Usb to Ethernet  adapter doesn't work? AX88772B

I don't know how to make a connection with Internet with RJ-45 cable with the usb adapter.
I have MBA. Lion 10.7.5
Now I need to connect MBA by RJ-45 cable with usb adapter (asus AX88772B)
MBA see the adapter (even without an ethernet cable).
I also did download drivers from here http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=105;71;101&PLine=71
I read the instruction, and I've done 3 steps on the page 4 exept these one's:
(4)  Set the permission access mode of Apple’s default driver.
(5)  Update the access and modification times of ASIX’s AX88772B/772A/760/772 or AX88178 driver.
But i don't know how to do this.
In the system report is always written this:
AX88772B:
  Product ID:          0x7e2b
  Vendor ID:          0x0b95  (ASIX Electronics Corporation)
  Version:           0.01
  Serial Number:          09EF51
  Speed:          Up to 480 Mb/sec
  Manufacturer:          ASIX Elec. Corp.
  Location ID:          0xfd120000 / 4
  Current Available (mA):          500
  Current Required (mA):          Unknown (Device has not been configured)NO
But still I can't make an Usb to Ethernet connection in system preferenes, nothing written about it there.

Hmm. Well I tried rebooting with wifi off but that didn't fix things for me. Would you mind sharing what your System Information says under Thunderbolt? This is what mine looks like:
MacBook Pro:
  Vendor Name:          Apple, Inc.
  Device Name:          Macintosh
  UID:          0x0001000D1290C120
  Firmware Version:          11.1
  Port:
  Status:          No devices connected
  Link Status:          7
  Link Controller Firmware Version:          0.11.4
  Port:
  Status:          Connected
  Link Status:          2
  Link Controller Firmware Version:          0.11.4
Thunderbolt to Gigabit Ethernet Adapter:
  Vendor Name:          Apple, Inc.
  Device Name:          Thunderbolt to Gigabit Ethernet Adapter
  Vendor ID:          0x1
  Device ID:          0x8003
  Device Revision:          0x1
  UID:          0x000100020059EBB0
  Apple Serial Number:          DTN224606LWDWKHAX
  Route String:          3
  Firmware Version:          5.5
  Port:
  Status:          Connected
  Link Status:          2
  Port Micro Firmware Version:          0.0.8

Similar Messages

  • K7N2 Delta-ILSR - USB to Serial Adapter Doesn't Work!

    Is anyone aware of an error such as the follows with the K7N2 Delta-ILSR?
    I am trying the use a USB to Serial Adapter, namely the a Prolific PL-2303.
    However, my PC does not seem to like it, nor does it what to cooperate with it at all.
    On one occasion i have managed to get the device to show in the Manager window with the exclamation mark,
    and upon checking its properties it told me: Prolific This device cannot start. (Code 10).
    I have un-installed all my system USB drivers and the device drivers, and reinstalled them, but again, no matter what i do i cannot get it to work.
    Any ideas peeps?
    Cheers, G.

    Don't think it will this time, but on occassions booting into SafeMode and removing possibly half-installed copies of USB devices from Device Manager has helped.
    Is this what you are looking for, Henry?
    http://www.prolific.com.tw/eng/downloads.asp?ID=33
    "Note: Please take notice of the installation order. First, run the InstallShield wizard,
    and then plug in the USB to Serial adapter"
    ...How many times have I said that, if a USB device needs a driver you install that before attaching the device!?

  • Thunderbolt to Ethernet Adapter doesn't work with Retina MacBook Pro

    I can't seem to connect to Ethernet with my Retina MacBook Pro. I bought an adapter and when I plugged it in, the network setup assistant showed that I was connected to the internet but my web browsers (Safari, Firefox and Chrome) couldn't connect, nor could any other programs (like Mail). The error message said that my computer was not connected to the internet, which did not match what Network Diagnositcs said. After a phone call with Apple Support, I had a replacement adapter mailed to me. With the new adapter, my computer now says that it is connected to the internet and I even have an IP address, but programs still can't connect and I get an error message saying the DNS lookup failed. This happens even when I manually enter the DNS server. I have already tried running the Thunderbolt software update 1.2.1 as well as the recent Thunderbolt firmware update, but the installer says they are not compatible with my computer. The problem occurs for both Thunderbolt ports. Is anyone else having this issue? I have no problem connecting to WiFi, so my temporary work around is using internet sharing on my old MacBook, which can connect to the ethernet connection in my apartment with no problems.

    Hmm. Well I tried rebooting with wifi off but that didn't fix things for me. Would you mind sharing what your System Information says under Thunderbolt? This is what mine looks like:
    MacBook Pro:
      Vendor Name:          Apple, Inc.
      Device Name:          Macintosh
      UID:          0x0001000D1290C120
      Firmware Version:          11.1
      Port:
      Status:          No devices connected
      Link Status:          7
      Link Controller Firmware Version:          0.11.4
      Port:
      Status:          Connected
      Link Status:          2
      Link Controller Firmware Version:          0.11.4
    Thunderbolt to Gigabit Ethernet Adapter:
      Vendor Name:          Apple, Inc.
      Device Name:          Thunderbolt to Gigabit Ethernet Adapter
      Vendor ID:          0x1
      Device ID:          0x8003
      Device Revision:          0x1
      UID:          0x000100020059EBB0
      Apple Serial Number:          DTN224606LWDWKHAX
      Route String:          3
      Firmware Version:          5.5
      Port:
      Status:          Connected
      Link Status:          2
      Port Micro Firmware Version:          0.0.8

  • Thunderbolt Gigabit Ethernet Adapter doesn't work

    Just plugged in a Thunderbolt Gigabit Ethernet Adapter into MacBook Pro 15" 2.7GHz i7, OS 10.7.4
    It is recognized correctly by System Profiler, but not in System Preferences - the Adapter just isn't shown in Network.
    What is still needed?
    Thanks for Answers!
    DoktorMac®, Bern, Switzerland

    Got this update:
    All Thunderbolt-equipped Mac computers support this adapter. This adapter requires OS X Lion v10.7.4 or later. Thunderbolt-equipped Macs released prior to June, 2012, require the installation of Thunderbolt Software Update 1.2.1 to use this adapter.

  • How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Title says it all:
    How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Hi Auracles1,
    Here's a pretty discussion regarding wireless printing with this device and a Mac.
    http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
    I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

  • I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. Tried restarting the mac then only VGA adapter worked.

    I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
    I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.

    Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
    Thanks again for your post. Cheers from Bonnie Scotland.

  • Third-Party USB to Ethernet Adapter not working since 10.8 updated

    Hi I have a third-party USB to Ethernet adapter. Since the update of mountain lion the adapter does not work.
    Is there a driver or something I can do to make it work?
    Thanks

    USB not so good, this very good.
    Thunderbolt to Gigabit Ethernet Adapter

  • Satellite L770 - ethernet adapter has stopped working

    HI
    I have three laptops all connectable to my home hub, but I seem to be having serious problems with the latest model, the L770-13D. The signal strength has never been as good as the older models and just recently the Ethernet adapter has stopped working. I've updated drivers on both adapters but it hasn't made any difference. I've just recently upgraded my connection and I'm wondering whether the Ethernet adapter is not correctly configured since it was working alright prior to the upgrade.
    I've also tried just about every test that I can do - The Toshiba config doctor returned a FAIL on the hardware check I did, but the device manager reports that both network adapters are working OK. Also, the troubleshooting of the wireless adapter reports that there 'may be a problem' The evidence seems to be pointing towards a hardware problem with this laptop.
    Any thoughts?

    HI Dr Lamp,
    No I haven't tried that probably because I wouldn't know how to do it. I have a full recovery image on the data drive but I'm not comfortable with making any changes to the OS in case I mess things up. I've also got a recovery flash drive. Really, I'm out of my depth when it comes to making these sort of changes - I just thought that there may be something very simple that I'd overlooked. The machine is still under warranty, so I'll probably take it to a local computer specialist for diagnosis before involving Toshiba. If it's more than a software problem, they should earn their fees by repairing it. If you involve them and it isn't a hardware problem, they will bill you for about 80 plus carriage, so I'm naturally reluctant to do that. Also, you have to hang about waiting for delivery and collection. It may better to buy a USB/LAN adapter for about 20. Thanks for reply, anyhow.

  • Unusual issue with tag engine and BELKIN USB to Ethernet adapter??

    I have an .scf file with 72 tags and several tag groups in it. If I open the tag engine without the usb adapter, I can read the tag group names with the get group list.vi. The tag group names are listed in black letters when wired to an indicator. When I plug in the usb ethernet adapter, immediately the group tag names are greyed out in the indicator without even running the vi. If I put a tag constant on the block diagram and try to select a tag name with the pointer, no tagnames pop up. It worked yesterday and my IT. department sent down a shockwave and flash5 update download when I booted up this morning. anyone have any ideas??

    I am still seeing the tag groups disappear when I start the tag engine on labview7.0. I have several other programs running at the same time, KEPWARE, PROWORX NXT, USB to ethernet adapter. This is on a win2000 machine.
    Attachments:
    op50_head_press_force_status_rev2.vi ‏320 KB
    Process_Sta2_probe_results.vi ‏42 KB
    op50_head_version2.scf ‏53 KB

  • My iphone 5s with lightning to 30 pin adapter doesn't work in my audi A6 to play music, only to charge the phone. is there a fix for this?

    my iphone 5s with lightning to 30 pin adapter doesn't work in my audi A6 to play music, only to charge the phone. is there a fix for this?

    Is the adapter the genuine Apple product or a copy

  • My magsafe adapter doesn't work, how can i solve this problem?

    my magsafe adapter doesn't work, how can i solve this problem?

    You can get a 60W power adapter for about $20 on eBay http://www.ebay.com/sch/i.html?_trkparms=65%253A1%257C66%253A2%257C39%253A1&rt=n c&_nkw=macbook+power+adapter&_dmpt=Laptop_Adapters_Chargers&_sticky=1&_trksid=p 3 286.c0.m14&_sop=12&_sc=1

  • WLAN adapter doesn't work on my Satellite A200

    Hi,
    My WLAN adapter doesn't work under Vista. If I press FN + F8 nothing happens. The wireless-communication is still offline.
    What can I do?
    Details:
    Typ: Atheros AR5008X Version: 7.2.0.164
    Notebook Satellite 200
    PSAE6E
    Please help me!
    Thx in advance!
    Phil

    BIOS bug? I dont think so
    Firstly you should ensure that this is not a hardware issue. In such case insert the Toshiba Recovery CD and reinstall the OS on this unit. This will set the notebook to the factory settings. Note; this would format the whole HDD.
    After new installation, you have to enable the WLan switch at the notebooks side and then you could use the button switch FN+F8 to select the WLan.
    I presume you have already configured your Wlan router. So the same settings like SSID, WLan encryption, etc must be set on the notebook too.

  • HELP: USB to Ethernet Adapter

    Hello Everyone. I have a USB to Ethernet adapter for my Macbook Pro Retina. After plugging it into an ethernet cable and connecting everything, my computer still isn't reading it. I am wondering if there is an install driver or what or if I am doing something wrong. Thanks you for your help.

    Brb8910,
    what is the brand and model of your USB-to-Ethernet adapter? Does the manufacturer claim that it is compatible with your installed version of OS X?

  • Apple USB to Ethernet Adapter??

    Can you use the Apple " usb to ethernet " adapter with the airport express?

    The USB port on the AirPort Express will only support a compatible printer, so using a USB to Ethernet adapter would not accomplish what you want to do.
    If you add a simple 5 port Ethernet switch to the AirPort Express, one port will be used to connect to the Express with an Ethernet cable. You will then have 4 Ethernet ports available for devices.
    Any major electronic/computer store will have what you need. Netgear or Cisco-Linksys make quality products.

  • I need a USB/FireWire ethernet adapter

    About 6 months ago my ethernet port was fried when a lightning bolt sent a surge through the wire. Since then i have been using my family's wireless network, but now that I am back in school and away from home, i don't have that luxury. So, i've been looking for a Mac compatible USB/FireWire ethernet adapter and have had no luck. If anyone knows where I can find one, let me know.

    Hi Kllru,
    Welcome to the Discussions.
    The following link has info on compatible adapters as well as a driver for OS X.
    http://www.sustworks.com/site/newsusbethernet.html
    John

Maybe you are looking for

  • The database error text is: ORA-01843: not a valid month

    I am trying to use a date field as a query filter and I keep getting the following error: A database error occurred. The database error text is: ORA-01843: not a valid month. (WIS 10901). When I remove the query filter and run the query it works as e

  • I just downloaded acrobat pro DC for the trial version and it won't open

    I downloaded the trial version of acrobat pro DC on the 30 day trial. It installed fine. But when I click on it it will not open. If I try to open it from clicking on a pdf file it won't open either. I only downloaded this, not the whole adobe suite.

  • Copying text in automatic line items created

    Dear Experts, When using tax code for calculatin tax we enter text for our reference which was automatically updated in sencond/GL line item but not updated in tax GL. I cannot enter it manually because third line item is not visible it only appers w

  • Authorisation Question

    I have some music purchased from the music store and downloaded to my PowerMac G4. Having bought a new PowerMac G5 and used the setup assistant to firewire my home folder over, I was asked to authorise my new G5 to play. Fair enough - but the resulti

  • Making a writable acrobat page

    I have adobe acrobat proffessional 7.0. Does anyone know how to save it so I can email it to someone and they can write on it? I know that when I visit irs.gov and pull up the W-9 it allows me to write in the fields and save it. I have a form that wa