USB Devices not being mounted

I have attempted to connect both my digital camera and iPhone, and neither have worked. Unfortunately, I can't find my camera lead, but I do have my phone. This is the output of journalctl:
May 14 20:11:34 anon kernel: usb 3-9: new high-speed USB device number 35 using xhci_hcd
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon mtp-probe[10722]: checking bus 3, device 35: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon mtp-probe[10722]: bus: 3, device: 35 was not an MTP device
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9"
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Input/output error
May 14 20:11:34 anon systemd[1]: Started Socket daemon for the usbmux protocol used by Apple devices.
May 14 20:11:34 anon systemd[1]: Starting Socket daemon for the usbmux protocol used by Apple devices...
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.696][3] usbmuxd v1.1.0 starting up
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.697][3] Successfully dropped privileges to 'usbmux'
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.698][3] Could not get old configuration descriptor for device 3-35: -5
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon kernel: usb 3-9: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon kernel: usb 3-9: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon org.gtk.Private.GPhoto2VolumeMonitor[712]: (process:22878): GVFS-GPhoto2-WARNING **: device (null) has no BUSNUM property, ignoring
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon colord[402]: (colord:402): Cd-WARNING **: CdMain: failed to emit DeviceAdded: failed to register object: An object is already exported for the interface org.freedesktop.ColorManager.Device at /org/freedesktop/Co
May 14 20:11:34 anon kernel: ipheth 3-9:4.2: Apple iPhone USB Ethernet device attached
May 14 20:11:34 anon kernel: ipheth 3-9:4.2 enp0s20u9c4i2: renamed from eth0
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Connecting to new device on location 0x30023 as ID 1
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Initialization complete
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.778][3] Enabled exit on SIGUSR1 if no devices are attached. Start a new instance with "--exit" to trigger.
May 14 20:11:34 anon usbmuxd[10735]: [20:11:34.779][3] Connected to v2.0 device 1 on location 0x30023 with serial number xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
May 14 20:11:34 anon baloo_file[814]: "/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2"
May 14 20:11:34 anon kdeinit5[748]: QObject::connect: invalid null parameter
May 14 20:11:34 anon baloo_file[814]: QObject::connect: Cannot connect (null)::accessibilityChanged(bool,QString) to Baloo::StorageDevices::slotAccessibilityChanged(bool,QString)
May 14 20:11:34 anon systemd-udevd[10739]: Assertion 'path' failed at src/login/logind-acl.c:72, function devnode_acl(). Aborting.
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] terminated by signal 6 (Aborted)
May 14 20:11:34 anon systemd-udevd[214]: worker [10739] failed while handling '/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:4.2/net/enp0s20u9c4i2'
May 14 20:11:34 anon systemd-coredump[10745]: Process 10739 (systemd-udevd) of user 0 dumped core.
May 14 20:11:35 anon org.gtk.Private.AfcVolumeMonitor[712]: creating volume for device uuid 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'

So, I can view the files on the iphone when using an "Open" dialog in a GTK app, but not in Qt or any other apps. I'm using Plasma 5 desktop, accessing files and mounting with Dolphin
lsblk doesn't change, it remains as:
sda 8:0 0 232.9G 0 disk
├─sda1 8:1 0 512M 0 part /boot
├─sda2 8:2 0 67.8G 0 part /
└─sda3 8:3 0 164.6G 0 part /home
sdb 8:16 0 2.7T 0 disk
├─sdb1 8:17 0 1.8T 0 part /run/media/anon/c66655000
├─sdb2 8:18 0 488.3G 0 part
└─sdb3 8:19 0 488.3G 0 part
sr0 11:0 1 1024M 0 rom
Last edited by joshy_15 (2015-05-15 09:49:00)

Similar Messages

USB Devices not being detected

I have a couple of problems i've been struggling with for a while, searching the forums to no avail.
1)
Firefox's UI font sucks.
Here it is compared to Thunar:
EDIT: Fixed. I had anti aliasing Disabled in .font.conf
2)
USB devices aren't autodetected after I start X.
i.e. if i plug my mouse before logging in (shell) and starting x, it works, but if i wait till later, it doesn't.
I don't think usb drives are being detected either, but I can't figure out how to try to mount them either. I would like to have automounting of usb drives and autodetection of usb peripherals.
Thanks
Last edited by underpenguin (2008-02-06 02:14:04)

I know you said you searched the wiki and forums, but have you seen this?
http://wiki.archlinux.org/index.php/Firefox#Fonts

Is anyone using VMware fusion and having trouble with USB devices not being recognised

I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
Any Ideas ?

Device not recognized by iTune
http://support.apple.com/kb/TS1591

Qosmio F10 - USB devices not being recognised properly

Hi there,
I've been having major problems with the USB ports of my Qosmio F10. When ever I try to plug in a USB device, the F10 recognises there is something there, but always categorises it as an unknown device. For example, everytime I try to attach a USB mouse, it does not instantly recognise it, even after previously having gone into the device manager and manually installing a driver.
This has been the case since I bought the laptop 5 months ago, but I cant ignore it any longer.
I have already tried :
- uninstalling all USB controller and hub drivers and reinstalling
- making sure that power save for the usb devices was not ticked
-ticking "install software anyway" in the driver signing options
When I open up device manager my USB looks like this
- Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24CD
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C2
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C4
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C7
-USB Root Hub
-USB Root Hub
-USB Root Hub
-USB Root Hub
Any help on this is much appreciated as its driving me nuts :-)

Hi
I agree with Jack. You have suggested that the USB devices were recognized but as an unknown device. In this case the device drivers are needed.
Which USB devices did you connect?
Sometimes some USB devices cannot be recognised properly because of the low power of the USB ports. If the USB device needs more power than 500mA standard power the OS could has some problems with the recognition.
In this case you need a external power supply or a USB hub with the power supply.

Usb devices not being recognised

hello my external devices such as my printer or edirol sound recoreder are not appearing on my desktop when i plug them in. After seeking advice i have located them in the system profiler (usb part) and it can read and recognises them. however i do not know what to do next does anyone know what to do as i have no idea and really need it to work for my uni work, please help cheers

First welcome to the discussions.
Most USB periperals come with either Cd or software to run them. Printers, Scanners, Cameras, and some don't.
Each one can be a little differnt. I will use a Printer, If it is compatible.(OSX has some drivers installed to use these devices but not for all.)
First let's start from scratch pull the power on your printer, and wait a minute or so. Plug it back in and restart your computer.Make sure the USB is plugged in when you do this, This will reset the printer and the computer.
place the disc that came with the printer in and Install the software, as soon as you are done go to your printer manufactures site and search for the latest download for your Printer and Operating system. Download it.
Go to your Mac HD and then Applications folder and you will see a folder that matches your printer,drag the folder you downloaded from there site to this folder and double click it inside that folder. Depending this printer folder can be named different things, such as (HP952c Printer) or set up or Install. It can also be located in the Utility folder.
Open it and see if there is an Install option. click it and launch it.
This may seem a little confusing, but it's not really,
Most people have problems with one of a couple a different things.
Either there printer isn't compatibble,
Or they havent opend the folder in the Applications, or Utility folder to launch there printer drivers.
After you read this it should be pretty easy for you. Come back and tell us if this helped. Don

Updated to lion usb devices not being recoqnized

After going to the apple store in Cardiff Wales i had a fresh computer OS wise ( its a early edition 2008 mac book pro )but cant seem to get the usb to pick up my Nikon camera. found the devises in Finder but it is not showing any thing plugged in ,,, this is a APple reload of the new Lion 10.7.2 and all updates. any one know what im doing wrong ? seems like theres a few things that dont work either ,, ie the back lite to the key board and the screen brightness.

I know you said you searched the wiki and forums, but have you seen this?
http://wiki.archlinux.org/index.php/Firefox#Fonts

Wmdc usb device not recognized

I am have a 800w and when o connect to my computer withing the 1sync it get disconnected error message on my computer
USB device not being recognized due to a malfunction
has anyone got the error message ? is there a fix for this
Post relates to: Treo 800w (Sprint)

Hi phonedrn8,
The only think I can think of is if you don't have the right version of WMDC. The WMDC package has the USB driver bundled with it. If you're using Vista 64-bit and you use the 32-bit WMDC, this error would likely occur. To check your version of Vista, click the Start Menu, right click Comptuer, and select Properties. About 2/3 of the way down the new window, it'll tell you 32 or 64 bit.
Then, head over to http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx#download and make sure you download the version that's correct for your system.
Post relates to: None

3G iPod Touch "USB device not recognized" on any PC

My 3G been working fine for 1+ yr. Running iTunes 10 on a WinXP system; latest OS (4.2.1?) everything was up to date and working fine. One day I get "USB device not recognized" when I hook it to the PC. Also, when connected to a charger, I don't get the battery screen. It charges either way, but slowly.
I visited the local Apple store & the guru checked it on her system, with same results. I just reset it, hoping for a miracle, but it still isn't recognized.
Help?

Hi Che-Che. I'm having what looks like the same problem. Cannot get this iPod Touch 4th Gen to be recognized on any computer. When I use the white Apple cord that came with it, absolutely nothing happens. Not a sign of being recognized or not being recognized. I brought a third party cable made by Scohche and it is made for iPod, but at least the computer acts like it is starting to load the USB driver, then it fails. The other cable you are talking about, was it an Apple cable? I'm leaning towards it being a faulty Apple cable.

Itouch - USB device not recognized and Itouch now no longer works

I'm now on my 3rd Itouch since December all due to the same problem. All seemed to be going well with my 3rd replacement Itouch. Having loaded most of my cd collection into ITunes the night before I was going on holiday I synced my Itouch. Some sort of automatic download took place I think from Microsoft and suggested my drivers were being updated. Next thing I got message to restore my Itouch to factory settings. I did this and all the problems I had with my previou Itouch's started again.
When I now plug my Itouch into my laptop it says "USB device not recognized" and the Itouch will not switch on. I've done everything including reinstalling Itunes, holding down the power and home key but to no avail. Looks like I'm going to have to send my Itouch back again. I have a suspicion that a Microsoft download is corrupting the drivers. If anyone can help I would be very grateful. I really like my Itouch but the fact it keeps failing leads me to wonder if I should opt for something else.

I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
http://support.apple.com/kb/HT1808
the showing the usb thingy on the screen part

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

Running Windows 7 via Bootcamp - USB Device Not recognized.

I am running Windows 7 64 bit via Bootcamp on my MacBook Pro (2012 non-retina display). USB devices are not being recognized within Windows 7 (USB Device Not Recognized error).
I have done some research and tried a few possible solutions but nothing has worked so far. Here is what I have tried:
- Uninstalling all USB drivers within windows and then restarting to let Windows re-install the drivers.
- Uninstalling Intel 3.0 USB Host Contoller and restarting Windows.
- Repairing the drivers using Bootcamp setup.
- Uninstalling bootcamp and re-installing bootcamp services.
The USB drives are working fine within OS X, just having issues in Windows.
Any suggestions?
Thanks in advance.

3.0 is on your OS X DVD. Clearly spelled out in the guide in Boot Camp Assistant, and here -
www.apple.com/support/bootcamp : manuals, look for 10.6 pdf version.
3.0 is pre-requisite for any other
OS X comes with Boot Camp Assistant and you access 3.0 drivers while in Windows.

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What should I do?

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What do I do?

Is the iPod Touch specifically stated as being compatible? Have you tried to perfrom a hard reset of the iPod with it still connected? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

USB Device Not Recognised - unable to connect

I am having a serious issue! My ipod was working perfectly, then for no reason i got the error message 'USB device not recognised' from my PC when plugged into a 2.0 port. I am unable to mount to restore to factory settings - definitely isn't a USB connection issue - I have tested the same port with my printer and it works perfectly! When I troubleshoot, The PC tells me that it is an unknown device, and that 'No drivers are installed for this device.' Where can I get Drivers for an IPOD 4th Gen?

This is a shocker! I've now tried the following:
- re-setting iPOD to factory settings
- re-formatting iPOD
- removing then re-installing Itunes, both old and new
version
- resetting the COM thingy
- re-installing iPODservice.exe
- deleting all systems drivers and re-installing
- re-setting iPOD whilst connected
- using old Ipod updater 2004-08-06 and the later 2004-11- 15 version
All I have now is an empty iPOD and a music library with 30gig of tunes within it, with no way of marrying the 2 together. It's been 2 months now and I've really got the hump!
I think that there is a serious defect with either the iPOD or the software - we are not isolated cases! (have you seen how many discussion strings there are on the same subject?)
If you manage to find any other possible fixes, please let us know! In the mean time, I'm off to see about getting one of those new Sony thingys!

USB device not recognize & cannot recharge ipad

Hi all,,
I have a problem in the Recharging iPad, my iPad has fall and hit in the right corner near usb cable Entrance of adapter power, and now I cannot recharge it, And not identified by connect to the computer (USB device not recognize).
The only way to charge iPad by connecting power adaptor charger to ipad and turn completely off.
please help me to solve my problem.
Thank you.

I am having the same issue. iTunes 10.2.1 (1) will not recognize my iPad (4.3.1) and when I plug it into the wall charger (10W) it oddly enough says Not Charging although it really is being charged. How much slower or faster than normal is hard to say.
I know there is no issue with my computer as my other iPad works as does my iPhone. I even tried to connect my "broken" iPad to my macbook pro iTunes and still no joy.
I am 3 days away from my 1 year purchase anniversary and need to travel on Sunday.
This ***** bad. But I have no choice probably to take it in to get serviced and may be forced to fork out more $$ for an extended warranty plan. Thanks Apple....

4th generation shuffle "USB Device Not Recognized"

After a trip to the Apple Store with my iPod in which they diagnosed my iPod as being a "dud," I happily came home to plug in my new iPod, which...LOW AND BEHOLD...displayed the same issues. Here is what is happening:
1. I plug in my iPod Shuffle to my HP Pavilion running Windows 7.
2. I hear that noise (boo-boop)recognizing that a device has been plugged into my USB drive.
3. A message pops up in the right-hand corner of my computer that reads, "USB Device Not Recognized" at which point I click for more information.
4. The detailed view shows the following message: "Windows has stopped this device because it has reported problems. (Code 43)"
What I've already tried:
1. Uninstalling and Re-installing all of the drivers under the Universal Serial Bus Controller in the Device Manager.
2. Running updates on iTunes and on my Windows Operating System.
3. Updating iPod drivers.
PLEASE HELP! I am frustrated. I had a 2nd generation Nano that was stolen out of my car, but it worked fine for years. Also had an old shuffle (2nd generation) that worked fine with this computer/operating system. Any advice helps, I don't want to wait another 2 hours at the Apple Store only to be sent home with another device that doesn't work with my computer.

Did you try this:
http://support.apple.com/kb/ht1925
It sounds like the Apple USB stuff is your problem. I would just do the full uniinstall and reinstall.
Make sure you connect directly to computer, not through a USB hub.
If none of that solves the problem, try creating a new user and see if it works when you log on as that new user. If it does work, you know you have something installed on your normal account that is fooling with the iPod.
i

USB Devices not being mounted

Similar Messages

Maybe you are looking for