USB Audio CODEC not being recognised.

Hello,
I have my my Wharfedale 802 mixer plugged into my MAC Mini (late 2012), Processor - 2.5 GHz Intel Core i5, Memory - 4 GB 1600 MHz DDR3, via USB however it is not being recognised as USB audio CODEC what so ever. I have also tried searching for this to set the outputs in Logic and it is not recognised there either.
I have just updated my iOS to Yosemite 10.10.2 and also my Logic X does anybody know why my mac is not recognising my USB audio CODEC for an input or output?
Please help.
Thanks

I just posted this problem I had also. The USB audio Codec is for PPC macs only. I couldnt get a PYLE USB cassette deck to work in AUDACITY because it needed that codec.Windows users use this codec for many devices including the one you are trying to connect.
My post in Snow leopard forum:
I have come to the conclusion that this codec only worked on Macs that used PPC chips,not Intel Macs.Apple must have dropped it when switching to Intel.No where on the net can I find anything about this codec on newer mac OS's and newer Macs.
Judging from this user's comment and others,they are working with OSX10.4 or newer OS that has PPC support like the first Mac Pro and other PPC's.I think the comments below answer my own original question.Hope this helps anyone with the same kind of problem with USB devices that need USB audio CODEC.
In Audacity prefs, I selected:
"USB Audio CODEC" for both Input and playback.
I even tried lower sample rates and such. Record button stays grey and readouts don't show any input whatsoever even though I am sending a signal.
Mac is a 533Ghz g4 (Digitial audio) running 10.4.11
It is plug into a USB port on back of machine.

Similar Messages

USB storage devices not being recognised

Product:
13" Macbook Pro w/ Retina Display (Late 2013 model)
OS X Yosemite (version 10.10.2)
2.4GHz i5, 8gb 1600 MHz DDR3, 256gb HDD
Issue:
- macbook unable to recognise USB storage devices.
- can be found on disk utility but 'greyed out'.
- cannot be found under devices in finder.
- tried restarting laptop, no effect.
- additional storage via Nifty + 64gb micro SD is working fine.
- apple products (iPod/iPhone/iPad) and printer/scanner working fine, only storage devices appear to be affected.
- USB-ethernet adapter appears to be working w/o problems too.
- last technical thing done to the computer was SMC reset 5 days ago for power cable light not working properly (fixed with reset).
Hello everyone,
I seem to having some issues with my macbook and the ability to use USB storage devices. The SD card slot appears to be working fine as I have a nifty device attached on. I'm not sure exactly when this started to happen but it was working last week for sure.
I've put some succinct notes above for anyone who is willing to help out and is able to use it to determine the problem but I don't think it's a hardware issue. Maybe it's a bug with the new OS X update over the weekend?
I've attached a screenshot of the disk utility below as well.
If anyone could help me out then that would be greatly appreciated.
Thanks in advance!

Some users on another Apple thread had success in running Kext Utility last November with similar issues.
I ran kext utility 2.6.1, restarted my computer and everything was working again.

Audio cd not being recognised

On loading an audio CD on my mac,i t says CD blank open finder
However the CD opens on my mac laptop.
What be the solution

Having upgraded to a newer OS X should not haven any effect one way or the other but you should keep your OS X software up to date. The v10.9.4 update is available.
Click the Apple  top left in your screen.
From the drop down menu click: Software Update
Restart your Mac after the updates are installed then try a CD.
If you still have problems, check your settings in System Preferences > CD & DVDs

Secondary graphics card not being recognised.

I just got my laptop back from being repaired, and it seems that, after freshly installing arch, the secondary GPU is not being recognised. I have used lspci and xrandr --listproviders and have come up with only the integrated card. Currently I am running on a samsung series 7 chronos 15.6 inch with the HD intel integrated chipset and a second Raedon HD6490M. Any ideas? Thank you for any help you can give, and I hope my formatting was alright. I am new to the forum.
[fox@Fox ~]$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
[fox@Fox ~]$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 5 associated providers: 0 name:Intel
[fox@Fox ~]$

I went back earlier today and tryed looking into my BIOS and came up with nothing. There, oddly enough, is no setting to enable or disable, or even set some sort of graphics card. I have; however, looked into the problem a bit more and by luck found that others with the same laptop had a sort of similar problem on windows, and they used the SWupdate tool to fix it. I am going to try sometime soon to make a small partition and install windows, and hopefully update the BIOS.

Usb audio codec mono only

I am trying to connect usb record player. Apparently the usb audio codec that loads is mono only and shows up as being used with a usb mike. I am using an HP Touchscreen model IQ526 with Vista 64 bit OS. Is there another driver that can be downloaded or another solution to the problem?? rayful27

But this mic is for Mac too. It's says that you "plug and play". I bought this microphone to record my music work at home.
This is the website, It says that works fine with Garage Band but ...
http://www.samsontech.com/products/productpage.cfm?prodID=1917
*My english is not very good, I'm Spanish.
Thank you!

My iphone 3GS is not being recognised by my PC?

My iphone 3GS is not being recognised by my PC, either in itunes or My Computer as a drive. iPad and iPod work fine.
Phone also not found on other computers I have tried.
Tried resetting the phone. Reloaded iTunes. Stumped now.

Now sorted thanks. It was the cable, seemed identical, would charge the phone through the USB port but did not show up as a drive.

Ipod not being recognised, but with a twist

Hi,
My ipod nano 5th Gen is not being recognised on my computer. It is now being recognised by the computer itself sometimes, but not itunes. However, when I plug my ipod into my partners laptop, its fine. More to the point, when they plug their's into my laptop, it recognises them. To me, this suggests that both my laptop and my ipod, individually at least, are working.
I have been through the ipod support page, and gone through all the steps, and to no avail.
Final details. I'm Windows 8, and my itunes is totally up to date. I have re-installed iTunes, and have reset my ipod to factory settings on another computer. It still doesn't work, please help if you know anything about this!!
Cheers,
Ralf

I have the same issues. itunes 5.0.1.4 doesn't recognize my mini. ipod updater doesn't recognize my mini either. i have uninstalled itunes 5 and reinstalled 4.9, but it didn't work still. something in itunes 5 changed something in my system that reinstalling 4.9 doesn't fix it. updater just shows that i have no ipod connected. if i try to get updater to check for my ipod during the updater installatin, it just sits there and says "waiting for ipod". it's not my usb port because i can read and write to my ipod. i did the entire list of chores that apple suggests on the site including disabling all other functions and services, reinstalling the com port, uninstalling everything, reinstalling everything, getting windows install clean up, e v e r y t h i n g! nothing worked.
I then installed itunes 4.9 and updater 1.4 in my other laptop. i was able to update to firmware 1.4 using that computer. when i put the ipod into that computer w/ itunes 4.9, everything works fine. of course, it asks me if i want to link that laptop w/ my ipod. i said no, because i want to use my original laptop w/ the ipod.
anybody have a solution for this? it's like we all have the same symptoms and going to the same doctor and we end up having to diagnose ourselves. this is extremely annyoying and inefficient.

IPhone 3G not charging and not being recognised by PC

I plugged my iPhone 3G into my laptop today to charge it, as the battery was extremely low and for some reason, it's not being recognised by my computer at all, and it's not charging at all.
I've tried plugging it into a powerpoint in the wall as well, and it still doesn't charge.
I plugged my iPod into my computer with the same USB cable, and it worked fine.
If I hold in the power button at the top, the battery picture comes up with a tiny bit of red in it and the power cable -> charge pictures come up underneath, then the screen just goes black again.
I've never had this problem before, so I'm not sure what to do.
Any help would be greatly appreciated.

I had the same problem after the upgrade, but think I may have a solution. The problem doesn't seem to be that the phone isn't charging, it's that the indicator isn't showing that it has charged. Try this:
1. Plug into the wall socket.
2. Push and hold the power button, you should get a "slide to turn off" kind of message -- do it.
3. Let the phone power off, and leave it that way for a slow count of ten.
4. Turn it back on by pushing and holding the power button -- you'll get that black screen with the apple logo, don't panic, it just takes a minute to power up, you haven't lost anything.
When it came on, the indicator showed it was fully charged from the night before. My concern is that the indicator got hosed by the upgrade.
Try that out, let me know if it works -- and at your own risk. It worked for me as written, but I can't guarantee that will do the trick or not wipe your phone. I don't think so, it seems innocuous enough, just wanted to make sure you're aware there could be another resynch needed if it does do something else for you.

Nokia X6 16GB not being recognised by PC Suite/OVI...

Hi,
I bought my Nokia X6 16GB around november...the phone was working fine and was able to connect to PC as Mass storage device.
2 days back when i tried to connect to OVI suite to download maps...my phone was not being recognised by OVI suite/PC suite. But i can still connect it as Mass Storage Device.
I browsed through other posts...and tried eveyrthing...i.e... I tried uninstalling PC SUITE, OVI SUITE, Connectivity Cable Driver,etc...Removed all entries from registry!....Tried reinstalling again all these to my PC....Reformatted by Mass Storage in the Phone. Tried resetting to factory settings....but no luck!
Also under USB connections in the mobile, i get only 4 options...
1. OVI Suite
2. Mass Storage
3. Image Transfer
4. Media Transfer
I dont see any PC Suite option.
Also whenever i connect the phone to the PC...i get a found new hardware wizard with the following message.
Cannot install this Hardware
There was a problem installing this hardware
Nokia X6-00 USB Phone Parent
An error occurred during the installation of the device.
The system cannot find the file specified.
Nokia Ovi Suite 3.0.0.290
Nokia PC suite 7.1.60.0
PC Connectivity Solution 10.50.2.0
Connectivity Cable Driver 7.1.36.0
Operating system: Microsoft Windows XP 32-bit Edition, Service Pack 2
Pls help at the earliest...really spend a lot of time to fix this issue....my last option is hard reset...which m not eager to do!...is there any other way out?
Attachments:
nokia err msg.JPG ‏30 KB

had this problem after doing a hard reset on my x6, pc suite and ovi suite would not recognise phone.
The solution above worked great although i had to restart the pc after repairing drivers for it to connect.
reason for hard reset was because the screen kept going all washed out/scrambled every now and then tho could get it back to normal after playing with lock button. hard reset did not fix this issue which i am still having.

Ipod nano 3g is not being recognised by my laptop(running win XP sp2) nor it is getting charged by an AC adapter

My i pod nano is not being recognised by the computer(XP SP2) nor it is getting charged by an AC adapter..iTunes does not recognise it.
Used all the troubleshooting tips and enabled disc use too..all these efforts were in vain....Need some quick tips!

Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
Link: http://www.info.apple.com/kbnum/n305136
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

My "iPod Classic (60GB) Click Wheel" is not being recognised in iTunes although the iPod shows up in 'my computer'.

My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'. The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times. I've carried out an error check in the iPod properties. I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?

Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad

My ipod touch 4g is not being recognised on my new toshiba laptop. The ipod touch starts charging then stops. This keeps continuing. Please help.

my ipod touch 4g is not being recognised on my new toshiba laptop or itunes. Its not being shown on my computer and its not shown as 'unspecified' in the 'devices window'. The ipod touch starts charging then stops this keeps continuing like a ongoing circle. Please help.
I have tried on my family members laptop and its seems to be picking up. So the ipod or the usb wire is not the issue.
I have tried everything from reinstalling itunes and updating windows.
I have tried the diagnostics test and its still says the ipod cannot be found.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

My FaceTime camera is not being recognised why? and how can i fix this problem

I had this program called vdcassistant and apparently its a virus so I removed it and now my FaceTime Camera is not being recognised can someone please tell me how to fix this, and i have no time machine back ups

Reinstall Facetime application.
Check system profiler for your inbuilt iSight camera by looking at Hardware > USB > Built in iSight.
Perform an SMC/PRAM reset:
SMC RESET:
Unplug all cables from your machine including the power cable. Hold the POWER button for 10 seconds.
Plug all cables back in and boot machine.
PRAM RESET:
Locate COMMAND+OPTION+P+R Keys.
Turn on the Machine.
Hold down these four keys.
Until you hear the startup sound for a second time.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

Eric,
Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
I'm trying to record the sound from the DVD not rip the track.
When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

USB Audio CODEC not being recognised.

Similar Messages

Maybe you are looking for