Urxvt won't get transparent with openbox, rgba and xcompmgr

Hello!
Yesterday I had a nice working openbox setup with real transparency in urxvt using
Urxvt*background: rgba:0000/0000/0000/bbbb
in ~/.Xdefaults.
Then I did some fiddling around with vga boot options to get a nicer console, and realized the terminals in openbox was not transparent anymore. I thought of it as a framebuffer issue with the nvidia driver, and set everything back to normal again. That did nothing however, the urxvt was still not transparent.
Reinstalled arch this morning for the sake of it, but I still can't get urxvt transparent with xcompmgr. Compositing seems to work with drop shadows and transset, but not when using rgba for urxvt.
Any ideas what I've done wrong?
My Xorg.0.log shows no errors.

Ah, thank you!
I forgot to change it back after I did some troubleshooting...it's all working now!

Similar Messages

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

General questions on how to get started with Oracle OEPE and databases

My company has a server in the cloud, written using Ruby on Rails. The server is designed to work with a browser, so it communicates via standard HTTP.
The server has an SQL database.
The server sends and receives HTTP requests from clients, which are then used to either update the database or retrieve information from the database.
The database can be edited from a separate admin dashboard.
I have recently rewritten our client software as a native android app. The new app makes calls to the server that look like browser calls. I have used Eclipse to develop the Android app.
Sounds pretty standard so far, right? :-)
I now want to replace the Ruby on Rails server with a new Java server that I will write. I want to use Eclipse to develop the new server. During development, I want to be able to have the new Android app communicate with the development server software that will reside on my desktop.
So I was thinking that Oracle's tools might be perfect for me, if only I knew which tools to use. There are lot to choose from. :-)
I believe that all I need is OEPE and a database. I would like to keep it pretty simple. I don't want to learn 20 new tools. It will be enough effort to become proficient in OEPE and a database.
I looked at "Oracle Database Tools >> Connecting to an Oracle database" in the help files for OEPE 12.1.1. I tried going through the help files for Database connections, but I got to a "New Connection Profile" form that asks me for a SID, a user name, a password, etc. I don't have any of those. I tried to enter some data in the forms and ping the database, but I could not get any results from the ping. So my first question is: Do I have to sign up for an Oracle database in the cloud or is there a database contained within the OEPE software that I just installed. I will have to do the former anyway when I eventually deploy my new server software, so maybe the right thing to do is sign up for the "database in the cloud" service now, and use it during development.
The other question I have is about getting a simple application client and server application sample. I found a "hello world" example at http://docs.oracle.com/cd/E13224_01/wlw/docs103/guide/webapplications/workshopJSP/tutorialJSP/TutorialJSPMakeJSP.html, but that is for WLS 10.3 and it doesn't seem to match the 12.1.1 software very well.
So does anybody know where I can find a simple client and server sample program for WLS 12.1.1?
If I can get these two questions answered, I can start making some progress.
Thanks in advance to anybody who can help me navigate this minefield.
Jim

I wanted to add some information to my previous posting.
1. The server I will develop will communicate ONLY with Android and iOS native apps, so the interface will not be HTML or XML. The information sent by the server to the client will be JSON. The information sent by the client to the server will be HTTP parameters, usually in the form of URL-encoded form data. This is not a browser-to-server server interface, so JSP is probably not appropriate for the server. The communication protocol will be HTTP.
2. I don't need anything fancy on the server side. The server will simply be a Java program that emits JSON responses to the client and receives URL-encoded form data from the client. The server program will also make database queries and update the database.
3. I don't understand how my native Android app will be able to communicate with my development server code running on my desktop. I want that communication to be over the internet, but my desktop does not have a static IP address, so I don't see how the app will be able to address the development server software on my desktop PC. I don't want to deploy the server software into the cloud every time I start a debug run, but I don't see any other way for my app to be able to address the server code over the Internet.
If anybody has any ideas, I would appreciate hearing them.

Mac starts up but won't get past the blue screen and the rainbow wheel

I had this problem before a couple of years ago. The hard drive had to be replaced. Now I'm just trying to start it up so I can back up data. I reinstalled OS 10.4 last week, it started OK a couple of times. Now it won't go to the log-in screen again.
I know I can reinstall OS 10 again but isn't there a command key I can hold down while it's starting up that will let me log in?
Also it makes that long BEEP sound when I start it up. What does that mean?
Finally, I do not have an emergency troubleshooting guide. I don't think I ever had one. Can I download a .pdf of that somewhere?

Hi spiffyhere, and a warm welcome to the forums!
I know I can reinstall OS 10 again but isn't there a command key I can hold down while it's starting up that will let me log in?
Possibly...
Mac OS X: What is Safe Boot, Safe Mode...
http://support.apple.com/kb/HT1564
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Option key on bootup will show which devices you can boot from.
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Also it makes that long BEEP sound when I start it up. What does that mean?
Bad sign, and likely the source of the problem...
How many beeps?
Beep_Codes">https://mediawiki.middlebury.edu/wiki/LIS/AppleComputer_BeepCodes
The Beeps may be a Hardware problem, see if this helps...
http://support.apple.com/kb/HT1547

Sorry I do not understand I neeed to get started with elements 10 and so far no help received

I am trying to get started with Adobe elements 10 and selected organise so as to transfer my many files over
this I have been unable to do.
Being asked for ID name ( already registered) which mena scoming out of one page hunting in fact its all very frustrating.. HELP
Post message sorry how do I get help?????????

Hi casheasy!
I sure don't want our first month with you to start off on the wrong foot! I'd be happy to review the charges on your first bill and make sure all is correct. I have followed you in the forums. Please accept my request and follow me back. Then, please send me a DM with your name and mobile number and I'll check it out for you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport

Getting started with aironet 1200 and radius

Hi,
Does anyone has a manual how to configure some aironet 1200 AP's with the use of a radius server?
The best would be a manual from start (reset to factory defaults) to a working solution.
The built-in radius server or a windows 2008r2 radius server are both possible for me.
I have tried both, buth did not succeed. (unknown EAP type and unknown username in the radius log)
Kind regards,
Ernst

i talk with a rep and i heard the new good news...there is no c sharp interface for berkeley db on handheld devices yet, it will be released later.
imagine one having problems executing a simple select statement due to the first release bugs...
dissapointing...
good article rekounas once again, your blog was very helpfull especially on my first steps in the olite universe, please keep it up
Edited by: vasileios on 03-Sep-2010 05:24

My computer, OS Vista 32 bit, clock won't get updated with internet sync system

by the time I use, internet time setting --> update now
I get below errot;
An error occurred while windows was was synchronizing with time.windows.com. I have tried all the options and still get the error.
This has made my computer time wrong.
How can I fix this?

Hi,
Do you need further assistances on this issue by now?
If yes, please feel free to let us know.
Have a nice day!
Amy

Satellite L40 won't shut down with power connected, and won't go in standby

Hi everybody. I hope someone can help me. Basically, there are two problems: one with shutting the laptop (Satellite L40-17U (Vista 32-bit Home Premium SP1) ) down when the power is connected, and one with closing the lid and putting it to sleep.
1. Since a few weeks, it suddenly doesn't want to shut down, whenever the power is connected. When it is on battery, it will shut down. When the power is connected and I try shutting it down, it seems like it shuts down (all activity ceases and the LEDs go off) for about 1 or 2 seconds, and then it goes back on.
2. When I close the lid (all settings in Vista are set to put the laptop in 'sleep' status when the lid is closed) the laptop goes into a state from which it can only be recovered by shutting it down by pressing the on/off button for about 10 seconds to completely shut it down. When closing the lid, only the battery LED keeps blinking orange (the way it should be), but apparently the laptop keeps consuming power, because when I reboot it later (first having to shut it down as described above) the battery tends to be quite a emptier than it was before rebooting it (like going from 100% to 65% in 30 minutes, while being in 'sleep' state). Also, when I open the lid, the other LEDs do go on again (green), but nothing happens.
After rebooting by first pressing the on/off button for 10 seconds to shut it down, I frequently get a message that Windows could not be started, and have to run System Repair.
I've just done a completely clean installation with the product recovery CD (didn't install SP1 yet), upgraded the BIOS to v1.90, but the problem remains.
I'm afraid my only option will be to bring it away for a warranty repair, but knowing that these repairs can take weeks, I'd prefer to try a solution anyone here could recommend me first. If you have any ideas, please let me know.
Thanks,
Daniel Breslauer

Hi guys
Never had such issue on my notebook but regarding to another users here in the forum the BIOS might help to solve such strange notebook behavior
To be honest the shut down issue is not known to me I noticed an standby issue on my notebook but the BIOS update helped.
Therefore I recommend updating the BIOS firstly.
If the issue will still appear, then the ASP should take a look into the notebook.
Good luck

Ipod Touch 5G- WiFi is very slow or won't work, even with 3 bars and stood next to the hub. Is there a problem with iOS 6.0.1? Any one know a way to fix it?

Even with 3 signal bars on a 11mb/s connection. It takes more then 3 mintues to load Google fully!
It works fine loading one page then goes back to being slow or no excitant. It seems to start working again after using speed test.
At first i thought it was the case but after removing it there was no difference
I have tried every thing i could think like:
1. Turing it off and on again
2. A complete restore and backup. (Done this about 3 times)
I'm not sure if the new iOS 6.0.1 up date has caused this as it seemed to work fine for about a week after.
Any help would be appreciated!

I have same problem:
I saw another topic on this but it was a couple of months old. Last month I purchased a ipod touch 5g. It runs great except the speedtest tops out at about .3 mbps down and 5 mbps up. I don't understand what is going on. All my other wifi: Macs, ipod touch 4, ipad 2 & 3, etc work fine and get great speed of 9-15 mbps down and 5 mbps up. I can barely watch an Amazon video. Sometimes it goes fast but that is few and far between. I have tried resetting the network on it. I adusted my router for all the recomendations by Apple.
It was suggested to remove the security on the router just to test it. I did that but it made no difference. This happens whether I'm close (10' or less) or farther away. Is there something I'm missing or do I need to return it?
I keep seeing something about iOS 6.0.2 but my iPod Touch says I'm up to date at 6.0.1
thanks,
Bryce

IPod with dock connector is not getting charged with car charger and iTrip

My iPod from 2003 with dock connector is not getting charged in my car by using the griffin iTrip with USB car charger. iTrip works, but not the charger. Maybe there´s not enough power output from the car charger? Only 5.0V with 400mA are coming out. iPod needs more? 12V with 1.0A?
Does somebody have information about that problem for me?

Has Apple dropped support for older model iPods?
Nope. Support is still there, even back to the original 1G iPod with the wheel that actually turns. I have a 3G iPod, and it syncs just fine. There have not been any software updates for years, but the old software still works fine with the latest iTunes.
You have to use FireWire, which you seem to be doing.
Try putting it into Disk Mode first, then connect it.
http://support.apple.com/kb/HT1363
Does the iPod currently play music as it should?
Do you have another docking cable (FireWire) that you can try? FireWire connectors often get worn and they no longer work, although the power connection can continue to work.
Did you try the other FireWire port in the iMac?

Laptop won't power up with AC adapter and won't charge battery

Here is the thing.
1) the laptop doesn't power on without a battery when directly connected to ac adapter.
2) the light which would indicate that the laptop is plugged into the ac adapter is not on when the ac adapter is plugged in.
3) the battery charge light is also not on, which would indicate the battery is being charged.
The battery does not charge... Laptop turns on the battery backup mode, but not on ac adapter connection. I tried connecting the battery to another compatible hp laptop (both my laptop and the other test device support same battery models). It was charging fine on that laptop. And when switched it back into my laptop, laptop was running fine, but it does not charge in my laptop. But ac adapter is fine too. So whats the issue? And what can I do to get it sorted?
My laptop is not on warranty anymore. But i replaced battery 4 months back, so its not a fault with battery or the ac adapter.
The AC adapter is fine, tested with other laptop.
The battery is also new and works fine
Regards,

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g6-2004tx Notebook and issues with the battery not charging. Here is a link to calibrate and test the Battery. Calibration should eliminate this issue. Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.HP Battery Check in HP System Diagnostics for Windows 8, would give you details of charging and discharging.Testing and Calibrating the battery using HP System Diagnostics in Windows 8. At the starting of the Notebook, Press F2 to select F2 System Diagnostics. Then choose Component Tests, then battery. If the battery was purchased from HP it could be in warranty. Here is a link to check. If purchased from another source you would have to contact them. Hope this helps. Thanks.

Getting started with Server Faces and Data

Hello All,
I am just starting a Java Server Faces project and I am new to the technology and have a couple of questions that I can't seem to find answers to. I am developing using IBM's Rational Software Architect as my IDE and I am creating a Java Server Faces Portlet Application.
I have gone through many tutorials and am getting a good sense of navigation, beans and tags but in all of the tutorials no one has shown a working model of how to grab existing data from a data source and display it on a jsp. From what I have seen the "backing beans" for each jsp page don't seem to have an entry point so I'm a little confuse as to where you would make your call to fill up a bean that is consumed by the jsp.
For example say I have a simple page with 2 labels: one for first name and one for last name, I have created a bean called User with 2 properties (firstname, lastname) each with getters and setters created. Then I have a public method called "GetUser" that returns back an instance of this user bean with some fake data (Is this common practice? I come from a C++/C# background and normally this would be a static method or a method in a controller class somewhere but some of the tutorials I've looked at are doing it this way). Now where does my JSP call this GetUser method? and do I still create a managed bean and bind the firstname/lastname fields to the labels?
If anyone could point me in the right direction, a better tutorial or anything that would be great.
Thanks in advance

Hello!
>
For example say I have a simple page with 2 labels: one for first name and one for last name, I have created a bean called User with 2 properties (firstname, lastname) each with getters and setters created. Then I have a public method called "GetUser" that returns back an instance of this user bean with some fake data (Is this common practice? I come from a C++/C# background and normally this would be a static method or a method in a controller class somewhere but some of the tutorials I've looked at are doing it this way). Now where does my JSP call this GetUser method? and do I still create a managed bean and bind the firstname/lastname fields to the labels?My approach:
package klgr.test;
public class User {
     private String firstName;
     private String lastName;
     public User(String fn, String ln) {
          firstName = fn;
          lastName = ln;
     public String getFirstName() {
          return firstName;
     public void setFirstName(String firstName) {
          this.firstName = firstName;
     public String getLastName() {
          return lastName;
     public void setLastName(String lastName) {
          this.lastName = lastName;
package klgr.test;
* @author klaus
public final class UserBean extends Object {
     User user = null;
     public UserBean() {
          generateDummyUser();
     private void generateDummyUser() {
          user = new User("John", "Doe");
     public User getUser() {
          return user;
     public void setUser(User user) {
          this.user = user;
}And now the JSP:
<%@ page language="java" pageEncoding="ISO-8859-1"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%
String path = request.getContextPath();
String basePath = request.getScheme()+"://"+request.getServerName()+":"+request.getServerPort()+path+"/";
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
     <base href="<%=basePath%>">
     <title>My JSF 'Test.jsp' starting page</title>
     <meta http-equiv="pragma" content="no-cache">
     <meta http-equiv="cache-control" content="no-cache">
     <meta http-equiv="expires" content="0">
     <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
     <meta http-equiv="description" content="This is my page">
     
</head>
<body>
     <f:view>
          <h:outputLabel value="#{UserBean.user.firstName}"/>
          <h:outputLabel value="#{UserBean.user.lastName}"/>
     </f:view>
</body>
</html>Output is:
John DoeUserBean is a managed bean (session scope in that case, but it could also request scope, it doesn't matter here)
If anyone could point me in the right direction, a better tutorial or anything that would be great. Well, as I was learning JSF I found this url very useful:
http://balusc.blogspot.com/
Regards,
Klaus

Getting Started with Business Catalyst and Muse – Creating and Publishing Sites | Introducing Business Catalyst | Adobe TV

Learn how to create your first Business Catalyst site using Muse, then push it live online with just a few clicks.
http://adobe.ly/OU3cnr

I pushed my muse site live to bc and used one of my CC plans. Now i want to upgrade from webbasic plan to get email account with bc. I can't find where to upgrade the plan. Any ideas?

Getting Creative with FrameMaker 1x and Windows 7

For some years I have been treading water with my FrameMaker installation, mainly because of nagging inconsistencies and 'unforeseen consequences' relating to Windows, Acrobat, FrameMaker (and the phases of the moon).
Back in 2009 I updated my workstation to a HP HP xw4600 with a Quad Core, 4GB ram, and 2 x 250GB SATA. I installed Win XP Pro and subsequently patched it to SP-3 with ALL the hotfixes, including 'WindowsXP-KB952909-v2-x86-ENU.exe', which fixes some PDF font issues. Having got FrameMaker 8.0p277 installed along with with Distiller 8.x.x everything more or less worked. Being a careful soul I made sure I used OpenType fonts where possible (Garamond Pro, Minion Pro & Myriad Pro - all licensed). So far, so good.
I got reckless and upgraded to Creative Suite Design Pro 4 with Acrobat Pro 9 and then installed it. Disaster. Acrobat 9.x.x and Distiller 8.x.x don't co-exist. And FrameMaker 8 doesn't particularly want to play with Acrobat/Distiller 9.x.x. Damn!
So, I pulled all the software offa my workstation, reinstalled Creative Suite Design Pro 4 and Acrobat Pro 9 on the xw4600, and installed FrameMaker 8.0p277 and Acrobat Pro 8.x.x on a HP dc7900 SFF that I just happened to have lying around :-). OS as before. Both machines fully patched.
This is not particularly efficient, but everything works. Howsomever, Win XP Pro, though I love it dearly, is slated for the chop in 2014 according to Microsoft. Now I managed to dodge the Vista bullet, but I have to start making plans to migrate to Win 7/8 in an orderly fashion.
Which brings me to Win 7.
Reading the Creative Suite forums suggests that CS 4/5/5.5 has 'issues' with Win 7, especially Win 7 64 bit. But you need 64 bit to use more than 3.46GB of RAM, and RAM is a very important commodity when you're running Photoshop. Very!
Also, FrameMaker 10 was released just before Win 7, and has it's own 'issues' with Win 7 64 bit (see recent posts in the Frame forum).
So, my question is: At what point do Windows 7/8, FrameMaker 10/11, Acrobat Pro X/XI, and Creative Suite 5.5/6 all get together and play reliably without munging fonts or locking up? Is this a pipe-dream, or is there a team at Adobe addressing the really big issue of collaboratively getting your stuff (!) together?
Just asking...

There's a slightly tangent (but still germane) issue about font munging for many "old time" FMers who use older Type1 PS fonts (e.g. Helvetica) and who also happen to have upgraded to Office 2010.
Office apps, especially Outlook and Word, crash when these PS fonts are installed. The event log msg involves "usp10.dll" which is the Uniscribe component that MS uses to render fonts. FM doesn't use Uniscribe, but application crashes involving fonts would always seem to put FM at greater risk, even if only from gobbling RAM or whacking the font cache and thus requiring reboot.
MS finally released a hotfix for this issue, which from my testing seems to have solved the problem.
More info:
http://forums.adobe.com/thread/767210
Sheila

Getting started with understanding when and how to employ Forefront

Hello,
I am a BizSpark member and setting up a team software development environment. It appears I will have to open my Team Foundation Server to the outside for certain aspects.
1) As I have been studying how to set that up I came across Forefront. I don't really know anything about Forefront and I am first wondering if this is something I need to install/engage for my situation.
2) Assuming I need to start working with Forefront I would appreciate recommendations for books/tutorials that can get one up to speed quickly and efficiently.
Thanks.
Best Regards,
Alan

Hi,
if you want to publish internal applications / websites to the Internet you can use Forefront TMG and UAG, but keep in mind that this products has been discontinued:
http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
As a possible alternative you can use the WAP if you don't need all security capabilities of Forefront TMG/UAG
http://technet.microsoft.com/en-us/library/dn280944.aspx
More informations about TMG/UAG:
www.isaserver.org
TMG Online product help
Microsoft Technet websites
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3570

Urxvt won't get transparent with openbox, rgba and xcompmgr

Similar Messages

Maybe you are looking for