
    17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
    17:07:22 ORA-06512: at line 4
    Please, help me solve this problem, what cause ORA-04062?

    Zjawka,
    This forum doesn't consist of paid support personell.
    Labeling your request as 'very urgent' must be considered rude.
    If you would have looked up the error at all in the online documentation,
    you would have got:
    ORA-04062: %s of string has been changed
    Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
    Action: Recompile the caller in order to pick up the new timestamp.
    No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
    Sybrand Bakker
    Senior Oracle DBA

  • REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

    Hi,
    I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
    Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
    In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
    Thanks
    Feroz

    The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
    I am afraid some of reports engine failed to start and you get nothing back in your case.
    After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
    Hope this helps.
    Thanks,
    -Shaun

  • URGENT please help Prob in implementing fi validation checking - zrggbr000

    Hi SAP Expert,
    I'm currently working on FI Validation checking (ZRGGBR000) to control amount posted to asset number. Thus, I use an internal table declared in ZRGGBR000 to keep all the balance to be posted from 1 FI doc no and compare it with the limit (taken from customized table). But i'm having a prob,specifically while doing several Goods Issue (GI) posting continously without leaving the transaction MIGO. This is because the internal table i declared previously in ZRGGBR000 was not refresh automatically. The same thing happens while i'm doing the SES (ML81N).
    Is there any way i can do to refresh this internal table?
    any help, assistance and guidances are very much appreciated and will be very greatfull for the fast reply.
    thanks & rgds,
    fn
    Message was edited by:
            fnr n

    Hi SAP Expert,
    Really need your advice and guidance, Please help me.  I'm currently working on FI Validation checking (ZRGGBR000) to control amount posted to asset number. Thus, I use an internal table declared in ZRGGBR000 to keep all the balance to be posted from 1 FI doc no and compare it with the limit (taken from customized table). But i'm having a prob,specifically while doing several Goods Issue (GI) posting continously without leaving the transaction MIGO. This is because the internal table i declared previously in ZRGGBR000 was not refresh automatically. The same thing happens while i'm doing the SES (ML81N).
    Is there any way i can do to refresh this internal table?
    For help, assistance and guidances are very much appreciated and will be very greatfull for the fast reply.
    thanks & rgds,
    fn

  • Activation of new data in ODS results in errors. Urgent.please help...

    Dear experts,
    I have a problem while I load data from one ODS object into another one. I have some keyfigs which when loaded into the ODS are ok. (I mean the new data is ok) but the moment I activate the request, the keyfigures are turned automatically to zero. This peculiar performance is not observed in any of our development and certification systems. Another thing, is that the data load is an initial load and there exists nothing in the change log table as well before the load.
    Any thoughts are highly appreciated. Any SAP notes on this issue??? Please help... urgent...
    Kind Regards,
    Shravan

    Hello Prasad/Rohini,
    Thanks for helping me. Yes, I checked the update rules and they are ok. The problem is not with the update rules, I guess. I delete the data first in ODS 1 and from ODS2 I load the data into ODS1. The data load is an init update. After loading the data, before activating the request, The new data is all ok. The key figure data is all as that is guided by the corresponding update rules. The moment I activate the request, the active data is all wrong. My Question is why the table containing new data is correct and after not after activating???
    Since it is an initial update, I do not think change log should come into picture???
    Any ideas???
    Kind Regards,
    Shravan

  • Urgent:Please Help. Need to deploy web application with servlet:(

    Tomcat 4.0 is already installed.
    Trying to deploy a web application and invoke a servlet through it.
    Here is the command I am using for deploying the application:
    http://localhost:8080/manager/install?path=/NewApplication&war=file:d:\Tomcat4\webapps\NewApplication
    The application get deployed. However, I have a problem. As soon I stop and restart the server, this application is gone.
    1. Please someone help: How should I make it permanent so that the application stays even if I restart the server.
    2. I am not able to access the servlets placed in the /WEB-INF/classes/ sub-directory under NewApplication directory.
    If you need I can cut and paste the web.xml file which will show the deployment descriptor.
    Please help: How do I make this work. I need it urgent.
    Any help will be appreciated.
    Thanks,
    Indrasish.

    The simplest solution would be to put the war file inside the webapps directory and restart the server. You should be able to access the app using the http://servername/app

  • Urgent please help

    hi all,
    we are running two instance in two different machines A and B (oracle 9.2.0.1.0/win2000). we exported the data from A and copied to machine B.data has not been modified since 'copy'.
    now the problem is , the following query
    select count(*)
    from table1@xyz c
    inner join table12 a on a.party_id = c.account_id
    inner join table3 m on m.old_id = c.id
    give 0 in machine A and the same qurey gives 23453 in machine B.
    and another thing is if we trim all the columns involved in the join condition and run it in machine A then it gives 23453 as in machine B.what could be the problem in machine A.please help,as the issue is urgent one
    i have given the structures..
    table1
    Name Null? Type
    ID NOT NULL CHAR(20)
    TIME_STAMP NOT NULL VARCHAR2(100)
    ACCOUNT_NO NOT NULL CHAR(25)
    ACCOUNT_ID NOT NULL CHAR(20)
    CURRENCY_ID NOT NULL CHAR(20)
    AMT_BOOKED NOT NULL FLOAT(126)
    AMT_PAID NOT NULL FLOAT(126)
    AMT_OUTSTAND NOT NULL FLOAT(126)
    AVL_CREDIT NOT NULL FLOAT(126)
    FLAGS NOT NULL CHAR(10)
    table12
    Name Null? Type
    ID NOT NULL CHAR(20)
    TIME_STAMP NOT NULL VARCHAR2(100)
    PARTY_ID NOT NULL CHAR(20)
    ACCOUNT_ID NOT NULL CHAR(20)
    table3
    Name Null? Type
    OLD_ID NOT NULL CHAR(20)
    NEW_ID NOT NULL CHAR(20)

    Hi, you can generate and check an explain plan on each server, and compare them.

  • URGENT: Please Help....Can't make or receive calls on Z10

    Hi, 
    I bought a Z10 about a month ago. Updated it as soon as the 10.2 was available officially and it has been running perfectly. Tonight, however, I was on a call and suddenly the audio went away. I tried disconnecting from the call but it wasn't disconnecting despite several attempts until I gave up and pressed the power button to re-boot. Since I have rebooted, I can't make or recieve calls. Everytime I try to dial a number it immediately shows call ended. I also can't recieve any calls. I have full network, and can do everything else including surf the web, sent texts and BBMs. What seems to be the problem?? Please help as it is kinda urgent
    Solved!
    Go to Solution.

    Well wait and see till after you backup and do the battery pull. I guess you are backing up with Link and you know how to Restore so the below is a pre written file just in case and if you click one of those links you can scroll to the bottom of the page and change the country.
    You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
    To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
    Once Wiped reconnect your phone to your computer and install your stuff.
    http://us.blackberry.com/software/desktop/blackberry-link.html
    http://ca.blackberry.com/software/desktop/blackberry-link.html

Maybe you are looking for

  • Installing Bootcamp 3.0 drivers

    Could anyone explain why I'm getting the message "Bootcamp x64 cannot run on this computer and model" when I'm running x64 Windows 7 on a x64 Macbook?

  • [FIX] Yoga 13 Windows 8.1 Touchpad and Pixelated Windows.

    Hello everybody! This would be my first post in this forum. I thought that I had to share this since I wasn't able to find a fix for the Touchpad. And since I was also able to solve the pixelated windows issue, I thought I might want to share it.  [I

  • Will nokia c5-00 be updated to symbian belle ?

    will nokia release any new update for c5 to improve browser and time changing bug. Are we going to get anything above 71.005 . It is said that nokia is changing its phones from symbian to 'nokia belle' tag line. Can c5 expect the same or has the comp

  • How do I loop a movie for Apple TV

    I have looked at the archives and I cannot get it to work the way it is explained. I have saved a QT movie with Loop checked. It loops fine after it is saved before I send it to iTunes When I send it to iTunes it will not loop. For some reason when I

  • Changing File Permissions via FTP for WordPress

    Hi, I access files for a WordPress installation via FTP and when I try to change permissions to some files for some plugins compatibility issues I get the error below and the permissions are not applied. SITE CHMOD 747 colors.css Response: 500 'SITE'