USB cable doesn't work

Now the problem is I can't get my iphone 5 being charged using my USB cable linked to computer or to outlet with adpter. My iphone 5 just arrived in a week and the first one or two days it can work but yesterday I find it can't work now. I have tried my iphone 5 using another iphone 5 usb cable, and it can work.

All package contents included with the iPhone purchase are under Apple's standard one year warranty. If you purchased the AppleCare Plus extended warranty package if available in your country, the warranty is good for two years.
Contact AppleCare or make an appointment at an Apple store if there is one nearby to get a replacement cable under warranty.

Similar Messages

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • Hi my iPad 2 charger the one with the USB port and a USB cable doesn't work anymore I've changed fuses even tried a different cable no luck HELP!!!

    HEEEELLLLLPPPP MEEE I'm going crazy!

    Sounds like you need to restore your Apple TV to factory settings.
    See this Apple document:
    http://support.apple.com/kb/HT4367
    You will need to use the "Micro USB Cable" to restore it to factory settings.
    See the article shown above.
    You must unplug the power cord before connecting the ATV to your computer....

  • Upgraded to iOS6 and now charging cable doesn't work

    I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work.  No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer.  If I plug my iPad charger into it, it works fine.  How can the new operating system determine what kind of usb charging cable it "wants" to accept?  This charger and cable worked flawlessly before the OS upgrade.

    Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

  • TA44551 my gen 4 iPod doesn't charge, the usb cable is good(works on other apple products) What should i do?

    my gen 4 iPod doesn't charge, the usb cable is good(works on other apple products) What should i do?

    What normally happens is most people take showers and listen to thier ipods or live around many sources of humidity.  Moisture corrodes the 30 pin connector on the ipod touch.  Clean and inspect the ipod touch's connection pins to resolve most charging/ sync issues.. The pins could also be dirty, bent or broken.  If dirty: Take 91% rubbing alcohol, dip a tooth brush into it, shake the excessive alcohol off leaving the brush damp(don't use to much alcohol, it should not be dripping).  Careful!!! The Pins are Very Fragile! Gently brush the connector pins, long ways, left to right in a few second bursts, inspecting the pins as you go...   If you have an eye loop or magnifying glass you can see inside the connector easily and see if the pins look dirty or bent or broken.  If they are bent you have to VERY GENTLY stand them back up.  If they are bent very far down, chances are you will snap them off trying to straighten them back up.  If they are not severely bent over, use a very small flat head precision screw driver to bend the pin back parallel with the good pins.  Pease note: certain pins are used by the wire for different things such as sync or charging... If your pins are broken off, do a search and find out what the individual pins on the ipod 30 pin connector do to see what is affected.  Worst case is your pins are broken off.  U can attempt to solder the broken pins back on without opening the ipod touch, which is super difficult to do, or you can open the touch and repair/replace to 30 pin connector entirely.  U will need to do some micro soldering to say to least! Don't attempt unless you are confident in your soldering skills and research how to open an ipod touch? You will need some specific tools and watch out for floating LINT!  Get some canned air ;) use a small 1/2 second bursts from 4-6" away because it will steam up you touch if used for to long. Good luck!

  • [SOLVED] External USB mouse doesn't work

    I've installed Arch on my laptop and today faced with a problem. When I boot with AC off my external USB mouse doesn't work. Also it looks like USB ports don't work. If I detached AC when working mouse works fine.
    I can suppose there is some problem with laptop mode. May be it turns off usb ports to save energy. Anyway quick search doesn't brings any results. If someone give me a hint how to solve this problem I'll be very grateful.
    Last edited by avli (2011-07-14 16:53:15)

    Well, after diving into configs solution has been founded. The point was to disable auto suspend feature in laptop-mode-tools config by setting BATT_SUSPEND_USB variable to 0 in /etc/laptop-mode/conf.d/usb-autosuspend.conf
    Hope this information will be helpful for users who probably faced with the same problem. Thank you!

  • If my charging cable doesn't work do i get a new for free

    if my charging cable doesn't work do i get a new for free

    I had a lightning cable, that came with my iPhone 5s, that frayed and broke at the connector.  I took the cable and phone into the Apple Store and they exchanged the cable for a new one with not a question asked.  Good experience.
    I think part of it is that the design of the Apple cables is quite flimsy especially at the connector and I think they see a lot of them fail.

  • Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

    Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

    I am sorry you are having this trouble. 
    Here is an article on troubleshooting calendar syncing with iCloud.  See if the suggestions there are of help.
    http://support.apple.com/kb/TS3999

  • My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

  • I updated to 10.4.7 and now my left USB port doesn't work

    Hi all,
    I ran Software Update just a second ago, installing an update to MacOS (PowerPC), ITunes, and QuickTime. After the install and the restart, my left USB port is no longer working. It was working immediately before the install.
    I have verified that the peripheral that was not working in the left port works just fine in the right one. I have also confirmed that a peripheral that was working previously in the right USB port doesn't work when attached to the left one.
    Therefor, I am led to believe that the problem lies in the left USB port. The only thing that has changed is the updater which ran moments ago, and again, the left USB port was working just fine prior to the install.
    Has anybody else experienced this problem and knows of a fix/patch/anything I can do?
    PowerBook G4 Titanium   Mac OS X (10.4.7)  

    Welcome to the Apple discussions.
    I would reset your power management unit, then install the combo 10.4.7 update. Recently, there have been issues with updates through the software update function.
    Reset the PMU: http://docs.info.apple.com/article.html?artnum=14449
    Download combo 10.4.7: http://www.apple.com/support/downloads/macosxupdate1047comboppc.html

  • VDI 3.1 USB redirection doesn't work

    Guys,
    Having problems with USB Redirection on Windows XP image. I have installed SRWC Components on to the template - I can see utsrSession device, usb redirector icon comes up under system tray too. However, USB sticks doesn't work - checked uttsc logs on solaris box which reported as follows:
    2009.12.01 16:48:39.388565 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
    2009.12.01 16:48:39.388612 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
    2009.12.01 16:48:39.388649 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
    2009.12.01 16:48:39.388678 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
    2009.12.01 16:48:39.388705 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
    2009.12.01 16:48:39.388720 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
    2009.12.01 16:48:39.388741 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
    2009.12.01 16:48:39.388757 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
    2009.12.01 16:48:39.388804 EST fill_devinfo: term key not found
    2009.12.01 16:49:03.559301 EST ut_usb_start: Starting usb: with debug_level: 1
    2009.12.01 16:49:03.560447 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
    2009.12.01 16:49:03.560726 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
    2009.12.01 16:49:03.560747 EST unit_event[term=IEEE802.00144fd6e070]: Device not found.
    2009.12.01 16:49:03.560798 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
    Got customer to uninstall the SRWC components package and asked him to install just the USB Redirector (the one from the VDI 3.1 EA release).
    uttsc logs now reporting that disks are OK.
    bash-3.00# tail -f /var/opt/SUNWut/log/utstoraged.log
    2009.11.30 16:46:03.610295 EST service END lun=0, ctlmin=1, uid=150000, xid=2
    2009.11.30 16:46:14.549090 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
    2009.11.30 16:49:59.835905 EST service END lun=0, ctlmin=1, uid=150000, xid=2
    2009.11.30 16:50:08.666330 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
    2009.11.30 16:52:08.312175 EST service END lun=0, ctlmin=1, uid=150000, xid=2
    2009.12.01 16:49:28.440061 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/V68_____USB_2.0_________, lun=0, ctlmin=1, uid=150002, xid=3
    2009.12.01 16:50:35.108629 EST service END lun=0, ctlmin=1, uid=150002, xid=3
    Looks like this time it is seeing the disk correctly..still no USB device shown under My Computer !! Any thoughts??
    Regards,
    Hardik

    Forgot to update the Forum.
    Latest firmware did resolve the issue !!
    Thanks & Regards.

  • My Lightning to USB Cables can not work

    Hi,
    I brought an Ipad Air about 2 weeks ago. And today only to find the Lightning to USB Cables can not work. Can I get help from you?

    I can't help you, but if your cables don't work, you can visit your local Apple Store, and they'll likely give you free replacements. (That happened with my iPad Mini.)

  • After the OS X Lion installation, my USB modem doesn't work. I already updated the USB drivers, but nothing happened. Any suggestion?

    After the OS X Lion installation, my USB modem doesn't work. I already updated the USB drivers, but nothing happened. Any suggestion?

    You might want to do a search here on the forums re. usb modems - I've seen several threads and the opinion appears to be that faxing is no longer supported (especially since the "Fax" is now missing from the Print Preference Pane in System Preferences). I am faxing with an all-in-one printer which is connected to a landline, but I have to use the printer's control panel - can't use it from the iMac.

  • 30-pin cable doesn't work in battery charing

    I have bought an official cable and a unofficial cable and I am iphone 4 user. I can't charge my phone with both cable. This is iOS 7 and I restored so many times. Can you tell me how to fix the problem?

    Ok, Is your computer on? If so try putting it in a different USB port. If that doesn't help, try cleaning this part. If that doesn't work, Your battery may be fried.

  • 40GB iPod Photo came with FW cable, doesn't work with FW cable

    I have a 40GB iPod photo that I love. I bought another (used) one for my wife, being careful to get the identical model so we could share things such as docks, cables, etc.
    Her iPod works fine with the USB cable, but will only charge with the FW cable -- no computer can see her iPod through FW. I've reset the iPod, updated it with the iPod updater, but nothing. When I connect her iPod to any of my Macs (her 12" iBook, my 12" PowerBook, my G5 iMac) with FW, the iPod appears to be charging, but is not detected by the computer, nor are any of the iPod controls usable. It doesn't go to the "do not disconnect" screen, but simply freezes where it is until the FW cable is disconnected.
    Specifics: both iPod Photos are the 40GB model M9585LL, version 1.2.1. The 2nd one CAME WITH a FW cable, which is why I'm puzzled that it won't work with it. Help?

    Here is some info for the pinout for the iPod.
    http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
    You need to find the pinout of the camera cable you have.
    Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
    Usually, you simply have to swap the Red and the Yellow for it to work properly.

Maybe you are looking for