Usage Tracking not showing correct data.

We have configured usage tracking in our project.while creating a report with(Subject Area,Query,Request ) it shows the dashboard filter query of all subject area in a particular subject area.
Eg : If Subjuct area SA1 has a dashboard prompt query "@@@@' ,and Subjuct area SA2 has dashboard prompt query "$$$$$' ,both the querys are shown in Subjuct area SA3 in the usage tracking reports.

Hello,
We implemented usage tracking too
Make sure you are not running into the following BUG pre-10.1.3.4.1:
BUG 7233756 - USAGE TRACKING DOESN'T CAPTURE AD-HOC REPORTS CORRECTLY
We found this issue and verified it was resolved in 10.1.3.4.1.this problem is still there, and we are getting value of random subject are populated for drill down queries. is there any bug for this too?

Similar Messages

  • Usage Tracking not displaying in Data in 11g

    Hi Gurus,
    One of my collegues complained that the Usage Tracking(UT) which is OOTB functionality in 11g does not show any data expect the Time table.
    Is this a bug, as UT is pre-configured in 11g, do we need to do any customization for this to make it work.
    Can please anyone help with the steps to troubleshoot.
    Regards,
    Amit

    Hi A,
    The steps are all done they can see the data in the View Data Section in the Physical Layer, but no data is appearing when they create the Reports in Answers, thats kind of weird was my first expression. I asked them to check the Business Model Diagram but they are of the opinion that as it is OOTB functionaly they did not meddle with the BMM.
    Really critical and need to bring the data in the Answer in 11g, any quick help will be appreciated.
    Rgds,
    Amit

  • Discoverer Viewer not showing correct data when scheduled

    Hi All,
    I have a bit of an ongoing issue and cannot find an answer through Oracle.
    We have an issue that when a cross-tab workbook is run manually in Desktop this returns correct data, when scheduled in desktop it returns correct data in desktop, but when opening the scheduled workbook in viewer, incorrect and irrelevant data is returned
    Here is a little information on the field that is not returning correct data;
    The field is based on a calculation, the calculation (lets call BOB) contains PL/SQL function concatenated with an NVL calculation, this other calculation is a DECODE. I have been playing with changing the content of the BOB calculation, by removing the PL/SQL function and the DECODE calc from BOB and scheduling the report, the data is returned in viewer, in fact i've attempted one without the other and this still does not return the correct data.
    This version of discoverer that is not returning data is V 10.1.2.50.05. I've tested this on a later environment with Discoverer V 10.1.55.26 and the data is returning correctly through the sceduled report in viewer.
    My questions;
    1. Has anyone ever come across something similar to this in version 10.1.2.50.05
    2. Is there any detail available regarding what upgrading to 10.1.55.26 offers?
    3. Know any workaround for using PL/SQL calculations in a scheduled workbook? I am aware that not aggregable items will not be returned in v11 when scheduling workbooks.
    Many thanks in advance for any help.
    Simon

    Bumping this thread
    Thanks
    Si

  • LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

    Hi,
    The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
    Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
    Please let me know if there is any other way to remove the last data fresh without showing the empty space.
    We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
    first(last(<All InfoProviders under Multi - ROLLUPTIME>))
    It uses the earliest rollup time from the last rolluptime of all the base providers.

  • OBIEE Usage Tracking not collecting all data!

    Hi guys
    Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
    Does anybody have a an idea as to what could be wrong here?
    Best regards, Jacob

    Jacob J wrote:
    Hi guys
    Strange problem here. We have set up usage tracking (OBIEE 11.1.1.6) and it is running smoothly, except that we dont get all the data. I have adjusted the field "Query_Text" to contain 4000 bytes, and this also gave us an improvement - it collects more usage tracking. But we aren't getting all the usage stats...
    Does anybody have a an idea as to what could be wrong here?
    Best regards, JacobWhat usage stats are missing? Is there any pattern/behavior where the stats are not being inserted into the tables?

  • Discoverer Report opened from Portal does not show correct data

    Hi,
    When I try to open a Discoverer report from a portal that I created, it shows stale data but when I click on "Analyze", it shows all the data correctly.
    Does anyone know what the reason could be for this?
    Thank you,
    Santoshi

    I assume you used the Discoverer Portlet Provider. A discoverer portlet is never live data. When you define the portlet you specify how often to 'refresh' the data. If you skipped this step, then you just get the data as-of when you created the portlet.
    Generally you specify the refresh time to be sometime after your usual database load completes.

  • Export to PDF from Infoview does not show correct data - CRS 2008

    I have a problem where users attempt to export a report from the Infoview interface to a PDF.  The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values.  To troubleshoot, I have tried this on different clients - without a change in the result.  I have also pulled the latest instance of the report from this history on the Central Management Console.  Interestingly enough, the same thing happens when I export to a PDF from there as well.  Any insight or help would be greatly appreciated.  Thanks!

    Hello,
    I can't tell you offhand on what the issue is here, as various factors come into play.
    Here are a few troubleshooting steps you can try:
    - Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
    - Instead of viewing the report and export; schedule a report to PDF and check the results.
    - there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
    Regards,
    Duncan

  • Hard drive storage issue - "Other" and not showing correct data usage

    I'm currently using a MacBook Pro (Retina 15" Mid 14') which I purchased less than a month ago.
    Based on my "about this mac" storage summary, I'm using over 190GB, yet I can only account 67GB of usage. I've restarted and reindexed my spotlight search twice (once via terminal, next through system preferences).
    Where is all my disc space? What am I missing?

    You might run OmniDiskSweeper and Grand Perspective in Root.  This mat find the discrepancy.
    These are the commands that you will have to enter for each in Terminal
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Naturally you will run one at a time, not simultaneously.
    Look at this as a guide:
    http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space
    Note that when you enter your password, it will not be displayed.
    Before you start any thing, MAKE CERTAIN THAT YOUR DATA IS BACKED UP!
    Ciao.

  • Links in Reports Not Showing Correct Data

    Good Afternoon!
    I've recently found that the links in some reports are not working as they should.  Below is an example from a report I just tried:
    Example
    I ran the report "Count of all instances of specific software registered with Add or Remove Programs" and selected a specific Collection I had created.  The report ran as it should and displayed a list of all software titles and versions for all of
    the collection's workstations combined.
    One application has 5 different versions installed amongst the collection and I need a list of them.  Each of the 5 versions was listed and each had a link.  When clicking on the link, though,
    it showed a list of "all systems" workstations which had the application / version - not just the number of or machines from the collection the report was run on.  Long story short, the report displayed about
    11 machines, but clicking on the link showed a list of about 40.
    I don't know if this is by design, but it's really difficult to work with.  I am having to make individual queries for the data which takes much longer.  Is there a resolution to this?
    Thank You!
    Ben K.

    Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
    Yes this is be design however you can modify the "Computers with specific software registered in Add Remove Programs" report and have it filter on both the SW title and collection.
    http://www.enhansoft.com/

  • Siebel BIP report not show correct data when current view=my programs view

    Dear All,
    I have report that contain field approval,
    which is when i login as 'SASKIA' as example then i want to print report budget request,
    this report contain field approval like :
    Employee Login
    HOKIONO     
    BAMBANG
    PONGKY
    SASKIA
    but when i print the report it just show:
    Employee Login
    SASKIA
    and it happened only if i print report in 'MY Programs' view,
    the report show ok in 'All Programs' view.
    and when checked in siebel tools, IO Program Container(that used in report), the link already set to all.
    Please help me on this.
    Best regards
    Cecilia

    try adding a user property to your integration object:
    User Property Name: "ViewMode"
    User Property Value: "All"
    see if it has any effect - for me it solved some issues with data not being displayed!
    Benny

  • Query on multiprovider not showing correct data

    Hello Gurus,
    I have to display 3 keyfigures in my report.
    Each key fig comes from different data targets.So I have used a multiprovider for it.
    The key figs are namely
    1)Actual sales value 2)forecasted value and 3)Annual target and are in one structure .
    the first and second keyfigure shows data 0calmonth wise(when drill across) which is correct.
    The third key figure should be displayed only at the end .But right now the third key figure column is seen
    in each column when drill down monthwise.
    Is there any way bu which I can only show the values of 'Annual Target'at the end.
    Please suggest on this.

    Hi,
    You can try using Cell Definition in BEX, try to search on SDN and you will find the step by step instructions of doing the same.
    Regards,
    Arminder

  • Table Refresh not showing correct data

    Hi ,
    Jdeveloper version 11.1.2.2.0
    I am facing issue regarding data refresh on table whenever value changes in LOV. Here goes the usecase :
    Please not I m not using ViewLink ( as some constraint in my project.. this is a sample to replicate )
    LOV to select department. - AutoSubmit ( true) . Value change listener code :
    +// Add event code here...+
    +setExpressionValue("#{bindings.DepartmentsEOView1.inputValue}",+
    +valueChangeEvent.getNewValue());+
    +OperationBinding operationBinding =+
    +findOperation("setBindVarForEmployeeVO");+
    +operationBinding.execute();+
    AMImpl method which takes the deptId and executes the Employee. ( This method is the default activity of the taskflow and called whenever the value selected in Department LOV changes)
    +public Integer setBindVarForEmployeeVO(){+
    +Integer deptIdVar = new Integer(-1);+
    +DepartmentsEOViewImpl deptVO = this.getDepartmentsEOView1();+
    +if(!deptVO.isExecuted()){+
    +deptVO.executeQuery();+
    +}+
    +if(deptVO.getCurrentRowIndex()==-1){+
    +deptIdVar = (Integer)deptVO.first().getAttribute("DepartmentId");+
    +}else{+
    +deptIdVar = (Integer)deptVO.getCurrentRow().getAttribute("DepartmentId");+
    +}+
    +this.getEmployeesEOView1().setDepartmentIdVar(deptIdVar);+
    +this.getEmployeesEOView1().executeQuery();+
    +System.out.println("Salary of emp "+ this.getEmployeesEOView1().first().getAttribute("Salary"));+
    +return deptIdVar;+
    +}+
    Editable Table displaying Employees for selected department ( I have a viewCriteria in-memory applied on my VO when exposed in AM ) . Partial Trigger points to LOV .
    I did following on page and not getting expected results :
    1. For Department 340, I changed the salary of the first employee shown from 25000 to 15000.
    2. Selected another department 10 in department LOV.
    3. Reselect the department 340, and ... what I see is salary is 15000. Even though we are re-executing the VO.
    How do i know it is refresh issue :
    In my am method I am printing the salary of the first employee for a department. ... it is getting printed 25000.
    Am i missing something ..
    Sample application ... http://dl.dropbox.com/u/70986236/Question%20Posted%20on%20OTN/TestViewCriteriaMode.zip
    Thanks,
    Rajdeep
    Edited by: Rajdeep on Aug 7, 2012 5:51 PM
    Edited by: Rajdeep on Aug 8, 2012 2:18 AM

    thats wht i am saying.. if you are using an inputText then the refreshed values will not be shown immediately.. it needs an externa laprtial refresh.. ok do one thing. change the salary value in the UI to outputText and see if the value is refreshing or not. if it refreshes then the issue is with the inputText refresh.. otherwise we have to investigate further.. by the way the app that you gave.. was giving some bc4j error.. for which i need time to investigate.. will look into it later..

  • Report License 01A not showing correct data

    I have recently installed SCCM 2007 and have a good number of machines with agents installed.
    When I run the above report, I get no Office 2003 numbers (though, I know it is installed on most of the machines). I instead get Office 2007 listed. Is it possible that SCCM is reading a key that is for 2007 but we have 2003 installed instead?
    Also, in the same report, I am getting 30+ Windows 2008 servers, when we do not have any installed at that location
    Any thoughts?

    Yes, I know this is an old post, I’m trying to clean them up.
    There are a number of Post SP2 AI fixes, I would suggest installed them and seeing if that fixes the problem, if not then you need to contact CSS directly for support as they are the only one that can fix this problem.
    http://www.enhansoft.com/

  • TreeTable node disclosure not showing correct data.

    Hi,
    I have two VOs (parent and child) for the tree table. Created a view link based on a common attribute and displaying it on the UI. The child details are populated dynamically by overriding the getChildRowIterator in ParentVORowImpl.
    When we select a row and disclose the corresponding node, the correct details are being populated. But, if we disclose a parent node without selecting the row, the details of the currently selected row are being displayed instead of the details corresponding to the node disclosed.
    Please let me know if anyone has faced this issue earlier.
    Thanks in advance.

    Hi,
    You can try using Cell Definition in BEX, try to search on SDN and you will find the step by step instructions of doing the same.
    Regards,
    Arminder

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Maybe you are looking for