Urgent - Stock transfer

We have an issue where a sales order has been created and the stock allocated to that line item has been confirmed to the wrong line item
What we want to do is move the stock from line item 30 to line item 40 , please note line item 30 has been confirmed.
Can anyone one help, this is kind of urgent.
Thank you

hi
u  can  use  TCODE VA02  change   sales  order and  there u  can  mention reason  for  rejection   there  u can  see line  item  30 but  u will  not  get  in  to  delivery 
ok
kishore

Similar Messages

  • URGENT: STOCK TRANSFER PC TO KG

    HI ALL
    I WANT TO TRANSFER STOCK FROM UNRESTRICTED TO SCRAP
    FOR THIS I M USING MATERIAL TO MATERIAL TRANSFER IN MB1B
    BUT THE PROBLEM IS
    WE WANT SCRAP IN KG
    BUT THE UNRESTRICTED STOCK IS IN PCs
    CAN SOMEBODY PROVIDE A SOLUTION???
    PLZ HELP
    ITS VERY URGENT

    Hi,
    First of all, maintain the Material Master for the alternative UOM conversion that you are talking of. Then issue the goods to scrap. Try this first in the test environment and check the material and accounting entries created. Ensure the entries are what you want.
    Reward if useful.
    Regards
    Rajeev

  • Stock transfer PR-URGENT

    Hi
    I have a scenario urgently to be configured for stock transfer from other plant
    Plant1(Receiving plant):
    Proc key- F
    Spl proc key-40 (from plant 2)
    Strategy: MTO
    Plant2(Mfg plant)
    Proc key- 'E'
    Strategy : MTO
    My requirement:
    When i create a SO in plant 1, it creates a PR after MRP and immediately it creates planned order in plant2. But client requirement is that unless they convert PR to PO in plant 1, there should not be any planned order in plant2. Becoz PR they do not consider as a demand.
    Is there any standard config in SAP.
    Edited by: THIAGARAJAN N on Sep 7, 2008 8:32 AM

    Hi TN,
    You have configured the system such that all uncovered demand from plant 1 is sent to plant 2 as a purchase requisition.  This is standard "Best Practice".
    Your clients have told you that they do not want ALL unfulfilled demand to be sent to plant 2; only Purchase order demand.
    You can remove the Special Procurement key from plant 1.
    Run MRP in Plant 1, creating unassigned Purchase requisitions.  When the clients create a Purchase order, they will have to assign Plant 2 as a source.  Next MRP run in Plant 2 will then create a Planned order.
    I should mention that this is not "planning", this is "reacting".  However, if this is what your clients say they need, so be it.
    By the way, for some reason the Forum Editor software did not like the subject of your posting, it kept giving me an error message until I changed it as above.....
    Best Regards,
    DB49

  • Urgent Condition Tab Missing In  Stock Transfer Order

    Hi All ,
                When I a m creating Stock Transfer Order from One Plant In one Company Code to  Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
    How to get the Conditions tab, Do I have to do any Customization ?
    Please suggest me of how to go about .....
    Regards ,
    Sriram.

    Hi Srirama,
    Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
    In that case please proceed with the following configuration.
    This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
    For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
    you must specify the price schema to be used.
    Hope this will solve your problem.
    Regards,
    DilliB

  • Route determination screenshots and stock transfer order urgent

    Hi sd gurus,
    Can any one plz send screen shots of routedetermination abd sto to my mail id
    [email protected]

    There is difference in Stock Transport Order and Sales. In Stock Transfer, Material is being Transfer from one location of the company to another and not sold to Customer. Hence in the case of STO there will be no entry as below:
    Customer A/c Dr
    To Excise Duty Recovery Account
    That will be in case of Sales.
    Regards,
    Rajesh Banka

  • Help for bdc for transfer of asset plant wise stock transfer(urgent)

    hi all,
    if anyone has done BDC for this scenario ie.,
    bdc for transfer of asset plant wise stock transfer
    then plz share its code with me.and if someone has done any modification regarding this scenario then plz let me know that what modification he/she has carried out in this & share the code for the same.
    i will be grateful to u for this and promise that i will give points to all ur effort.
    Thanks & regards
    Sanjeev

    Hi Sanjeev,
    Do a recording for the transaction using SHDB. Once you are done with the recording save the recording into a zprogram. You have the code.
    Regards
    Arun

  • Bdc code for transfer of asset plant wise stock transfer (urgent)

    hi all,
    if anyone has done BDC for this scenario ie.,
    bdc for transfer of asset plant wise stock transfer
    then plz share its code with me.and if someone has done any modification regarding this scenario then plz let me know that what modification he/she has carried out in this & share the code for the same.
    i will be grateful to u for this and promise that i will give points to all ur effort.
    Thanks & regards
    Sanjeev

    Hi Sanjeev,
    Do a recording for the transaction using SHDB. Once you are done with the recording save the recording into a zprogram. You have the code.
    Regards
    Arun

  • Table for  the PO Date and Stock Transfer Order Date of a material no

    Hello Everyone!
    I am having a requirement where I want both the Purchase Order Date and Stock Transfer Order Date of a perticular material no.
    On the basis of difference of these two dates I want to find out the period for which the material was present in supplying plant.
    I am not getting the table through which I can get these two dates for a material.
    Please help me out.
    Its urgent.

    hi,
    see these tables:
         EKKO – Purchase Order Header Table
         EKPO – Purchase Order Item  Table
         EKBE – PO History table.
    reward if its useful

  • While Printing Stock Transfer PO giving error message " Tax code in procedu

    Dear SAP MM Cons,
    I want see the print preview of stock transfer purchase order but i getting following error.
    Tax code in procedure TAXINN is invalid
    Where we need not require to give any tax code in the stock transfer PO. Can any body help me to see the printpreview of STO.
    Reagrds
    Abhishek Tiwari

    Kedarji
    Thank you.Urgent please.
    Regards
    venkat
    Edited by: garapati on Feb 15, 2008 12:06 PM

  • Inter compant stock transfer:

    Dear Guru's,
    I have a problem in configuring inter company postings , so, can i have (one step procedure) stepwise configuration material on the inter company stock transfer.
    It is urgent could yo please reply soon, points will be rewarded.
    Sushil
    [email protected]

    Hi
    STO:
    STO CONFIG:
    The following steps have to be followed in order to configure stock transport order between two plants.
    1. Create a vendor for the Company code of the receiving plant using account group 0007 via T-Code XK01.
    2. In the purchasing data view assign the supplying plant and the schema group
    3. Create customer with the sales area of the vendor.
    4. The shipping conditions, the delivering plant and the transportation zone determine the route in the STO.
    5. In the pricing procedure determination relevant to the STO assign document pricing procedure and customer pricing procedure to get the pricing in the invoice.
    6. Maintain condition records for pricing condition.
    7. Maintain carrier as a partner in the customer master.
    8. In OMGN select the supplying plant and assign the company code and sales area. Similarly select the receiving plant and assign the company code and sales area (The company code to which the plant is assigned to).
    9. Assign the delivery type and checking rule to the document type.
    10. And finally, assign the purchasing document type to the supplying plant and the receiving plant.
    11. Create the STO using T-Code ME 21N and save.
    12. Check for release strategy if any and release using T-Code ME 28.
    13. Create delivery in background using VL10G.
    14. If delivery is created, it is an indication of correct configuration and master data creation.
    Stock transfer between two plants in different company codes is known as inter company stock transfer.
    Material should be maintained in both supplying and receiving plant MM01
    Stock should maintain only in supplying plant MB1C
    Create receiving plant as a customer in supplying plants company code and sales area XD01
    Assign this customer number in receiving plant details OMGN
    Assign supplying sales area in supplying plant details OMGN
    Assign delivery type NB for in combination of supplying/ receiving plants.
    Create STO ME21N
    As it is normal there in the item details we should get shipping date i.e. customer number
    Go for Delivery VL10B
    Shipping point *****
    Select PO go for execute
    then select the delivery then go for delvy ............create delvy,,,, delvy number generated.
    Goods Issue VL02
    Delvy doc **********
    Click on picking
    enter the picking qty
    Click on PGI
    in the mean time check in the PO history you will get the details
    Goods receipt MIGO
    Stock overview the stock will be updated....
    Reward if it helps
    Regards
    Prasanna R

  • Doubt on Stock Transfer

    Hi Experts,
            Please suggest me how to do Stock Transfer Orders Bin to Bin..
              Its very Urgent....
         Thanks in Advance
    Thanks and Regards
    Siri..

    HI Neel
    Stock Catogery : An object that uniquely identifies a warehouse stock of a material, for example, quality inspection stock, returned stock, and so on.
    Material Type:
    A grouping together of materials with the same basic attributes such as raw materials, semifinished products, or finished products.
    All materials must be assigned to a material type which determines:
    Whether the material is intended for a specific purpose such as a configurable material or process material
    Whether the material number can be assigned internally or externally
    The number range from which the material number is drawn
    Which screens appear and in what sequence
    Which user department data you may enter
    What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both
    Movement Type:
    A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
    The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
    Hope the above helps you..
    Bye
    Shu Moh..

  • Stock transfer between two plants in same company code at price

    Hello,
    Hello,
    I have a scenarios. One plant is selling a part to other plant at a margin. Both plants belongs to the same legal entity.
    How can I map this scenario in SAP?
    What will be the cost of my part in these two plants?
    What mechanism I would use to transfer the stock from supplying plant to the buying plant?
    Your urgent reply is appreciated.
    Thanks,

    Prem,
    Yes, for this scenario, you will have to implement EC-PCA. This is different from CO-PA.
    Detailed information can be found in http://help.sap.com/saphelp_erp2005vp/helpdata/en/eb/13759643c411d1896f0000e8322d00/frameset.htm
    The Stock valuation is different from MM and PCA point of view. Stock Transfer within Co Code does not have any effect on the Stock value from MM point of view. The Stock value changes only from the PCA point of view. The solution works the same way with Standard Cost also. Your Standard Cost can remain the same in both the Plants.
    The PCA entries are triggered by the Profit Centre data in Material Master. The Profit Centres should be different for both the Plants.
    Hope this clarifies.
    Thanks

  • Report for Missing qty in stock transfer

    how to Create a Missing Quantity list that gives the difference between sent and received quantities during Stock transfer. and send me tables involved in that, primary keys also

    suppose, if we transfer goods from plant to plant or St loc to st loc with in one plant, if some goods missed due to some problems, i need that info.
    diff beteen sending stock of plant 1 and receiving stock in plant2
    Where can i gte all this fields

  • While doing J1iex In case of Stock Transfer Duty is Getting Inventorised

    Dear Experts,
    In case of stock transfer of capital goods between 2 plants, when we are doing J1IEX (for the receiving plant) and tick the u201Ccalculate excise duties based on ratesu201D, the system copies the credit due amount to inventoried duty.
    Due to this the total duty becomes sum of credit due and inventorised duty.
    Why is the system copying the credit due amount to the inventorised duty in case of stock transfer only
    Edited by: Burzes Batliwalla on Jun 13, 2011 7:17 AM

    I am also checking this out with Burzes .Everything is ok with conditions,if we donot click  "calculate excise duty based on rates" . Nothing is inventorised.
    But problem starts when we tick    "calculate excise duty based on rates"   and duty gets Invetorised.
    which is
    Recalculate Excise Duty
    Recalculates the excise duty on the item.
    Procedure
    Select this indicator if you change any of the excise duty rates in the above fields. Then press Enter.
    The system then recalculates the excise duty amounts accordingly.
    Why is this happening.
    Anyone can send some useful suggestions

  • Error in MIGO durng intra-company stock transfer by STO

    Dear gurus,
    I am facing an error while posting MIGO during intra-company plant to plant STO.
    Settings for STO:
    SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
    Define Shipping Data
    Define/assign Checking rule
    Assign Delivery Type
    Assign Doc type
    I have maintained the following pre-requisite master data
    1. Supplying/Receiving plants are created as customer/vendor master
    2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
    3. Assessable value is entered in J1ID
    Process flow:
    1. ME21n - Create STO (PO type:UB)
    2. VL10B - Create Outbound Delivery
    3. VL02N - PGI
    4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
    5. J1IIN - Post Excise Invoice
    at the receiving Plant
    6. MIGO-Post Goods Receipt.
    After entering the excise invoice and clicking on CHECK buttin in MIGO, the following errors are appearing
    1. Excise Details are not maintained for Vendor .-Message no. 8I565
    2. Maintain Vendor for the excise invoice -Message no. 4F185
    3. Please check excise base for the item is zero ! -Message no. 4F121
    Please reply your valuable suggestions.
    Regards,
    Anbu

    Hi Anbu..
    Post Migo without excise entry and try in J1IG to post the excise invoice.
    In J1iG..enter material doc of GR ,Excise invoice no from Manufac plant,check own plant and
    Click Details to get the excise values as in excise invoice.
    Hope this works !!
    Thanks
    R.Kannan,

Maybe you are looking for