USE OF CONVERSION ROUTINES WHILE CREATING DOMAIN

Hi,
Could anyone tell me the use of conversion routines under output characteristics tab while creating a domain ??
Thanks & Regards,
Mounica J

Coversion Routines are used to convert field values into internal or external format.
Once you specify the Conversion routines at domain level,it ensures that data conversion into external and internal format is handled automatically .
Please close the post if the question is answered.
Thanks,
Faiz

Similar Messages

I am unable to use services for objects while creating a PO

Hi All,
I am unable to use services for objects while creating a PO ie in me21n / Me22n .
Our client wants to attach some doucument along with the PO, we want to use services for object for this. I use this services for objects in admin level , but unable to use this at user level.
System gives the following message
No service available
Message no. SGOS_MSG002
Regards
Gsg

Hi,
Refer the following OSS notes 552127, 598073
For getting Object for services icon in ME21N and ME51N refer OSS note 913251

Oracle Portal 11g installation hangs while creating domain

I have patched the oracle portal 11.1.1.2 to 11.1.1.6 in Window 7 and tried to configure the oracle portal but the installation hangs while creating domain.
Just realised Window 7 does not support Oracle Portal 11g.
Edited by: user12063924 on Jul 5, 2012 11:58 PM

Dear Oracle Oracle BI Software,
This software is a big puzle for end users and it is really wasting our time in try and error scenarios. admit it with us and don't hide behid curtains. Well did u follow the Guides in the Book ? Yes Yes i followed and it is still showing errors .. in the name of God inform the Development Department to manage the setup .. i configured everything fine and what is really funny that after it loads 100 % it discovers that it can't create domain. sorry i m not a master Guy, but before the installtion it should validate for us if everything is ok and can be lauched not to do 1 hour workshop and cover out at the end of the movie that there is an error.
Guy put this product in the shelf until next release
Thank You

Error While creating Domain offline in windows...

I am trying to create a domain in windows using my scripts which i use in unix. But i am getting the following error. Here i am using Ant /build.xml/ and domain.properties( in this i pass the details) Please help....
C:\scripts>setenv
C:\scripts>set WEBLOGIC_HOME=C:\bea\wlserver_10.3
C:\scripts>set BEA_HOME=C:\bea
C:\scripts>set WORK_DIR=C:\wldomains
C:\scripts>set DOMAIN_HOME=C:\wldomains
C:\scripts>call "C:\bea\wlserver_10.3\server\bin\setWLSEnv.cmd"
CLASSPATH=C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_
patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.
jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.s
erver.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\m
odules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.ja
r;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
PATH=C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\d
efault\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bi
n;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\o
racle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
em32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Perforce;C:\Program
Files\QuickTime\QTSystem;c:\ant\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci9
20_8
Your environment has been set.
C:\scripts>ant clean
Buildfile: build.xml
identify-os:
init:
clean:
[delete] Deleting directory C:\scripts\build
BUILD SUCCESSFUL
Total time: 1 second
C:\scripts>ant setup-domain
Buildfile: build.xml
identify-os:
init:
[mkdir] Created dir: C:\scripts\build
init-domain-env:
setup-domain:
identify-os:
init:
init-domain-env:
config-domain:
identify-os:
init:
init-domain-env:
backup-domain:
identify-os:
init:
init-domain-env:
delete-domain:
[echo] Deleting domain 'C:\wldomains\pdc2' ...
[echo] Configuring WebLogic 10.3 domain (offline mode) ...
identify-os:
init:
run-wlst-script:
[echo] Running WLST script 'C:\scripts\wlst\offline\config-domain.py' ...
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading configuration properties ...
[java] [I] Reading the domain template ...
[java] [I] Configuring the domain ...
[java] [I] Configuring domain 'pdc2' ...
[java] [I] Creating log mbean for 'Domain' : 'pdc2' ...
[java] [I] Configuring the admin user ...
[java] [I] Configuring admin user 'system' ...
[java] [I] Configuring the admin server ...
[java] [I] Configuring admin server 'myserver' ...
[java] [I] Renaming server 'AdminServer' to 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Creating log mbean for 'Server' : 'myserver' ...
[java] [I] Creating SSL for server 'myserver' ...
[java] [I] Creating WebServer for server 'myserver' ...
[java] [I] Creating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring machines ...
[java] [I] Configuring clusters ...
[java] [I] Configuring servers ...
[java] [I] Configuring servers 'myserver' ...
[java] [I] Configuring server 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Updating log mbean for 'Server' : 'myserver' ...
[java] [I] Updating SSL for server 'myserver' ...
[java] Error: setListenPort() failed. Do dumpStack() to see details.
[java] [I] Updating WebServer for server 'myserver' ...
[java] [I] Updating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring startup classes ...
[java] [I] Configuring shutdown classes ...
[java] [I] Configuring mail sessions ...
[java] [I] Setting domain options ...
[java] [I] Setting overwrite domain to 'true'
[java] [I] Setting create start menu to 'false'
[java] [I] Setting java home to 'C:/beajdk160_05'
[java] [I] Setting server start mode to 'dev'
[java] [I] Saving the domain configuration ...
[java] Error: writeDomain() failed. Do dumpStack() to see details.
[java] [I] Closing the domain template ...
[java] [I] Reading the domain configuration ...
[java] Error: readDomain() failed. Do dumpStack() to see details.
[java] [I] Configuring JDBC ...
[java] [I] Configuring JDBC system resources 'CPoolDS,EPoolDS,poswotDataSou
rce,MainTxDataSource,AdditionalTxDataSource,PDC1PoolDS,urgentMessageDataStore,Us
rFriendlyDescPoolDS' ...
[java] [I] Configuring JDBC system resource 'CPoolDS' ...
[java] Error: No domain or domain template has been read.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\scripts\wlst\offline\config-domain.py", line 149, in ?
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 35, in configJD
BCSystemResources
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 51, in configJD
BCSystemResource
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 97, in hasJDBCS
ystemResource
[java] File "C:\scripts\Lib\script\common\wlstutils.py", line 99, in chec
kPath
[java] TypeError: string member test needs char left operand
BUILD FAILED
C:\scripts\build.xml:20: The following error occurred while executing this line:
C:\scripts\build.xml:431: The following error occurred while executing this line
C:\scripts\build.xml:743: Java returned: 1
Total time: 10 seconds

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

What is use of Conversion Routine in Abap dictionary

Hi,
Can any body please tell me the proper use of <b>Conversion Routine in Abap dictionary.</b>
Please give me a practical example where it has been used.
Thanks
prabhudutta

hi,
here is help for conversion routine
Conversion takes place when converting the contents of a screen field from display format to SAP-internal format and vice versa and when outputting with the ABAP statement WRITE, depending on the data type of the field.
If standard conversion is not suitable, it can be overridden by specifying a conversion routine in the underlying domain.
A conversion routine is identified by its five-place name and is stored as a group of two function modules. The function modules have a fixed naming convention. The following function modules are assigned to conversion routine xxxxx:
CONVERSION_EXIT_xxxxx_INPUT
CONVERSION_EXIT_xxxxx_OUTPUT
The INPUT module performs the conversion from display format to internal format. The OUTPUT module performs the conversion from internal format to display format.
If a screen field refers to a domain with a conversion routine, this conversion routine is executed automatically each time an entry is made in this screen field or when values are displayed with this screen field.
regards,
Raghavendra

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

Currency conversion issue while creating PO from Shopping cart

Hello Experts,
I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
Scenario:
Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
Please give me some idea how to fix this issue.
Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
Regards
Pratap J

Hello,
Read information available in KBA 1862453.
It mentions this issue.
Regards,
Ricardo

RESTRICT USER FROM USING SAME REQUIREMENT TYPE WHILE CREATING SALES ORDER

Hi Friends,
I Have a requirement to in SD while creating any sales order i want the system sholud throw a error
message when i am using line items having same requirement type more than one time
i have tried some customer exits v45a0001 & v45a0003 . but was not successfull .
kindly somebody help me with elaborated steps .
thanks in advance .
regards
digvijay rai

no reply and i am to close this thread so i am putting it as answered ;(

Use the authorization object while creating RFC

Hi All,
I'm able to create a RFC, can login from one sap system to another sap system and use the following FM. Here my concern is how to make the RFC more secure, i mean any user can access the target system with my login. Meanwhile came across a authorization object text box in the LOGON and SECURE tab while creating RFC.
so please put on light on how to authenticate the specific user to logon using the RFC.
Thanks in Advance.
Regards
Lalitkumar.

Hi Lalit,
Usually for RFC connection will be done with the, user type   system user type (means,they should not be able to login to system thru GUI)
2. Even if the user know the login id / password, he should have auth to create RFC like (SM59 and related auth objects)
and even for remote connection also we have different auth to restrict
3. These type of authorization will be given to basis guys only.
4. Logon/Security
             Lang-En
             Client-` client no
             user- user
             Password - bw password.
Here you will be specfying the user id ( system type) / password for connecting from one system to another.
and in next tab you can do Test connection.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a08fbe33-0501-0010-2d9c-fb37e9795fd9
Thanks,
Sri

Use of Condition update while creating Condition Records

Hi Experts,
I have to maintain MRP for a product which will be applicable for only 1 particular order. after which system should pick up old MRP.
By using CONDITION UPDATE feature , i have tried to do it , but once maintained , its always picking new MRP for every order.
(If it being a record where only new price to be defaulted in one order and no need to create 2nd order , this is ok ., but not in my case)
Can any one suggest me how to go with this
Thanks in advance,
Jignesh

Hi,
This can be done using the CONDITION UPDATE
In the condition type check the CONDITION UPDATE AND SAVE IT
While creating the CONDITION RECORDS, maintain the values and click ont he ADDITIONAL DATA (F7) then maintain the value in the field MAXIMUM NUMBER OF ORDERS , PUT The sales order as 1.
Then try
Please revert if you need further details
thanks,
santosh

Fixed value assignment while creating Domain

Hi All,
While creating a Domain with data type 'CHAR', No. characters 13, in Value Range > Fixed Value i had given 'TEST_MATERIAL' but it only takes first 10 Characters (TEST_MATER). I wan to display all characters.
how can I solve it.
Points Assured.
Regards,
Suresh

Hi here the problem is not your length.
The standarad SAP length for the value field is 10. So even if your domain has length more than 10 the value field cannot accomodate that length.
So no option ... you must go for Value Table.
Also the fixed ranges are mostly for numbers... tht's why they have fixed the max length as 10 which is large in case of numbers...
Better to go for Value Table. I have tried that and is working fine.

Use of the Export while creating Exceptions in the Reporting Agent

hi all,
can anyone let me know how the Follow Up Action "Export" is used while creating Exceptions under the Reporting Agent.
I understand that for the data that was precalculated to be used as a work item in a customer Workflow, it first needs to be exported using the business Add Ins (SE19). i have created the Business add In "RSRA_ALERT" and have also set a filter according to the InfoArea and activated it.
But once, the package is scheduled and completed, wherefrom will i check the result and how do i check whether that data has been exported or not.
Kindly let me know at the earliest.
Thanks & regards
Manicks

Hi,
See if it helps -
http://help.sap.com/saphelp_bw33/helpdata/en/24/77643c07437c7fe10000000a114084/frameset.htm
regards
Vikash

Use resource user attributes while creating a user

Hi All,
I'm developing a resource adapter for our rescource, and need to input attribute to real create that user in the rescoure. by modify skeleton resource adapter I have no where to fonud the field to input attributes for my resorce user, but for ldap there is form in tab Attribute for ldap user create, how can I do same thing in my adapter?
Thanks a lot,
Alice
Message was edited by:
Alice_1234

If you are creating PO in foreground, you dont have the option of giving user id.
But if you create POs in background using a scheduled job, then when you are scheduling the job, you can overwrite the default user id and give the user id you want. In this case all the POs created by the job, will have the user id created by you.
But if you have to create a PO through background job, you have to give the inputs to PO through some programs may be BDCs or LSMW.
Reward if this helps. you

Problem in copy routine while creating the follow up to Servcie Request

Hi,
I am creating Lead as follow up from Service Request. I have partner functiona called Reporter in Service Request. Now what ever the value is there in Reporter I need to copy it into Contact Person of Lead. However, I am not seeing any method to update the contact person in COPY ROUTINE BADI.
Can you please help me.
Thanks,
Sandeep

hello, in the COPY ROUTINE BADI, you don't need the method special for partner. You can set the parnter of new document by CRMD_ORDER_MAINTAIN.
In the function, you only need the new document guid handle, and the partner guid which you want to set in the document, and partner type.

Use of Third Party while creating Technical System

When I am creating new technical system it asks to enter the technical system type. I want to when to use Third Party. Can u all throw some light on Third Party.......??

hi
refer this help on thirdparty system
http://help.sap.com/saphelp_nw04/helpdata/en/fa/0aad3efa11b300e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

USE OF CONVERSION ROUTINES WHILE CREATING DOMAIN

Similar Messages

Maybe you are looking for