Use of KM services and TREX Search Engine From share point portal

Hi All,
We would like to  Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : <b>[email protected]</b>
Thanks in advance
Regards
Swarna B

Hi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K.

Similar Messages

  • Sending query to third party portal from TREX Search Engine

    HI Experts,
    we need to implement normal search option in SAP portal.
    when we search any thing from portal ,
    It has to search in EP & KM and also it has to search
    windows sharepoint portal and bring the data back to SAP Portal.
    For this purpose one solution is
    1) implementing  enterpise search,
       but my client dont want to go for enterprise search(federated search).
    2) The other way
    Sending query to third party portal from TREX Search Engine
    In this way what i want is ,
    how TREX can send query to third party portal SEARCH ENGINE
    (in my case share point portal search ENGINE).
    There is no problem to search in EP & KM becuse it is default.
    To search in Micro soft Share point portal,
    TREX should pass the query to share point portal search ENGINE.
    Is there any API TO send a query to third party portal like sharepoint?
    I searched in SDN and Other sites also but i am not getting exactly what I require.
    If any one has ideas or implemented already please guide me.
    My client require searching option like this,
    we need to provide drop down box in SAP Portal with 3 options like
    1) search in Share point portal
    2) search in SAP EP & KM
    3) Search in both the portals
    please provide any code samples in case if you have.
    please help me , its urgent
    Thanks in advance.
    Regards
    Bala

    Hi Bala,
    please check the information on the KM IMS (Index Management Service) in KMC's developer guide. A connection to a 3rd party search is done from KM, then calling TREX and XY in parallel, not serially from TREX.
    Here's a paper describing this for an older KM release:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5e514b57-0701-0010-3796-deb3636835fa
    Regards, Karsten

  • In the search section of the tool bar, I used to have Google as my search engine now it is Norton Safe Search. How can I get Google back?

    As stated above, I used to have Google as my search engine now it is Norton Safe Search. How can I get Google back?

    See these threads about searchqu:
    *[/questions/816181]
    *[/questions/790833]

  • What IP address Bing is using to provide Safari's "search engine from providing suggestions." ?

    When you use Safari, you will find that Search engine can provide you with suggestions like this . For example, I am using Bing.
    How can I know what IP address Bing is using to provide those suggestions?

    >open a new tab
    >type about:config in the address bar
    make sure
    1: browser.fixup.alternate.enabled should be false
    2: keyword.enabled should be true
    3: keyword.URL should be http://www.google.com/search?ie=UTF-8&oe=UTF-8&q=

  • How do i get Google and yahoo search engines to stay on Top Sites?

    How can I get Google and Yahoo search engines to stay on "Top Sites"?

    You pin the site to the top sites tiles
    1. Hover your cursor over the site on top sites you want
    2. Wait for the two buttons to show up in the top left corner
    3. Tap the one with the pin so it highlights in blue
    Regards,
    Noahwhite2014

  • Only Yahoo and Bing appear in the search box and the Search engine manager only shows them too.

    No matter what I try, only Yahoo and Bing search engines appear in the search box top right on Firefox. The Search engine manager only shows these two engines as well. I want to add Goggle and have not been able to. The default restore in the Search engine Manager is "Greyed out". What can I do to fix this ?

    If those search engines are also missing in the searchplugins folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\) then a (re)install should restore them.
    If they are present then try to delete search.sqlite and search.json in the Firefox Profile Folder.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Unable_to_search_or_add_new_engines

  • Help get rid of Bing search engine from macbook pro os 10.7.5

    Help me get rid of Bing search engine from macbook pro os 10.7.5
    fmartn67

    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password. Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib
    /usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib
    ~/Library/Application Support/com.genieoinnovation.Installer
    ~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller, while lying about what it does. As he knows and intends, the uninstaller does not completely remove the malware.

  • How do I stop other search engines from continually hijacking the firefox browser?

    I'm fed up with this happening and not being able to get back to firefox without significant drama. Is there some way I can set up a permanent barrier, and it it malware that's causing the problem?

    Permanently? Hardly. However, you could store some settings (like search engine, default start page) in user.js file (in your Firefox data folder).
    Sadly, some malwares use the same trick to hijack search engines as well.
    If you think the hijack is due to malware, run Spybot and adwcleaner.

  • How do I change my default search engine from Google to Start Page?

    I don't like to use Google because there are privacy issues which Google is only too happy to violate and hand over to parties I do not want.
    I want to be able to use StartPage instead of Google when I type something in the URL space and I want StartPage to be my default home page (already is), default small box search (already is) and defalut search engine (which it is not).
    Thanks!

    See:
    *https://support.mozilla.org/kb/Location+bar+search
    Note that starting with Firefox 23 it will no longer be possible to specify the search engine for the location bar via the keyword.URL pref.
    In Firefox 23+ the search engine used in the location bar is the search engine that is selected in the Search Bar.<br />
    You can consider to use a (one letter) keyword search for searching via the location bar.<br />
    You can set a keyword for an installed search engine via Manage Search Engines (click the search engines icon on the search bar).
    *Bug 738818 - consolidate Firefox search preferences
    <i>Please DO NOT comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

  • Running Firefox 10.0.2, cannot add new search engines from Mycroft Project. Error message: "you will need a browser which supports opensearch to install this plugin" Please help with steps on how to fix this issue in Firefox, thank you

    Can't add new search engines from Mycroft Project in FF 10.0.2. Error message states: "you will need a browser which supports opensearch to install this plugin"

    You're welcome.
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • [svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

    Revision: 2692
    Author: [email protected]
    Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
    Log Message:
    Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
    QA: Yes
    Doc: No
    Checkintests: Pass
    Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-227
    Modified Paths:
    blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
    blazeds/branches/3.0.x/qa/build.xml

  • Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

    Hi All,
    I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
    When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
    When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
    What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
    Thank you!
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

    Hi Andreas,
    Thanks for the reply.
    The link you put up, takes me to the page, but
    "The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
    That was WaterFox.
    The webpage cannot be found
    This in Internet Explorer 11.0
    The Files in question were Recorded by Beyond TV to my Local Hard Drive.
    When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
    When I use Windows Media Player, nothing can be heard from the Rear Speakers.
    Speakers and Hardware are working fine.
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

  • Safari will not prevent search engine from providing suggestions, even though that block is checked in Privacy preferences.

    Safari will not prevent search engine from providing suggestions, even though that block is checked in Privacy preferences.

    I also seem to have having this problem, despite having checked the "prevent" option in Preferences. Typing words into the Safari search bar (NOT the Google search bar on one of Google's search pages) leads to suggestions being made:
    as well as connections being made to lhr14s21-in-f7.1e100.net:
    which http://66.161.36.140 suggests resolves to a Google IP address block.
    I'm using Safari Version 6.0.4 (8536.29.13) on Mac OS 10.8.3.

  • Did anyone else notice the new Iain Banks Audiobook Use of Weapons appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

    Did anyone else notice the new Iain Banks Audiobook 'Use of Weapons' appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

    Did anyone else notice the new Iain Banks Audiobook 'Use of Weapons' appear and then quickly disappear from the store a few days ago, or did I imagine the whole thing?

  • HT4557 I have a MacBook Pro using my Apple ID and Password, can I home share with my wife's iPad that uses her Apple ID and password

    I have a MacBook Pro using my Apple ID and Password, can I home share with my wife's iPad that uses her Apple ID and password

    You have to all be signed into the same Apple ID and on the same WiFi network, but yes you can do it. You have to sign into her Apple ID on your iPad in the store settings.

Maybe you are looking for