URGENT: Problems with dialing by name

Since synching with my PC, my contact list of 750 is visible until I start typing letters to narrow a search for a specific name, and then most of the names that should be visible by the search disappear?!? Only a small portion of the 750 seem to be part of the search when I type letters to find names, I think related to those I've edited on Outlook. Any help greatly appreciated. I have checked Address Book filter, and I have no filters.
Solved!
Go to Solution.

Removing the battery and rebooting worked for me until I used the business filter to search an address. Then the problem started all over. Each time I try to type a name to call, it only gives me the names from the business categories until I remove the battery and reboot again. Any one know a way to keep this from happening without taking my battery out each time?

Similar Messages

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Problem with Connection Broker name

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM
The services needed to be restarted, now im facing another problem with the new name:
error: "Remote Desktop can't connect to the remote computer "NewBrokerName.domain.com" for one of these reasons:
1) Your user account is not listed in the RD Gateway's permission list.
2) You might have specified the remote computer in NetBIOS format ( for example, computer1), but the RD Gateway"
EDIT: Also solved this error RD Gateway was only allowing connections to Domain Computers, change to all resources

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

Problems with song's names in iTunes Store

So, I have a problem with song's names in iTunes Store on my iPhone 6+ 128. with 8.2
You can see it on attached screens.
I tried to change the font size and erase the phone and then install it again by default. The problem manifests itself on 6+ and didn't on my iPad with the same program version.

That's really curious. Sorry I don't have anything else by way of potential solutions to offer, but it may be worth contacting Apple about this one.
http://www.apple.com/support/contact/

URGENT: problem with orasso.wwsso_api.authenticate_user warn_code

I am facing a problem with a certain API call in Oracle 10g Portal (9.0.4) while it is running with an infrastructure database of Oracle9i Enterprise Edition Release 9.0.1.5.1.
I am trying to access a user authentication api in the ORASSO schema. This api wwsso_api has one sole procedure 'authenticate_user' and here is a description of this procedure.
ORASSO> desc wwsso_api
PROCEDURE AUTHENTICATE_USER
Argument Name                  Type                    In/Out Default?
P_USER                         VARCHAR2                IN
P_PWD                          VARCHAR2                IN
P_COMPANY                      VARCHAR2                IN     DEFAULT
P_WARN_CODE                    NUMBER                  OUT
ORASSO> and when i try to call this procedure, the api call itself gives numeric or value error.
ORASSO> DECLARE
2        v_warn_code   number;
3        v_pt          varchar2(10):='0';
4        ERR           exception;
5 BEGIN
6        v_pt :='1';
7        WWSSO_API.authenticate_user(p_user=>'myusername',
8                                    p_pwd=>'myalphanumericPwd',
9                                    p_warn_code=>v_warn_code);
10        v_pt :='2';
11        if nvl(v_warn_code,99)=99 then
12           v_pt :='3';
13           RAISE ERR;
14        end if;
15        v_pt :='4';
16        dbms_output.put_line('v_warn_code = '||nvl(to_char(v_warn_code),'nothing')||'<br>');
17        v_pt :='5';
18
19 EXCEPTION
20        WHEN ERR THEN
21           dbms_output.put_line('ERROR= ERR: v_warn_code = '||nvl(v_warn_code,999)||'<br>');
22
23        WHEN OTHERS THEN
24           dbms_output.put_line('ERROR= OTHERS: v_pt = '||v_pt||' v_warn_code = '||nvl(v_warn_co
de,999));
25           dbms_output.put_line('Sqlcode ='||SQLCODE||': sqlerrm = '||SQLERRM(SQLCODE));
26 END;
27 /
ERROR= OTHERS: v_pt = 1 v_warn_code = 999
Sqlcode =-6502: sqlerrm = ORA-06502: PL/SQL: numeric or value error
PL/SQL procedure successfully completed.
ORASSO> Does anyone know what is the problem here and what mistake am I making here. and what is the fix for it?
It is URGENT guys. thank you very much for your time and any helpful hints.
syed

Check the specification / declarion of the called procedure. you might have defined any variable improperly. For Ex : v_num NUMBER(3) := 9999999;
- Jaheer

[Urgent] Problem with Itunes 9.2 on Vista 64-bit

Hello,
I have an urgent problem that I hope to get some response and insight from anybody, desperately needing help. As some might know, the new OS for iphone and ipod touch is out. iOs 4 and I wanted to upgrade my itunes, but i had to upgrade it to the itunes 9.2 version. As i was upgrading and installing, this error message : "There is a problem with this Windows Installer package A problem required for the install to complete could not be run. Contact your support personnel or package vendor" came up and ruined the installation and as of now, I am unable to open my Itunes and sync stuff in. This is urgent as I have a ton of stuff inside and now i cant use itunes ! please help !
Im on a version of Windows Vista SP 2 64-bit OS, if that's any info tht will help ! Any help is greatly appreciated here (:

any fixes ? ):

Extremely annoying problem with user folder name in windows 8.1

Here is the thing:
Friend of mine bought the laptop (very strong and expensive asus - republic of gamers) with installed windows 8.1 on it, but after a few days only I bought that computer from him because he didn't need it and he didn't use it at all!
But, his name stayed in the windows. I changed all user accounts names and everything which was possible to be changed, but when i go to C/users his name is still there on folder!
I can say it is very annoying because that laptop cost almost 3.000 USD and I still need to look at someone else's name in my user folder!
I tried to change "ProfileImagePath" in: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ .... but after that windows logged in as a temporary profile and I spend another hour to figure out
how to reverse the thing!
How is possible that some so basic and simple things can't be changed at all in newest windows??? Only because some name was entered first it's not possible to be changed ever again???? Seriously?
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
I am extremely unhappy and upset with this operative system! I,m cursing the day when i gave so much money for computer with crap called windows 8.1!!!!
Very very angry!!!
(P.S English is not my native language)

Hi,
According to your description, it seems that you have resolve that issue.
Not only this problem, there is too many problems with this windows 8.1! Too many! You definitely made the worst thing ever!
Please let us know what problem did you encounter? Please give us more detailed information in order to provide the further help.
Here is a overall guide for you to know well the Windows 8.1
Windows 8.1: frequently asked questions
No Karen, I didn't resolve the issue.
I asked very simple question how to change something so basic like user folder name in Windows 8.1
You know: "C:/Users/"user name"
All the links you are giving to me doesn't provide any concrete answer to this question. I spent hours and hours googling and researching about this question and only solution which i found is that i need to create completely new user account and delete completely
the old one, just to be able to remove an old name of user folder! Are you kidding me?
How is possible that such a basic thing is so complicated?
Is there any way to change folder user name in any other way because i don't want to create a new user account!
Simple question, but, like always, no any concrete answers - just some empty talks, and totally useless links and SPINNING IN THE CIRCLE all the time without the CONCRETE solution.
As for part of my post which you quoted, and your request for more informations in order to provide me further help, i just gave it to you again. I want to change user folder name. What you don't understand in that question?
UPDATE:
Ok, i came back to edit this post because i have a feeling that maybe you don't understand the question and giving me this link because maybe you simply don't know that when you go to:
Control panel/user accounts/change your account name... and change the name, and after that, when you go to C:/users, the folder with the user name still have an old user name. Which means that any changes in control panel or anywhere else doesn't make any
changes on C:/users/ folder itself!!!!!
In previous windows versions was possible to change it by editing "ProfileImagePath" in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ ....
But when I try to do that in Windows 8.1, when I reboot computer it logs in with some temporary account, so i need to reverse everything to be able to use computer with the real account!
So basically it seems that is absolutely impossible to change user folder name in Windows 8.1, which is simply unbelievable!
I really think i explained very good now.

Problem with NFSv4 Domain name

Hi,
I am creating zones for the first time.
I am having problem with the NFSv4 domain name prompt.
I followed the instructions described in
http://opensolaris.org/os/community/zones/faq/#cfg_sysidcfg
After the installation of the zone, on zonepath/root/etc, I created a sysidcfg file and did
touch *.*NFS4inst_state.domain
Booted the zone and logged in to the zone console.
The sysidcfg worked as expected but the NFSv4 prompt didn't go away:
─ NFSv4 Domain Name ────────────────────────────────────────────────────────────
NFS version 4 uses a domain name that is automatically derived from the
system's naming services. The derived domain name is sufficient for most
configurations. In a few cases, mounts that cross domain boundaries might
cause files to appear to be owned by "nobody" due to the lack of a common
domain name.
The current NFSv4 default domain is: "xx.xx.xx"
      NFSv4 Domain Configuration
      ──────────────────────────────────────────────
      [X] Use the NFSv4 domain derived by the system
      [ ] Specify a different NFSv4 domain
────────────────────────────────────────────────────────────────────────────────
    F2_Continue    F6_HelpWhat is missing?
I am running
$ more /etc/release
                       Solaris 10 11/06 s10s_u3wos_10 SPARC
           Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                           Assembled 14 November 2006
$Thanks in advance

Hi
Can you please confirm that there is no “Create A records” option under “More Actions” ?

Urgent : Problem with Client when OC4J has been setup in 2 way SSL mode

This is the output that is generated in the JDeveloper console on running the example from b14429.pdf. Examle :
====================================================
import HTTPClient.HTTPConnection;
import HTTPClient.HTTPResponse;
import javax.security.cert.X509Certificate;
import oracle.security.ssl.OracleSSLCredential;
import java.io.IOException;
import javax.net.ssl.SSLPeerUnverifiedException;
public class SSLSocketClientWithClientAuth {
public static void main(String[] args) {
if (args.length < 4) {
System.out.println("Usage: java HTTPSConnectionTest [host] [port] " +
"[wallet] [password]");
System.exit(-1);
String hostname = args[0].toLowerCase();
int port = Integer.decode(args[1]).intValue();
String walletPath = args[2];
String password = args[3];
HTTPConnection httpsConnection = null;
OracleSSLCredential credential = null;
try {
httpsConnection = new HTTPConnection("https", hostname, port);
} catch (IOException e) {
System.out.println("HTTPS Protocol not supported");
System.exit(-1);
try {
credential = new OracleSSLCredential();
credential.setWallet(walletPath, password);
} catch (IOException e) {
System.out.println("Could not open wallet");
System.exit(-1);
httpsConnection.setSSLEnabledCipherSuites(new String[]{"SSL_RSA_WITH_3DES_EDE_CBC_SHA"});
httpsConnection.setSSLCredential(credential);
try {
httpsConnection.connect();
} catch (IOException e) {
System.out.println("Could not establish connection");
e.printStackTrace();
System.exit(-1);
// X509Certificate x509 = new X509Certificate();
//javax.servlet.request.
X509Certificate[] peerCerts = null;
try {
peerCerts =
(httpsConnection.getSSLSession()).getPeerCertificateChain();
} catch (javax.net.ssl.SSLPeerUnverifiedException e) {
System.err.println("Unable to obtain peer credentials");
e.printStackTrace();
System.exit(-1);
String peerCertDN =
peerCerts[peerCerts.length - 1].getSubjectDN().getName();
peerCertDN = peerCertDN.toLowerCase();
if (peerCertDN.lastIndexOf("cn=" + hostname) == -1) {
System.out.println("Certificate for " + hostname +
" is issued to " + peerCertDN);
System.out.println("Aborting connection");
System.exit(-1);
try {
HTTPResponse rsp = httpsConnection.Get("/");
System.out.println("Server Response: ");
System.out.println(rsp);
} catch (Exception e) {
System.out.println("Exception occured during Get");
e.printStackTrace();
System.exit(-1);
================================================================
C:\j2sdk1.4.2_09\bin\javaw.exe -client -classpath "D:\eclipse\workspace\OC4JClient\OC4JClient\classes;D:\eclipse\workspace\jdev\extensions\.jar;C:\Documents and Settings\nilesh_bafna\Desktop\Nitin\lib\jssl-1_1.jar;E:\product\10.1.3.1\OracleAS_1\j2ee\home\lib\http_client.jar;E:\product\10.1.3.1\OracleAS_1\jlib\javax-ssl-1_1.jar" -Djava.protocol.handler.pkgs=HTTPClient -Djavax.net.debug=ssl -Djavax.net.ssl.keyStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.keyStorePassword=welcome1 -Djavax.net.ssl.trustStore=F:/oc4jcert/client.keystore -Djavax.net.ssl.trustStorePassword=welcome1 -DOracle.ssl.defaultCipherSuites=SSL_RSA_WITH_RC4_128_MD5 SSLSocketClientWithClientAuth ps4372.persistent.co.in 443 F:/oc4jcert/client.keystore welcome1
keyStore is : F:/oc4jcert/client.keystore
keyStore type is : jks
init keystore
init keymanager of type SunX509
found key for : oracle-client
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
               To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
trustStore is: F:\oc4jcert\client.keystore
trustStore type is : jks
init truststore
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af96be
Valid from Thu Jan 18 21:18:14 GMT+05:30 2007 until Wed Apr 18 21:18:14 GMT+05:30 2007
adding as trusted cert:
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Algorithm: RSA; Serial number: 0x45af95dc
Valid from Thu Jan 18 21:14:28 GMT+05:30 2007 until Wed Apr 18 21:14:28 GMT+05:30 2007
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 41, 212, 166, 48, 109, 77, 185, 232, 204, 95, 158, 141, 60, 96, 196, 172, 49, 19, 49, 22, 222, 234, 47, 76, 27, 130, 5, 176 }
Session ID: {}
Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
Compression Methods: { 0 }
main, WRITE: TLSv1 Handshake, length = 73
main, WRITE: SSLv2 client hello message, length = 98
main, READ: TLSv1 Handshake, length = 839
*** ServerHello, TLSv1
RandomCookie: GMT: 1152299454 bytes = { 206, 186, 162, 116, 179, 72, 44, 198, 189, 25, 70, 227, 170, 235, 83, 186, 152, 49, 194, 222, 248, 3, 191, 170, 248, 95, 134, 35 }
Session ID: {69, 175, 178, 190, 47, 141, 131, 115, 241, 226, 39, 29, 241, 65, 235, 165, 57, 40, 52, 85, 68, 85, 68, 84, 108, 141, 1, 125, 193, 191, 158, 208}
Cipher Suite: SSL_RSA_WITH_RC4_128_MD5
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
** SSL_RSA_WITH_RC4_128_MD5
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
               To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
Found trusted certificate:
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
6f24d75b 96919725 ad6ea93a cab0bd96 a49d2f3c e14f5c09 0e228e36 de64e0f2
f2b82740 1653bdb4 5024d281 21ed8c4c 89bc322b 4dc9ffb2 0e97cd95 16e6fe1e
380340c9 f3c67e2c 18d06461 f4f30eaf 4394716e 7bc66d80 810a9cb5 9c168b36
cdd99919 67074ebc edebf02e ebf0accb 2193bc38 7ae1cdda af5ff300 ed0e7763
Validity: [From: Thu Jan 18 21:14:28 GMT+05:30 2007,
               To: Wed Apr 18 21:14:28 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af95dc]
Algorithm: [MD5withRSA]
Signature:
0000: 05 4E EE 12 5B DD 7F 26 92 37 67 C9 D0 73 46 4D .N..[..&.7g..sFM
0010: 7E A5 1E 67 38 06 D9 5F 9F B7 2F E8 F6 9E BF 88 ...g8.._../.....
0020: 01 31 7D EA 42 5E 4F 9E D7 8F DA 9F 94 A5 EF 47 .1..B^O........G
0030: E3 E9 BA DE 94 15 C6 03 DE C9 C0 7D CE 58 C0 27 .............X.'
0040: 0F 1A 66 EC 73 53 5D 1D DE 7E FA 35 15 E0 2A CC ..f.sS]....5..*.
0050: C9 74 CC 58 E9 B6 2F 68 A0 89 2B F3 E6 61 7D E1 .t.X../h..+..a..
0060: 21 AF BE E8 83 49 B1 BD 36 C5 2D 1B 0D A1 0E 63 !....I..6.-....c
0070: 02 4A 82 71 B0 E1 9C AD 55 67 F9 17 A5 96 18 EB .J.q....Ug......
*** CertificateRequest
Cert Types: RSA, DSS,
Cert Authorities:
<CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US>
*** ServerHelloDone
matching alias: oracle-client
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: SunJSSE RSA public key:
public exponent:
010001
modulus:
87fcc8e9 0ffcef8e 61f3be10 be7c9715 2792849b 3bbdeb1c cc76b337 4b82bbab
86972c63 9af3adfd 35b5df99 9078a0d1 6dc760d8 0549a95a bfa7648a 9eadd326
a6bc4b61 d8f8b42f 44e0b178 ff1dee20 db8406cd d800c26a 9c5a6ed9 4d6f2aef
bc919814 3b46be39 e129280c e83afe12 c9d4e3d7 fb5787b1 d98bed4a 4f0833d5
Validity: [From: Thu Jan 18 21:18:14 GMT+05:30 2007,
               To: Wed Apr 18 21:18:14 GMT+05:30 2007]
Issuer: CN=ps4372.persistent.co.in, OU=Marketing, O=Oracle, L=Atlanta, ST=Georgia, C=US
SerialNumber: [    45af96be]
Algorithm: [MD5withRSA]
Signature:
0000: 41 47 35 41 90 10 E3 77 A7 F3 F5 81 37 49 4F 57 AG5A...w....7IOW
0010: 01 11 82 A2 FB 69 46 E8 18 6C EE 11 23 A6 67 2E .....iF..l..#.g.
0020: 68 4D D6 A6 E7 09 45 24 58 18 9A E5 44 49 10 9B hM....E$X...DI..
0030: F1 EC 99 4A 45 5F A4 4F 71 3F 05 3D 45 29 42 CD ...JE_.Oq?.=E)B.
0040: 11 87 DA 0C AA DC 55 4E CF 22 4A 94 85 CB E5 EB ......UN."J.....
0050: BA E1 10 D2 C8 80 2C 6B 65 94 13 01 1F 6E 18 C3 ......,ke....n..
0060: 87 33 8C 65 C7 03 16 03 24 FB 0D B0 6D D8 E7 AA .3.e....$...m...
0070: A1 A5 48 90 0D D6 8C 47 50 2A AA 7C 7B 14 E5 B7 ..H....GP*......
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
Random Secret: { 3, 1, 236, 206, 185, 158, 75, 201, 230, 16, 170, 40, 193, 70, 188, 134, 36, 134, 14, 20, 191, 121, 246, 8, 7, 2, 137, 66, 166, 10, 185, 246, 104, 154, 27, 82, 161, 133, 11, 130, 11, 130, 71, 84, 155, 165, 239, 227 }
main, WRITE: TLSv1 Handshake, length = 763
SESSION KEYGEN:
PreMaster Secret:
0000: 03 01 EC CE B9 9E 4B C9 E6 10 AA 28 C1 46 BC 86 ......K....(.F..
0010: 24 86 0E 14 BF 79 F6 08 07 02 89 42 A6 0A B9 F6 $....y.....B....
0020: 68 9A 1B 52 A1 85 0B 82 0B 82 47 54 9B A5 EF E3 h..R......GT....
CONNECTION KEYGEN:
Client Nonce:
0000: 45 AF B2 BE 29 D4 A6 30 6D 4D B9 E8 CC 5F 9E 8D E...)..0mM..._..
0010: 3C 60 C4 AC 31 13 31 16 DE EA 2F 4C 1B 82 05 B0 <`..1.1.../L....
Server Nonce:
0000: 45 AF B2 BE CE BA A2 74 B3 48 2C C6 BD 19 46 E3 E......t.H,...F.
0010: AA EB 53 BA 98 31 C2 DE F8 03 BF AA F8 5F 86 23 ..S..1......._.#
Master Secret:
0000: CA 5C BA B3 D0 C9 26 A9 3A 06 08 8F 27 2E CE 17 .\....&.:...'...
0010: 93 98 BC DF EF 78 2A 99 DB 3E 50 3B 01 D1 84 5F .....x*..>P;..._
0020: 28 80 CE 7C 7C C1 12 A4 11 F6 33 9B 2E D9 6F BE (.........3...o.
Client MAC write Secret:
0000: 80 FF CE 99 7C 45 4C D8 60 FA 40 79 A2 A4 36 7C .....EL.`[email protected].
Server MAC write Secret:
0000: 2D F1 A0 A8 ED A1 7B DD 89 A5 01 90 43 BF F1 19 -...........C...
Client write key:
0000: E1 3F 33 54 D3 C5 3A 26 4A 41 65 DA AC 44 3B 28 .?3T..:&JAe..D;(
Server write key:
0000: C5 08 52 AE A9 0A 4F D0 AD 54 49 C6 4E 2F 9C 4E ..R...O..TI.N/.N
... no IV for cipher
JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
*** CertificateVerify
main, WRITE: TLSv1 Handshake, length = 134
main, WRITE: TLSv1 Change Cipher Spec, length = 1
main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
main, SEND TLSv1 ALERT: fatal, description = unexpected_message
main, WRITE: TLSv1 Alert, length = 2
Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
main, called closeSocket()
IOException in getSession(): java.net.SocketException: Software caused connection abort: socket write error
Unable to obtain peer credentials
javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated
     at com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA12275)
     at SSLSocketClientWithClientAuth.main(SSLSocketClientWithClientAuth.java:56)
Process exited with exit code -1.
=====================================================
I think this is the problem with ciphers. So can anybody please help me with this!!!. This is very urgent!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks in advance
Nilesh

Thanks for your prompt reply I was able to make it run. Actually I am using the same keystore and truststore at both the client and the server end. I added those properties in opmn.xml as startup parameters.
I have another query I am using JDev to create a client proxy for my webservice that is deployed in OC4J. I have setup OC4J in 2 way SSL (mutual authentication)
When I invoke my client proxy with these system properties set
System.setProperty("javax.net.ssl.keyStore",keyStore);
System.setProperty("javax.net.ssl.keyStorePassword", keyStorePassword);
System.setProperty("javax.net.ssl.trustStore", trustStore);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.trustStoreType","JKS");
I get an exception in the log.xml which is
<MSG_TEXT>IOException in ServerSocketAcceptHandler$AcceptHandlerHorse:run</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.net.ssl.SSLProtocolException: handshake alert: no_certificate
            at com.sun.net.ssl.internal.ssl.ServerHandshaker.handshakeAlert(ServerHandshaker.java:1031)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1535)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:863)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1025)
            at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1038)
            at oracle.oc4j.network.ServerSocketAcceptHandler.doSSLHandShaking(ServerSocketAcceptHandler.java:250)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:868)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
Isn't setting these properties enough for sending a client certificate. Please help!!!!
Thanks,
Nilesh.

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

Problem with dial out

I have a SPA2002 adapter which I use with an asterisk server. On the asterisk I have configured call forwarding that can be enabled by dialing *21*number#. The problem is that the linksys adapter won't let me dial *21, it immediately gives a busy tone, I guess because it tries to process it as a service itself. How can I configure the adapter to dial out with *21*? I have tried to alter different parameters of the adapter configuration, but without luck.

You're mixing up two things.. there's the asterisk as in one of the button on your phone, and then there's the asterisk as in your PBX.
hwittenb was refering to the button on the phone.. your phone dialplan needs to allow dialling stuff like "*21*" - so if you can post the dialplan on your phone, we can see if it indeed allows that number to be dialled. I'm guessing it doesn't since the call never gets to your PBX.
There are two essential pieces to tracking down a problem with your VoIP equipment:
The configuration of every device involved
SIP protocol traces
And don't forget: there's no such thing as giving too much information when describing a problem.

Problem with image path names

We have a website created in CF4.5 and is hosted on our own server, call it www.oldsite.com A vendor created a new website which is hosted at another location and it uses the same name and the DNS info was updated so this new site has the same name and now runs when our oldsite name is used.
The vendor created a new name - "legacy.oldsite.com" and pointed to our old IP address at our office and serverfor the origonal site. We have lots of customer support info on the old site and wanted customers to be able to find these docnuments. When we type "legacy.oldsite.com" we land on an index.cfm page one folder above the orogional index.cfm rathee rthan the old index.cfm page. I have added a tag to this page to go to the correct index.cfm page. But the problem now is that all the images on the site and the documents are missing or will not download. When I look at the path of these images and documents, some images start with Http://www.oldsite.com/etc" some are "http://legacy.oldsite.com/path" (In this case some folder name is missing in the path so it does not work). So it looks like the path is coded somewhere? I see no other way that the www.oldsite.com path could be read any other way. So does anyone have may ideas where I mightbe able to fix this issue and get the old site to load images and documents?
Thanks
TedT

I never used the compressed folder option nor I'm sure I really understand what this feature is.I can browse "into" an archive, open it like a folder (is this the "compressed folder" feature?). I extracted the sub folder via drag and drop. The extraction was very slow, but it finished. When I tried to delete the folder, there was an error message stating that the content could not be saved to the trash because of long file names.
I repeated the test and initially created that awful long path which WinRAR was using (pdt-2.0.0GA_debugger-5.2.15.v20081217-all-in-one-win32) and extracted the archives content into that folder. This time extraction stopped with error message "0x80010135: path too long".
All if seen so far seems to indicate that there's a max_path problem with Explorer (only x64 version?) and system parts based on it (like wastebasket), not only a problem with WinRAR.
Windows 7 x64 - Gigabyte EP-45-DS3 (Intel P45 chip set), 4GB RAM, ATI 4670

6125 - problem with music file names

Hi everyone,
I bought a Nokia 6125 last week and have a slight problem with the music player if anyone can help please:
The music files that I have transferred to my phone have the correct song and artist name on the memory card in the Gallery, but when I open up Music Player it just displays them as squares. Any ideas on how to solve this please?
Thanks,
Sammy_JJ

Hi,
the problem might occur, because of language versions are different(source and your phone). Or the filename coding is not supported in the phone.

URGENT: Problems with dialing by name

Similar Messages

Maybe you are looking for