Use of DV and HDV cameras with Final Cut Express

I have both a DV and HDV camera. How do I switch between one and the other in FCE?
Somehow I was able to change FCE to work with my HDV camera but now, when I want to work with my DV camera (to print an edited piece to video tape, for example) FCE keep telling me it cannot find the HDV camera.

Thanks for your response. Dumb question. I edited a piece while FCE was set to HDV (although the original video was not HDV -- it was a transfer from 8 mm home movies) so I assume FCE thinks the video is HDV. Just how, then, do I put the edited sequence into a new DV sequence? As you can see, I'm fuzzy about the finer points of FCE. Thanks.

Similar Messages

  • Using a Flip video camera with Final Cut Express

    I've just recently bought one of those flip video cameras (http://www.theflip.com) which is great, but I can't seem to get the footage imported into Final Cut Express without it then needing to be rendered when I place it on the timeline.
    Does anyone have experience using this camera with FCE, and if so, which settings did you use please? I've tried tweaking most of them with little success.
    Thanks!

    Hi Simon,
    in addition to Martin's instructions I suggest you to make sure, in MPEG Streamclip:
    - you actually select Export to QuickTime (not Export to DV)
    - you set the right frame rate (frequency), that is 29,97 for NTSC.
    Personally I usually set Interlaced Scaling checked, and Deinterlace Video unchecked, but I'm not sure these are the right settings in your case.
    With the above settings you should be able to import the resulting video into FCE without requiring any initial rendering, if the FCE Easy Setup is DV-NTSC.
    Warning: I use MPEG Streamclip 1.8 (the latest as fa as I know) where the Frequency parameter is in the Export main window.
    Piero
    Message was edited by: PieroF

  • Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express.

    Does anyone of you use a HD-camcorder like Canon Legria HF G10 and cut films with Final Cut Express 4.0.1. I did not buy this product yet but ask before. Now I have 4GB RAM and i5 MacBooK Pro. Do any problems exist using FCE having made films with this camera?
    I save the films als QuickTime films (mov) and create DVDs with iDVD.
    Will the data be too many if I make films with such a camera (HD) so that 1 hour of film cannot be burned to one DVD (or if is not necessary to film with such a good quality because in iDVD the film looses its quality?).

    I was able to find this info regarding the camera:
    AVCHD 1080/50i. 1080/25P (Maximum AVCHD 24Mbps)
    Recording Modes
    MXP 24Mbps / FXP 17Mbps / XP+ 12Mbps / SP 7Mbps / LP 5Mbps
    The 1080/50i (interlaced) modes will work with FCE. PAL in this case. 60i is NTSC.
    Al

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • Which codec to use for editing AND motion graphics (ala Final Cut Studio)?

    I have a prosumer-level AVCHD camcorder (Panasonic HDC-TM700) and am working with Final Cut Studio. After doing a great deal of research it appears that there is NO real benefit to using any codec other than ProRes 422 for straight editing (a camera at this price point doesn't shoot images of a high enough quality to warrant using 422 HQ, which also requires more processor power, and not only does 4444 require rendering it also takes up a ton of space). However, I have read (many times) that there may be some benefit to using 422 HQ if I am doing motion graphics work (ala Motion 4). Can anyone verify this? Would it make any discernible difference when shooting with a camera like this? Even though it is a prosumer camcorder I am trying to squeeze as much value as I can out of the entire production.
    Any input or advice?
    Thanks!

    Please don't double post.
    http://discussions.apple.com/thread.jspa?messageID=13122088#13122088
    x

  • How do I import an AVI file for use with FInal Cut Express

    How do I import or use an AVI file with Final Cut Express?
    Thank you. Do I need to convert my AVI file and what is the
    easiest way to do that? Thank you.

    You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

  • Can I use IMovie HD 6.4 with Final Cut Express?

    Can I use IMovie HD 6.4 with Final Cut Express?

    Hi
    Yes and no.
    You can't get an editable material over from one to the other.
    eg a misspelled word in iMovie project can't be corrected in FCE/P any version.
    I use iMovie combined with FCE/P in just one case when there are to many drop outs
    on the raw material eg recorded in LP-mode (90min on a 60min tape)
    Then iMovie can import in a more forgiving way.
    BUT
    When this material is moved over to FCE/P the audio parts needs to be rendered
    not just one time but whenever any change is done. A very nearv-wrecking and tedious
    procedure.
    Summary. Joint project should use same platform. In my cases me and friend has
    each one full version of FCE4 and an external hard disk that contain the movie
    project.
    This we exchange with each other to do each the parts that we are on best to do.
    Yours Bengt W

  • Compatibility issues with Final Cut Express and Final Cut Pro

    I'm getting ready to edit a project and I was wondering if there are any compatibility issues with Final Cut Express and Final Cut Pro. I've never used Express put I assume I would be able to make cuts, simple effects and titles. Is this correct.
    If I transfer project files from one platform to the other will i run into any issues?
    Thanks for all and any help.

    {quote:title=cuttingedge wrote:}
    If I transfer project files from one platform to the other will i run into any issues?
    {quote}
    Although they operate in a similar fashion that are not fully compatible. You can open a FCE project in FCP, but once you've edited it in FCP you can't go back to FCE.

  • Using Vado HD with Final Cut Express

    I am aware that the VADO HD is not compatible with iMovie, but is it compatible with Final Cut Express? If so, during setup of FCE what option should I use for setup? HD, NTSC, PAL, Apple Intermediate Codec, or DV/Panasonic and then under "use" which option should I use?
    thanks for ALL of the help!
    tom

    crap.
    Ok, maybe you can answer a follow up question. So, I'm new at this.... but I understand that I will have to convert the video then. In that case, is there an optimal video conversion type that I should use so that I lose the least quality? I am using MPEG Streamclip as my conversion tool.

  • Can Motion be used with Final Cut Express?

    I am needing to add a little more advanced graphics and I am wondering if I bought Motion, would it be able to work with final cut express HD or would I have to upgrade to the final cut studio pro suite?
    Any suggestions or advice would be greatly appreciated.
    Thanks!

    Hi(Bonjour)!
    Be careful with used copy, Motion 1 and 2 were sold as single product in the past, not from a editing suite like Final Cut Studio 2 or 3. There was an upgrade from Apple: Final Cut Studio 5.1 that gave the intel support for those applications included in studo bundle. So, used earlier version of Motion may be not usable on your intel mac without the FCS 5.1 upgrade.
    The graphic processor card compatibility must be checked too.
    I would go with a used copy of Adobe After effects, may be 6.5 or 7.
    Michel Boissonneault

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • Can you use the Logickeyboard Final Cut Pro X Shortcut Keyboard with Final Cut Express 4?

    I'm just wondering if the Logickeyboard Final Cut Pro X Shortcut Keyboard can be used with Final Cut Express 4???

    If you mean are the shortcuts the same:
    No they are not.
    Al

  • Compatible HD movie camera for final cut express

    I am in the unenviable position of having a ten year old who is savvy in Final Cut (has used it on a friends computer) and has now begged for the program for his birthday (this week). So I bought the program but now his camera has broken - can someone please please recommend a relatively cheap HD recorder that would work with final cut express (something under 500 pounds would be awesome ie under 700 USD) - finding the info online not all that helpful and have been to Apple store in London and NY! to ask which camera they would rec. but they cant recommend one (brand favourite). Be so grateful if you could help.

    Hi and welcome to the forum!
    The only HD formats FCE supports are HDV and AVCHD. You should be able to find middle-end models of both for under 500 pounds. I'd recommend asking your son whether he prefers the idea of the traditional tape based camcorder (in this case HDV) or wants a hard drive based camera (AVCHD). Both will work fine with FCE, and you could then do a quick and easy search on the website of your preferred manufacturer (Canon, Sony, Panasonic, etc.) or visit a local store to pick out one that works with your budget.
    I could arbitrarily choose a camera for you to purchase, but without knowing your needs it really would be better for you to use this information to pick out one that you like. Just be careful - if you do go for AVCHD make sure the camcorder is actually AVCHD, and not a variant like AVCHD Lite or AVCCAM. Only pure DV, HDV, and AVCHD will work with FCE.

  • Issues Capturing with Final Cut Express

    Hi
    I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

    When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
    Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
    Have you used the Thunderbolt port successfully with other Thunderbolt devices?
    I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
    http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
    MtD

  • Does the DCR-SR62 30GB Sony Handycam work with Final Cut Express hd 3.5?

    Hi,
    I am a new mac user and I want to get a good camera that will work with Final Cut Express hd, I am currently looking at the DCR-SR62 30GB and the HDR-UX1 dvd both by sony and I would like to know if these to cameras or one of them will work with Final Cut Express Hd. Thanks.

    Niether one of these cams are the best choice for FCE. FC can not directly work with either DVD or HD (as in Hard drive) camcorders. You will have to convert and/or rip the output of either camera, giving you an extra work step and perhaps diminishing the quality of your footage
    FCE is designed to work with DV/HDV material ... from a tape, throught a Firewire connection
    There is software like MPEG Streamclip which will allow you to convert those cam's output to work with FC but if you haven't bought them yet, I would hold off and look at a good quality tape based cam

Maybe you are looking for

  • HT201209 If I'm not in U.S, how can i use the iTunes Gift Card?

    Hi, Please help me! Last time my iTunes Store Account was registered in Singapore, So, all of my informations, billing address are affecting with SG iTunes Store. But now I am at another country, not in SG, That country don't have any credit card sys

  • How to add a input parameter in Web Intelligence ?

    Hi, I create a report in Web intelligent rich client and I want to prompt user to input a parameter such as report date then show this value in a report cell. Please tell me how to do ? Thanks Mau Vu Huu

  • How to check the sql:query is return null value

    I have use : <sql:query var="sql1" dataSource="${db}"> select col_name from table_name where a=<c:out value="${row.test1}"/> and b='<c:out value="${row.test2}"/>' </sql:query> So, how can I check this statement return null value which is no record wi

  • How to create a check box that will result in text being hidden or visable?

    I am creating a PDF form and have a section where a reference needs to be entered. My problem is that the references are each several lines long therefore I cannot use a drop down for the user to select. To combat this I want to have 3 check boxes, e

  • HOw to achieve this at report/query level

    Hi Experts Please update me how can i achieve this at query level Lets Consider Data in my Cube Dept_id--Date-- Qty -101.01.20093----- -101.01.20095----- -101.01.20098----- -101.01.20091----- -101.01.20099----- That is how data is avaliable in my cub