USB personal hotspot doesn't work anymore with 10.6.8 Snow Leopard, iTunes 11.1 and iPhone5 ios7

Ciao
I'm using iPhone 5 with ios7 and Macbookpro with 10.6.8 SnowLeopard.
After updating to iTunes 11.1and ios7 hotspot USB doesn't work anymore, wifi and bluetooth work fine.
In system network preferences iPhone usb connection is not detected.
I tried to change the kext file with the Time Machine's old one but no response!!!
Can somebody help me
Thanks

Anyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?

Similar Messages

  • Personal Hotspot doesn't work correctly

    After upgrading my iPhone 4 and iPad 2 (Wi-Fi only) to iOS 5, the Personal Hotspot doesn't work the same way as it was in iOS 4. In iOS 4, I had the Personal Hotspot always turned on on iPhone and whenever I took the iPad and wanted to connect to internet, it connected almost immediately and automaticaly to the iPhone. Now (in iOS 5), I have the personal hotspot turned on again, however, the iPad even doesn't see the iPhone wi-fi. I have to unlock the iPhone, go to the settings (change nothing!) and than the iPad see the wi-fi. It is not automatical. Personal Hotspot was the reason, why I bought only wi-fi iPad and now it doesn't work well. Do you have any idea what to do?
    Thanks

    I have similar but mind bobbling issue. Using iPhone 4s with os5.01. Turned on hotspot, on the cellular data, tried reset network setting to factory default but my hotspot signal is not discoverable by my ipad2, laptop and other wireless devices.
    Went to office, get my friend using iPhone 4 running os4.35 to turn on hotspot. Immediatedly found his hotspot in my ipad2 and the funny thing is that my hotspot signal from 4s suddenly pop up in my ipad2 wifi network, appeared in my laptop and other nokia phone without me touching anything on my 4s. Able to connect and work well. But as soon as I turn off the hotspot, it became not discoverable again when turned on. Tried resetting the network setting but nothing worked.
    The next day, the hotspot signal become discoverable again as soon as my friend turn on his hotspot. It seemed that my hotspot signal need a another hotspot signal to appear. This is ridiculous. If my friend is not around, I will never get my hotspot connected to my iPad2 or make use of this capability.
    Sounds funny but this is true and proven. It has been a week now that I keep repeating the same thing in office. I tried not turning off the hotspot after it is discoverable but it is draining off the battery faster.
    Any tips you can share....

  • Personal hotspot doesn't work.

    Hello! After install ios 7 on my iphone 4. Personal hotspot doesn't work.

    Go to Settings > Cellular > Cellular Data Network, search for Personal Hotspot re-type the APN (type the same APN you use for Cellular data provided by your carrier). It should work.

  • Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!

    Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
    Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
    When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
    Is this a known issue and is there any solution for this?

    Wow that is a new one, great find!
    I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread.  But too late, it's on the way back to Sony to get rolled back to Gingerbread.
    Too many other problems with ICS that have crippled my device.
    1) Wi-Fi Hotspot does not work anymore
    2) USB tethering does not work anymore
    3) LED notification issues for incoming SMS
    4) Dialer slow to load
    5) HD Video recording skip frames and jitter.
    6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
    If you have not done so take a look at the above features and see what you turn up.
    ~Cheers~
    Bob H
    Minneapolis, MN
    USA
    ST18a  Ray

  • AirPrint doesn't work anymore with iOS 8

    wwith iOS 8 update, AirPrint doesnt work anymore with HP printer.  Lenova pc works fine.   Any ideas what to do?

    Hello there, Bkurowski818.
    The following Knowledge Base article offers up some great recommendations for troubleshooting AirPrint issues:
    About AirPrint - Apple Support
    For best results
    Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
    AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
    Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    The information below is provided by each manufacturer and is updated once a month by Apple. You can use the Find feature of your web browser (usually Command-F) to search for a specific device in this list. If you don't see your printer or server listed, check with the printer manufacturer for more information.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Snow Leopard as PXE server doesn't work anymore with Debian Lenny

    Hello
    I was using a box with Mac OS X 10.6.2 as a PXE boot server, providing a Debian Etch installer as boot image.
    I wanted to upgrade to the Debian Lenny PXE image, but it doesn't work anymore.
    I m not sure how I can debug that. I m a sure of one thing, switching for the Debian Etch image to the Debian Lenny one triggers those kernel log messages during the PXE boot, and the host who tried to boot hanged ( a Virtualbox VM).
    +Feb 23 20:34:33 macbookpro kernel[0]: indelayed_cksumoffset: ip_len 50688 (198) doesn't match actual length 212+
    +Feb 23 20:34:58: --- last message repeated 6 times ---+
    Here is my /etc/bootpd.plist file :
    +<?xml version="1.0" encoding="UTF-8"?>+
    +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
    +<plist version="1.0">+
    <dict>
    <key>dhcp_enabled</key>
    <true/>
    <key>bootp_enabled</key>
    <true/>
    <key>netboot_enable</key>
    <false/>
    <key>Subnets</key>
    <array>
    <dict>
    <key>name</key>
    +<string>My subnet</string>+
    <key>net_mask</key>
    <string>255.255.255.0</string>
    <key>net_address</key>
    <string>192.168.0.0</string>
    <key>net_range</key>
    <array>
    <string>192.168.0.3</string>
    <string>192.168.0.6</string>
    </array>
    <key>allocate</key>
    <true/>
    <key>dhcpoption128</key>
    <string>192.168.0.10</string>
    <key>dhcpoption66</key>
    <string>192.168.0.10</string>
    <key>dhcpoption67</key>
    <string>/etch/pxelinux.0</string>
    </dict>
    </array>
    </dict>
    </plist>
    My /private/tftpboot/ tree is created from the http://http.us.debian.org/debian/dists/etch/main/installer-i386/current/images/n etboot/netboot.tar.gz archive. I used http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/ netboot/netboot.tar.gz for the Debian Lenny tree.
    So, can someone help me ?

    I disabled bootp. In verbose and debug, everything seems to go well. The option 128 isn't accepted by the daemon, i disabled it too, the TFTP server is the same server than the DHCP, so it still works.
    Here s the log when using the Debian Lenny image, almost the same than with Debian Etch image.
    +bootpd[4754]: server starting+
    +bootpd[4754]: can't open /etc/bootptab+
    +bootpd[4754]: server name macbookpro.local+
    +bootpd[4754]: interface en0: ip 192.168.0.10 mask 255.255.255.0+
    +bootpd[4754]: interface vnic0: ip 10.211.55.2 mask 255.255.255.0+
    +bootpd[4754]: interface vnic1: ip 10.37.129.2 mask 255.255.255.0+
    +0.0.0.0 ==> 192.168.0.1+
    +10.37.129 ==> link 8+
    +10.211.55 ==> link 7+
    +127 ==> 127.0.0.1+
    +169.254 ==> link 4+
    +192.168.0 ==> link 4+
    +There are 1 entries+
    +1. Subnet 'My subnet'+
    + Network: 192.168.0.0/255.255.255.0+
    + Range: 192.168.0.3..192.168.0.6+
    + Allocate: yes+
    + Lease Min: 3600 Lease Max: 86400+
    + Options:+
    + Code Length Data+
    + 66 4 c0 a8 00 0a+
    + 67 17 2f 6c 65 6e 6e 79 2f 70 78 65 6c 69 6e 75 78 2e 30+
    +DNS servers: 89.2.0.1 89.2.0.2+
    +destination address 255.255.255.255+
    +---------------- Client Request --------------------+
    +op = BOOTREQUEST+
    +htype = 1+
    +flags = 8000+
    +hlen = 6+
    +hops = 0+
    +xid = 678070622+
    +secs = 4+
    +ciaddr = 0.0.0.0+
    +yiaddr = 0.0.0.0+
    +siaddr = 0.0.0.0+
    +giaddr = 0.0.0.0+
    +chaddr = 8:0:27:6a:89:5e+
    +sname =+
    +file =+
    options:
    +Options count is 8+
    +dhcpmessagetype (uint8): DISCOVER 0x1+
    +parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
    +maxdhcp_messagesize (uint16): 0x4ec+
    +option_97 (opaque):+
    +0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
    +0010 6e n+
    +option_93 (opaque):+
    +0000 00 00 ..+
    +option_94 (opaque):+
    +0000 01 02 01 ...+
    +vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
    +end (none):+
    +bootpd[4754]: DHCP DISCOVER [en0]: 1,8:0:27:6a:89:5e+
    state=INIT
    +bootpd[4754]: default route added as router+
    +bootpd[4754]: default dns servers added+
    +Sending: DHCP OFFER (size 303)+
    +bootpd[4754]: replying using broadcast IP address+
    +bootpd[4754]: replying to 255.255.255.255+
    +=================== Server Reply =====================+
    +op = BOOTREPLY+
    +htype = 1+
    +flags = 8000+
    +hlen = 6+
    +hops = 0+
    +xid = 678070622+
    +secs = 0+
    +ciaddr = 0.0.0.0+
    +yiaddr = 192.168.0.3+
    +siaddr = 192.168.0.10+
    +giaddr = 0.0.0.0+
    +chaddr = 8:0:27:6a:89:5e+
    +sname = macbookpro.local+
    +file =+
    options:
    +Options count is 9+
    +dhcpmessagetype (uint8): OFFER 0x2+
    +server_identifier (ip): 192.168.0.10+
    +lease_time (uint32): 0x14dd5+
    +subnet_mask (ip): 255.255.255.0+
    +router (ip_mult): {192.168.0.1}+
    +domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
    +tftpservername (ip_mult): {192.168.0.10}+
    +bootfile_name (string): /lenny/pxelinux.0+
    +end (none):+
    +bootpd[4754]: OFFER sent <no hostname> 192.168.0.3 pktsize 303+
    +bootpd[4754]: service time 0.007299 seconds+
    +destination address 255.255.255.255+
    +---------------- Client Request --------------------+
    +op = BOOTREQUEST+
    +htype = 1+
    +flags = 8000+
    +hlen = 6+
    +hops = 0+
    +xid = 678070622+
    +secs = 4+
    +ciaddr = 0.0.0.0+
    +yiaddr = 0.0.0.0+
    +siaddr = 0.0.0.0+
    +giaddr = 0.0.0.0+
    +chaddr = 8:0:27:6a:89:5e+
    +sname =+
    +file =+
    options:
    +Options count is 10+
    +dhcpmessagetype (uint8): REQUEST 0x3+
    +requestedipaddress (ip): 192.168.0.3+
    +parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
    +maxdhcp_messagesize (uint16): 0x4ec+
    +server_identifier (ip): 192.168.0.10+
    +option_97 (opaque):+
    +0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
    +0010 6e n+
    +option_93 (opaque):+
    +0000 00 00 ..+
    +option_94 (opaque):+
    +0000 01 02 01 ...+
    +vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
    +end (none):+
    +bootpd[4754]: DHCP REQUEST [en0]: 1,8:0:27:6a:89:5e+
    SELECT
    state=SELECT
    +bootpd[4754]: default route added as router+
    +bootpd[4754]: default dns servers added+
    +Sending: DHCP ACK (size 303)+
    +bootpd[4754]: replying using broadcast IP address+
    +bootpd[4754]: replying to 255.255.255.255+
    +=================== Server Reply =====================+
    +op = BOOTREPLY+
    +htype = 1+
    +flags = 8000+
    +hlen = 6+
    +hops = 0+
    +xid = 678070622+
    +secs = 0+
    +ciaddr = 0.0.0.0+
    +yiaddr = 192.168.0.3+
    +siaddr = 192.168.0.10+
    +giaddr = 0.0.0.0+
    +chaddr = 8:0:27:6a:89:5e+
    +sname = macbookpro.local+
    +file =+
    options:
    +Options count is 9+
    +dhcpmessagetype (uint8): ACK 0x5+
    +server_identifier (ip): 192.168.0.10+
    +lease_time (uint32): 0x14dd5+
    +subnet_mask (ip): 255.255.255.0+
    +router (ip_mult): {192.168.0.1}+
    +domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
    +tftpservername (ip_mult): {192.168.0.10}+
    +bootfile_name (string): /lenny/pxelinux.0+
    +end (none):+
    +bootpd[4754]: ACK sent <no hostname> 192.168.0.3 pktsize 303+
    +bootpd[4754]: service time 0.001884 seconds+

  • [Solved] Alac doesn't work anymore with Gstreamer0.10

    Apple Loseless Audio Codec support seems to be broken for me in the 0.10 branch of gstreamer. Before I was able to play ALAC files in rhythmbox and banshee but it does not work anymore. I think the support for ALAC files is integrated in the package gstreamer-ffmpeg.
    This problem does't seems to occur in the 1.0 branch of gstreamer as ALAC files work with Totem and it also work with vlc which use dirrectly ffmpeg.
    Does someone have the same problem or is it a problem with my system ?
    I tried to reinstall gstreamer0.10 and all plugins but it didn't solve the problem.
    Last edited by sedutom (2013-04-22 14:18:39)

    Put as solved, it works back with the new version of rhythmbox
    Last edited by sedutom (2013-04-22 14:19:59)

  • IWork doesn't work anymore with MacOSX Lion...

    I had iWork '09 on MacOSX Snow Leopard and than I choose to install lion and was all right than I reinstall Lion because was really slowly. I didn't find all the iLife '11 and iWork. With iLife'11 I reinstall it from the TimeMachine Backup but I tried with iWork'09 and when I open Pages, Numbers or Keynotes there is a message that says:
    Pages cannot be opened because of a problem.
    Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any avaiable updates for the application of Mac Os X.
    I tried to download the last update but nothing change, and if I wold install it again would mean t buy again all 3 of them....
    Thanks, Luca

    Luca - uninstall iWork by using Yvans script.
    Go to Yvans iDisk :
    <http://public.me.com/koenigyvan>
    Download :
    For_iWork:iWork '09:uninstall iWork '09.zip
    Expand the archive and run the script.
    Install iWork from the dvd you have.
    Then do the Software update check and install the updates. Otherwise it will not work.

  • Will Dreamweaver CS4 work properly with 10.6.1 Snow Leopard?

    Hello
    Can anyone tell me please, if Adobe Dreamweaver CS4 work properly with my MacBook OS 10.6.1 Snow Leopard? Adobe state "Mac OS X v10.4.11–10.5.4" in the system requirements, but does this mean, in practise, that Dreamweaver will not work properly with Snow Leopard?
    I have tried to find info about this here, but have spend ages wading through masses of complaints about various applications crashing for people after they upgraded to 10.6.1 Snow Leopard. Personally, touch wood, I've had no problems with Snow Leopard, but I only really use it for Internet surfing and word processing (my work, music stuff on Logic Pro 8, is done on my Mac Pro which came with Leopard and which I am NOT upgrading - not yet!).
    I have also attempted to get an answer from Adobe - I 'phoned their "Pre-sales enquiries" number 0800 028 0148 (in the UK) and spoke to someone who sounded as if she was on the moon and who clearly had absolutely no idea what I was talking about. I gave up with them! They didn't give an email address to ask on.
    I'd be very grateful if anyone can give a clear, authoritative answer please - if possible.

    I've been a Mac user since 1987 and have never upgraded the OS too soon after a new version was launched. Any new OS, like new houses, will have a 'snagging list' - unforeseen problems that arise and need to be sorted before your purchase is truly habitable and functions as expected.
    But the stability of OS X 10.5 paved the way for my lapse of judgement when I upgraded to Snow Panther last week, while its compatibility with some major software is still clearly too buggy.
    I've been using Dreamweaver (DW) CS4 successfully on OS X 10.5 for some time. Since installing OS X 10.6.1 I now have problems with DW, which I've alerted Adobe to.
    When using Design View in DW CS4, any formatted text - from html tags to css tags - disappears from the Design view. The code appears correctly in the Code window and even if you highlight text that has coding attached in Code view - eg text with a url link attached - the Design view continues to ignore it and removes the text from its view. I've discovered that my heading tags (h1, h2, etc) all make the text disappear in Design view in a way that would be the envy of members of the Magic Circle! The only thing that seems to get through is text that is surrounded by paragraph tags.
    Thing is that 'Preview in Browser' shows the page correctly (except in Opera, which I've only installed since installing Snow Leopard, so I can't say how this displayed in the previous OS versions).
    Also when I upload the site to the server it all seems to display more or less as it should.
    So currently it seems that DW CS4's Design view is no longer WYSIWYG! Expect to find lots of text hidden in Design view and have to use Code view much more.
    It would be nice to think that Apple and Adobe would talk to each other and work it out between them.
    re: Dreamweaver, I'd check back to Adobe.com regularly to see when they upgrade the OS requirements to 10.6.1 (I hadn't spotted before I bought Snow Leopard that they only go up to 10.5 in their OS recommendations).
    My advice if you're thinking of upgrading to Snow Panther: delay it until it more of it works compatibly with your major applications. Check the OS spec from each software manufacturer first. Meanwhile I'll just have to wait patiently for Apple & Adobe to get their act together...
    Message was edited by: bcmartin

  • Known issue: 5th gen ipods do not work reliably with 10.6.1 (snow leopard)

    I just got off the phone with Apple support - there is a known issue preventing 5th gen ipods from connecting to Snow Leopard computers.
    I can confirm that it's a 10.6 issue - everything worked fine on 10.5.8 with iTunes 9, but right after the upgrade, no connect (not even in Disk Utility). Apple's working on a fix, but no ETA yet. My 1st gen touch works just fine.
    If you attempt to connect, it'll hang Disk Utility and may require a hard-boot to reset everything.
    So we just need to be patient.

    yeeahhhhh... I just plugged my ipod classic 5th gen, 30g into my brand new macbook pro... and it doesn't show anything up. Didn't even aweknowledge the ipod as a device. and worst of all... it said it was connected so i couldn't take it out but i had to since it wasn't doing anything so i unplugged it and now... it froze...
    If i reset my ipod or wait till the batteries run out and then connect it to my pc. will it work still?

  • Iphone USB/Dock autoradio doesn't work anymore

    Hi,
    After upgrading my iphone 4 to the latest ios6, i just went crazy about the usb dock ipod fonction of my iphone 4 in my car: i just can't use next/prev... the song just continue until the end and the iphone get stuck in pause !
    I saw the same problem with bluetooth streaming from another users...but i'm using the usb dock connector (with a pioneer 8300 BT autoradio)...it's just crazy, doens't the ios6 went from a couple of month of beta testing before it was released ?
    If it's a bug can we expect a relase date for a...patch ? because it's just unusable anymore in a car...and i'm seriously thinking about downgrading to the previous ios...if it's possible of course.
    Thanks for your reply,
    Cya
    Seb
    Bonjour,
    Après avoir mis à jour mon iphone 4 avec la version 6 d'ios, je me suis apercu ce WE que les fonctions avancer/reculer ne fonctionnent plus sur l'autoradio. J'ai vu que d'autres utilisateurs rencontraient les mêmes problèmes avec le stream bluetooth mais j'utilise pour ma part le connecteur USB qui utilise le connecteur dock de l'iphone...
    Je n'arrive pas a comprendre comment un bug comme celui-là à pu passer au travers de vos beta...
    Avez-vous une date pour un correctif qui résoudrait ce dysfonctionnement car la fonction ipod est juste inutilisable en l'état en voiture...ou alors si c'est possible de downgrader en ios 5.1 par exemple ?
    Merci
    Sebastien

    had the same problem. washed my hands. solved

  • My Gmail account doesn't work anymore with Mail (the box is empty even after syncronization)

    Since the update of Mavericks my Gmail account bugs a lot ! (also with the update for Gmail).
    I tried to "re-build" the mail box, since it didn't work. And since I did this my Gmail box is empty, like I have no emails... I tried to sync but nothing happens.. I deleted and put again the account but nothing...
    Can anybody help me with this?
    Thanks a lot !

    There is an update available for Mail/Mavericks. Did you try updating.
    "Mail Update for Mavericks"
    http://support.apple.com/downloads/

  • Digi 002 rack doesn't work anymore with Logic Pro 7

    Any help much appreciated: Like an idiot, I "upgraded" to Pro Tools 7 software from 6.9.2. Logic 7.0.1 had been running fine with the 002 as my audio interface when I had Pro Tools 6.9.2 installed.
    But under Pro Tools 7, suddenly everything sounded terrible. Anytime I played my keyboard, either triggering Sculpture, the EXS24, playing audio, any instrument, it sound like ugly static.
    So I uninstalled Pro Tools 7, and reinstalled 6.9.2. That didn't help, which surprised me, because I thought I "went back" to my previous setup. But something must have changed. I did go through some of the forum's troubleshooting tip. I repaired permissions, I trashed Logic and Pro Tools preferences, I verified my hard disk, checked ram, etc.
    So now I'm stumped. Anyone have anything I should try?
    Thanks much,
    Jim

    Maybe you need to go to Digidesign.com and find the latest core audio driver and install it ?

  • Why is it photoshop CS4 worked flawlessly with my fonts in Snow Leopard, but are making CS6 crash in

    I transferred all of the fonts starting with 'A' into font book and all of them had either a yellow or red dot next to them. They all worked fine in photoshop CS4. What gives? Will Adobe fix this and make them compatable? I have a fortune invested in fonts I'm not about to toss. What are Adobe and Apple going to do about this? Who's issue is it really? I am not the only one having his issue.
    Thank you for any input.

    And what fonts exactly? If you're using fonts from the stone age this may be unavoidable. Beyond that a single "bad" font can drag down Adobe apps, which does not necessarily have to be the one you use currently. It's mere existance and PS stumbling over it when populating the fonts list would be enough... The rest is in the details, but as always, start by removing all your fonts and adding them only back on an "as needed" basis. and if you realyl have that many fonts, using a font manager might be advisable to keep lists neat and tidy...
    Mylenium

  • I am running OSX 10.5.8 on a 2008 Imac with  Intel Core 2 duo am I compatible with OSX 10.6 snow leopard, much less Lion and Mountain Lion?

    I want to link all my apple products so I can use icloud with ease but I am running OSX 10.5.8 on a 2008 imac with intel core 2 duo and not sure it's going to be beneficial or compatible. Is my desktop really just an external hard drive alreadt in 5 years? I just purchased a mac book pro 2012 and also have a 3Gs iphone I just want to have a happy apple family ; )

    Your computer is compatible with all of those OSes, but may need more RAM to run 10.7 or 10.8. As the RAM requirement is the same for both 10.7 and 10.8, don't bother with 10.7 unless you're using software incompatible with 10.8.
    (71851)

Maybe you are looking for