Use ncWriteMult to send frames at fixed interval

Hi,
I would like to call ncWriteMult API and have it send the CAN frames (about 10 frames) at fixed interval of 20ms. I read about the timestamp to each frames in the documentation but I do not have a clear idea on how to implement it. Can someone kindly advise me on this? I am using Labwindows 8.0
Thanks!!
Yong Boon

Hi Yong,
There is an example that will help you do this...go into Help --> Find Examples --> Hardware Input Output -->CAN --> Frame API --> Basic --> CAN transmit periodic. prj. You can use this example as the base and build over this any additional logic.
Thank you,
Arjun K
National Instruments
Applications Engineer

Similar Messages

  • Grab images using IMAQ without sending frame request

    Hello,
    When a camera is externally triggered, is it possible to design a *.vi that makes use of IMAQ and grabs images via Camera Link frame grabber without sending frame request signals AND without knowing the external trigger? Just to grab images whenever FVAL, LVAL and DVAL go high. Possible?
    Thanks.

    Greetings, kcin;
    Just to check whether I understood or not, to have the Framegrabber acquire images when the FVAL, LVAL and DVAL lines go high with no other communication between the camera and the host computer? What exactly is the purpose of this endeavor?
    Initially, I do not believe it would be possible while using our IMAQ Driver simply due to the way it is designed; I will look into the matter further and inform you of my findings.
    Cordially;
    Simon P.
    National Instruments
    Applications Engineer

  • HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    jengrz wrote:
    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
    TechCrunch posted a solution today that applies to this problem, I think.
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Click your old iPhone and "unregister" it.
    More info here:
    http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

  • HT3529 I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?

    Read here:
    http://support.apple.com/kb/TS2755

  • I have created a group in my address book, but when I try to use it to send out a group email, only a comma shows up. How do I send out an email using my new group contact list?

    I have created a group in my address book, but when I try to use it to send mail, only a comma shows up. How can I send mail using my new group? I have an IMac with OSLion.

    I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

  • I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

    I deleted adobe and now files won't open with preview automatically like they use to. How do I fix this?

    I think you solved my problem! Upon following your advice, I first got a message that I had not allowed a connection to the Tax dept computers, which would prevent the file I need to fill out from being e-filed. I proceeded to then open the file at the top of which was a security banner at which I chose the site as safe. I then filled in the first line of the form which autofilled other lines telling me I was connected with the tax site. In a few days when I have the data I need, I will actually attempt to file the return. If there is a problem, I will send another message. Thanks so much for your assistance!

  • Using wildcards (*) in sender file adapter - FTP type

    Hi guys!
    Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
    I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
    Thanks for info!
    Olian

    Thanks for all replies..
    I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
    *, ., *.dat, ...  nothing like that works..  Just exact file name.
    I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
    Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
    Is there anybody with this experience, that it works?
    Thank you!
    Olian

  • My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book.  It used to work. Any easy fixed for me?(I already tried uninstall and re-

    My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book.  It used to work. Any easy fixed for me?(I already tried uninstall and re-install)

    Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
    I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
    I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

  • I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite.  It is not listed on their system requirement website:
    Mac OS X 10.9 Mavericks
    Mac OS X 10.8 Mountain Lion
    Mac OS X 10.7 Lion
    Mac OS X 10.6 Snow Leopard*
    Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
    Only case insensitive file-system volumes are supported.
    http://www.graphisoft.com/support/system_requirements/archicad17.html

  • I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer.  I don't want messages on my computer!  How do I get this to go away and work like it used to?

    I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer.  I don't want messages on my computer!  How do I get this to go away and work like it used to?

    Follow the instructions under the heading "How to unlink a phone number" on this page.

  • Need to use only one sender and receiver communication channel.

    Hello Experts.
    I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
    For Eg;
    Sender                              
    D://dir1/file1 --->                  E://dir1/File1
    F://dir2/file2 ---->                 G://dir2/file2
    H://dir3/file3----->                 I://dir3/file3.
    Can this be achieved by using pass through scenario?
    Please let me know if the requirement is not clear.     
    Thanks in advance.
    Advit Ramesh

    Hi Advit,
    I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
    For Polling from multiple directories:
    http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
    Dynamic Configuration:
    Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

  • How can i use minutes and seconds in my job interval

    Sir,
    I want to use minutes and seconds in my job interval.
    suppose i want to run my job on 1:15:10 AM what will be the syntax. my code is below.
    Declare
    jobno number;
    BEGIN
    DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;',trunc(SYSDATE + 1) + (1/24),'trunc(SYSDATE + 1) + (1/24)');
    END;
    Thanks in advance.

    Declare
    jobno number;
    BEGIN
    DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;','trunc(SYSDATE + 1) + 4510/86400','trunc(SYSDATE + 1) + 4510/86400');
    END;
    number of hours in a day = 24
    number of minutes in a day = (24 * 60) = 1440
    number of seconds in a day = (24 * 60 * 60) = 86400
    4510 is the number of seconds in 1 hour 15 minutes and 10 seconds.

  • TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

    Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

    search google for "iphone remove picture from contact"

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • After enabling cellular data, i am receiving mails even if disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know

    Phone Model and OS
    Model - iphone 5
    IOS 8.0.2
    Problem Description
    After enabling cellular data, i am receiving mails even if we disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know.
    Steps:
    1. Enable Cellular Data
    2. Disable mail on "use cellular data for mail
    3. check whether mail is received or not
    tried multiple times and i am getting more billing amount because of data usage

    Mail isn't the only app using data. Turning it off there has no effect whatsoever on whether the rest of iOS or other apps you have installed. In fact most apps use data these days, at a minimum for Notifications and often for gameplay and other features.

Maybe you are looking for