Usb flash boot drive with mavericks is damaged cannot get another download from apple

Hello
I successfully downloaded Mavericks 10.9 onto my Macbook Pro and clean installed, when I went to carry out the same procedure on the Mac Mini the USB flash boot drive with the downloaded Mavericks was damaged.  I cannot get another copy of Mavericks as Apple do not have downloads available.  I do no wish to upgrade to Yosemite just yet.  How can I get a copy of Mavericks, I did looked at my account and Mavericks is there any suggestions would be appreciated. 
Thank you

If it is in the Purchases tab of the App Store, you should be able to download it.

Similar Messages

  • I lost all my purchased songs when my hard drive.  Can I get another copy from Apple?

    I lost all my purchased songs when my hard drive.  Can I get another copy from Apple?

    Quite possibly, at least assuming you are based in the US. Install the latest build of iTunes, sign into the iTunes Store and click the Purchased entry in the Quck Links panel. Here in the UK I only get tabs fro Apps and Books but, if I understand correctly, you should also get a tab for Music. Click on the Not in My Library button and you should be able to download your purchases again.
    tt2

  • Cannot Make An External Boot Drive with Mavericks

         I cannot make a bootable drive using a clean image of Mavericks.
    I formatted the drive as mac extended journal and created a partition using the G U I table. The drive is a 2TB Western Digital MyPassport USB external. When the computer reboots, the install doesn't continue.
    Has anyone else had this issue? If so, how was it fixed?                   

    Try removing the other drives is almost always essential with a Mac Pro to get Windows to work. Even Windows 7 doesn't understand seeing Apple GPT/EFI during install - they can be reinstalled later.
    Or it could be that any hardware RAID controller also has to be removed. Like Apple's Pro RAID or ATTO FC.
    Even w/o the CalDigit and just Apple GPT you would have gotten an error message.
    BCA is still after all these years unable to understand and work with a Mac Pro properly. A one-trick/ one-drive only utility that is stumped when it runs into a dual drive setup. Which way why I gave up on using Mac Pro for dual-boot and built some PCs just for Windows 7. I install Windows on PC, then transfer the drive to Mac Pro and it works just fine!
    Xserve RAID Card: Boot Camp does not support RAID configurations
    Xserve RAID Card: Boot Camp does not support RAID configurations ... Boot Camp does not support the installation of Windows onto a Mac using hardware or software RAID (Redundant Array of Independent Drives). This includes Microsoft Windows built-in software RAID as well as the Mac Pro RAID Card.
    http://support.apple.com/kb/HT2855

  • USB Flash Boot Drive

    I created a USB flash drive a few months ago to assist in imaging Surface Pro 3 Tablets and that flash drive is working great. Today I am trying to create a second flash drive and it will not see any Task Sequences and just errors out. I have created both
    of them identically, same setting, same boot image, same user account, same brand/type flash drive (tried two different drives), yet the newer one will not see the advertised task sequences and just comes up as failed just before I am able to choose the Task
    Sequence. If I boot the tablet with the older created USB drive it works perfectly then power off and reboot with the new one and it will not see the advertisements...?  We are an HTTP environment and I am choosing Create Task Sequence
    Media | Bootable Media | Dynamic media | USB Flash Drive | no Password | Cert Date are default (Today through one year from now) | Boot image is the same one that I always use | DP same | MP Same | no prestart commands.
    Any thoughts?

    Ok thank for your replies, I saw them this morning but have not sat at my desk until now.... one of those days.  So I am not sure why, don't have the time to investigate, but the 'Dynamic Media' option is no longer working however I am and to create
    a USB Stick as 'Site-based Media' and that is working for me.  Dynamic used to work and for some reason it broke.  I appreciate the replies and when I get time I will look at those log but wanted to reply so you don't think i forgot ;)

  • HT6061 Where can you get a replacement 512 SSD drive for these? Can you get one directly from Apple?

    Looking to purchase the original 512 ssd drive that comes in the late 2013 mac pros.. i cant find anywhere online but Ebay to buy one from. Are they available directly from Apple?

    Apple does not sell the SSD parts separately to my knowledge. If your SSD is defective and was an original Apple item, any Apple Store or authorized Apple service provider can replace it. They won't sell you the part so you can do your own repair, though.
    Why would you need to replace yours when your Mac is still in warranty? Are you trying to upgrade? If so, I don't know of any available as of this time, though OWC says they'll have SSD upgrades for the 2013 MP later this year.
    Regards.
    Message was edited by: varjak paw

  • Boot Installation media from USB flash/Pen Drive?

    Hi there,
    The hardrive on my X60 died. Died so badly that even Resue and Recovery wouldn't start yet alone Windows (even in safe mode).
    I have a new hard drive and installation media en route from Lenovo (laptop was under warranty)
    The problem is that the installation media is on CD/DVD and my laptop does not have an optical drive.
    So my questions are:
    1. Can the installation media be installed from a USB Pen/Flash drive? (the BIOS does support USB booting)
    2. Does anyone have experience of this or instructions?
    On a side note I find it slightly irritating that even under warranty Lenovo won't supply me software/hardware that will return my laptop to its original state without the user, me, potentially having to buy an external optical drive. The warranty support chap said "you'll just need to buy an external USB optical drive" - *sighs*
    Cheers
    Lawrence

    Tnx 4 ur reply RX-8.
    I bought the lappie used. It had BIOS ver. 103 when I bought it, so I upgraded to ver. 111 and it kept on booting from pen drives just fine.
    A few days after I bought it, the internal HDD failed with S.M.A.R.T. ID 5, something about reallocated sectors count. I got an exact replacement for the dead HDD. When I installed it, I unplugged the lappie's battery, then plugged the battery back in before I buttoned it all up. I think THAT was the start of my USB flash pen drive boot problem.
    The new HDD is fine. It passes the HGST Drive Fitness Test with long SMART test, which takes between 2 and 3 hours.
    I tried the EC update. Inside the zip file was a TXT file with a link to an MSI page that has a PDF file on how to do the EC update. I had that PDF open on another machine when I did the EC update so I could follow the instructions exactly.
    After an F9 on the UEFI screen to restore defaults and an F10 to save the UEFI config, I rebooted and everything seemed OK. I then used a pin to force a reset. For the second time, I unplugged the lappie and waited a few minutes for the EC memory to clear.
    I still have the same problem. I can't boot from a USB flash pen drive.
    I'm enclosing shots of my USB config with XHCI enabled and disabled. I tried to boot from a pen drive with both XHCI settings. No joy. Will I ever be able to boot from a USB flash pen drive again?
    I should also mention that I have a portable HDD with a USB 3 interface that boots just fine on other machines but won't boot on the GS60 Ghost. The LED on the portable HDD comes on and the lappie screen just sits there with a blinking underscore cursor.

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7.  I need it for my MacBook Pro 13", 2012, running Mountain Lion

    Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7.  I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp.  I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..?  I'd like it to work with both operating systems, using the built in hardware encryption.  Thanks

    This article may help: A flashing question mark appears when you start your Mac.

  • Does the Apple USB tp modem work with Maverick?

    Does the Apple USB tp modem work with Maverick?
    If not, what tp modems do work with Maverick?

    Important: The Apple USB modem is not supported with OS X Lion or later.
    http://support.apple.com/kb/HT3152?viewlocale=en_US&locale=en_US

  • What usb modems are compatible with mavericks

    Apple USB modems arenot com[patible ith mavricks, a Zoom mini USB modem hardly work, what modems will work>  Thanks much.!

    Thanks L.D., I appreciate the help.  I asked U.S. Robotics tech support whether the USR5637 V92 56Kbps Usb modem would work with Mavericks 10.9.4.  Said they'd reply Monday.  I'll report the answer.
    Best,
    Stan

  • Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer

    Hello! I have a printer,Canon MP250 and I bought a new MacBookPro with Maverick and I cannot work this printer with the driver that came with the printer and I've tried to find an update but with no success, can you help me?
    Thanks!!

    you can try resetting the network settings in settings or you can try doing a reset - hold down the home/power button together until you see the apple logo and then release.  Then wait for the phone to boot back up.  You won't lose any data.

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick

    Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick
    THE use of the apple support is a mess also.
    I want to be able to use my MAC fully and easily like I used to with Snow Leopard. 
    What is wrong with this maverick OS?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • How do I share a hard drive with the new iMac to load a disk from macbook pro

    How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
    thanks

    The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

Maybe you are looking for

  • Memory on GS5 Samsung phone

    How much memory is in the Samsung GS5 that is being offered by att for free with a new 2 year contract. The offer is over today.

  • PLSQL function body returning an sql report returns ORA-01403 No Data Found

    I am on APEX 3.1.2.00.02 and Oracle 10g. I am developing a report with SQL Query (PL/SQL function body returning SQL query) type. But on running the report I am getting report error: ORA-01403: no data found Region Source declare   qry varchar2(32767

  • RSDRI_INFOPROV_READ and navigational attributes

    Hi experts, can you please share your knowledge and experience with me? the issue: within a custom ABAP program i am calling function module RSDRI_INFOPROV_READ with standard parameters. this works fine only if no characteristics or basic characteris

  • Iphone 5 SIM card not installed or no service

    Hi from lady few weeks I am having this problem where phone says SIM card not installed or no service. Turning the phone on and off does work but it happens at least ten times a day. I have got a new SIM card thinking its a problem with the SIM card.

  • Soap RECEIVER adapter ssl config

    we are consuming a web service in sap ECC system via XI using SSL. So I configured receiver soap adapter. Imported the certificate provided by web service provider to J2EE visual admin key store. However I am not able to see my ceritificates popluate