USB Controller

I've just bought myself a copy of ezdrummer with the DFH expansion pack but need to get myself a usb controller.
From your experiances, is drum triggering better with a specific drum trigger device such as M-audio's Trigger Finger (or something similar) or just go for a usb keyboard?
I know most keyboards are velocity sensitive now but would a synth action/semi weighted action be more velocity sensitive?
I've borrowed a friends M-audio Oxygen8 keyboard to try out but i'm finding it quite hard to get any subtle hits.
Any advice is welcome
Many thanks

Install the Realtek media card reader driver software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140783-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
Please help? Anyone...!
Thank you!
This question was solved.
View Solution.

Hi,
Try installing the USB 3.0 driver on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Pavilion 15-n261nr windows 7 64 bit usb controller driver

I see to not be able to find the correct driver for the usb controller. The hardware for it is called PCI\VEN_8086&DEV_9C31&SUBSYS_2163103C&REV_04

Please use HP provided Intel USB 3.0 Host Controller Driver or Intel provided USB 3.0 Driver: Intel® USB 3.0 eXtensible Host Controller Driver for Intel® 8 Series/C220 Chipset Fa....
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Pavilion G6 2230SA Windows 7 64 bit \usb \controller driver

Hi - I'm attempting to install Windows 7 (64Bit) on a HP Pavilion G6 2230SA Notebook which was originally delivered with Windows 8. I appreciate that this is not supported by HP but am simply hoping that someone could help me install the correct drivers which I'm missing? These are:
PCI Device
SM Bus Controller
Universal Serial Bus (USB) Controller
Any help that anyone can offer would be hugely appreciated!
This question was solved.
View Solution.

Hi:
You need these drivers...
SMBus Controller:
Download, unzip and manually install the smbus controller driver I attached under Attachments below.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
USB3: Install both of these and reboot.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&...
PCI Device:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103762-1&cc=us&dlc=en&lc=en...
Attachments:
sp66185.zip ‏7 KB

Very slow boot due to USB controller?

Hi all,
I bought your barebone MS-6251 with combo DVD-RW. (other params are pentium IV 2.8 GHz, 512 MB RAM, 120 GB HDD Seagate, NVIDIA GeForce FX 5200 Ultra). I already installed your LiveUpdate software.
I was absolutely satisfied with this product untill this monday (or tuesday) when my computer suddenly crashed. From that time I was not able to boot it again up, it froze after login dialog of Windows completely.
I reinstalled windows again and I was succesful and now I am working on the computer but I have following problems:
1. I am not able to install in windows FRONT PANEL with card readers?
2. During start up of Windows, they seems to stop for 1 minute - black screen, HDD not operating, after this long 1 minute start up process continues normally.
3. I noticed that it is somehow connected with USB controller - when I switch it off in BIOS, everything runs quickly - of course without USB support. Immediately as I switch it on, there is this huge delay during start up.BUT THIS WAS NOT BEFORE - BEFORE CRASH MY WINDOWS STARTED IN 10 SECONDS. If I switch moreover to enable KEYBOARD SUPPORT (USB) or MOUSE SUPPORT (USB) in bios, the delay is really catastrofic - it takes 1-2 minutes for the initial MEGAPC screen to go away and then another 1-2 minutes starting windows.
I checked my BIOS version, it was 1.0, so I tried to update to 1.1 but it is the same.
This is very annoying, I believe that you have some solution for me, otherwise I will have to return computer to my supplier.
Many thanks for you help and nice day
Vladimir Buzalka
Czech Republic

Hi
Thanks for the reply. After a lot more googling- it turns out this is a general Oracle problem and is not solely related to use of the GEOMETRY column. It seems that sometimes, the Oracle optimiser makes an arbitrary decision to do bitmap conversion. No amount of hints will get it to change its mind !
One person reported a similarly negative change after table statistic collection had run.
Why changing the columns being retrieved should change the execution path, I do not know.
We have a numeric primary key which is always set to a positive value. When I added "AND primary_key_column > 0" (a pretty pointless clause) the optimiser changed the way it works and we got it working fast again.
Chris

How to export usb controller custom assignment settings to another computer

Hello everybody
is there any way to export Logic 9's USB controller assignments to another computer setup, to work with same controllers bought from a local music store, with even up to 7 usb controllers in one setup? This way, with a preference export file type of method, time would be saved lightyears by just choosing some "import settings file" function and *click*, every pot in those multiple controllers would do the intended function on the other system too.
Example scenario,
computer 1) MacBook + 7 different usb controllers wanted to by exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport and Novation Nocturn
computer 2) MacBook Pro + 7 different usb controllers wanted to be exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport, Novation Nocturn + some other random USB controller in the chain also (wanted to be left outiside any assignment compromises)
I don't know what information of controller devices Logic saves into different files for recalling purposes, and how accurate device-identifying-wise the assignment files are, but how could I make "computer 2" controllers do the same fader/vpot/button functions as on "computer 1" using those same products over there, and still leave that existing extra eight'd controller on "computer 2" left as it is/was?
Ps. If there IS a file exportable for instant multi-controller configuring this scale, does the actual physical connecting order into USB hubs (all these devices could even by connected via single USB-hub cable into MacBook?) change the file's workability, I mean if I'd swap a few controllers into each other's places on the USB hub, would that smoke that preference file's workability whole together then?
THANKS for every reply, Really, REALLY, appreciate it
- Aleksi Bovellan
Finland
www.glideslope.me
PS. Sorry if this was confusing or "hard to read" in some way, I really tried my best to include every possible information of problem to save the time to resolve it..!

Hi
Have you tried copying the Control Surfaces preferences from 1 Mac to the other?
<User>:Library:Preferences
com.apple.logic.pro.cs
Note that the User Library is hidden bt default in Lion/M Lion: use the Finder:Go menu whilst holding down Option to get there
CCT

HELP - USB Controller Shows up, but won't work

I bought a USB controller off eBay and it is reconized my Mac OS X under System Profiler and ControllerMate http://img523.imageshack.us/img523/8374/picture2tx2.png
and it wont work, help would be much appreciated.

Your picture looks like you have a USB joystick and it is working. You need some program that uses a joystick (no standard system routines uses one) - what programs have you tried ?

USB controller in Macbook Pro 15 (late 2013)

I'm looking to buy a video capture box for capturing from various devices at up to 1080p @ 60 fps.
This device seems a good candidate: http://www.solarisjapan.com/xcapture-1-usb-3-0-hd-capture-unit/ and reviews are pretty positive, it's also compatible with the free Open Broadcast Software app I currently use for capturing on a PC desktop.
The device only works in Windows which is fine as I have Bootcamp set up. The issue is it uses usb 3.0 and only works with Renesas and Intel usb controllers.
My question is, what usb controller is used in the Macbook Pro 15, I'm thinking either Broadcom or Intel, and obviously I'm hoping Intel.
Many thanks in advance,
Pete

Thanks sanjampet, I'm using Mavericks.
Info is:
USB 3.0 Hi-Speed Bus:
Host Controller Location:    Built-in USB
Host Controller Driver:    AppleUSBXHCI
PCI Device ID:    0x8c31
PCI Revision ID:    0x0005
PCI Vendor ID:    0x8086
Bus Number:    0x0a
Apple Internal Keyboard / Trackpad:
Product ID:    0x0263
Vendor ID:    0x05ac (Apple Inc.)
Version:     2.25
Speed:    Up to 12 Mb/sec
Manufacturer:    Apple Inc.
Location ID:    0x14c00000 / 3
Current Available (mA):    500
Current Required (mA):    40
BRCM20702 Hub:
Product ID:    0x4500
Vendor ID:    0x0a5c (Broadcom Corp.)
Version:     1.00
Speed:    Up to 12 Mb/sec
Manufacturer:    Apple Inc.
Location ID:    0x14800000 / 2
Current Available (mA):    500
Current Required (mA):    94
Bluetooth USB Host Controller:
Product ID:    0x8289
Vendor ID:    0x05ac (Apple Inc.)
Version:     0.78
Speed:    Up to 12 Mb/sec
Manufacturer:    Apple Inc.
Location ID:    0x14830000 / 6
Current Available (mA):    500
Current Required (mA):    0
It doesn't look promising!

Pcmcia usb controller doesn't work with Tecra 8200

Hi,
I have an old TECRA 8200 notebook (Intel Pentium III, 847 MHz, 512 MB RAM) OS: WIN XP with latest patches. For it has no USB 2.0 I have bought a PCMCIA USB Controller (Chip NEC). The controller has been recognised but XP is asking for a driver. The controller hasn't been delivered with a driver.
Does any one has an idea how I could get the controller up and running.
thanks
regards
Fred

I mean, independet from the fact that this is not really a toshiba related problem, could you please post the name of the USB PCMCIA device?
I mean the manufacturer or something because if XP asks for a driver then there should be one available, or?
Please, give a feedback and what you could do additionally is to google for the PCMCIA device. The best way is often to search for the chip (in your case NEC).
Regards

Connection PDA through virtual USB controller in Virtualbox

hi! i need some guideness for doing the connection with my pda device and usb controller in virtualbox
i ve found what to do on user guide of virtualbox. i'm placing the the specific part that i found in the page 49.here it is user manual of virtualbox:
On Linux hosts, VirtualBox accesses USB devices on Linux through the usbfs ﬁle
system. Therefore, the user executing VirtualBox needs read and write permission to
the USB ﬁle system. Most distributions provide a group (e.g. usbusers) which the
VirtualBox user needs to be added to. Also, VirtualBox can only proxy to virtual ma-
chines USB devices which are not claimed by a Linux host USB driver. Please refer to
the Driver= entry in /proc/bus/usb/devices to see which devices are claimed.
in concole when i press lsusb it shows me the device (specific now HP iPAQ but i also have another Qtek 9000)
Bus 002 Device 002: ID 03f0:1c1d Hewlett-Packard
can PLS someone guide me because i dont understand how to do what i have to do to make it work!!
THANK you in ADVANCED.
PS: i would appreciate if it the help specific steps i have to do..

iphitus wrote:
I have no idea about virtual box, however you can do a great deal with PDA's natively under linux.
using synce you can install apps, browse files. It can even install from exe's using a tool called orange. Files can also be browsed through a vfs in kde. (and maybe gnome?). Syncing can be done with opensync.
can you tell me specific commands and examples because i havent done anything in the specific field, so i dont have a clue how it works? i have download synce , but except from that its all chinese for me...(sorry for that but im Greek and i cannot say that its all greek to me... ), i use KDE. ty
PS: can you do with that sync with thunderbird?for emails and calendar?
Last edited by ironwiller (2008-08-07 07:13:10)

890FXA-GD65 and possible USB Controller related issue?

Hi all - Been having a bad time of it with a new system build for a little under a month now. Have tried to capture my "notes" below, any idea of a root cause? Is anyone aware of known issues with the board; the board and Windows 7; the board and some other component(s)?
My issue: During Windows 7 x64 installation or startup, the system will freeze at the "Starting Windows" screen.
My system specifications:
MOTHERBOARD: MSI 890FXA-GD65 (BIOS ver 18)
CPU: AMD Phenom II X2 555 @ stock speed (HDZ555WFGMBOX)
MEMORY: DDR3 1600 2X4GB G.Skill Ripjaws-X [DIMM1 & DIMM2] (F3-12800CL9D-8GBXL)
VIDEO CARD: XFX Radeon HD 5670 512MB (HD-567X-YNF3)
HARD DRIVE(s): 2 x Western Digital 500GB 7200 drive (WD5000AAVS)
POWER SUPPLY: Antec NEO ECO 620C 620W
Windows 7 x64 (Ultimate edition, retail)
This problem has existed since I first built the system and is consistently reproducable.
I am able to avoid the issue by disabling the USB Controller in BIOS prior to initiating the Windows installer. This will allow me to proceed through Windows installation, but as soon as the USB Controller is enabled once again, the issue recurs. Having to disable USB support is undesirable.
I'm now on my second 890FXA-GD65 motherboard, having RMA'ed the first board after a fairly brief exchange with MSI tech support(2 replies, with the eventual suggestion of RMA for a faulty USB controller). So I went through the RMA process with the online retailer, receiving a new board today.
The problem is that the RMA replacement behaves in exactly the same manner. Normally this would suggest to me that the problem may lie with one or more of the other components, but I've not been able to identify issues with any of them. One obvious suggestion would be to try swapping out components, but my resources are constrained on that front - video card happens to be the only component for which I have a alternate that I can test with, actually.
As far as troubleshooting investigation, here's what I've done/observed:
1. Windows installation/startup will succeed if the USB Controller is disabled in BIOS.
2. The same behavior can be observed with a Windows Vista installation disk as well.
3. When loading Windows in safe mode, the last driver file loaded was disk.sys
4. Memtest86+ (v4.2), repeated full passes reveal no issues with the system memory.
5. While seeming that it would be an unlikely factor, I have swapped out video cards(to an eVGA 8800 GTS 320MB), but observed the same issue still exists.
6. Running in a single DIMM configuration affected no change.
7. Have disconnected one or the other of the hard drives with no change.
8. The BIOS version installed is equivalent to the latest(and only) version posted on the MSI support site.
So...any ideas on what's left to try? I've done enough reading online to notice that I'm not the only person to have observed this behavior, but have yet to encounter any explanation of it nor a resolution.
Any suggestions?

Trying to catch the points that weren't explicitly spoken to by me in the last attempt:
@Stu - Regarding testing with zero USB devices connected - this was done as part of troubleshooting and it has no observable effect, so I think that I can rule out a bad USB device being the culprit and I apologize for not making that clear previously.
@Frederik - I've done a little more legwork on the memory item. Troubleshooting, for the most part, has been executed with this memory set to run as DDR1333 @ 1.5V as that is what the board auto-defaults to(the kit is rated as DDR1600 @ 1.5V) It was at the defaulted setting that I ran memtest86+ and no errors were reported.
I've also just now made an attempt to run this memory as DDR1066 at 1.65V and still there is no change in results. In my research on this specific kit, I have not run into accounts like mine - in the accounts that I have read regarding a poor experience with the kit, memory has either been been obviously bad, for which failures are reported in diagnostics like memtest. ...or, I suppose that there's also the random guy complaining about his overclock not working or the memory speed defaulting to the wrong value in BIOS.
Frankly, I don't want to battle any particular component and I owe no allegiance to this make of memory. I do want to try to be objective, given that I'm stuck with these modules until I make the decision to RMA. As such, I had read what info is available out there - prior to purchase, I hadn't noted so many reports of issues with this kit across a considerable sample size of feedback so as to cause me initial concern, or else I would have gone with a different kit/different brand. Probably will do that anyways, next time, but in the meantime, I'm afraid of this being a distraction. If both myself and this other person(drgan) had both been using the same memory kit, and thus it was more likely to be the common thread, I'd certainly be more inclined to this line of reasoning. But since he's using Kingston and in the few other accounts of a system freezing on USB controller enabled status I've noted varied memory kit brands, it doesn't seem to me to be an obvious culprit. But if not, then what's left to consider? The other interesting factor to me is that the issue appears to be Windows-centric....but...

Satellite A210-133: How to install Intel or via usb controller on windows 7

Hello!
I have a toshiba satellite a210-133 which i have upgrade it to windows 7 32 bit version.
Everything have been installed fine, but i have an intraoral machine which is connected with usb and it does not work properly.
I have questioned the manifacture of the machine and they told me that it wants Intel or VIA USB controller to work properly.
so i look at my computer\manage and i saw that
i have not have this controller.
Can you help me about it??

Hi mate
To be honest Im not quite sure what USB controller you mean exactly.
The notebook supports common USB 2.0 ports.
The Win 7 provides own Microsoft USB drivers which controls this USB 2.0 ports.
If the USB ports dont work correctly, then you should check if you need to install the chipset driver.
Usually such chipset driver can be found on chipset manufacturer page.
As far as I know the notebook uses the AMD M690V chipset (code name RS690MC + SB600)
So check this.
Furthermore many 3rd party USB devices needs an own driver.
I dont know if you intraoral machine needs such drivers but I think that the manufacturer of this machine should know this. So if you need such driver, please get in contact with the intraoral machine manufacturer to get such software.

USB Controller Missing in Device Manager (HP Envy dv6t-7200)

I have 3 USB 2.0 ports but I'm only able to use one of them. Device Manager has a yellow warning symbol next to "Universal Serial Bus (USB) Controller" and I'm unable to find any drivers. I'm not sure what chipset I have because my OS didn't come with anything downloaded, so it's missing many drivers.
Specs:
HP Envy dv6t-7200
Windows 7 Professional SP1
Intel Core i5-3210M CPU @ 2.5 GHz
This question was solved.
View Solution.

You're very welcome.
When you don't see a complete set of drivers for a selected operating system, that means HP doesn't really support that OS.
They used to not list any drivers for unsupported operating systems, so at least the partial list is better than nothing.
I know that doesn't help those who need drivers for a specific operating system, but some of us know where you can find them.

HP 250 G2 usb controller drivers

hello, i'm running a windows 7 64x bit ultimate edition on my hp 250 g2 with CPU N2810.
i'm having a hard time finding some drivers for the following device Universal Serial Bus (USB) Controller.
SP64706 and SP55975 can't install driver. Error: This computer does not meet the minimum requirements for installing the software.

Hello, I just found the solution. Install the newest Intel USB 3.0 Host Controller Driver (International) from this link: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheT...
All of the USB ports on the HP 250 G2 in Windows 7 64 bit will work.

USB Controller

Similar Messages

Maybe you are looking for