Use of layout when more than one parameter - Error Missing Parameter Values

Hi,
Is it possible to use a crystal report which has more than one parameter as the layout for the bill of materials report.
I have 3 parameters
       1. DocKey@       The Bill of Materials to be printed
       2. Number of levels to be printed
       3. type of levels to print.
When I try to print it gives me the error Missing Parameter Values.
I have tried changing the DocKey@ to CodeKey@ but the same error.
Does anyone now where to find a list of these tokens?
Thanks
Chris

I looked at the crystal report conversion to try to find what parameters it used and found none.
I have managed to create and use a crystal report to replace the production order using DocKey@ as the parameter.  This works within SAP.  However I have converted the system production order to crystal reports and from the converted report I cannot see any parameters at all.
How and where can you find out what paramters you need to use to replace any PLD report?  Several reports have multiple selection criteria before the report prints.  How can you find out what their tokens are called?  I am starting to pull my hair out.  I am getting great help from this forum, but do you know any documentation which actually explains this area.
Thanks
Chris

Similar Messages

  • How to set the Certifcate to use for SSL when more than one available?

    I apologise for bad wording of question.
    We have a 11g Directory Server and when we created the directory instance it generated a self-signed certificate. very nice.
    We have recently requested and installed a CA signed certifcate, so we now have TWO certificates in the directory certificate store. Default Certificate and the new Server-Cert (the CA signed one)
    LDAP clients STILL seem to be presented with the self-sgned certificate though.
    Simple question... how do I make my Server-Cert the 'default' certificate presented to LDAP clients ???
    I would rather not delete the self-signed cert if possible.
    I cant find any documented method to achieve this.

    # Listing Certificate
    $ /certutil -L -d <path>/slapd-abc/alias -P slapd-
    # Add Trust by adding CT
    $ certutil -M -n "GeoTrust DV SSL CA" -t CT,, -d <path>/slapd-abc/alias -P slapd-
    # Verify the setup.
    $ certutil -L -d <path>/slapd-abc/alias -P slapd-
    ( You should see the CT beside the relevant cerficate, making it default for SSL communication )
    GeoTrust DV SSL CA CT,,
    Link : http://docs.oracle.com/cd/E19656-01/821-1504/6nmg10b6g/index.html ( Look around for different steps for configuring SSL )
    JPrince

  • Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

    I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
    is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
    Please let me know mitigation for this blockage issue.
    Should I use begin transaction and commit transaction statements/ shared lock statements.
    please reply

    Hi,
    run same query at the same time?

  • Using Adobe apps on more than one account?

    Is there a fix forthcoming for the problem running CS4 on Leopard, where you can't use Adobe apps on more than one user account at a time (via fast user switching?) When I switch over to my 2nd account, I get some sort of "licensing error" dialog unless I quit all Adobe apps in my first account, which is incredibly annoying.
    Thanks.

    Greg,
    Adobe's single-user licensing allows for your installation and
    non-simultaneous use on two computers. And the software may think that two different users are trying to use the software simultaneously. You might try contacting Adobe tech support and ask.
    Neil

  • Using Ipod Nano on more than one Comp

    Can you use IPOD Nano on more than one computer? I tried but on my computer at work, I cannot transfer from IPOD to computer, only computer to IPOD
    Please Help!!

    I should be able to play it where ever I want
    And you can. Just burn it to a data CD, or transfer it to the other computer using a thumb drive, or use networking to transfer it, or even use the Hard Drive feature of the iPod to transfer it. Nothing stops you from doing any of those, and then when it's on the other computer you can play it there just fine.
    12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+   Mac OS X (10.4.4)   3G iPod, iPod shuffle, iPod nano

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • How can i use Itunes to update more than one IPad with more than one owner

    How can i use Itunes to update more than one IPad with more than one owner?  I own an IPad and my wife owns an IPad.  I want to use my system to update both IPads.  We have different Apple Accounts and different applications.  Is this possible?

    Of course, that is too easy.  I am such a bonehead.

  • Can't use the iPod on more than one computer!!!!!!!

    Ok, This has got me so frustrated! We got an iPod and installed iTunes. We thought we had it figured out - we purchased music from iTunes, played it on the iPod and everything was great. Then plugged the iPod into my other computer to listen to our music and it won't freakin' play! says the computer is "Not Authorized" and suggests that by 'authorizing' the 2nd computer, it will overwrite the songs that are already on the iPod. This is NOT desirable. We've downloaded and installed iTunes onto the 2nd computer and used the same login account that we used on the first computer.
    What gives!?!?! I thought this was supposed to be easy, but it's not! I was hoping for a quick and simple "plug it in and start listening to music." This is definately not quick and simple. Albeit, I'm new to this iPod craze, but this shouldn't be so difficult. I've poked around on the website and cannot seem to find an answer to this.
    HELP!!!!
    Thanks
    oh btw, Is anyone else getting annoyed by Apple's rediculous attempt at monopolizing this market by forcing us to use thier own proprietary software?!?!

    First of all, any computer that plays purchased content must be authorized. This can be accomplished by opening iTunes, then store>authorize computer. If you wish to use your iPod on more than one computer & not have your iPod content erased, you will have to have your iPod preferences set on "manually manage". See the following link.
    http://docs.info.apple.com/article.html?artnum=61675
    Also, it's not only Apple that uses proprietary software. How about Zune players, & several others?
    Message was edited by: StarDeb55
    Message was edited by: StarDeb55

  • How to Use Adobe Pro on More than One Computer

    If I am a subscriber, can I use Adobe Pro on more than one computer?

    2 activations allowed - Cloud License http://www.adobe.com/legal/licenses-terms.html

  • Using colorTrans:ColorTransform on more than one movie clip

    Hi I am very new to Flash and action script so please bare with me...
    I would like to be able to change the color of more than one movie clip in the same layer in the same frame. Basically I have place two different movie clips with defined instances,i.e. body and shoulder onto the canvas in one frame on the timeline.
    I have created three different buttons (red_btn, blue_btn, and yellow_btn) to use to change the color of say the body or shoulder. I would use red and blue to change the body and say yellow and green to change the shoulders. These are also on the same layer and same frame on the timeline as the movie clips.
    The problem I am having is how would I declare the two movies or variables to change independantly? Would I need to place one movie clip on one layer and then place the other on a different layer so that when I press the button I want i.e. the red button, it only changes the body and not the shoulders.
    Here is my actionscript that I am using to change the color of the clip(s)
    import flash.geom.ColorTransform;
    import flash.geom.Transform;
    var colorTrans:ColorTransform = new ColorTransform();
    var trans:Transform = new Transform(body);
    trans.colorTransform = colorTrans;
    blue_btn.onRelease = function() {
        colorTrans.rgb = 0x0000FF; // blue
        trans.colorTransform = colorTrans;
    red_btn.onRelease = function() {
        colorTrans.rgb = 0xFF0000; // blue
        trans.colorTransform = colorTrans;
    yellow_btn.onRelease = function () {
    colorTrans.rgb = 0xFFFF00; //yellow
    trans.colorTransform = colorTrans;
    body here is my declared variable wich is the body of a shirt that is one movie clip. When you place both clips on the timeline ontop of each other, you basically get a shirt with different color shoulders and body.
    I need some help to know if this is possible first of all, and then what would be the best way to delcare the variables in one actionsript.
    Thanks and I am sorry, I just never learned much when it came to flash. Thanks for any patience and help anyone is willing to give me.

    every movieclip has a transform.colorTransform property that you can use to assign a color transform (with any rgb property).  so, for example:
    import flash.geom.ColorTransform;
    import flash.geom.Transform;
    var colorTrans:ColorTransform = new ColorTransform();
    bluebody_btn.onRelease = function() {
        colorTrans.rgb = 0x0000FF; // blue
      yourbodymovieclip.tranform.colorTransform=colorTrans;
    blueshoulders_btn.onRelease = function() {
        colorTrans.rgb = 0xFF0000; // blue
    yourshouldersmovieclip.transform.colorTransform = colorTrans;
    yellowbody_btn.onRelease = function () {
    colorTrans.rgb = 0xFFFF00; //yellow
    yourbodymovieclip= colorTrans;
    etc

  • Can i use my ipod with more than one computer?

    i synched my ipod with one computer, hooked it up to another and it says i can't sync with more than one library? it says i have to restore it but i dont want to delete my music off of my ipod, i just want to add the music from this other library

    I have two different iPods and two computers. I regularly use either iPod on either computer.
    First set the preferences so itunes will not automatically sync when ipod is connected.
    Then connect the ipod and set itunes to manually manage music.
    Drag and drop whatever content you want to the device showing on the left.
    If this was the default setup, there wouldn't be all these posts about people losing all their music when they connect their ipod.

  • How do I use AE to allow more than one device with my cable modem?

    I connected by AE to my cable modem at my house in Japan and it works fine on "bridge mode," but only for one device at a time (this laptop, but not my iPod Touch, or vice versa). As soon as I connect a new device, it will kick the other one off. It seems that my cable modem here will only allow one device. Is there a way that I can use my Airport Extreme to allow more than one device and not have to pay the Internet provider extra for multiple IP addresses? How do I go about this? Do I select "share a public IP address" or do I select "distribute a range of IP addresses?" I tried these options but obviously wasn't doing it correctly, because then I lost the connection for everything... Thanks!

    It would be best if you "hard reset" the Airport Extreme to clear out the old and conflicting settings and then reconfigure it again.
    Hold in the reset button until you see the amber light begin to blink more quickly. Keep holding for another 3-4 seconds when you see this and then release the reset button. That will get the Extreme back to the original starting point.
    After you have powered the modem back up after the full reset, you will need to reconfigure the AirPort Extreme again. If you are using he guided setup in AirPort Utility, you will choose the option to "create a wireless network" during the setup.
    If you are using the Manual Setup, the Wireless Mode will be "Create a wireless network" and the setting for Connection Sharing would be "Share a public IP address". Adjusting the Connection Sharing setting would be the last thing that you do before you click Update to save settings.
    Here, I am assuming that you have a simple cable modem (it will have only one ethernet port), correct?

  • HT5622 Can Face Time be used to connect with more than one person at a time?

    Can I connect with more than one person at a time when using Face Time?

    You mean like a conference call?  No, unfortunately.

  • Use of software on more than one computer

    Hi, all I would like to find out is if I can use my monthly subscription to Photoshop on more than one machine at home and whether there are discounts on subscribing to a second product when the first has been set up already?

    You can use PS on two different computers, and with the subscription, you they don't have to be the same platform.

  • How to return more than one record through OUT parameter in procedure

    Hi,
    I want to create a procedure which accepts one input and returns more than one record as output.
    example:
    Input = DeptNo
    Output= Empno,ename,sal,comm,job
    Scenario:
    There can be more than one employee in department we pass as the IN parameter. OUT parameter has to return all the records of the corresponding employee details in that department.
    Thanks in advance for your help
    Regards,
    K.Vijay

    -- I think you can try something like this using ref cursor:
    -- create a package for the type ref cursor and execute
    CREATE OR REPLACE PACKAGE PACK_REFCURSOR_FOR_TABLES AS
         TYPE DATA_TableRows IS REF CURSOR;
    END;
    -- after executing the package above, create your procedure:
    CREATE OR REPLACE PROCEDURE GET_EMP (
         IN_nDeptNo IN number,
         OUT_Emp OUT PACK_REFCURSOR_FOR_TABLES.DATA_TableRows)
    IS
    BEGIN
    -- leave query open (implicit) as this will return data
         OPEN OUT_Emp FOR
         SELECT *
         FROM tblEmp
         WHERE DeptNo = IN_nDeptNo;
    END;
    --execute the procedure and you're done                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for