Use audio from clip in other parts of sequence

I inserted some photos in my sequence but I do not have any audio playing while the pictures are rolling. I would like to use some of the audio portions of my other clips to put "below" the still pictures.
How do I do this?
Thank you,
Ildiko

There are three ways that I can think of at the moment to do this:
1. Unpatch your video tracks so that the v1 button is not adjoined to the V1, then drag a clip from the viewer to the overwrite/insert selection on the canvas.
2. Lock your video tracks (by hitting the lock button on the left), then drag a clip from the viewer to the canvas or timeline.
3. Select just the audio from another clip already in the timeline by holding down Option and clicking it, then copy and paste it somewhere else.
Sasha

Similar Messages

Speedgrade crashes every time I use split into clips function as part of scene detection.

Speedgrade CC (latest version) crashes every time I use split into clips function as part of scene detection.
I can use the keyframe function fine, but if i split it into clips it crashes 9 out of 10 times... so to get the job done i simply keep reopening the project, cliping and praying it works, then it crashes.... and i repeat this until it doesnt crash!
File format im using is a 22min long Prores422 HQ 1080 25P file.
Any ideas?.... im guessing im going to get the old "reinstall the software" one first... anything else?
also have issues with Speedgrade just crashing for no good reason at random times while im grading too but ive come to expect that from the buggy software.

I've got several 1080p mov's that have multiple sequences with 20 to 40 minutes a sequence I've regularly run over to Sg from PrPro. Granted, they're pretty straight forward, mostly simple cuts with a few transitions/wipes, no more than 3 video layers a sequence. Only one has any Ae stuff on it, and again, pretty simple.
But as noted, there are those who do programs for broadcast with it ... I'm wishing one would chime in. Maybe shooternz ... I think he does b-cast work. Vastly more experienced than I am, PrPro, Ae, Sg, Audition ... the "suite". There's several others around here, though they tend to 'hang' in the PrPro forum more than here.
Neil

How can I reinsert the deleted audio from clips in my sequence?

How can I reinsert the deleted audio from clips in my sequence?

I can tell you a work around to get you going in the meantime, just may be time consuming if you have a lot of clips in the timeline.
double click a clip missing audio
press the go to in point and copy the timecode to notepad
press the go to end point and copy timecode
right click clip, and reveal in project
double click the original in project
paste in timecode and set in & out points again
drag audio
As I said not the quickest way, but it works, and won't actually take as long as you'd think, 30 secs or so per clip, i just hope you don't have over 100 clips without audio
Troy

Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

Is there a way to make a video call from my iPhone 4 to a non apple phone? Also is it possible to transfer pics using bluetooth from iPhone to other company mobiles? Its a great phone but sometimes I feel struck inside it.

You'd need an app like Skype to video call with other phones.
Data transfer is not supported via bluetooth and iphone to iphone is not supported at all.

Using audio from a WebSite in a connect session.

I am using VoIP to present Websites that have voice recordings (and other audio) embedded in them. Is there a way to enable Connect 7 to present VoIP and the audio in Web sites? In my attempts participants can hear me but not the audio in Web sites. Help would be appreciated. Thanks ...

Adding to this: could it be that because the audio-from-a-clip comes from a different location (in fact an external disk where the movie project is) while the rest of the voice-over music tracks come from my iTunes?

Can't import audio from clip into Premiere Pro CC.

I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing. I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully. Can someone please instruct me as to how I can edit the .xmp file so as to correct this problem? Thanks.

I export a clip using the "match sequence settings".
Mmm, don't ever use that. It's for people who don't know what they're doing, and often causes more problems that it solves.
Better to know what you're doing and set up your export manually. Try that, then report back what happens.

Removing Audio from clip

Ok, I just got FCE for X-mas and I am completely lost. I need to know how to remove the audio from the clip, and/or how to edit the audio seperately than the video.

Hi John.
There are many ways. Probably the simplest is to highlight the audio in the timeline and press the Delete key.
However, if you are new to FCE you will have an extremely steep learning curve ahead of you and I would forget about making a serious film for at least a month!
You should get a simple step by step instruction book.
I can thoroughly recommend Tom Wolsky's book - "Final Cut Express 2 Editing Workshop".
It is very "user-friendly" and guides you easily through all the steps. You are told exactly what to do and why. It's the next best thing to having a tutor sitting alongside you.
Tom is also one of the main contributors to this forum, so is available should you have any problems.
Don't be put off by the FCE 2 name - it works for FCE HD just as well.
You can get it from Amazon. It is well worth the money and will save you from countless hours of frustration - which will almost certainly happen if you struggle on alone.
Ian.

Static in entire video after detaching audio from clips

After exporting, I was having some audio/video sync issues with my 1 hour and 38 min movie.
It was suggested that I detach the audio from the clips...so I tried it on my 6 minute preview with good success. I exported the preview and the sync problem was fixed.
So I started detaching the audio to fix the regular 1h 38m movie. I got through most of the clips and then went back to play a certain section of the movie...and I noticed that now there is a bunch of static in the entire movie.
How do I get rid of the static?
This also has seemed to really slow the project down. Anything I try to do on the project and iMovie just tanks.

Thanks for your reply Geoff,
I basically have a soundtrack 3.28 minutes long which I want to be the only noise thats playing throughout my interchanging video clips, so I would like to completley move the audio from the all of the indivdual video clips that I am adding in, I thought the 'detatch audio' button would be the one for this, but as I continuously play back bits of the movie to prefect editing I can still slightly hear the sound from the individual videos that I am adding?
So frustrating, but Im sure thats its something real basic that I am missing.....

Return removed audio from clips

I added clips to the videotrack, removed the audio from it. How to return the audio back? Thx. Sorry for eng.

Select clip and position playhead over clip, hit F for Match Frame.
Source clip will open in Source Monitor.
Now you can drag the audio or do an overwrite.

Using audio from 2 angles simultaneously in multicam

Hi,
I have recorded panel discussion on 3 cameras with 3 radio mics. The audio has been recorded to two of the cameras (One mic on one camera and 1 on each track of the other camera). I want to use the audio from both cameras throughout the entire discussion.
At the moment I can only pick audio from one of the angles. Any ideas on how to select two?
Any help would be appreciated!!
Cheers,
Adam

Hi,
Straight from Digidesign (maker of your MBox2) :
Compatibility Alerts
Mac OS X 10.5 (Leopard)
Pro Tools software and hardware are currently not compatible with the Mac OS X 10.5 (Leopard) operating system, including all versions of Pro Tools 7.4. For the latest information, check the announcement in the News section regarding upcoming support:
Information on Pro Tools Compatibility with Mac OS X Leopard
If you choose to upgrade to Mac OS X 10.5 (Leopard), you will need to install it on a separate hard drive or drive partition. To use Pro Tools 7 currently, you will need to boot from a Mac OS X 10.4 (Tiger) startup system.
From this website:
http://www.digidesign.com/index.cfm?navid=54&itemid=23954
So, the answer is, not until Digidesign have completed their update to be compatible with Leopard.
Cheers, and good luck.

Detaching Audio from clip from the film library panel?

I was wondering if anyone knows how to grab video only from the film library panel. I want to just pull video and not audio as I layout video only out onto my timeline and don't want to hasstle through detaching audio from each clip in the timeline. Does anyone know how to do this? I know Adobe Premier lets you do this but I'm fairly new to FCP and would like to know

Unchecking the audio in the sequence so that source/left A1 isn't connected(not touching) to timeline/right A1 will ensure audio is not added to the the a1 track.
In Premiere 5.5 if you unhighlight a1(source/left) and A1(timeline/right) no audio will be added to that track.
If you unconnect A1 & A2 in the sequence audio will never be added to timeline whether you drag a clip from a bin or insert/overwrite from the viewer window.

Avchd using audio from other clips

Hi
I just reloaded a project from a client to do some adjustments. all files are AVCHD put in 3 different folders. "Media/Footage/Card1/Private (Card2/Private)... you get it.
Suddenly my audio both in timeline and reference monitor switched source to other clips. I've tried to restart, I tried to use prelude to ingest using prores conversion. if I play it from quicktime everything works fine. this is only a problem with some clip not all. I didn't rename in the folder structure only in the project bins.
Does anybody know if this is a general problem for CC 2014. I never had this problem with CC version.
Let me know if anybody struggles with the same issues.
regards
Morten

Hi Morten,
When you had initially put the project together, did you Import the AVCHD clips with "File > Import" or Media Browser? The latter is preferred and alleviates a lot of discomfort later on. Can't guarantee this is the solution, but doesn't hurt.
Thanks
Jeff Pulera
Safe Harbor Computers

No audio from clips from camera

I am using iMovie HD 6 and I have transferred my clips from cam corder. The problem I am having is that I am manually dragging video clips from my camera to iMovie and the clips go in except they have no audio. Any solutions to this problem would be great...

What kind of camcorder are we talking about? I suspect this isn't a tape based MiniDV type camera, right? And instead you are importing from some sort of DVD, Flash, or hard drive based camera? If so are the videos in MPEG format when you add them to iMovie?
QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, when you convert videos they sometimes only get the video and no sound since iMovie (really QuickTime) is not looking for the audio track within the video track and it gets lost.
Here is an article explaining it when you try to convert video to iPod format...
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
More info you might be able to find here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
Patrick

No audio from clips importen to versjon 9.0.7

Does anyone have an answer to why the audio is missing from AIC files imported to iMovie 11 9.0.7? After I upgraded to Mountain Lion and the latest version of iMovie, my repacked AVCHD files are missing audio. They sound perfectly good in QuickTime, but not in the editor.

Hi Jenn,
Thanks for the information on your 2 computers. At least iMovie works OK on the iMac running Snow Leopard with iMovie '11 (9.0.4).
Trashing iMovie's preference file will often fix problems. In some circumstances the preference file can become corrupted.
On your Mac Mini, go to your User (Home) folder Library/Preferences (not the Library folder at the top level in Macintosh HD). As you are on Lion (Mac OS X 10.7.4), unlike earlier versions the User Library folder is hidden (as it is on Mountain Lion). To access it, click on Go in the Finder menu bar, then press and hold down the Option key - the Library folder will appear in the drop down list, enabling you to access it.
In the Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings. If iMovie now runs OK (and audio is working), you can change the default settings in the menu item "IMovie>Preferences" if desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm your existing Events or Projects. This may not fix the audio problem but is worth a try.
Sorry if this sounds obvious, but I guess you've checked that the volume hasn't been muted in the Event (use the Inspector to check). Can you hear audio when playing music through iTunes, or other audio generally? Or is it just isolated to iMovie?
Another thing to try: In Finder, navigate to your imported Event in the folder Home (your User)/Movies/iMovie Events. You will see all the Event clips with the extension .mov - these will be in Apple Intermediate Codec (AIC) format. Open a clip in QuickTime and check whether the audio can be heard. If so, clearly there is a problem with iMovie. At least this will tell us whether or not the audio is being imported properly and will help to narrow down the problem.
John

No audio from clips

I just downloaded the Trial version of Adobe Premiere Pro CS5 and when I import a clip, i'm not getting any audio, not even anything showing up in the 'Audio Master Meter'
I do get audio when I import a .mp3 file
HELP pleeease, this is very irritating!

Can you share the specs. of those Imported Clips, and especially the Audio CODEC inside?
Now, there is a common reason for Audio to either not show up, or perhaps be truncated - failure to complete Conforming. This ARTICLE goes into more detail. As PrPro edits/plays back from the Conformed Audio files (CFA's), the Conforming process is very important.
Good luck, and please let us know a bit more,
Hunt

Use audio from clip in other parts of sequence

Similar Messages

Maybe you are looking for