USB Adaptor for older char

Hi,
I have a new ZEN player. The complete AC adpator is $29.99 plus shipping. All it is, is a 5 volt charger like the one I have for my nomad 2, nomad Zen Xtra and nomad Zen touch plus an USB adaptor. Well, I have lots of the old 5 v 2.4 amp wall chargers, just looking to purchase the little?2 inch adaptor?for cheaper than $30. Does creative sell it separate? Can you give a guy a break that continues to purchase a new mp3 player from creative every couple of years? What would be cool would be to be able to buy it for about $5, so I could get 2 of them, one for home, one for work.

Creative is not known for selling parts that are a component of a product. If you have multiple chargers and are familiar with wiring, you could probably make up your own adapter using an inline jack to connect to the barrel plug from the charger, using a USB mini-B cable.

Similar Messages

I need a wireless usb adaptor for a Power Mac G4... any suggestions? (needs to be compatible)

I need a wireless usb adaptor for a Power Mac G4... any suggestions? (needs to be compatible)

With Mac OS X 10.3 or higher, a number of USB Wi-Fi adapters would be possible to use. However, for an earlier operating system, a wireless Ethernet bridge (such as the examples below) can be a better (and sometimes the only) option. A wireless Ethernet bridge does not normally require special drivers, and can thus be used with almost any Ethernet-equipped computer.
http://www.netgear.com/landing/wnce2001.aspx
http://support.linksys.com/en-us/support/bridges/WET610N
Jan

Can I use a Vodafone USB Dongle with my apple IPad 1st Generation if I have a USB adaptor for my IPad

Hi there just wondering does anyone know if I can use a Vodafone USB Dongle with my apple IPad 1st Generation 16gb (WiFi only) if I have a USB adaptor, will the IPad !st generation support a A Vodafone Dongle(Irish network)

You cannot plug a USB dongle into an iPad using the USB part of the iPad Camera Connection Kit.
The Camera Connection Kit is for connecting cameras - hence the name.
You'd need to get a MiFi device to use 3G data via WiFo on your iPad.

Using usb adaptor for internet ?

I have an MBP now and want to buy a new MBA. I do not have access to wireless. Therefore I have use it with the usb adaptor. Will the MBA run considerably slower via the usb adaptor than than my MBP with ethernet connection? Thanks in adva

I don't think you'll notice the difference depending on what you're doing. You're still limited by your internet download speeds which typically are much slower than any of the link speeds.
If you now have gigabit ethernet than link speed is slower. Somewhere in the 400+ mbs (pulling from my aging memory). If you had 100 mbs ethernet then it's faster.
Regards

USB adaptor for Playbook?

Does anyone know whether it is possible to get an adaptor cable for the Playbook with a fitting on the other end that a USB device could plug into? It is one of THE biggest disadvantges of this tablet (that & the lack of Skype...); I like to take it away with me when I travel, as it's so small, but if for example somebody wants to to give me a file - document, photo etc - this is normally on a USB stick, so it is impossible to ge it onto the Playbook as there's no USB port.
If this doesn't exist then Blackberry should invent something....

www.faceflow.com is the same as skype. Use your bowser. There is a time lag but it does give you video, sound and as a bonus, conference. Both need to be members so you need to ask your friends to join. Same as if you were using skype both need to be members. Its very easy to use. If you use skype then this will work for you.
Someone may have more information about OTG
Regards to all (except BB)

Can anyone recommend a good 802.11n card/usb adaptor for a Windows PC?

I'm about to buy a new iMac and an Airport Extreme Base Station, and I would like my wife's Windows XP PC to be able to take advantage of 802.11n, as the base station will be in the living room and our office room (where the new iMac and the PC live) gets a terrible reception with 802.11g (thick interior walls being the main problem).
I've had a look online at various USB/PCI products, but can any of you recommend one that works particularly well with the Airport Extreme?
Perhaps the Airport Express would be the best solution, as my wife's PC has an ethernet card, plus we also have a USB printer in the office that we'd like to share over the whole house?

I would agree with that, go SATA if you're an island. That's what the majority of my system is set up with.
However, I also have a DSR-11 connected via firewire, and I get firewire drives shipped to me by clients, so I need an additional firewire bus. I bought the cheapest fw400 card I could find, and haven't had any issues yet. I think I spent $35 at CompUSA.
Are there issues that would make me want to buy a better card?

Wi-fi 802.11ac USB adaptor

I bought the Edimax AC450 USB Adaptor for my Macbook Air. There is a utility installed with the adaptor, but this will not open up with Yosemite. I have been able to open it on another Macbook with Mavericks, and it worked. Same problem with other wireless utilities like Railink. I have seen how some instructions can be written in into the system to allow this. Any solutions?

Yes, apparently it is a recognized problem with Yosemite with these wireless utilities. I will check again, though. I am not that much of a geek that I change instructions in the Mac, and I just sent an email to Edimax. Thanks!

USB adaptor problem. HELP!

I have a USB adaptor for the new iPad but when I plug in the USB it says its unable to support because it requires too much power, why? it takes too much power to support, why?

Is it the camera connection kit (with nothing plugged in) that requires too much power, or a USB device plugged into the CCK that requires too much power?
If the former, it's not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0

Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini)

Two questions 1. b/w INK ONLY for 4050 2. USB Adaptor

2 questions
1. INK for 4050 Can I ONLY load and use the black ink cart and print only b/w prints with hp 4050n ?
2. USB Adaptor What adaptor do I need IF ANY to use with my MacBook PRO ?

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Where can I find a driver for STLab USB 2.0 to VGA Adaptor for Macbook Air

Where can I find a driver for STLab, USB 2.0 to VGA Adaptor for Mcbook Air

Thank you for the response.
I downloaded it and it keeps telling me "No Scanner Detected." I looked on their website under supported scanners, found my Microtek ScanMaker 3600 and it says "NO" for Mac.
http://www.hamrick.com/vuescan/microtek_scanmaker_3600.html
I just sent an email to them asking if VueScan does support a my scanner. I hope it does. I have been searching but am not proficient or know enough of what to look for. I just don't want to have to buy another scanner.

I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you

I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you

You need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them. But a lot of USB memory sticks need more power than is supplied to the kit, so you may need a powered hub between it and kit.

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Do I need an AC Adaptor for USB Hub

I have a new iMac 21.5 "with USB 3.0 ports
1. Do I need an AC Adaptor for USB Hub I read that this desktop may not have enough power for bigger items I want to attach 1-2 printers dbl prong DVD drive and some thumb drives
2. do I need usb hub with support for MAC
3. will a USB 2.0 Hub work with a the USB 3.0 port
iMac (21.5-inch, Mid 2014), OS X Yosemite (10.10.1)

1. It depends on whether the devices have their own power supply or get power through the USB bus, as well as how much power they require.
2. See your earlier thread.
3. See your earlier thread.
(119722)

I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

The only way to print from an iPad is to have a printer that supports AirPrint. Here's a link to an Apple support page on AirPrint.
http://support.apple.com/kb/ht4356
AirPrint is way to print wirelessly via Wi-Fi but it requires that the printer supports AirPrint. The iPad cannot use Bluetooth to print and it will not print when connected via USB.

USB Adaptor for older char

Similar Messages

Maybe you are looking for