Urgent:Profit centre differing from SO to material master

Hi SAP Gurus
May i know where from Profit centre gets populated in the SO(Line item level-A/c assignment Tab-Profit centre field).
To my understanding it gets populated from material master.
But i have a sales order wherein the PC has PC$$$$ but when i checked the material master data ,i could find PC##### in the sales general plant view.
Why it is differing?
What i need to check further?
Regards
Sush
Edited by: Sushma Gopichetty Laxman rao on Oct 8, 2008 3:49 PM

Hello Sushma,
May i know where from Profit centre gets populated in the
SO(Line item level-A/c assignment Tab-Profit centre field).
To my understanding it gets populated from material master.
But i have a sales order wherein the PC has PC$$$$ but when
i checked the material master data ,i could find PC##### in the sales general plant view.
Why it is differing?
What i need to check further?
As you have cited that the profit Center set in Material Master record is different to the value available at Sales Order, please check in following points:-
1:- Check the Change History log of the particular Sales Order.
2:- Check whether there are any User exit being used which is altering the value of Profit Center of the Sales Order with the help of Technical consultant.
Kindly share you observation based upon these above pointers.
Regards,
Sarthak

Similar Messages

UoM is different from UoM in Material Master

Hi CCM experts,
In CCM2.0 , the UoM is showing Internal Unit of measurment and but we normally maintain in MM as Commercial UoM.
Can we synch this UoM with CCM with Commecial UoM.
Because of this Shoppers/Users are confusing while adding Item from the Catalog.
There is no iisue after adding the item.UoM is converting automatically to Commercial unit.
Currently we are transferring records from MM by using custom Interface prog.
Can any body tell me the solution.
Greatly appreciated
CK

Hello,
One solution I would like to suggest:
Create a custom table (Z table) and maintain your Internal Unit of measurment and Commercial UoM.Ask user/shoppers to put Internal Unit of measurment and while run time in the program pick up the Commercial UoM.
Hope this will work.
Best regards,
Vivek

Importance of Profit centre filed for non valuated material

Importance of Profit centre filed for non valuated material material master

Hi
Profit center field in case of non valuated material is useful, only if your consumption a/c is not a cost element. In this case, it takes PC from mat master
Else, if takes PC from the CO object in which the GR is accounted.
However, your screen layout in MM might have defined PC as a mandatory field in MM01.. For this, you need to contact your MM consultant
Ajay M

To override the profit centre derived from account assignments

Hi SAP GURUS
I had assigned a profit centre in 3KEH in ECC6.0 (New G/L is not activated, hence using 3KEH) for a particular G/L account.
But when i do a MIRO, the profit centre is derived from the PM order.
I want the settings in 3KEH to override the Profit centre derived from PM order.
Kindly guide me to overcome the issue.
Regards
R.Karthigayan

Hi,
As you need to only change the profit centre , when you have a PM order in MIRO. Then i would suggest you use a Validation & Subsitution Rules.
Validation should check whether a MIRO has PM order or not, If yes then it should do the PC Change.
Regards,
Siddique

PO Text from R/3 Material Master to Product Master in SRM

Hello Forum,
I want to replicate the PO Text from r/3 material master to Product master in SRM to be seen in commpr01..
I am not sure if this text can be seen in SC even if it is not seen in commpr01..
how can i achive this?
Thanks
Arshad

Hi,
You need to create a customer field or a new text in the documetnos brim at item level and to look for that text of the request through RFC using the badi DOC_CHANNGE.
Rgs,
Pedro Marques

Return PO Price is picked up from MAP of materia master,not from info.recod

User Requirement :
When creating return po ,the price is picked up from MAP of material master ,not from info.record
I wrote a code at PO Enhancement "MM06E005" user exit "EXIT_SAPMM06E_017",but don't change the price ,pls help me check what the problem is ,thanks.
The below is my code.
DATA : M_VERPR LIKE MBEW-VERPR,
       M_PEINH LIKE MBEW-PEINH,
       M_MEINS LIKE MARA-MEINS.
CLEAR :M_VERPR,M_PEINH,M_MEINS.
CHECK SY-TCODE = 'ME21N ' OR   SY-TCODE = 'ME22N' OR   SY-TCODE = 'ME23N' .
IF I_EKKO-BSART = 'ZNB7'.
    LOOP AT TEKPO.
SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                         WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
    SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
    TEKPO-INFNR = ' '.
    TEKPO-NETPR = M_VERPR.
    TEKPO-PEINH = M_PEINH.
    TEKPO-MEINS = M_MEINS.
    TEKPO-BPRME = M_MEINS.
    TEKPO-NETPR = TEKPO-NETPR * I_EKKO-WKURS.
    MODIFY TEKPO TRANSPORTING NETPR PEINH MEINS BPRME NETPR.
    CLEAR TEKPO.
ENDLOOP.

Hi Gunawan,
According your meaning ,I change the logic as following:
IF I_EKKO-BSART = 'ZNB7'.
SELECT SINGLE VERPR PEINH FROM MBEW INTO (M_VERPR,M_PEINH)
                                       WHERE MATNR = I_EKPO-MATNR AND BWKEY = I_EKPO-WERKS.
SELECT SINGLE MEINS FROM MARA INTO M_MEINS WHERE MATNR = I_EKPO-MATNR.
TKOMV-KNUMH = ''.
TKOMV-KAWRT = M_VERPR * I_EKKO-WKURS.
TKOMV-KPEIN = M_PEINH.
TKOMV-KMEIN = M_MEINS.
EndIF.
But the values of the fields are not updated,I need to write the code in EXIT_SAPMM06E_017 of PO Enhancement,may you help me ,thanks.

Messg-AAPO189 :Account object Cost Center differs from that in asset master

At the time of Asset Acquisition in T-Code F-90 using Internal order, the system throws the following error:
Message-AAPO189 :Account object Cost Center differs from that in asset master
But in Asset Master data and Internal Order Master data's Cost Centers are same.
And we are not facing this problem for all Assets (only for few asset class only we are facing this error).
Please guide on this.
Note:
We are not using Joint Venture Accounting.
Regards
JS
Edited by: JS on Aug 12, 2009 7:14 PM

Closed

Maintain Profit Center as mandotary field in Material Master

Dear Experts,
We would like to make Profit Center under Sales: General/Plant view as mandotary field during Material Master creation. Kindly assist me the path that where we can maintain this. Thank you.
rgds,
nantha

Hi,
Go to OMS9, Under Field Selection (Field Selection Group 1) screen tab, double click the material type for which you want Profit center as mandatory field.
Scroll down to Selection Group "48", Select the radio button "Required Entry".
Go to MM01, check under Sales: General/Plant, you will be able to see Profit Center as Mandatory field.
Hope this will help you out.
Regards,
Vijay

Planned delivery time Pickup from inforecord not material master data

Hi,
Currently the delivery dates of the orders are calculated with the delivery time which is marked in MM02. Since the purchasing integrates this information in the info record, we want the delivery date to be calculated with delivery time of the info record instead of calculating it with the data of MM02
Please suggest any config.
Thanks
Shital D

Hi,
Try like this, ME21N, put the vendor, material , plant and other Org elements, hit enter, and check P.O what is the planned delivery time that you are seeing, also is the same PIR also appearing in the P.O when you scroll to the right?
Also note.. that system might be picking 3, maybe saturday and sunday holiday is coming, check that too
Regards
Shailesh
Edited by: Shailesh Rajan on Jul 7, 2011 7:00 PM

Restriction of Profit Centre assignment in Material Master

Hi folks!!
We have been using two different profit centres number ranges in material master, one with only numbers and the other one with alphabet sufix.
Now we want to stop material master creator from assigning profit centre with alphabet sufix in material master.
Please help how to do it

You can try using the Badi
BADI_MATERIAL_REF - Addition of customer-defined default data for material
for writting the logic . You can restric both alpha numeric and numeric also here .
-Hari.

Material Scrapping - Profit Centre

Great Gurus
we have define Profit Centre for each finish material. while scrapping the material . T-Code: MB1A , Movement type : 551 Selecting Cost Centre xxxx. Profit Centre comes automaically. that is Profit Centre for Plant.
Now requirement is how we can configur , while scrapping each material will take its own profit centre .
Regards\Adnan

hi,
Profit centre is defined in the Material master (MM03) costing view as well as in Sales general/plant view...you can see it in the middle of the screen...
And can see the profit centre setting in :
SPRO --> Contolling --> Profit centre accoutning --> Here check all the links...
Regards
Priyanka.P

About profit centers assignment in Material Master

Hi Frnds,
Have a doubt to clarify. As far as assigning the (Cost centers and) Profit Centers in Material Master (MM01/MM02 ) is concerned, when we look at the costing views, there we have an option only to enter a Profit Center and not a Cost Center. Can anyone suggest to me in this regards.
My doubt is: When we purchase a Raw material/ Semi finished (in short any material), it is a cost incurred to produce a Finished product, which means this has to hit some cost center, first.
And above all when a PO etc from MM are made, there the purchasing clerk punches the RELEVANT COST CENTERS, then:
what is the use of defaulting Profit center in the material master,(without actually defaulting both cost and profit centers in costing views of MM).
(ii) when a cost object (profit center) is being defaulted, why not cost center?
Coz, primarily we need to know the cost in purchasing the material, then add up all costs and OH and then arrive at a selling price, thereby arriving at PROFIT which is where profit center is highly useful.
Plz suggest
regards
sandhya

Hi,
To clarify your doubts see my response below:
1) Only Costs can be assigned to Cost Centres. i.e.Balance Sheet items cannot be assigned to Cost Centres.
2) On the other hand Balance Sheet items can be assigned to Profit Centres.
When you purchase a Raw material or Intermediate it is not a Cost at the point of Purchase but it is only a Cost at the time of Consumption, if the same is going to be inventorised. In this case it cannot be assigned to a Cost Centre as the Inventory Account which is a Balance Sheet Account is debited in FI.
Only when the Material is issued to the Production line for manufacture of a Finished product, the Cost centre will be manually assigned. Further, you cannot assign a default Cost Centre to a material , as the material can be issued & consumed by any Cost centre and thus the Cost centre will be assigned at the time of issue.
If you purchase a material and if the same is not going to be inventorised but it is a consumable material, it is assigned to a Cost Centre as the time of purchase and it will be debited to a P&L account in FI. The Cost Centre can be defaulted from the Purchase Requisition or the Purchase Order as the case maybe.
Profit centres are defaulted in the Material master, as we need to generate Profit Centre wise Financial statements and the Inventories need to be posted to Profit Centres to generate Financial statements.
Hope this clarifies your doubts.
Regards,
Assign points if useful.

During F110 run-How to pick profit centre from the Pur.Invoice line item ?

Could anyone please help me with a solution to this problem.
Purchase invoice line items have got profit centre recorded from Material master.
While doing the auto payment run F110, for foreign currency invoices, the exchange rate diff
is posted to a - realised exch rate diff gl a/c.
But there is no cost object attached.
Business wants the system to pick the profit centre from the purchase invoice line item
and put it in the line item record of the exch rate diff account.
Can I do it using OKB9 ? Could someone please explain how to do it.
Thanks

Hi,
With standard SAP this is not possible.may be you have to develop some custom program.
with my experiance,we always post to defualt cost center.
hope this helps you.
Thanks,
Rau

Need Profit centre field as mandatory field in the sales order

Dear All,
Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
My requirement is if profit center data is not maintained/available in the sales order system should give the error message
For this I need Profit center field as mandatory field in the sales order(VA01).
Can you please give possibilities ASAP.
Give the SHD0 maintenance step by step.
Regards,
Murali.

Hi Murali
I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error (GL account error) because of that
Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give Profit centre field and process it (if only a few orders are there)
But if the already created orders are many then from the FI Area you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
Regards
Raja

VL01N - User Exit to substitute Profit Centre value field

Hi Guru,
In the VL01N transaction (Outbound Delivery) I'm looking for a user exit to substitute the Profit Centre derived from a standard procedure by SAP, with another value.
Can you suggest me the user exit normally used to do it?
Thanks

Hi,
User exits for VL01N transaction code
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Regards,
Madhu

Urgent:Profit centre differing from SO to material master

Similar Messages

Maybe you are looking for