Usb keyboard not working in windows xp pro sp2 , drivers not installing rig

I just got this mac book pro. Haven't owned a mac sense LC II.
I got a stand for the notebook at www.raindesigninc.com the mstand and I got the $50 aluminum usb keyboard apple sells.
I installed windows xp on a 50 gb partition, put the bootcamp in got all the drivers installed.
Then I got to the office today plugged in my apple keyboard and it was not recognized. I didn't have the bootcamp cds with me at the office.
Are the drivers for the aluminum apple usb keyboard on the bootcamp cd?
I've done some searching on google, and the only solution that i've read is downloading a new version of bootcamp then using a program called transmack to pull the driver out of the bootcamp image file. I hope there is a simpler soution that won't take up so much time.
So do I need to put bootdisk in again to get the drivers for this usb keyboard? Or how can I get this to work as it is now the usb keyboard doesn't work. I had to take the laptop off of the mstand and use its own keypad.

found out i just needed to put in the cd that came with the mac book pro

Similar Messages

Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0

We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly.
We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers.
Is there a solution to either of these problems? Without the software we cannot use the fax or scanner.
Thanks.

Can you connect USB 2.0 data drives?
What make/model are the computers?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Flash player not working ie10 windows 8 pro 32

flash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanks

flash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanks

USB MIDI not working in Windows 7 Pro 64-bit

The problem is that even though my devices are recognized in Control Panel/ Sound and in Device Manager, no MIDI data actually flows and I cannot sync my keyboard to the Yamaha software that edits it. The error message in the Yamaha software reads
“The following MIDI ports can not be opened at this time”. At first, MIDI was working and I could sync up, but after about a week, right around the time I uninstalled and re-installed a MS Lifecam, it failed and has not worked since.
I have been working directly with Yamaha tech support on the issue for some time. I have a Yamaha SX70 XS keyboard, which is recognized by Windows as a connected USB device. It is self-powered, not powered by USB. I am using the Yamaha USB-MIDI driver version
3.1.2 for Windows 7 64-bit (the latest driver). And the latest versions of all their editing software for Win7 64-bit. They assure me that those work for other users of Win7 64-bit. In my case though, everything shows up in Windows, but MIDI doesn’t actually
work. And I cannot sync to the keyboard due to the above error message.
Yamaha tells me that their USB-MIDI driver is installing fine on my machine, except that it’s missing a windows driver at the bottom of the driver stack. (You can see this in Device Manager, Properties/Driver tab, then Driver Details. The missing driver
is ksthunk.sys, which I think handles kernel streaming. Sounds like that would relate to MIDI data. They have never heard of this driver not showing up there, and they cannot reproduce the problem. ksthunk.sys is on my machine in c:\windows\system32\drivers\
and in the registry the image path is \SystemRoot\system32\drivers\ksthunk.sys
All devices are “working properly” in Windows Device Manager, despite that missing driver. Yamaha MIDI Driver is shown in Control Panel/Sound, and it can be worked with there (opened, closed, configured, etc.). I have also tried three different USB
cables (but those shouldn't be an issue since the keyboard is showing up in Windows).
I was also advised by Yamaha to edit registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32 and remove all midi, midi1, midi2, etc entries, then uninstall and reinstall all drivers. Which I did, but it didn't help.
So far, no amount of re-installation, event viewing, uninstalling devices, numerous reboots,etc has fixed it. On this machine, that driver just doesn’t hook up to the Yamaha MIDI driver and show up in the stack.
So it looks like it may be a Windows 7 config problem on my machine, and I'm hoping someone here can give me some advice on how to fix it. The Microsoft forums contain a fair number of users reporting similar problems, some are audio and some are webcam
related. I've followed those threads, and done several of the suggestions, but haven't found a solution to this one.
This is a Dell XPS 8300 Windows 7 64-bit PC with all the latest updates, only about six weeks old. I've been struggling with the MIDI problem for most of that time. I'm an IT professional (network and systems admin), so you can be fairly technical
in your response.
Any suggestions will be welcome. Thanks in advance.

I am so glad I found keyman7's description, since I have exactly the same problem.
The problem is not related to MIDI output! I have it with a pure USB-MIDI-input device (keyboard), whichs produces "unknown externeal error" every time I try to select it as input. The same thing occurs with a USB-MIDI-Cable.
I compared the driver details from my system (Dell T1500 windows 7 pro 64 bit) with those of another windows 7 pro 64 bit. On that other system the device works like a charm (so it is not the hardware, either).
On the other system I find ksthunk.sys in addition to the modules that are listed on my system as well (beeing \windows\system32\drivers\drmk.sys, ..\prtcls.sys, ..\USBAUDIO.sys and \windows\system32\SysFx.dll, ..\WMALFXGFXDSP.dll).
Can it be some other USB driver is interfering with this driver stack? I have no idea how to figure out which one it could be. Or, it has been suggested in other threads with somewhat similar looking symptoms, ksthunk.sys has been removed as UpperFilters
entry?
Help - please!

HP Laser Jet 6P does not work with Windows 7 Pro 64 bit

HELP!!
I have a HP Laser Jet 6p with the standard Centronics Parallel Port on the printer.. i bought a new computer and it does NOT have the Parallel IO port on the motherboard.. i am using Windows 7 Pro edition 64 bit..
I purchased a centronics to usb cable from Cables Unlimited.. this cable does NOT support Win 7 64 bit... i spoke to the Tech support there....
The printer is 11 yrs old.. but works like the day it came out of the box..
Can someone please Help .. i am in dire straights..
Ty
Henfischer
<text removed for privacy>

Hi,
I have to buy a new computer and I was worned about this happening. Did you ever get it resolved or do I have to downgrade to XP to keep my printer?
Thank you for your help
CMLN.

Apple wireless Mighty Mouse not working in Windows XP Pro/Boot Camp

I was able to get Windows XP Pro to install successfully on my new iMac, but I can only get a wired Microsoft USB mouse to work with it. When I boot to WinXP with just my wireless Mighty Mouse, the wireless mouse is completely unresponsive. Has anyone else experienced this, and is there a solution? Thanks!

Why not post in the Boot camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Oracle XE Western version not working on Windows XP pro

I have noticed that production version of the Oracle XE Western version does not work properly. The beta version created the database properly, the production version does not. I tried to install it on a Windows XP Pro version.
Below is the alert_xe.log
Dump file c:\oracle\xeprod\app\oracle\admin\xe\bdump\alert_xe.log
Thu Mar 30 11:38:32 2006
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:533M/1023M, Ph+PgF:2253M/2461M, VA:1945M/2047M
Thu Mar 30 11:38:32 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
MMAN started with pid=4, OS id=4092
PSP0 started with pid=3, OS id=4088
PMON started with pid=2, OS id=4084
DBW0 started with pid=5, OS id=2044
LGWR started with pid=6, OS id=1248
CKPT started with pid=7, OS id=200
SMON started with pid=8, OS id=2036
RECO started with pid=9, OS id=2012
CJQ0 started with pid=10, OS id=212
MMON started with pid=11, OS id=1924
Thu Mar 30 11:38:38 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=380
Thu Mar 30 11:38:38 2006
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:38:42 2006
The input backup piece C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB is in compressed format.
Thu Mar 30 11:39:10 2006
Full restore complete of datafile 4 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\USERS.DBF. Elapsed time: 0:00:26
checkpoint is 193065
Full restore complete of datafile 2 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\UNDO.DBF. Elapsed time: 0:00:27
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Full restore complete of datafile 3 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\SYSAUX.DBF. Elapsed time: 0:00:45
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-00600: internal error code, arguments: [krbrckhr_fail], [C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB], [83], [128], [3], [9427], [], []
Thu Mar 30 11:39:29 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:29 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:29 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_744.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Shutting down instance: further logons disabled
Thu Mar 30 11:39:29 2006
Stopping background process CJQ0
Thu Mar 30 11:39:29 2006
Stopping background process MMNL
Thu Mar 30 11:39:29 2006
Stopping background process MMON
Thu Mar 30 11:39:30 2006
Shutting down instance (immediate)
License high water mark = 1
Thu Mar 30 11:39:30 2006
Stopping Job queue slave processes
Thu Mar 30 11:39:30 2006
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:32 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:34 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=756
PSP0 started with pid=3, OS id=796
MMAN started with pid=4, OS id=836
DBW0 started with pid=5, OS id=928
LGWR started with pid=6, OS id=152
CKPT started with pid=7, OS id=924
SMON started with pid=8, OS id=932
RECO started with pid=9, OS id=1212
MMON started with pid=10, OS id=1272
MMNL started with pid=11, OS id=1296
Thu Mar 30 11:39:35 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:35 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:35 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:35 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_1144.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Thu Mar 30 11:39:35 2006
Stopping background process MMNL
Thu Mar 30 11:39:36 2006
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=10, OS id=580
MMNL started with pid=11, OS id=1288
Thu Mar 30 11:39:36 2006
ALTER SYSTEM enable restricted session;
Thu Mar 30 11:39:36 2006
alter database "XE" open resetlogs
ORA-1507 signalled during: alter database "XE" open resetlogs...
Thu Mar 30 11:39:36 2006
alter database drop logfile group 3
ORA-1507 signalled during: alter database drop logfile group 3...
Thu Mar 30 11:39:36 2006
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ORA-1109 signalled during: ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED...
Thu Mar 30 11:39:36 2006
ALTER SYSTEM disable restricted session;
Shutting down instance: further logons disabled
Thu Mar 30 11:39:37 2006
Stopping background process MMNL
Thu Mar 30 11:39:38 2006
Stopping background process MMON
Thu Mar 30 11:39:38 2006
Shutting down instance (immediate)
License high water mark = 1
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S000' to die
Waiting for shared server 'S002' to die
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:39 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:42 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
spfile = C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=1480
PSP0 started with pid=3, OS id=1484
MMAN started with pid=4, OS id=1488
DBW0 started with pid=5, OS id=576
LGWR started with pid=6, OS id=1492
CKPT started with pid=7, OS id=1496
SMON started with pid=8, OS id=1260
RECO started with pid=9, OS id=376
CJQ0 started with pid=10, OS id=824
MMON started with pid=11, OS id=244
MMNL started with pid=12, OS id=1636
Thu Mar 30 11:39:42 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:42 2006
ALTER DATABASE MOUNT
Thu Mar 30 11:39:42 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Mar 30 11:39:42 2006
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thu Mar 30 11:41:54 2006
alter database mount
Thu Mar 30 11:41:54 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-205 signalled during: alter database mount
Thanks,
Lucian

I think the relevant error from the log file is as follows
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE
There are a couple of things to consider here
Why is this install going into c:\oracle\xeprod ? If should be going into C:\oraclexe. Did you do something to change the default install infrastructure ?
Secondly - sometimes we see this unable to open file error message if some other process is reading the file at the same time as the installer is trying to install it. Anti virus software and Google desktop have been culprits to date.

Print screen not working on windows 8 pro

Hello,
Need help!!!
I have upgraded from vista to windows 8 pro. I am trying to print screen but nothing seems to work (hp pc).
I have tried the following;
Windows button +print screen
Fn+ print screen
Ctrl+ print screen
Alt+ print screen
Ctrl+fn+ print screen
When I click Windows+ print screen it takes me into the control panel- system page.
Nothing else happens when I click on the other keys.
Hope you could help me with this issue.
Thanks in advance,
Cat

Hi Cat32,
I understand you are not able to print using shortcut keys.
I was just wondering if you installed the printer on your new Windows 8 Pro.
I would like to help but I do need to know the printer that you are using.
Here is a link to drivers and software help.
http://www8.hp.com/us/en/drivers.html
Please let me know if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

IPhone not working with Windows 7. Message asks to install 64-bit version

Full error message; "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes".
I have just bought my wife a brand new iPhone 32Gb 3S for Christmas & now it's the most expensive paperweight I own. My wife has also just bought me a brand new 16Gb Nano, which also now comes up with error messages when connected, saying that it faild to load and I need to disconnect it & reconnect it. Naturally, this does not work either.
I'm running Windows 7 & the current 64 bit version of iTunes, but no matter what I do, the above error message comes up.
I have uninstalled and reinstalled iTunes, very carefully following the exact process & order as detailed by apple, with no luck.
Everywhere I look, there seems to be references to a piece of software that should exist on my computer; "Apple Mobile Device Application Support", yet this is not to be found anywhere.
I have spent over 2 hours on the phone with the Apple techies, with no results whatsoever.
Can ANYONE assist me as I'm going completely bonkers & am about to storm into the Apple store and demand my money back?

The MSCONFIG workaround requires I-tunes and I-phone code to be installed on the machine. The problem is that I-tunes will not install on XP 64-bit machines. It will install on Vista but NOT XP. MSCONFIG requires the user to allow code that can't be on the machine until it's been installed! Apple staff have confirmed this to me over the phone after I spent half a day trying to figure it out.
There is an option, which I know some Apple staff are aware of, which has been set up by a Japanese kid and can be found here:
http://sites.google.com/site/yukichigai/iphonex64
There are also a couple of 3rd party I-pod readers which, if I name them, will probably get me kicked off the list. Why the f*ck can't Apple sort this out. XP 64 bit has been around for FIVE YEARS!!!

My adobe is not working with Windows 7 it says "program not working"

My adobe does not worked with I have tried 9 & 10 both versions. It does not seem to work with Windows 7.

Adobe Reader X works very well on Windows 7.
Please give us the exact error message you're getting; "program not working" is not a message that Windows or Adobe Reader would issue.

Bootcamp bluetooth mice not working in windows 7 pro

I have an early 2008 MBP and just installed Windows 7. I cannot, for the life of me, get either of my bluetooth mice to connect in Windows 7. Both worked in XP and both work in Mac OS. The install is a clean one, not an upgrade. The mice are an older Logitech MX Revolution BT mouse and a Razer Orochi. During setup, they appear to connect, but don't. On second try, the bluetooth connection window just keeps spinning while connecting to the mouse (no system or app hangs, just no activity.) Any help would be greatly appreciated.

Thanks, alrich68.
Just before I checked your reply, I found a VERY similar post on MacRumors with a couple more steps and clarification on why the problem exists -
http://forums.macrumors.com/showthread.php?t=630024
gloss wrote
It took me two hours, but I fixed this last night.
First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add it back in later.
Boot into Windows.
Click on the Bluetooth control panel, and go to settings. Under Hardware, it probably says 'Generic Bluetooth Adapter'.
Click 'Properties' and 'Change Settings'.
Go to drivers, and 'Update Drivers'. Have Windows look on your machine to find all available drivers ('Let me pick from a list')
UNselect 'Show Compatible Drivers'.
Look for 'Apple' in the manufacturer names, then select the Apple Bluetooth Driver. Install.
Once this is done, pair your keyboard through the wizard. It should now bring up a passcode and confirm it much more quickly than before.
Once this is done, go back to Bluetooth settings and return the Drivers to 'Windows Generic'. If you leave it on the Apple drivers the keyboard will disconnect randomly and frequently.
Your keyboard will now be paired, but won't work. Go to the Device Manager, right click on the entry for the wireless keyboard.
Click on 'services'.
It should bring up a single entry for keyboard/mouse HID services. Click this and press Apply or OK. After it installs, you should be golden.
There are two issues here - one is that Mac OS seems to 'reserve' the Bluetooth device such that it won't pair correctly with any iteration of Windows while it's already paired in OSX. It works fine the other way around, however, so you need to make sure it's set up in Windows before Mac OS.
Second, there's a Bluetooth driver issue in Windows 7 such that it won't pair with the keyboard - it'll run through the steps, but the keyboard itself will not appear to actually 'get it'. Switching to the Apple drivers briefly will ameliorate this and allow proper pairing, but to actually keep the keyboard working you should use the built-in drivers.
Thanks again alrich68. Seeing the instruction worded in two slightly different manners, suddenly made sense. I now have the Mighty Mouse working as well! Work the first try!!
Chock another one up for the user base being more inventive and imaginative than the Apple engineers!!
I agree with other comments, that this solution SHOULD have been released as an official Apple Support post, and not having to rely on the user base to struggle with this problem to ultimately figure out a solution.
BTW - for those who may think apple actually reads these posts, they typically don't unless someone calls in on Apple Care and points out the problem and posts to the support tech. The forum is USER managed. So, unless someone actually calls Apple Care or sends an offical http://www.apple.com/feedback/ post, Apple does not know what happens here.
Anyway, thanks again!
Ta

My Skype not working on Windows XP Pro 2002

Salve a tutti, ho un Windows Professional 2002 XP aggiornato SP3, dalla pagina di Skype ho scaricato ieri 27/02/2014, la versione per l'XP; la schermata del sito Skype mi dice cerca il file 'SkypeSetupFull' clicca 2 volte per farlo istallare. Io eseguo ma il mio Computer risponde: "SkypeSetupFull.exe non è un'applicazione valida".
che debbo fare?
Grazie a chi può darmi risposta
Post and subsequent discussion transferred to create its own new topic.
Subject/title edited accordingly.
Please note, this Community does host an Italian language message board;
please post in the English language on this message board. Thank you.

buona sera, ringrazio per la pazienza con cui mi rispondete.
sul mio WindowsXP 2002 SP3, ora ho installato il kb942288 suggeritomi ma non ho ancora risolto il problema di installare skype: nè SkypeSetupFull né SkypeSetup_6.14.0.104.msi .
La situazione è: - il Full mi risponde: "non è un'applicazione di Win32 valida"
- il 6.14.0.104.msi mi risponde: "impossibile aprire il pacchetto di installazione contattare il fornitore per verificare che il pacchetto sia valido". questo in PROPRIETA' mi dice che per facilitare la protezione del mio computer potrebbe essere bloccato, - a fianco un bottone dice: "annulla blocco"; cosa posso fare? Il mio è un Sistema PC basato su X86!
Courtesy of Google Translate:
Good evening, thank you for the patience with which you answer me.
on my WindowsXP 2002 SP3, now I installed the KB942288 suggeritomi but I have not yet solved the problem of installing skype: neither nor SkypeSetupFull SkypeSetup_6.14.0.104.msi.
The situation is: - the Full answered me: "is not a valid Win32 application"
- The 6.14.0.104.msi answered me: "Unable to open the installer package contact the vendor to verify that the package is valid." in this PROPERTIES 'tells me that in order to facilitate the protection of my computer may be locked, - next to a button saying "undo block' what can I do? My system is a PC based on X86!
Moderator Note:
Please continue this discussion by posting in the English language,
as this is the English language neighborhood of the Community.
For your readers who do not speak Italian, it really is unfair that they
cannot benefit from Community Ambassador Ruwim's advice,
troubleshooting, and resolving your problems and issues.
Thank you for understanding!

Wireless button (f12) not working after windows 8 pro upgrade

Hi: I have seen several posts from forum members with the Broadcom wireless adapters with the same issue as you are having. I don't know if anyone was able to resolve the issue. I had suggested trying the Windows 7 broadcom driver and see if that works. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en&os=4063&product=5255857&sw_lang= If you decide to take this suggestion for action, and the driver doesn't install automatically, try manually installing it by going to the device manager, under network adapters, click on the Broadcom wireless adapter. Click on the driver tab. Click on update driver. Select the Browse my computer for software method and browse to the installation folder that was created when you ran the file. That file is located in C:\SWSetup\sp57965. Make sure the Include Subfolders box is checked and hopefully the driver will install. That is the only idea I can come up with. I am very surprised by this as Broadcom usually has good drivers that work. Paul

I am having the same problem. Bought a dv6-7138us with Windows 7. Upgraded to Windows 8 via promo offer. F12 (Wifi toggle) key worked fine. Then updated new BIOS version "F.13". Now I cannot toggle the F12 key. The Wifi is permanently turned on (which is better than having it stuck in off), but I would like my toggle ability back. Sometimes I go to the coffee shop to type something and I don't want to run down the battery constantly searching for a Wifi signal when I don't need the net. Have you guys found a solution yet? I tried putting the PC to sleep then waking it, but the Wifi key is still stuck in the on position. Thanks.

Desktop Manager not working with Windows 7 - Error message received Not Responding

Hello
The issue of not connecting with desktop manager started in May 2012. When I plug phone into computer I can see files. USB works fine as I am also able to use all ports with other usb items. I downloaded the latest download manager again today January 14, 2013 and again the desktop manager says non responsive and program will not start. I have windows 7 and the desktop manager did work in April 2012 with this computer (windows 7). Help with a solution would be great.

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Usb keyboard not working in windows xp pro sp2 , drivers not installing rig

Similar Messages

Maybe you are looking for