USB port not being shown

I picked up a Toshiba Satellite 325 CDS at a garage sale and plan to use it for Ham radio and electronic hobbyist pursuits. I'm running Windows 98SE. Everything works well except the USB 2.0 port, which is not being recognized in the Windows Explorer listing of available drives. A memory stick inserted in the drive does not show up. I have deleted the USB and let it be reinstalled, to no avail. What proceedures can I follow to identify the problem?
piwi

Hello sqvic,
The following articles provide some useful tips and information that can help get your USB ports working.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
USB: Troubleshooting Error Messages
http://support.apple.com/kb/TA25618
Cheers,
Allen

Similar Messages

  • HT4619 MEMORY STICKS IN USB PORTS NOT BEING RECOGNISED

    I am setting up a new iMac and uploading images and videos from other computers. My iMac will not recognise memory sticks inserted into the USB ports. Can anyone assist please?

    Thank you for replying. Both new sticks were used first in windows based computers at work and I tried to download images on my home iMac. I have been able to connect iPad and iPhone through the USB ports.
    I have also found that some music CD's have not been recognised in the DVD/CD slot.
    I have a lot of learning to do.

  • USB port not being recognised

    Hello,
    When I plug in my mouse, the light leds of the mouse light up, however my mac does not recognise it (it doesnt work)
    The same goes with a USB flashstick, once i plug it in either of the 2 ports, the USB flashes, however my mac does not regonise it.
    It's been going on for a long time, resetting does not work as well as the PRAM reset
    Does anyone have any solutions?

    Hello sqvic,
    The following articles provide some useful tips and information that can help get your USB ports working.
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    USB: Troubleshooting Error Messages
    http://support.apple.com/kb/TA25618
    Cheers,
    Allen

  • Touchsmart TX-2 fingerprint scanner and USB ports not working

    Hi everyone,
    Please forgive me if this is in the wrong spot.
    Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
    I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
    All advice really welcome and very much appreciated!
    Thanks in advance

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

    2nd generation iPod not being shown on iTunes 11.4
    How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

    Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
    Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
    Hope this help

  • PDF Export Options not being Shown

    Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
    The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
    Pleae advise best course of action at this point.

    before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

  • When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

    when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

    All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
     Cheers, Tom

  • In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

    In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
    How to display the tabs in shared views also.
    I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

    Please update me if you can find any way to achieve this in BPM workspace

  • Split x2 problem with USB ports not working

    My computer is somewhat new and this problem has been happening since I first got it.  I couldn't find anything about this problem here or elsewhere online.
    When I plug anything into either USB port (I've tried my phone and an external harddrive) the computer like sort of recognizes it on and off.  When I plug in my phone the computer beeps at random every several seconds and doesn't recognize it.  The external hard drive was sort of recognized but only on and off and I couldn't move things from it to my computer because it wouldn't stay connected long enough.  It's literally like every 2-3 seconds it recognizes the USB thing, changes it's mind and then recognizes it again, etc. forever.
    I haven't had a chance to test the SD card slot or the HDMI port yet.
    Sometimes the mouse freezes also, I'm not sure if this is the same problem (related to connection between the tablet and the keyboard parts) or if these are separate problems.  It seems to be happening less often and goes away if I wait for a moment.  Still annoying but the USB ports not functioning is a more urgent issue.
    I need help, is there a way to fix this or is something faulty with my computer?

    Hi Purple24,
    I understand you are having issues with USB on your HP SplitX2. Here is a document on general troubleshooting.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03327635
    I would be happy to assist if needed. Please let me know what is your model number? Here is a link that will help you find that out.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • 2010 i5 MBP USB Ports Not The Same?  Griffin iMic Issue

    I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
    I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
    Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.

    Hi WebBrowser2,
    As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working).  There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
    For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
    And I am hoping- it will assist you in the same way as it assists me.

  • Non-Admin not being shown update button on XP

    Non-Admin users on XP are not being shown the option to trigger an update.
    The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
    When a new update is available a link to the download page is shown in the About box rather than a button to start the update.

    That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.

  • Planned Order for a Product not being shown

    Hi Experts!!
    I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
    Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
    I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
    Please help me out. Your help is highly appreciated. Thanks a lot!!

    Hi Srinivas,
    With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
    I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
    As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
    and COMMIT_CONTROL(should be 'E').
    Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
    Thanks,
    Santosh KB.

  • TS1468 Not being shown in recently release album

    I recently submitted one album. This is not being shown in recently release album. What we need to do my album to  be displayed in iTunes when user selects recently released albums.

    Hi Bhakti,
    The operation 01 is create, this means the mapping records are stuck in a create operation, i.e. something stopped the original mapping records creation and left an inconsistency in the catalog mapping tables.
    I would suggest the following:
    De-assign the mapping for the affected categories in the catalog authoring tool, once de-assigned, also execute the 'Map Content' selection and save/exit.
    Then run report /CCM/CLEANUP_MAPPING in test mode to check for orphaned items or invalid mapping entries. If inconsistencies are found in test mode, run this again with the test flag removed.
    Finally - re-map the categories again and perform content mapping. The items should then exist in the procurement catalog.

  • New Leave Request not being shown in UWL

    Hi ,
    I have an issue in which when manager tries to approve a  leave request from UWL ,in the Pop up i,e in Request Waiting for approval" table the latest requests are shown but the same request are not being shown in the UWL. 
    I checked in SWI5 for the user and whatever leave requests are shown in popup are there for the user but the same is not updated in UWL.The user has refreshed the UWL but still it didnt show the new leave requests
    I dont want to reregister the webflowconnector in UWL configuration as we generally use reregister to register a new task in the UWL .
    Can someone please help me in resolving the issue.
    Thanks,
    Satish Kumar

    Hi Siddharth,
    Thanks for your reply.
    DYNPARAM parameter value as suggested in the note 1140959  is already maintained against the tasks  TS12300097 ,TS12300116.
    we have done Refresh from the UWL iview but still its not showing the latest Leave Requests but it is coming in the popup window when one of the existing leave requests in UWL is selected.
    Thanks,
    Satish Kumar

  • MSI GAMING 5 - ALL USB ports not working

    hello
    how are you every one 
    i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
    Mouse and keyborad work in bios but if the system run don't work ! and trun off
    and all usb devices
    in safe mod work 
    rellay i don't know where is the problem !
    CPU : Intel Core i5-4690K
    M.B : MSI Z97 GAMING 5
    RAM : G.Skill Ripjaws X 8GB DDR3 Kit
    GPU : Gigabyte GeForce GTX 970 G1 GAMING
    SSD:Corsair force LX 256 GB
    HARD: Seagate Barracuda 1 T.B 7200 RPM
    CPU COOLER : Cooler Master Hyper 212 Evo
    PSU : Cooler Master GM-Series 750 watt
    CASE : NZXT Phantom 410
     Thank you

    Quote from: Nichrome on 28-January-15, 00:18:47
    Hi,
    What about if you try to install drivers from your product's page?
    http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
    And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
    thank you
    i just remove USB3 controller driver and work 
    thank you all :D

Maybe you are looking for