US Hosting for dynamic portfolio

I'm wondering about a good host for dynamic content.
I've used Hostway for simple sites but have not used them for
dynamic
stuff. Any opinions?
I'm staying away from Go-Daddy.
Anyone have a list of their top 5?
I'm probably going to use PHP as I am trying to move away
from ASP but
If the company has both ASP and PHP, that might be something
I'd consider.
VPS is probably a good option as long as the pool isn't too
big.
This is all for my brother who recently lost his job in 3D
Architectural/Environmental Rendering.
He has some work posted on Coroflot - See below.
http://www.coroflot.com/public/individual_details.asp?individual_id=237074&c=1&
Oh, and if you have any ideas for work, he's willing to move
almost
anywhere.

My favorite is.
http://www.crystaltech.com/
Dave
"Art" <lee_*[email protected]> wrote in
message
news:gom8vs$ftt$[email protected]..
> I'm wondering about a good host for dynamic content.
>
> I've used Hostway for simple sites but have not used
them for dynamic
> stuff. Any opinions?
>
> I'm staying away from Go-Daddy.
>
> Anyone have a list of their top 5?
>
> I'm probably going to use PHP as I am trying to move
away from ASP but
> If the company has both ASP and PHP, that might be
something I'd consider.
>
> VPS is probably a good option as long as the pool isn't
too big.
>
> This is all for my brother who recently lost his job in
3D
> Architectural/Environmental Rendering.
>
> He has some work posted on Coroflot - See below.
>
http://www.coroflot.com/public/individual_details.asp?individual_id=237074&c=1&
>
> Oh, and if you have any ideas for work, he's willing to
move almost
> anywhere.
>
>

Similar Messages

  • WVC54GC setup Guide for Dynamic IP providers

    Hi,
    after serveral weeks reading various post,  I finally get the solution, works for me,  with dynamic ip providers for D-link DI 524 router.
    I will try   to resume it :
    1- Download latest setup program of the camera from linksys site. The one  provided in the CD  with the camera is not the latest versions, and some times doesn`t  detect the camera when conected to the router.
    2- Conect the camera  to the router  by  the network cable provided. Check if the router led from the port you conected the camera is  on, sometimes the cable provided  is not always ok, I had to change the cable.
    3-When conected, run the set up program  downloaded.
    4- Get to the step where it ask for Dynamic or Static Ip adress.  Mark Static IP adress, and then you have to note the camera IP adress, you will use it later  when configuring port forwarding on your router.
    5- Don´t continue with the setup, just close it. You will enter to the setup program directly entering the ip adress you noted , on internet explorer. Type  the ip adress on the I.E adress, my case: 192.168.0.13
    6- You get in to the  built-in setup program of the camera, tipe  the default user and password admin; admin / you can change it later id you desire)
    7. on the  section setup/basic/configuration type: choose static ip adress. then you have to enter the following info.
    -Ip Adress: your camera ip adress
    -subnet mask: usually 255.255.255.0
    Gateway: your router IP adress , my case 192.168.0.1 , you can check it at the status page entering your router configurations.
    -Primary DNS: same ones that appears on your router  configurations status.
    -Secondary DNS: same as before.
    -SSID: your router identification
    -Network type: set infrastructure.
    -Channel Nº: set to Auto
    -Security:  enter to edit security settings, there  you  choose  your WIFI settings for your router,  security mode ( My case WEP)  TX Key , choose 1; encryption mode  64 or 128 depending on your router configuration; passphrase ( i leave it blank); key 1; enter your  key   you usually use when you conect yo your WIFI network.; Authentification: my case open system
    Note: Always click the aplly button when you  finished to  enter all the info in each screen.
    8- After clicking the aply button on each screen, go to the options section at your left.
    9-There you can active the   movement detection mail, you can do this later, but remember to provide the mail  POP servers and SMTP servers from your network provider if you have a mail from your network provider.
    10- enable UPnp and alternate port
    11-select por number, use higher port number over 20.000 to 60.000 ( some ports are blocked by your network provider)
    that its for configuring the camera, we will return later,  to configure  dydns.org ( dns checker as sololynk but free)
    12- Now  the port forwarding part on your router.
    13- Enter your router configuration, entering on I.E.   ususally 192.168.0.1, enter the  user and passowrd to enter the configuration section.
    14-Go to home on the upper section of the page, then to DHCP  at your left.   enable DHCP server.
    15-starting ip adress set   one different from the one of your router ; ex: my router 192.168.0.1,  starting ip adress 192.168.0.2.
    16- Ending ip adress set  the number you like, my case 192.168.0.20. then I have  from 2 to 20 ip adress thar the router will asigne for differents  elements conected to your network ( PC-Cameras-Notebook-Etc...)
    17-Lease  time: 1 week.  then click apply.
    18- then go to the advanced section on the top of the page, then go to virtual server.  check enabled, Add a name to your camera ( you will use it later for other configurations) and add the ip adress of your camera , my case 192.168.0.13 on private ip.
    19- Add the port yhou choose it  ( the one between 20000 to 60000)  put it on both public and private ports. On protocol type  select  both. on shedule check always. Click apply.
    20-Go to DMZ at your left, and  enter your camera ip to the demilitarized zone, in order to be viewed from the internet.
    Now you have to create an account on http://www.dyndns.com/.  follow the instructions of the site.
    after finishing to register,  create a  host service, follow the instructions. you have to choose a host name  ex.  yourname.dyndns.org
    service type: host with ip adress
    on ip adress  enter your WAN Ip adress form your router   on status page. ( you can also check it on http://www.whatismyip.com/)
    mail routing I leaved it blank in my case.
    save changes, and you are ok, on dynds.  by this site   you will able to access your camera form any part on internet  despite your provider change  the ip adress and dns.
    21- Now return to your router configuration page. Go to DDNS yo your left , there adds the same info from your dyndns account. DDNS  enable, your host name, the provider ( dyndns.org)  , user name and password. then click apply.  You are now ok with router configuration.
    22- Now return to the camera coniguration. Try this in order to check if  it is conected to your wifi network.  unplug  the LAN cable  from the camera to the router,  turn off the camera   by disconecting from power line. wait 5 sec. then  turn on again, an wait until the light stop blinking.  then  from the pc you are connected to the lan,  get in to the camera typing  the camera ip adress, my case 192.168.0.1 on I.E.  then you should enter the setup page. If not,  you have to check  the wifi  configuration of the camera, or  you also should do it  with the setup program you downloaded  but this time use  dynamic ip adress instead of static ( this only for the purpose of getting to the WIFI network, then you have to return to your camera configuration and re-do the static  ip adress process. You don have to do again the  wifi setup   doing it this way)
    23-If you where able to access your camera configuration page  by wifi,  enter to it, and go to setup/sololink  page.
    24- on user name put youor dyndns username; on passowrd same one of dynds site. your domain  enter  yourname.dyndns.org or the one you choose it. The device name,   in my case camera.  WAN port enter  the one you choose it between 20.000 and 60.000. choose a DDNS Service Update: my case  4 hrs.  then don´t click apply, just click update now,  to the right. This is beacuse  the  linkys  don´t allow  other ddns site than sololynk, but this trick  allow to do it.
    you can quit now the configuration page of your camera....
    now in order yo check if everithing is working, you have to  access internet from a PC different from your network,( call a friend or go to a public internet pc) and then  type     on I.E  adress,   yourname.dyndns.org:"port number you choose it 20000-60000)  my case     myname.dyndns.org: 25000
    you may now access the camera throw any part from internet!
    good luck...and patience..

    now that's genius!

  • Variable substitution for Dynamic filename

    Hi All,
    my Scenario is Proxy to file. and the receiver file should be a zip file of extension .dat.gz.
    In mapping I tried as below. In signature I used one sender and two receiver messages.
    SENDER:                         RECEIVER:(2messages)
    MT_Product                       MT_Product
    -----Row                              ---------Row
    ---------field1                         -----------field1
    ---------field2                         -----------field2
    ---------field3                         -----------field3
                                             MT_Poduct_1
                                               --------field5  
    for field5 I mapped current date and I am trying to use it in Reciver file communication channel. will that be correct to use?
    In receiver communication channel the file name is Product_%field5%.zip I used
    and I used Module Configuration for content conversion and Zipping the file.
    In variable substitution I used field5 for dynamic date.
    field5-----------
    payload:Messages,1,Message2,1,MT_Product_1,1,field5,1
    Module Confuguration:
    Guys! am on right path????? will this be possible????

    Hello,
    Why you are using multimapping? Just for defining target file name using var substitution - BTW, that too is incorrect. You cannot use Messages/Message 1 nodes in variable substitution.
    Secondly, if I am not wrong the approach of defining dynamic zip file name using variable substitution won’t work because variable substitution will be executed once all the modules before standard call sap adapter gets executed. So during runtime, at var substitution step, ur file will actually be a text file instead of XML as a result u will get an exception.
    So, if there is no specific objective of using multimapping then simply use DC.
    Thanks
    Amit Srivastava

  • Is there a solution for dynamic reports and using Denes' Export to Excel?

    Oracle 10.2.0.4.0
    Application Express 3.2.1.00.10
    Hello all!
    I am using Denes Kubicek's Export_Excel_Pkg in my application and I'm having trouble exporting reports based on report regions created using a PL/SQL function body returning SQL query. I realize this is not an Oracle supported package, but was hoping someone here could shed some light on it. When I open up the Excel file, I get an error such as: Report Values Error: ORA-06550: line 22, column 5: PL/SQL: ORA-00907: missing right parenthesis.
    I've searched the forum and already have done as others suggested by modifying the REPLACE on the v_sql variable in Export_Excel_Pkg.Get_Usable_SQL, but it did not work. My assumption is that there is an issue with the value being passed to the wwv_flow_utilities.get_binds function. I could not find documentation on this function, but I'm thinking that it cannot extract the bind variables within a PL/SQL block. The report only works when I have just use SQL with bind variables...doesn't work for PL/SQL. Nor does it work for dynamic SQL reports that use a "lexical" parameter (e.g. using WHERE &p_and_condition.) to build the WHERE clause.
    Has anyone come up with a work-around to this? I somehow need to be able to extract reports based on dynamic SQL (or PL/SQL) to Excel.
    Help is appreciated!
    This is my example of a report based on PL/SQL function:
    DECLARE
      v_sql VARCHAR2(4000);
    BEGIN
      v_sql := q'[SELECT UPPER(t1.olo_name) agency_title,
           t1.class_code,
           UPPER(t1.class_title) class_title,
           t1.pay_plan,
           t1.pay_grade_code,
           COUNT(t1.appt_fte) total_employees,
           SUM(t1.appt_fte) filled_fte,
           AVG(DECODE(t2.pay_cycle_code,
                      'UB',((t1.wage_type1_amt_for_pay * 26)/t1.appt_fte),
                      'UM',((t1.wage_type1_amt_for_pay * 12)/t1.appt_fte),
                       0)) avg_annual_rate
       FROM my_schema.table1 t1,
                my_schema.table2 t2,
                my_schema.table3 pro
      WHERE t1.pos_wk = t2.pos_wk
        AND t2.pos_rate_active_flag = 'Y'
        AND t1.ops_ind = 'N'
        AND t1.employee_type IN ('1','2')
        AND pro.ROLE_CODE = :F101_DW_ROLE
        AND pro.pos_role_orgs_active_flag = 'Y']';
      IF :P_MULTI_OLO IS NOT NULL THEN
        v_sql := v_sql || q'[ AND INSTR(':'||']' || v('P_MULTI_OLO') || q'['||':', ':'||t1.olo_code||':') > 0]';     
      END IF;
      v_sql := v_sql || q'[GROUP BY UPPER(t1.olo_name), t1.class_code, UPPER(t1.class_title), t1.pay_plan, t1.pay_grade_code ORDER BY t1.class_code ASC, avg_annual_rate]';
      RETURN v_sql;
    END;This is my example using a SQL statement with a lexical parameter:
    SELECT UPPER(t1.olo_name) agency_title,
           t1.class_code,
           UPPER(t1.class_title) class_title,
           t1.pay_plan,
           t1.pay_grade_code,
           COUNT(t1.appt_fte) total_employees,
           SUM(t1.appt_fte) filled_fte,
           AVG(DECODE(t2.pay_cycle_code,
                      'UB',((t1.wage_type1_amt_for_pay * 26)/t1.appt_fte),
                      'UM',((t1.wage_type1_amt_for_pay * 12)/t1.appt_fte),
                       0)) avg_annual_rate
       FROM my_schema.table1 t1,
                my_schema.table2 t2,
                my_schema.table3 pro
      WHERE t1.pos_wk = t2.pos_wk
        AND t2.pos_rate_active_flag = 'Y'
        AND t1.ops_ind = 'N'
        AND t1.employee_type IN ('1','2')
        AND pro.ROLE_CODE = :F101_DW_ROLE
        AND pro.pos_role_orgs_active_flag = 'Y'
        &P63_AND_CONDITION.
      GROUP BY UPPER(t1.olo_name),
               t1.class_code,
               UPPER(t1.class_title),
               t1.pay_plan,
               t1.pay_grade_code   
    ORDER BY t1.class_code ASC, avg_annual_rateThe *&P63_AND_CONDITION.* value is populated based on a "Before Header" computation under Page Rendering, using the logic below. It is then used by the SQL query defined in the reports region at run time.
    DECLARE
      v_sql VARCHAR2(4000) := NULL;
    BEGIN
      v_sql := ' ';
      IF :P_MULTI_OLO IS NOT NULL THEN
        v_sql := v_sql || q'[ AND INSTR(':'||']' || v('P_MULTI_OLO') || q'['||':', ':' || t1.olo_code || ':') > 0]';     
      END IF;
      RETURN v_sql;
    END;

    Did you get an answer for this?

  • Sum for Dynamic Fields in a Dynamic Table with Field Symbol

    Hi All,
    I currently have an report which I am looking to update with some totals.  The information is currently output in an ALV which is fed data from a dynamic table defined with a field symbol.  The modification that needs to be applied is a summation per currency code where each of the fields to be summed is a dynamically named field at runtime.  I am now just looking to see if anyone has any recommendations on how to obtain these totals it would be appreciated.  I have no problem doing the leg work in piecing the solution together but am just stuck on which approach I should be investigating here.  I have looked into several options but do to the fact that the totals are for dynamic fields in a dynamic table and it is a field symbol I am having some difficulties thinking of the easiest approach to obtain these totals.
    Below is a simple sample of what the report currently looks like and what we are looking to add.
    ====================================================================================
    As-Is Report:
    DETAILED DATA ALV
    Company Code  |  Plant  |  2006 Total  |  2007 Total  |  2008 Total |  CURRENCY
    0001          |   ABCD  |    1,500     |    1,200     |    1,700    |    USD
    0001          |   BCDE   |    2,300     |    4,100     |    3,600    |    GBP
    0003          |   DBCA  |    3,200     |    1,600     |    6,200    |    USD
    Addition 1:
    TOTALS PER CURRENCY
    Currency                |  2006 Total  |  2007 Total  |  2008 Total |
    USD              |    4,700     |    2,800     |    7,900    |
    GBP                       |    2,300     |    4,100     |    3,600    |
    Addition 2:
    CONVERSIONS TO USD
                                          |  2006 Curr   |  2006 USD    |  2008 Curr   |  2006 USD   |
    USD                       |  4,700 USD   |  4,700 USD   |  7,900 USD  |  7,900 USD  |
    GBP   (1.5GBP/1 USD)    |  2,300 GBP   |  1,150 USD   |  2,300 GBP  |  1,800 USD  |
    ====================================================================================
    Any recommendations will be appreciated.

    Hi,
    We cannot use the key word SUM in the loop at assigning statement.
    The way i see is
    When  you are creating the first dynamic internal table , create one more with  the structure below:
    Currency | 2006 Total | 2007 Total | 2008 Total |
    Then while populating the data into first itab,also move the contents to the second itab using collect statement.

  • Error in User defined function for dynamic file naming

    Hi,
    While creating User Defined function with this following code for dynamic fieldname
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return ourSourceFileName;
    which options should i select for cache Value, Context, Queue
    for Augument , what name shd i mention.
    Regards,
    Varun

    Hi Varun,
    I guess I have answered a similar question just a few minutes before on very similar post from you. Just pasting the same here .................
    Are you trying to access the ASMA values from the SOAP header of the XI message for the source file name?
    First of all you need to Set the Sender File Adapter for Set ASMA and then file name. So it will work fine when you actually run the scenario end to end.
    But in the mapping tool when you test the mapping - there is not message header updated with the actual source filename - and whenever you try to read the FileName attribute in the message header from the UDF - it cannot find the object and returns a NullPointerException.
    I would suuggest for your mapping tool testing to be successful, have a check in the java code for null values,
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    If (ourSourceFileName != null)
       Return ourSourceFileName;
    Return "NoFileName.txt";
    Let us know if this works.
    Regards,
    Suddha

  • Start Of Ramp-Up for SAP Portfolio and Project Management 5.0

    Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
    Starting with this new release, the application SAP Portfolio and Project Management 5.0
    replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
    Collaboration Projects (cProjects) application.
    Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
    of ramp-up is currently scheduled for 19th of October, 2010.
    Functional Innovations And New Features
    A detailed description of all new and/or enhanced functional innovations and features can
    be found in the Release Notes:
    [http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
      -> SAP Solutions
        -> Release Notes SAP Portfolio and Project Management
    There are some SAP Notes which are in general very important for SAP Portfolio and Project
    Management 5.0 and which also serve as central points of entry to find import information:
    SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104]      FAQs - SAP Portfolio and Project Management 5.0
    SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912]      PPM 5.0: Supported Browsers, Java versions, etc. 
    SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953]      PPM 5.0: Configuration Content
    SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778]      SAP Portfolio and Project Management 5.0: Restrictions
    Kind regards,
       Florian

    Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
    Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

  • How to define a separate virtual host for each client in SICF

    Hello,
    We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
    1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
    2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
    A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
    After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
    1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
    2. Create a new virtual host in SICF assigning the profile paramter to it
    3. Assign a client to this virtual host
    My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
    Anyone can help me? Thanks a lot in advance!
    Best Regards
    Di Li

    Hi Srikishan,
    thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
    However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
    Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
    Regards
    Di

  • How to define a separate virtual host for each client in ICF for WebDynpro

    Hi,
    We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
    1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
    2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
    A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
    After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
    1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
    2. Create a new virtual host in SICF assigning the profile paramter to it
    3. Assign a client to this virtual host
    My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
    Anyone can help me? Thanks a lot in advance!
    Best Regards
    Di Li

    Hi Srikishan,
    thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
    However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
    Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
    Regards
    Di

  • Using my MacBook Pro as the host for projection to my TV via AppleTV?

    Can I subscribe to HBOGO thru Apple TV and avoid cable service using my MacBook Pro as the host for projecting to my TV via AppleTV?S

    Possibly.
    Some sites such as TMN GO which is similar will not allow mirroring to take place.
    It works for about a minute then shuts down... Security settings from the site.

  • FAGLL03 : Submit syntax for dynamic selections

    Hi Experts,
    My z report contains following fields in selction screen.
    1 . G/ L account
    2. Comapny code
    3. posting date
    4. document type
    5. layout
    In my z report i used following syntax for passing selection screen values to standard program and getting data.
    SUBMIT FAGL_ACCOUNT_ITEMS_GL
                      WITH SD_SAKNR   IN S_SAKNR
                      WITH SD_BUKRS   IN S_BUKRS
                      WITH X_OPSEL    EQ ' '
                      WITH X_CLSEL    EQ ' '
                      WITH X_AISEL    EQ 'X'
                      WITH SO_BUDAT   IN S_BUDAT
                      WITH PA_VARI    EQ P_VAR
                      EXPORTING LIST TO MEMORY
                     AND RETURN. 
    The above syntax is not working for dynamic selection field ( document type ), entire document types data is fetching from standard program. I want to fetch document type data based on my z report selection values for document type field.
    Expect for document type field , submit syntax is working.
    kindly provide submit syntax for my above requirement .
    Any suggestions from experts....
    thanks & regards,
    Hari priya
    Edited by: Hari  Priya on Aug 24, 2009 4:33 PM

    Hi,
    Try like this.
    call function 'RS_REFRESH_FROM_SELECTOPTIONS'
      exporting
        curr_report = 'FAGL_ACCOUNT_ITEMS_GL'
      tables
        selection_table = i_sel[].
    Fill your profit center values in i_sel
    Submit FAGL_ACCOUNT_ITEMS_GL with selection-table i_sel and return
    WITH FREE SELECTIONS TEXPR AND RETURN
    Regards,
    Shamma

  • How to add Document group  in t code S_ALR_87012082 for dynamic selection.

    Hi Gurus,
    I Need to add  Document group  in t code S_ALR_87012082  for dynamic selection.
    Currently here two groups are showing , Vender and Comp Code. i need to add Document group  there. Kindly guide me in this.
    Thanks in advance.

    Hi
    Pls follow below report
    *S_ALR_87012103 - List of Vendor Line Items *
    In dynamic selections you can find Document number, there you can give the range
    Reg
    Vishnu

  • Could anyone provide sample of WebDynpro Java TableFilter for Dynamic Table

    Hi
    I have a dynamic table I have given a context node as a data source and it executes a Web Service and populates itself based on the resultset of query this node contains no of columns and rows
    The table changes dynamically everytime the user selects different table type
    When I created a TableFilter I used IWDTableColumn from the current view and looped though the context elements and binded the values of attributes of each context element to this column inside a loop. TableSort works, But I  am not able to get the Filter working for the Dynamic Table , when I click on Filter Button the Filter does not filterand  just sorts.
    Not sure what is wrong but if someone can give some inputs,leads I will highly appreciate if some one has  a  sample of WebDynpro Java TableFilter for Dynamic Table
    Thanks in advance,
    Ragu.

    Hi Ragu,
    Please check the link for table filtering.
    http://wiki.sdn.sap.com/wiki/display/WDJava/GenericTableFilter+Code
    since your dynamic table uses webservice I assume it has fixed context attributes, just put the filter into wdDoModify method everytime you execute/trigger the webservice.
    Regards,

  • Help required in changing to str for dynamic sql

    Hi
    I am trying to make this to string for dynamic sql, this is a part of the sql which is giving problem with p_..as parameters from proc. Help me in this , iam also seeing dbms _output but stil unable to format it to required error free string.
    || ' AND ( po.abbreviationprojectopportid LIKE '
    || '%'
    || 'NVL'
    || '('
    || p_opp_code
    || ', ''NULL'')'
    || '%'
    || ' OR co.companyname LIKE '
    || '%'
    || 'NVL'
    || '('
    || p_client_name
    || ', '' NULL'')'
    || '%'
    || ' OR le.line_item_amount = NVL '
    || ' ('
    || p_booking_amt
    || ', -0.197) '
    || 'OR po.dealcurrency = NVL '
    || '('
    || p_currency
    || ',''NULL'')'
    || 'OR be.booking_entry_id LIKE '
    || '%'
    || 'NVL ('
    || p_entry_id
    || ',''NULL'')'
    || '%'
    || ' OR le.line_item_id LIKE '
    || '%'
    || 'NVL ('
    || p_line_item
    || ',''null'')'
    || '%'
    || ' OR be.ticket_num LIKE '
    || '%'
    || 'NVL ('
    || p_ticket_num
    || ',''NULL'')'
    || '%'
    || ' OR be.updatedby LIKE '
    || '%'
    || 'NVL ('
    || p_user_name
    || ',''NULL'')'
    || '%'
    || ' OR credittransaction.acct_code ='
    || 'NVL ('
    || p_gl_account
    || ','
    || '-0.197)'
    || 'OR debittransaction.acct_code ='
    || 'NVL ('
    || p_gl_account
    || ', '
    || '-0.197) '
    || 'OR credittransaction.profit_ctr_code ='
    || 'NVL ('
    || p_profit_center
    || ','
    || ' -0.197)'
    || 'OR debittransaction.profit_ctr_code ='
    || 'NVL ('
    || p_profit_center
    || ','
    || '-0.197)'
    || ' OR le.sap_posting = NVL ('
    || p_sap_posting
    || ',''$'')'
    || 'OR cmis.cmis_code = NVL ('
    || p_cmis_nominal
    || ','' -0.197)'
    || 'OR sa.sap_code = NVL ('
    || p_sap_booking_entity
    || ', -0.197)'
    || ' OR (be.booking_date BETWEEN '
    || v_booking_date_from
    || 'AND '
    || v_booking_date_to
    || ')'
    || ' )'
    || 'ORDER BY '
    || p_sort_by
    || ' '
    || p_order;

    some errors.. Try this...
    ' SELECT be.booking_date bookingdate, '
    || ' be.booking_entry_id entryid, le.line_item_id itemid,'
    || ' po.abbreviationprojectopportid opportunitycode,'
    || ' co.companyname clientname, '
    || ' le.line_item_amount bookingamount,'
    || ' be.ticket_num ticketnum, po.dealcurrency currency,'
    || ' cmis.cmis_code cmis_nominal,'
    || ' sa.sap_code sap_booking_entity,'
    || ' (SELECT full_name '
    || ' FROM iba_employee '
    || ' WHERE TO_CHAR (employeeid) = be.updatedby) updatedby,'
    || ' be.updateddate updateddate, '
    || ' (SELECT le.line_item_amount * rate '
    || ' FROM iba_currencyconversion '
    || ' WHERE tocurrencycd = '
    || 'USD'
    || ' AND currencycd = po.dealcurrency '
    || ' AND conversiondate = be.booking_date) amountusd,'
    || 'debittransaction.acct_code debitglaccount,'
    || ' credittransaction.acct_code creditglaccount,'
    || ' debittransaction.profit_ctr_code debitprofitcenter,'
    || ' credittransaction.profit_ctr_code creditprofitcenter,'
    || ' debittransaction.amt debitamount,'
    || ' credittransaction.amt creditamount'
    || ' FROM rb_booking_entry be, '
    || ' rb_line_item le, '
    || ' rb_booking_period bp,'
    || ' rb_cmis_gl_account cmisgl,'
    || ' rb_cmis_account cmis,'
    || ' iba_projectopportunity po,'
    || ' iba_company co,'
    || ' rb_sap_account sa,'
    || ' (SELECT acctr.line_item_id line_item,'
    || ' sapgl_acc.account_code acct_code,'
    || ' acctr.amount amt,'
    || ' sappr.profit_center_code profit_ctr_code'
    || ' FROM rb_account_transaction acctr,'
    || ' rb_sap_profit_center sappr,'
    || ' rb_sap_gl_account sapgl_acc'
    || ' WHERE acctr.profit_center_id = sappr.profit_center_id '
    || ' AND acctr.gl_account_id = sapgl_acc.gl_account_id '
    || ' AND acctr.transaction_type = ''D'') debittransaction,'
    || ' (SELECT acctr.line_item_id line_item,'
    || ' sapgl_acc.account_code acct_code,'
    || ' acctr.amount amt,'
    || ' sappr.profit_center_code profit_ctr_code '
    || ' FROM rb_account_transaction acctr, '
    || ' rb_sap_profit_center sappr, '
    || ' rb_sap_gl_account sapgl_acc '
    || ' WHERE acctr.profit_center_id =sappr.profit_center_id '
    || ' AND acctr.gl_account_id = sapgl_acc.gl_account_id '
    || ' AND acctr.transaction_type = ''C'') credittransaction '
    || ' WHERE po.projectopportunityid = be.projectopportunityid '
    || ' AND be.booking_entry_id = le.booking_entry_id '
    || ' AND po.companyid = co.companyid '
    || ' AND bp.booking_period_id = be.booking_period_id '
    || ' AND cmis.cmis_id = cmisgl.cmis_id '
    || ' AND le.sap_id = sa.sap_id '
    || ' AND le.cmis_id = cmis.cmis_id '
    || ' AND debittransaction.line_item(+) = le.line_item_id '
    || ' AND credittransaction.line_item(+) = le.line_item_id '
    || ' AND ( po.abbreviationprojectopportid LIKE ' || '''%' || NVL(p_opp_code,'NULL') || '%'''
    || ' OR le.line_item_id LIKE '
    || '''%'
    || NVL (
    || p_line_item
    || ,'null')
    || '%'''
    | ' OR le.line_item_amount = '
    ||NVL(|| p_booking_amt, -0.197)
    || ' OR po.dealcurrency ='
    || NVL(p_currency,'NULL')
    || ' OR be.booking_entry_id LIKE '
    || '''%'
    || NVL (p_entry_id,'NULL')
    || '%'''
    || ' OR be.ticket_num LIKE '
    || '''%'
    || NVL (p_ticket_num,'NULL')
    || '%'''
    || ' OR be.updatedby LIKE '
    || '''%'
    || NVL (p_user_name,'NULL')
    || '%'''
    || ' OR credittransaction.acct_code ='
    || NVL (p_gl_account,-0.197)
    || ' OR debittransaction.acct_code ='
    || NVL (p_gl_account,  -0.197)
    || ' OR credittransaction.profit_ctr_code ='
    || NVL (p_profit_center, -0.197)
    || ' OR debittransaction.profit_ctr_code ='
    || NVL (p_profit_center, -0.197)
    || '  OR le.sap_posting = '
    ||NVL (p_sap_posting,'$')
    || ' OR cmis.cmis_code = '
    ||NVL (p_cmis_nominal, -0.197)
    || ' OR sa.sap_code = '
    || NVL (p_sap_booking_entity, -0.197)
    || '  OR (be.booking_date BETWEEN to_date('''
    || v_booking_date_from
    || ''') AND  to_date('''
    || v_booking_date_to
    || ''')'
    || ' OR co.companyname LIKE '
    || '''%'
    || NVL(p_client_name,'NULL')
    || '%'''
    || ' )'
    || 'ORDER BY  ' || p_sort_by || ',' || p_order;                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Flex 4 Web Service Introspection For Dynamic WSDL Locations

    In Flex 3, introspecting a web service resulted in a constructor that allowed the location of the web service to change at runtime.  It appears that the Web Service introspection tool now only allows the single WSDL URI that was specified in the WS Wizard.  It this the case or am I just missing something?
    Flex 3 introspected services would create a service class with the following constructor signatures:
    private var service:MyWebService;
    service= new MyWebService(null, wsdlLocation);  // With parameters
    or you could use:
    service = new MyWebService(); //with no parameters
    In Flex 4, it appears that you can only use:
    service = new MyWebService();
    So if you don't know the web server location until runtime, am I going to need to manually override the instrospected/generated _super_MyWebService.as class in order to get back the ability to point to different servers at runtime?
    Anyone know why this has changed, or what the "new" way the Flash Builder 4 web service introspection tool uses for dynamic servers?
    Thanks a bunch!

    In Flex 4, it appears that you can only use:
    service = new MyWebService();
    add
    service.wsdl = "your wsdl";
    However if you want this to work you have to remove the hardcoded wsdl from the
    superclass otherwise it will not reset it,
    C

Maybe you are looking for