Use of new tax code in PO of Earlier Period

We have an issue in Purchase order related to tax code. We created a new tax code with the validity period from 01.03.2015. Now the PO's which are of earlier date means document date of PO is earlier than 01.03.2015, validity period of Tax code causing the issue. I know this error coming because of validity period of Tax code. Now my concern is how we can use this tax code for earlier PO's.

You have maintained the condition records validity as from 01.03.2015 to 31.12.9999, then you should not expect that condition record will be valid for earlier than 01.03.2015.
If you want to use the calculation for earlier date than 01.03.2015, then of-course either you need to change the validity of the existing condition record or you need to create a new condition record which will be valid for the PO document date.

Similar Messages

  • UK Payroll new tax code 1000L

    Hello Friends:  
    In UK Payroll new tax code 1000L for year 2014-April 06th.  I have updated in Constant table V_T511K effective April 06th 2014 but this code is not going to Ceridian interface(PU12).  I would like to know where we need to apply this new tax code?.  Is there any OSS Notes?. Any help is appreciated. Thanks in Advance

    Please note that the tax calculation for UK payroll is done based on the tax code as maintained in IT0065 ,.
    Also please note the following :-
    Code 0T u2013 This code is used cumulatively with no pay adjustment and all pay is taxed according to the relevant rate dependent on the level of earnings
    Code BR  - This code means that all the employeesu2019 pay is liable to basic rate tax and there is no pay adjustment allowed
    Tables T5G01 and T5G02 are then used by payroll for tax calculation.
    Hope this helps
    Kind Regards

  • Creation of new tax codes

    I  have a requirement for creation of new tax codes. I have created new tax codes in FTXP and assigned G/L accounts in OB40. This part is clear for me.
    Now my questions are as under.
    1.     Where do i restrict the validity date for old tax codes and validity date for new tax codes.
    2     What needs to be updated in terms of condition records
    3     Is there anything needs tobe  update in info records for MM.

    Unless you use jurisdiction codes, and no external tax system, for
    example with tax procedure TAXUSJ, there is no validity dates for the
    condition records.  You can see this differnce by comparing the tables
    A003 without jurisdiction codes and A053 with jurisdiction codes.  A053
    contains the extra fields DATBI (key field) and DATAB.  This is the
    standard functionality.
    Please have a look at the following part of note 418582:
    " Changing past percentage rates has to be inhibited in order to avoid
    database inconsistencies. For this reason, the functions which allow you
    to transport time-dependent tax codes with percentage rates from the
    past are not supported."

  • New condition type, new tax codes

    I have created new condition type for tax procedure TAXIN. I have defined the account key for it. The condition type is basically for exempted input tax transaction. Then I created new tax codes by using the new condition type. The percentage of the tax codes is 0 as it is exempted.
    When I am trying to post invoice by using above taxcodes, it gives me error that the tax code is not defined in taxprocedure TAXIN.
    What could be the reason?

    Did you create the tax code in the development or prouction system?
    If in development you need to export the tax code by going to FTXP and selecting Tax Code -> Transport -> Export. Then when you release the transport you should go to the Production system and select Tax Code -> Transport -> Import.

  • New Tax code Creation for CST(Condition type

    Hi Friends,
    I am facing an issue during creation of new Tax-code for CST; condition type JIN1. After defining the tax percentage; system is picking an automatic G/L account, which is a grey field and can't be editable. We need to change G/L account and need to assign a new one.
    Can you please tell us how can we remove the default assigned and non-editable G/L account.
    Your support is appreciable.
    Rgds, Krishan Raheja.

    Hi Krishnan,
    Use transaction OB40, here double click on the Account Key (you can check this account key assigned to condition type in OBQ3 and also in FTXP screen) that is mapped to condition type JIN1 and enter your chart of accounts. Now change the G/L account you want.
    Chintan Joshi.

  • New tax code transport to one server to another

    Hi all,
    Could you please let me know for transporting customisation like new tax code from development to testing and testing to production what is the procedure and which type of request it need customisation request or workbench request.

    Important note on transporting tax codes -> F1
    Message no. F4794
    Transporting tax codes requires manual postprocessing. This postprocessing is also necessary if tax codes have to be transported from one client to another within the system.
    When tax codes are transported, the tax rates of the tax codes are transported using auxiliary table T007V. Logical transport object FTXP is used to transport the definition data of the tax code from table T007A and the language-dependent name to table T007S.
    The tax accounts for the tax codes (table T030K) are not transported.
    The internal jurisdiction codes are also not transported.
    The transport of tax codes between systems or clients consists of two steps:
    1. Step:
    Export tax codes from source system or source client
    2. Step:
    Import tax codes into target system or target client
    1. In the source system or client, in Customizing for the Financial Accounting Basic Settings, choose Tax on Sales/Purchases -> Calculation -> Define Tax on Sales and Purchases Code.
    2. Choose Tax Code -> Transport -> Export.
    3. Assign the export to the relevant transport request and make a note of the request number.
    4. Select and save the tax codes to be transported.
    5. Make sure that the selected tax codes have the transport number in table T007V.
    To check the table, in the SAP menu choose Tools -> ABAP Workbench -> Overview -> Data Browser.
    Enter the table name. The tax codes are in the MWSKZ fields, the tax jurisdiction codes in the TXJCD fields.
    6. Arrange the transport of the request to the target system.
    To transport the request, in the SAP menu choose Tools -> ABAP Workbench -> Overview -> Workbench Organizer -> Environment -> Customizing Organizer.
    1. Make sure that the transported tax codes are recorded in table T007V of the target system or target client.
    2. In the source system or client, in Customizing for the Financial Accounting Basic Settings, choose Tax on Sales/Purchases -> Calculation -> Define Tax on Sales and Purchases Code.
    3. The tax codes should have been created in the target system without a tax percentage rate by the import.
    Otherwise you can do this manually:
    In the target system, create the tax codes that do not exist there.
    Create the tax codes completely, but without tax percentage rates.
    If you use internal systems in company codes in the USA or Canada, the relevant tax jurisdiction codes should also exist. You make the settings for the tax jurisdiction code in Customizing for Financial Accounting Basic Settings under Tax on Sales and Purchases -> Basic Settings -> Define Tax Jurisdiction Codes.
    4. Choose Tax Code -> Transport -> Import.
    5. Check the proposed values for the transport request and country.
    6. Run the import.
    Notes for the transport of tax accounts
    When you transport tax codes between different systems or clients, no tax accounts are transported.
    Adjust the tax accounts in the source and target system (or source and target client) manually.

  • Create new tax code

    How to create new tax code for Import tax  + 2 % CST with the following details:
    Quantity                                        Basic rate                      Amount
    15595                                             0.50                               7798
    Custom duty  BYP                           4%                                 292                 NCR
    Basic Excise duty                           10%                                809                   CR
    Edu. Cess on BED                            2%                                16                     CR
    Sec.Ed. Cess on BED                       1%                                 8                      CR
    Edu. Cess on TOT 2% BYP                2%                                23                    NCR [29280916+8]*2%
    Sec.Edu. Cess on TOT 1% BYP         1%                                 11                    NCR  [29280916+8]*1%
    CST                                                       2%                              179                      NCR
    Thanks & Regards,

    What is the tax procedure you are using? Is it TAXINN? If yes then you need to define condition Types in OBYZ and mainatin the same in TAXINN,
    in Create Tax Code E1 and in FV11 maintain Tax rate for this Tax Code against Condition record of Excise and CST.
    Hope this helps!!

  • How to create new tax codes

    how to create new tax codes
    Service Tax 4% on 33% VAT 4% on 90% Non Deductible
    Service Tax 12.24% on 33% VAT 4% on 90% Non Deductible

    Hi Anil,
    This is an example from Italy:
    Local purchases 20% 40% recoverable
    Base Amount                                                     100    0         BASB
    Round.Up Output Tax             MWS                    110    100       MWAI
    Input Tax Round.up                VST        8.000      120    100       MWVI
    N.d.input tax                         NAV                      140    100       MWNI
    Non-ded.InputTax -RU            NVV       12.000     150    100       MWZI
    Acqu.Tax Outgoing-RU          ESA                       200    100       NLAI
    Acqu.Tax Inc.- Ro.up             ESE                       210    100       NLVI
    VST is the deductible tax and NVV the Non Deductible tax.
    I hope that you can use this and that you don't have to change your calculation procedure.

  • New tax code for non excisable plant

    Dear all
    Please suggest solution for following scenario
    We created new comp. code and assign new plant, this plant is non excisable, my problem is that can I used same tax code which is I created earlier for first co. code or I have to create new tax code for new plant, these taxes I have to inventories on material, I am using tax inn and tax classification ***.sequence.

    Hi Vipin,
    from my point of view you can use the same tax codes.
    to inventorise the duties you have to make little change in the process.
    while doing GRN if the material is excisable then the tabs will open. now you have to go to excise item tab and there you have to choose noncenvatable in the dropdown menu that is the material type.
    in this way you can have the results you need.
    Adwait Bachuwar

  • New tax code assignment to company code (sales module)

    VAT % IS CHANGED TO 14% FROM 01.04.2011.

    Tax code is not going to be assigned to company code.Tax code will be created for a country.
    Condition records will be maintained by using this tax code or percentage/amount will be determined for this tax code which is maintained by using the T.code FTXP.

  • New Tax Code required

    Dear Expert,
       Our user has a requirement for creating a new tax code
    requirement is -BED_5%, ECS_2%, SECS_1%, VAT_D_3% (Input)
    I have done- in FTXP i have created a new tax code i.e. BT then i hv assign with co.code, what will be next step in FV11 can U tell me ???
    Thanks in Advance !

    As per your new tax code the condition types used in the calculation procedure for the TAX code you have to maintain condition record in FV11.
    Like for BED you have usen suppose JMIP condition type then go to FV11 and give JMIP condition type there and select country and Tax code condition table and maintain the percentage rate for your tax code.
    Same like for the rest of the condition type as per the respective percentage.

  • How to create New TaX Code

    Dear Expert,
    I am new in SAP so can U plz tell me each steps how to create a new tax code, i have gone through sdn forum but this is not sufficient
    my co. requirement is
    BED 10%, Cess 2%, HS E Cess 1%, VAT_D 3% (Input).
    Kindly tell me every step I will gv U full points.
    Thanks in Advance

    Hi Expert,
    As mentioned above, Go to T-Code: OBYZ,
    Firstly select the Conditions, here should define the condition types for the Tax Procedure.
    Secondly we have a Access Sequence, were we use pre-defined.
    Thirdly we have to create a Tax Procedure, here we need to assign the created condition types and Account Type.
    Where Account Types are used to trigger the GL Accounts, we assign GL Accounts in T-Code: OB40 with respect to Account Types.
    In T-Code: FTXP, We create a Tax Code and this Tax Code in used in T-Code: FV11, Her we maintain the percentage with respect to the Combination and Tax Code, this combination are pre-defined(i.e., Access Sequence)
    and Configure complete CIN Settings from the below link:
    Maintain CIN Master Data in T-Code: J1ID and for India Localization Menu in T-Code: J1ILN

  • New Tax code in TAXINJ

    Hello Guru's
    I have one requirement of New tax code
    2.5 % Services Tax ( Cenvat)
    2 % Ecess on service Tax
    1 % H cess  on service Tax
    5% Vat on all above
    kindly let me know the condition types for creations.

    Which Pricing procedure you are using ?
    Let say TAXINJ then go to t code FTXP- Enter input as country key IN> Tax code > tax type input or out put>Enter the % against relevent condition type say >JSEP for service tax 5.3% JSEI Educ ess 2% > JSEP 1% JVRD Vat % then save
    If you are using TAXINN procedure then leave all the condition blank just create tax code then go to FV11 to maintain these condition which will fetches record in PO. Hope this is clear

  • VK12 - disappered %? how to transport the table with new tax codes?

    I'm changing conditions for tax codes in VK12. I have 2 questions:
    1. When I created new entries, the % sign disappears. What shoud I do with this?
    2. Should I create a transport with this changes? Or should I create all new entries with new tax codes manually in all target systems?
    Thanks for all help,

    normally tax code changes will be done in PRD directly.
    no need to transport
    in VK12, that is change condtion record, you will find the details of condition record right.
    then why are you going to create again.
    change what ever you want to change then and there only and proceed with your requriment.

  • Create New Tax code and condition types

    hi experts,
    i want to create new tax code V10 and new condition types ZWKT and ZSTX under V10.
    i have a requirement that is create service general Purchase Order with following tax conditions
    1. Work Tax 4% on 70% of Bill Amount.
    2. Service Tax 12.36% on 33% of Bill Amount.
    while creating PO when user select ZWKT and ZSTX, system should calculate 4%( on 70%) and 12.36% (on 33%) and place the tax amount on relevant fields automatically.
    ( i tryed with tcode:FTXP and created tax code(country key: IN, procedure: TAXINN and taxtype: V input tax) but problem with assigning condition types and calculation procedure)
    please help me in this issue (step by step).

    Here you have to create two dummy condition type for Base Value. One for Service Tax and other one for Work Tax.
    Then create two condition type for Work Tax & Service Tax.
    Ex : Work Order Base Value condition type is "A"
    Service Tax Base Value condition Type is "B"
    Work Order Tax condition Type is "C"
    Service Tax condition type is "D"
    In Pricing procedure just add all the above condition type as below
    Both Base Value condition type will be calculated from System Base Value  & in FV11 maintain the Base Value percentage against the Tax Code & Condition Type as per ur req (70% for Work Tax & 33% for Ser Tax)
    Work Order Tax & Ser Tax will be calculated from respective Base Value. In FV11 just maintain the tax %.

Maybe you are looking for