Use itunes to restore... I CAN'T! help please

hi.. i've been at this for hours and i can't solve anything.. while my ipod was actualizing.. all of the sudden.. the screen shows.. do not disconnect.. and it went black.. so i reseted it.. and instead of .. "working".. another screen shows up that says.. "use itunes to restore".. so i pluged it in.. and nothing happened.. nothing ricognizes it.. not itunes.. and updater says.. can't mount ipod.. what can i do??

My Problem iz rather weird nd strange. about a month back, my 2GB nano just freezed due to no apparent reason. i used the hold-menu-and-centre-key strategy to reset it and the next screen said somthing like USE ITUNES TO RESTORE. i connected it thru my USB cable to my PC and i tunes wudn't recognize it. then i used the updater which said can't mount iPOD. i then checked ur forums and tried tht manual disk mode to format it in my PC. but on right clickin on
iPOD(which shows as REMOVABLE DRIVE), nothing happens. no format screen iz displayed. but somehow trying again and again and restarting and shutting down the ipod service solved the matter. for testing, i copied one song with couple of photos in it. it worked reallly fine until i
formatted my pc.
I re-did the partitions, reinstalled the windows
and every software. then i downloaded the latest iTUNES(7.0.2) from apple's website. ripped a few cds on my pc, then opened iTUNEs to copy more music in my iPOD. just after the copy started, iTUNES gave error which had something to do with the transfer. i unpluggged my iPOD
after ejecting frm iTUNES and found the same freaky error (USE ITUNES TO RESTORE) again. as i had tackled thru this error earlier, so i repeated the same procedure but with latest iTUNES this time. i had to download the latest iPOD updater(1.3 i guess) too as it is not included in iTUNES.
and after every step, it is still giving the same error over and over again. i hav another pc which iz using the same windows with previous iPOD updater and iTUNES. that updater givez errors like CAN'T MOUNT iPOD,FIRMWARE UPDATE FAILURE, etc. and also hangs sometimes. and even if it
restores, the iPOD never restarts. when i use my other PC with newer iTUNES and new windows on it, it givez errors like UNKNOWN ERROR, etc. also after restoring, the iPOD restarts and shows the same USE ITUNES to RESTORE error. main probelm i m facing in restoring process thru disk mode iz tht whenever i right click on the iPOD in my COMPUTER, there r 99% chances that it wont show any format dialogue at all (even if the iPOD service isn't running)
kindly help me az i m tooo much fed up of this thing. i mite smash the nano onto my computer screen if nuthin helps :S
kindly reply soon. please note tht the country i live in doesn't giv support for iPODs and i received this product as a gift about an year back and has been working fine ever since (except last two times) also i cant afford to send it bak to UK or something like tht. so online
help wud b much appreciated...
also i cudnt find any POST new TOPIC button on these forums, kindly help me in tht regard too...
THANKING IN ANTICIPATION
P.S. i've tried it three different PCs with frsh installations. so suggest me something different also drive letter can't b changed for iPOD in disk manager..

Similar Messages

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • "Connect to Computer. Use iTunes to Restore" but can't 'see' it in iTunes

    I got the error message on my iPod -- "Connect to Computer. Use iTunes to Restore iPod." Problem is, when I try to connect to my computer, it asks if I want to restore it with iTunes, I say yes, but iTunes doesn't 'see' the iPod, so I can't restore.
    The iPod just sits with "Do not disconnect" on it and the battery icon moving. I'm dead in the water.
    Any ideas?
    Message was edited by: dragals

    You might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    If that works, then you should be able to attempt a restore.
    Patrick

  • No audio for full screen on iTunes 11.1.1. can anyone help please?

    just updated to i tunes 11.1.1. the design was a bad enough of a surprise. but more importantly, if i try to play videos in full screen,the audio vanishes.
    can anyone help please? anyone having the same problem? cheers

    That was an issue that lots of people were having with 11.1 (including myself). I thought this update would fix that, but alas, no.
    Although I did discover that the Surround channel (if a movie has it) DOES work in full screen... just not the regular Stereo audio.

  • |HELP PLEASE|:. Using itunes with iriver, how! .:|HELP PLEASE|

    Ok, for christmas i got an ipod [Nano 3rd gen], and my lil sis got an iriver [X20 model, just today mum bought us X3 $30 itunes cards, for itunes, now the format itunes uses is called :m4a, i want to get these songs onto my sisters "iriver X20" mp4 player, but the only formats the iriver can use are:mp3 & WMA, please help, i have tried to just put the itunes straight on to the iriver X20 but when i took the usb cable out of the iriver, it showed no recollection of the itune songs.
    i put the cable back into it so connected to the computer again, and it showed the itune songs were still on the iriver X20, im sooo confused, maybe if i could change the itunes format the mp3, from m4a i could use the on the iriver X20, but i dont know how to do that either, im really puzzled lol, please help!

    +the only formats the iriver can use are: mp3 & WMA+
    The iTunes Music Store does not sell either of those.
    To use your gift card, make sure you are buying "iTunes Plus" tracks. Use iTunes to convert them to MP3 format, which can then be played on your iRiver. Follow the directions in the iTunes Help article "Saving a copy of a song in a new file format."
    Do not buy the protected tracks. They are not usable in non-Apple players.

  • I have just attempted to update my daughters iphone 4 to ois7 all I get on itunes is Restore error 3194. Help please

    I have just attempted to update an iphone 4 to ois 7. All I get on itunes is restore error 3194. Can anyone explain what is going wrong with my attempt to upgrade?

    Read here  >  http://support.apple.com/kb/ts4451

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

  • HT201177 the camera is not detected on my thunderbolt screen..it,s connected to a mac book pro 13 inch using a thunderbolt connection ..Can someone help please

    My thunderbolt screen says there is no connected camera...conected to 13 inch macbook pro with thunderbolt cable ....can someone please help

    In skype did you set the audio/video preferences for the camera?  Also might try doing a smc and pram reset if the camera is not selectable or enabled from skype.

  • Updated iPod to 1.2 , now it tells 'use itunes to restore'. How ?

    Hello, sorry my english.
    I have just updated my iPod nano from firmware 1.1.1 to 1.2 using latest iPod Updater 2006-06-28. It went ok.
    Then i entered iTunes 6.0.5 and made an eject.
    The iPod showed "OK to disconnect". I disconnected.
    But now when I turn it on, it shows this message:
    "Use iTunes to restore"
    How can I do that? When I open iTunes it behaves like there is nothing wrong with my iPod, it lets me add and remove music with no stress. Also I can't find any option on iTunes to 'restore' my iPod. I know how to do that using the iPod Updater (restoring to factory settings) but I can find any 'restore' option on iTunes like my iPod warns.
    Can anyone help me? Thank you.

    I am having the same exact problem!! like first my ipod nano wouldnt be recognized then finally my itunes said updating ipod dont disconnect..after updating 477 songs it said ok to disconnect so i did nd den it got stuck in this screen that said use itunes to restore nd also it said dat in two otha languages..but im new at this and i have had like every problem there is to have but still can you explain to me wad to do. thanks loves. nicc<33*

  • Error 1015 apears can someone help please

    eror 1015 apears on my iphone when i try to restore it can someone help please
    Thank you

    There are 4 possible causes of error 1015:
    The activation server truly is unavailable. Rare, usually fixed within minutes.
    Your antivirus or firewall or router's firewall is blocking access to
    gs.apple.com on ports 80 and 443.
    Your iPhone is jailbroken or otherwise hacked.
    The computer you connected to during the restore/update was
    used to hack/jailbreak some other iOS device, and its
    network database was corrupted during the process.
    (Thanks to Lawrence Finch for the wording in
    https://discussions,apple.com/thread/4793244?start=90 )

  • HT1363 My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.

    My old iPod Nano says to use iTunes to restore and I've followed all suggested help steps, but I can't get it into disk mode nor can I get it to show in my computer or in iTunes.  I have the latest version of iTunes.  Windows has all the most recent updates too.  I can reset the iPod, but the message to Use iTunes to restore comes back and I am stuck.

    Already tried another USB port, still nothing.
    I don't have another PC to check, I only have one which is the one not working with my iPod.
    It appears under my Computer, just not under iTunes. Plus, the iPod classic troubleshooting assistant doesn't work because I can't restore since it can't come up onto my iTunes! Even my iPod says "Use iTunes to Restore" once in a while, but I plug it in & I'm not able to restore it since it won't come up under iTunes.
    Please help

  • Help! "Use iTunes to restore.."(CAN'T!!)

    Hi all,
    I got an ipod nano.(4 gb)when i tried to open my ipod ,it gives an error "use iTunes to restore" then i try to restore but it gives an error "iTunes has detected an iPod in recovery mode.You must restore the ipod before it can be used with iTunes"
    Hundreds of time i tried to restore but all of the time same error..
    Anyone have any idea?
    Ipod Nano 4 gb   Windows XP  

    My Problem iz rather weird nd strange. about a month back, my 2GB nano just freezed due to no apparent reason. i used the hold-menu-and-centre-key strategy to reset it and the next screen said somthing like USE ITUNES TO RESTORE. i connected it thru my USB cable to my PC and i tunes wudn't recognize it. then i used the updater which said can't mount iPOD. i then checked ur forums and tried tht manual disk mode to format it in my PC. but on right clickin on
    iPOD(which shows as REMOVABLE DRIVE), nothing happens. no format screen iz displayed. but somehow trying again and again and restarting and shutting down the ipod service solved the matter. for testing, i copied one song with couple of photos in it. it worked reallly fine until i
    formatted my pc.
    I re-did the partitions, reinstalled the windows
    and every software. then i downloaded the latest iTUNES(7.0.2) from apple's website. ripped a few cds on my pc, then opened iTUNEs to copy more music in my iPOD. just after the copy started, iTUNES gave error which had something to do with the transfer. i unpluggged my iPOD
    after ejecting frm iTUNES and found the same freaky error (USE ITUNES TO RESTORE) again. as i had tackled thru this error earlier, so i repeated the same procedure but with latest iTUNES this time. i had to download the latest iPOD updater(1.3 i guess) too as it is not included in iTUNES.
    and after every step, it is still giving the same error over and over again. i hav another pc which iz using the same windows with previous iPOD updater and iTUNES. that updater givez errors like CAN'T MOUNT iPOD,FIRMWARE UPDATE FAILURE, etc. and also hangs sometimes. and even if it
    restores, the iPOD never restarts. when i use my other PC with newer iTUNES and new windows on it, it givez errors like UNKNOWN ERROR, etc. also after restoring, the iPOD restarts and shows the same USE ITUNES to RESTORE error. main probelm i m facing in restoring process thru disk mode iz tht whenever i right click on the iPOD in my COMPUTER, there r 99% chances that it wont show any format dialogue at all (even if the iPOD service isn't running)
    kindly help me az i m tooo much fed up of this thing. i mite smash the nano onto my computer screen if nuthin helps :S
    kindly reply soon. please note tht the country i live in doesn't giv support for iPODs and i received this product as a gift about an year back and has been working fine ever since (except last two times) also i cant afford to send it bak to UK or something like tht. so online
    help wud b much appreciated...
    also i cudnt find any POST new TOPIC button on these forums, kindly help me in tht regard too...
    THANKING IN ANTICIPATION
    P.S. i've tried it three different PCs with frsh installations. so suggest me something different also drive letter can't b changed for iPOD in disk manager..

  • When I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    I know my passcode is correct but when I try to reset my iPad mini it keeps asking for  a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Hi...i'm still using the old iphone 3G...my phone is no longer charging...when i tried to charge it, what i see on the screen is the usb cord with the arrow pointing the itunes logo...can someone help me?

    hi...i'm still using the old iphone 3G...my phone is no longer charging...when i tried to charge it, what i see on the screen is the usb cord with the arrow pointing the itunes logo...can someone help me?

    It sounds like your phone is in recovery mode, which means it needs to be restored through iTunes on your computer in order to get out of it.

  • "Use iTunes to restore". How can I access the iPod w/o losing present data?

    I have a request from my grandaughter to download a number of songs to her iPod. I charged the battery fully. When I tried to start it , it read "Use iTunes to restore". How can I access her iPod w/o losing any of her present songs? Please please help.

    You can't. Restoring will always erase the device. Unless you have a backup in iTunes or iCloud everything is removed. Purchased items can be re-downloaded as long as the original Apple ID used to purchase them is also used when reconfiguing the device after it is restored.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for