USB Wireless Dongle Issues

I have a TP-Link TL-WN727N wireless dongle, which uses the rt2800usb driver. Unfortunately, I am having issues with it and it basically doesn't work at all. It will work for a minute before failing and after that, it won't connect at all.
I have no idea why it's not working, so can anyone help me?

bump

Similar Messages

Sagem XG-703A USB Wireless Dongle Install Problem

Hi,
First post and new on linux ....
Have done a install of Archlinux 2009.08 via CDROM on an old pc
motherboard:Gigabyte 6BX7+
CPU:Celeron 500
Storage:Hitachi 4g CF
I have a Sagem XG-703A USB Wireless Dongle plug on
But I don't know what to do next...
what I've done:
1.uninstall ndiswrapper
2.download firmware http://jbnote.free.fr/prism54usb/data/f … .5.8.0.arm ,and rename it as "isl3887usb_bare" ,copy it into /lib/firmware
3.add "ndiswrapper" into mod_blacklist and "p54usb" into modules
4.reboot
but it doesn't work still
lsusb
Bus 001 Device 005: ID 0cde:0008 Z-Com Sitecom Wireless Network Adapter 100G+ WL-125
Bus 001 Device 004: ID 1043:8012 iCreate Technologies Corp.
Bus 001 Device 003: ID 0000:0e01
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:BA:B3:03:64
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0xe400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Well thats a reallt weird problem...
From what I understood you need ndiswrapper to run the wireless card. Is it posible to do it natively. Its been a while since I've used ndiswrapper but it seems the kernel is already recognising the wireless card. Uninstall ndiswrapper and see if the system does load it manually. Otherwise I would recomend you post this on the ndiswrapper forums.

USB wireless mouse issues

Hi, I have been having issues with my MBP in regards to my USB wireless mouse. The problem is most noticeable when I am playing WoW. The mouse either stops responding or it lags for a bit. Thinking it was a WoW issue I contacted a GM who told me that it was a USB firmware issue that Apple has acknowledged. I am just wondering if there is indeed a firmware issue and is there an update or fix to solve the problem. Thanks.

bump

USB Wireless adaptor issues

I purchased an Asus USB-N13 wireless adaptor. I'm running a PowerPC G5, 10.5.8. I just ran Software update yesterday.
I installed the driver, that software says I'm connected to our wireless network with good strength.
I open Safari or Firefox, and those tell me "I'm not connected to the internet".
The aggravating thing is a guy from work took it home, installed it, and everything worked fine.
In Network Prefs, it sees the USB device, and all looks well.
Any ideas?
Thanks in advance.
Windlaker

bump

Iogear USB BT dongle issue

okay, i bought an iOgear USB Bluetooth 2.0+EDR dongle for my powermac g4 running 10.4.8. the problem is it only shows two bt profiles! File transfer and File Exchange. i really want to use my BT headset w/ichat. but it wont even let me pair it! The assistant just says my hardware is incompatible. HELP PLEASE!!!

It may also be due to the fact that the ONLY USB Bluetooth Adapter that Apple specifically supports the use of on Macs is the D-Link DBT-120. I've heard many reports of other adapters that don't work at all, or only partially (especially regarding syncing phones).

Can't get dlink dwa-125 usb wireless dongle to work

Hi, I'm installing arch on my parents PC. I want them to try linux out but I've got a couple problems.
1) Firstly I can't get our dlink dwa-125 dongle to work. I checked aur out and saw that there was a package for a kernel driver, but it wouldn't install. So I got stuck there, I wasn't able to figure out how to compile the module myself. I tried downloading the source code from ralink http://eng.ralinktech.com.tw/support.php?s=2 . The version I require is for the rt3070.
2) I can't get the webcam to work in skype, it's a quickcam pro 5000. The camera works fine in luvcview and cheese, when I click on test in skype the camera led turns on but no picture, when I double click to get fullscreen it's just grey. I followed the guide here https://wiki.archlinux.org/index.php/Webcam_Setup and I tried
export XLIB_SKIP_ARGB_VISUALS=1
before starting skype but it didn't help.
Hope someone can help me get these two things running then my parents won't have a reason to keep starting windows.

1) you need to blacklist the rt3070 drivers. maybe this helps: http://ubuntuforums.org/showthread.php?t=1289917
good luck

Can i use a Usb wireless for my ibook?

Can i use a Usb wireless for my ibook?

Hi, Kimberly. Welcome to Apple Support Communities.
If you mean a USB wireless dongle, the answer is yes (as long as it is Mac-compatible).
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/

D-Link USB wireless adapter

I have a D-Link wireless router and USB dongle package, it works with my windows laptops perfectly well.
I am looking for a way to use the USB wireless dongle with a G5 tower so I can use the Mac as a web machine.
There is a software driver for the dongle but I have no idea what information on the different tabs I should enter, so any ideas what this should be?
The user manual is for windows, there is information on how to set up for Mac, despite the inclusion of the Mac driver on the CD.
The dongle is a D-Link DWA-111, user manual here:
ftp://ftp.dlink.co.uk/wireless/dwa-111/DWA-111ManualEnglish.pdf
thanks for any help

hi....
i use a d-link dwl g122 dongle that has the same RT73 ralink chip.
the d-link driver that came with the CD just did one thing to my G5 powermac: kernelpanic!
after some searching on the web i found out, that it is best not to use the d-link driver at all, but to use the original ralink driver for the chip provided here:
http://www.ralinktech.com/support.php?s=3
load the "USB(RT257X/RT2671/RT2500)" driver. that's the driver, that will give you the wireless utility as it is shown in BD's picture.
before you install it, make sure that you uninstall the d-link driver completely. there should be an uninstaller in the dmg or zip file, that was on the CD.
then install the ralink driver and after that connect your d-link dongle. the wireless utility should pop up after a minute or so, but first you've to go to the network preference pane and confirm, that there is a new port detected.
then you can go back to the wireless utility, that by then should be searching for available wireless networks in the site survey tab. choose yours and enter the password when asked. after that safe the connection to a profile.
Message was edited by: dirkt68

Missing USB driver / dongle for HP Wireless Elite Desktop v2

Hello there,
I recently lost my usb driver / dongle for my keyboard and mouse (HP Wireless Elite Desktop V2). I am unable to use both keyboard and mouse.
What is the solution for this problem. Can you send me a replacement usb dongle / driver. I sincerely appreciate your help.
Thanks and regards,
Samy Pal

Samy,
The Elite Desktop v2 uses Link 5 technology but my understanding is there is no individual Dongles available.
You would have to buy a whole new Mouse, etc, etc. to get a new Dongle.
You can always contact HP Support directly for your area/country and ask them yourself.
HP tech support/ customer service phone number to call
This forum is a volunteer service and not a direct portal to Support.

USB network dongle for wireless networking

Hi all
Just a quickie, I've just bought a mini, not wireless, thought I'd put an extreme card in it, but it's not to be, the wireless option is a rip off in the UK as a retrofit.
Has anyone managed to use a USB network wireless dongle?
I have seen a couple for sale on ebay, but I'm not sure about drivers etc?
tia
wilse

Hi wilse,
Few things that you might like to consider from my personal experience;
First, I guess, is if you can afford an airport card then its definately the best option without any shadow of a doubt (even if you fit it yourself - The Airport i user installable on virtually everything else and is very straight forward), I have a 12in iBook G4 (800) which i got Airport extreme for and it's constantly reliable and always fast.
Second, if you plump for the USB option I run a D-link Dwl-122 wireless adapter sticking out of my Powermac G4 450x2 which has been notorious for its poor driver support in the past but with the latest driver (From MacUpdate: http://www.macupdate.com/info.php/id/15997) I have no problems running it through the front pannel USB2 slots from a PCI card (i only say this as these are also notoriously difficult in old G4s but they're now happy together). I get a good reception on this card from 3 storeys away in a very high ceilinged Georgian house.
Thirdly, my mum also runs one the same USB wireless adapters on an iMac (flat panel USB1.1 from sometime in 2003) with the no problems with the driver above. The Dwl-122 is only wireless .b though so can only get connected at up to 11mps.
Fourthly (?), if i could put Airport Extreme cards in both of those Macs i would at whatever cost because its still annoying having bits stinking out in my opinion even if you are lucky enough to get a USB adapter with no conflics with your system setup (unfortunately nether are compatable with the AEX and Airport cards now go for upwards of £70 on ebay!!)
I hope all that helped somehow, as you can probably see i've spent many an hour battling with third party drivers for external devices, well done for having the foresight to ask first!!! I wish i had!
Anyway good luck with your decision and i hope you get a few more posts here before you make up your mind...
SEB
iBook G4 12in (800mhz, 640MB, 40GB) Mac OS X (10.4.3) Powermac G4 (Dual G4 450mhz, 768 MB, 20GB, PCI USB 2.0)

Issues with usb wireless adapter

Hi
Please excuse my ignorance.
I have an imac (about 2 years old) with a built in airport card. I am trying to use a usb wireless adapter. It has a realtek rtl8187. we have a wifi network here that works with my pc using this adapter but i cant get it to work on the mac. You have to sling the adapter on the window sill but it picks it up fine.
I have installed the supplied software (obviously the mac one!) and it installs the software and driver. After i have restarted, and plug the thing in, it tells me to turn on my wlan card on the supplied software?? It shows up in the listing on network settings as ethernet adapter ((null)). I cannot find any setting to turn on my wireless card, i thought that was airport?
The airport picks up the network but the signal is too weak to connect, hence the adapter with a bit more guts....
I have this beautiful mac, colecting dust and am having to use a pc!
If i connect the usb adapter without installing the software, it constantly has a box popping up in network settings saying that an external device has changed settings! it doesnt stop doing it, until you delete the location...
Can anyone help? I may be being thick and dont have a wlan card or something or airport will not allow me to use this thing. I only just started getting into macs when i moved to spain, where it has sat colecting dust for 3 months.
I would appreciate any advice.
Thanks
Richard

TNHusker, welcome to the forum.
Cisco makes a router that is good for two-story homes. I have used it for several years. My router / hotspot is on the second floor and my Blu-ray player and laptop are on the first floor. Both work extremely well with the router. They also make a USB, AM10, that works very nicely with a desktop without a wireless card.
I have had a few problems with both, but have always been helped successfully by Cisco Customer Service. They are very good.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Bluetooth USB Dongle issues

I'm using a plantronics usb bluetooth dongle and so far with no luck. I have both the dbus and bluetooth daemons running.
lsusb shows the device:
Bus 002 Device 002: ID 047f:4254 Plantronics, Inc. BUA-100 Bluetooth Adapter
but hcitool dev shows no devices. I've read the wiki but there isn't much in the way of troubleshooting.

I'm using a plantronics usb bluetooth dongle and so far with no luck. I have both the dbus and bluetooth daemons running.
lsusb shows the device:
Bus 002 Device 002: ID 047f:4254 Plantronics, Inc. BUA-100 Bluetooth Adapter
but hcitool dev shows no devices. I've read the wiki but there isn't much in the way of troubleshooting.

BELKIN usb wireless FSD9050 device not recognized by IMAC G4 800

Below is a thread from another group that I was advised to post here. If anyone knows of a solution or work around, it is appreciated.
Thanks
Topic : Belkin Not recognizing
This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
Reply to this Topic Subscribe to this Topic Back to Topic List
Replies : 14 - Last Post : Nov 30, 2007 6:32 AM by: real_tt
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Belkin Not recognizing
Posted: Sep 19, 2007 9:04 PM
Reply Email
I bought the Belkin Wireless usb Mimo F5D9050 and it worked amazing with my Ibook G3 800Mhz.. but then it started to occasionally not work until i would eject it and reconnect it a few times.. Now no matter how many time si reconnect it it will not work... ive tried to re-install the belkin but still no luck.. and so i plugge dit into my Windows pc and it worked fine... What could this be! im going nuts
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 19, 2007 9:39 PM in response to: JakeHebert
Reply Email
Hi, Jake. Welcome to Apple Discussions.
It's possible that your AirPort card has fizzled out on you. AirPort card failure doesn't happen very often, but it happened to me once, and it was very frustrating.
We diagnosed what was wrong with mine by my husband swapping his AirPort card with mine. Then my iBook would connect, but his wouldn't, so we knew it was the card.
Will the iBook work on any wireless network? Do you have someone with whom you could swap cards to see if that's the problem?
Possible sources for replacing the original AirPort card (links last checked 8/19/07):
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
http://www.expercom.com/productdetail.html?PRODUCTID=305851
http://www.macrecycling.com/ibook-g3-c-18.html
http://techrestore.com/xcart/product.php?productid=16174
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 1:40 PM in response to: Ronda Wilson
Reply Email
well. no i have no airport card, and never have had one.. this wirless card is a usb plug-in one and .. it is recognized by every compute ri plug it into except the on ei need it for.. yet the one thats not recognizing it now USED to recopgnize it not even 2 weeks ago!... its realllyy frustrating... i mis susing my ibook lol
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 3:12 PM in response to: JakeHebert
Reply Email
Have you tried using the other USB port? If neither port works, try plugging in a USB mouse to see if it works to confirm that your USB ports aren't damaged.
Have you installed any new software? Maybe a Security Update or something similar? Sometimes that will break functionality of third-party drivers.
You may need to go to the website of the manufacturer of the USB wireless device to see if an updated driver is available.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 4:11 PM in response to: Ronda Wilson
Reply Email
mmm.. Both usb ports work fine with my wireless mouse... i will have to talk to a tech of Belkin.. but i hate that because i already had to once before... bahh... but i did search for a new updated version of the driver for the ** thing.. but no such luck.. I dont think any new software has been installed though ... i appreciat eyour help though Ronda!
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 5:57 PM in response to: JakeHebert
Reply Email
You're most welcome.
What is the model number of the adapter?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 6:24 PM in response to: Ronda Wilson
Reply Email
umm its um f5d9050 the 3001 series... its HUGE lol... but it USED to work like a dream.. baah
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 8:10 PM in response to: JakeHebert
Reply Email
When did you buy it, Jake?
There is a driver that was released on June 19, 2007.
http://www.belkin.com/support/article/?lid=en&pid=F5D9050&aid=5925&scid=0
Even if this is the one you have installed, you may want to reinstall it.
Good luck.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:13 PM in response to: JakeHebert
Reply Email
Did this one ever get a real response. Mine is doing the same thing and the machine will not recognise that the usb is even plugged in. Any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:21 PM in response to: real_tt
Reply Email
Hi, and welcome to Apple Discussions.
Since Jake hasn't posted in over two months, either that driver worked for him, he found the answer elsewhere, or he gave up. Since he hasn't posted back, we have no way of knowing.
What model computer do you have?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:35 PM in response to: Ronda Wilson
Reply Email
I MAC G4 and I have tried every driver listed on the forums with no success
it states to go to the network in system pref. to set up device
there appear to be no way I can figure out how to add the usb device
any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 10:29 PM in response to: real_tt
Reply Email
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 5:52 AM in response to: Ronda Wilson
Reply Email
I am not running Leopard... using 10.4 and I already own the product. It is suppose to work and there is no reason to purchase another unit. All I need to understand is how to make the IMac recognize the USB device or how to configure the unit. Others have stated in this and other forums that they have used this unit with success.
Thanks for address this specific issue.
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:06 AM in response to: real_tt
Reply Email
Your specifications at the bottom of your post state that you're running Mac OS X 10.5.1?
You may want to post in the Internet and Networking your iMac (Flat Panel) Forum. Maybe someone there can help you out. (You've posted in the iBook G3 Forum.)
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:32 AM in response to: Ronda Wilson
Reply Email
I am using a laptop to connect to the internet not the machine that I am writing about. If I could do that I would not need any help. I will check out the other forum but this thread is on topic.
Mac OS X (10.5.1)

The information in your thread references an iBook quite a lot but the title of this post says iMac so I going to assume that you are trying to use this device with an iMac.
It is also unclear what version of the Mac OS you are using.
Let's start by stating the fact that these USB networking networking devices are not inherently supported by the Mac OS. Therefore they need drivers. These drivers are usually fragile and only work with a well defined version (or versions) of the Mac OS. Anytime that you make any upgrade to the Mac you are able to create an incompatibility with the driver and the device.
The Belkin F5D9050 does have some Mac OS drivers available at this link.
You should uninstall/remove the current driver for this device.
Restart your iMac.
Download and install the appropriate driver for the version of Mac OS on your iMac.
Restart your iMac.
If that doesn't work, either get the original AirPort card for the internal wireless slot in the iMac or get an Ethernet wireless adapter. An Ethernet wireless adapter requires no drivers and therefore will work with any Ethernet device.

Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!

Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support

USB Wireless connections not working in Latitude E6320 , Windows 7

Dear all,
I having an issue with an external USB wireless network drive.
I can install with no issue, however it appears always disabled on the network connection.
Someone had a similar problem?
thanks
José Luz

Dear Hemalatha,
Thanks for your support on this issue
I tried to updated all network drivers but with no success.
Indeed disabled all the networks, I took several print screen
Please take a look below:
- All the network drivers are enabled execpet the TP-Link
- All the network drives are disabled
When I tried to enable TP-Link, i get this message
If we take a look at Computer manager, you can see that everything is disabled except TP-Link
However I´m unable to work wit it.
Thanks once again for your support.
Thanks
José Luz

USB Wireless Dongle Issues

Similar Messages

Maybe you are looking for