Use of Scale Type D

Hello Gurus,
I wanted to use scale type D for one of my scenario
The details are given below
I want to divide the share of revenue betwen my client and his JV partner.
I created a condition type ZBAS - for basic rate * quantity. This condition type is statistical
this total amount will be distributed between client and his JV partner
For claint share I have condition type ZCI1 -60%
For JV Partner Share I have condition type ZCI2 - 40%
My Scenarios is when my rate is 10,000
then ZCI1 - 60%
ZCI2 -40%
When Rate is 15,000
ThenZCI
upto 10,000 - 60%
from 10,000 -15000 - 55%
ZCI2
upto 10,000 - 40%
from 10,000 -15000 - 45%
I tried to use the scale type but I am not getting correct values. System is not determining the 60% for value upto 10,000
Appreciate your inputs
Thanks
Narayan

HI
check the below links
[Re: Scale type D|Scale type D for group conditions;
[Re: Pricing scales|Pricing scales;
Regards,
Prasanna

Similar Messages

Scale Type of DAQ virtual channels configured using MAX

I configured some analogue input and output channels using Measurement & Automation Explorer, under Data Neighborhood. One of the attributes I could change is called "Scale Type". I'm wondering what it's for, or where I can find information about it. Thanks

Amyz,
The most helpful document I found was the DAQ Channel Wizard Tutorial: http://www.ni.com/support/labview/toolkits/chanwiz/. Step 7 of analog input or output briefly describe the scale modes. Good luck with your application.

Scale Types in condition types customization?

Dear ALL,
In spro in "define condition types" in MM we have to assign the type of Scale whether FROM ,TO, NOT USED, INTERVAL etc.. to PBDD, AMO2 etc. Between Scale types i.e. FROM (BASE) Scale and TO Scale what are the differences? What is the concept behind these types of scales?
Thanks

From to TO Scale means
If your price with vendor is like , If you buy
up to 1000 quantity you get at $ 1.00 a PC
> 1000 you get at $ 0.95
> 2000 you get at $0.85 like wise you can define the scale...while PO creation based on the quantity system will pull the price.
Rewards the points for helpful answer

Scale type or objects not working

Using the shift key to constrain proportions on type or objects doen't seem to work for me. I'm using version 13.0.2. It doesn't work using the scale tool or by dragging endpoints. Am I missing something here?
Michael

Hi,
It's not the "trim" that implies "not null", but rather the fact that:
- "not like" operator works only on non-null values and
- "not like" operator disregards null values.
Consider this:
test@ORA92>
test@ORA92>
test@ORA92> l
1 with x as (
2 select null as y from dual union all
3 select 'a9999' from dual union all
4 select 'bxx' from dual
5 )
6 select * from x
7* where y not like '%9999'
test@ORA92>
test@ORA92> /
Y
bxx
1 row selected.
test@ORA92>
test@ORA92>Here, trim function was not used, but still the first row (that had null for y) was not returned. That's because Oracle disregarded the first row for comparison and out of the next two rows, it returned the third row because it satisfied the condition.
As for your query, do the following conditions hold true:
1. if status_code is null - show the row regardless of order_type
2. if status_code <> 'T' - show the row regardless of order_type
3. if status_code in (a,b,c,d) and order_type is not null and order_type ends with something other than 9999 - show the row
4. if status_code in (a,b,c,d) and order_type is null - do not show the row
5. if status_code in (a,b,c,d) and order_type is not null and it ends with 9999 - do not show the row
6. if status_code is anything other than (a,b,c,d) - do not show the rowpratz

Regarding Scale Type

Hi ,
i am working on Pricing condition types. i have doubt in scale types.
In scale type drop down Option " D " is there
Graduated-to interval Scale .
can anybody explain what is the use of this scale type and in what kind situations i can use this . please help me to work out on this .
Thanks ,
srikanth .

Hello Srikanth,
The following post will clarfy you question:
Query: Scale type D (pricing)
Thanks,
Jignesh Mehta

Scale type in condition type

Hi,
What is the importance of scale type in condition type.Actuly I want to know that how we use scale type in condition record.Please explain this with example.
Regards
Prabudh

Hi,
can u do a small search in this forum, todad morning also there was one posting regarding the same.
Scales
A scale in a condition record where prices, discounts, or surcharges are defined for different customer order quantities or values.
This scale is used by the system to determine the price, discount, or surcharge for a given quantity or value.
This is defined in the each condition type
spro--> img>sd->basic functions> pricing>pricing control->define cond type--->select any one condtion type eg: PR00--> come down u will find scales views.
scales basis:
depending upon the scales basis the prices are determined according.
example:
A company want to give discount based quantity scale ie, if customer buy 10 pcs the prices would be 100/ unit & if he purchase more than 20 the prices would be 80/unit.
So in scale basis u have to select quantity scale. & the prices aganist teh qunatity will be defined in condition record maintanenace (tcode:VK11). The other sclaes basis available are
B Value scale
C Quantity scale
D Gross weight scale
E Net weight scale
F Volume scale
G Scale based on a formula
L Point scale
M Time period scale - Month
N Time period scale - Years
O Time period scale - Days
P Time period scale - Week
R Distance
S Number of shipping units
T reserved (IS-OIL, time prices
X reserved (IS-OIL, day prices)
scale formula:
here there small routine is predefined to determined of scales
hope this helps u
regards,
Arun prasad

Scale type D for group conditions

Hi all,
I am creating a new group condition and am trying to make it scale type D - graduated-to-interval scale. However because this is a group condition, SAP is giving me an error (Scale type 'D' cannot be used for group condition 'X').
What is the best solution to this?
I would like to give discounts based on:
Sales quantity:
1-100 = 15% off
101-200 = 25%
201-300 = 35%
301-400 = 45%

Hello
This is b'coz your condition type with active Group condition Indicator. That means, here the system calculates the basis for the scale value from more than one item in the document.
So, the scale D maintain in Scale basis for those condition type, does not go with it and throws an Error.
Thus, if you want to scale functionality for condition type with group condition indicators use GrpCond.routine to maintain routine.
Routine number for creating group key identifies a routine that calculates the basis for the scale value when a group condition occurs in pricing.
For instance.
Check routine 3-Mat.Pricing Group. This is an example of a structure of group key formula. A structure of group key formula can be used to influence the basis the system uses when reading the scale of a group condition. The formula is assigned to a group condition type in customizing.
Formula '3' adds up the quantities / values of all of the line items in the sales document that have the same material pricing group (field KONDM) as the current sales document line item.
A company defines a particular discount (condition type Z001) with scales based on weight. When a sales order line item is priced that is eligible for the Z001 discount, the user would like the system to read the scale with not just the weight of the current line item, but the combined weight of all items in the sales document that have the same material pricing group as the current line item. To accomplish this, the user defines condition type Z001 as a group condition and assigns structure of group key formula '3' to it in customizing.
I hope this assist you.
Thanks & Regards
JP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

To Use Cursor or TYPE table Index by PLS_integer

Hi All,
Let's see if I have table with no. of records 19,26,20,000.
If I want to loop through all the records which will be a optimized way To Use Cursor or TYPE table Index by PLS_integer.
Please guide.
Thanks.

What is it you want to do to/with the rows you're looping through?
Ideally you want to avoid looping, as that's row by row (aka slow by slow) processing and it's expensive time-wise.
If you're doing DML (insert/update/delete) then you're best off doing it in one sql statement, rather than looping.

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

How do automate using two output types in an invoice based on plant

Hello,
Can you tell me how to configure automatically two output types for the same invoice.
My client has business in USA and Europe.We are using only one sales organization. But we need to print invoices in letter size and A4 size depending on whether the invoice is created in europe or in USA. So , I have created two output types, one for letter size and one for A4 size. How do I configure so that if it is based in a plant/shipping point in Europe it is printed using the A4 output type else in letter size. Please suggest.
SAPSDUSER

I do not think you can use plant/shipping point in your access sequence for invoice output on header level, unless you add these fields to header level kommunication structure and populate these fields in userexit.
You can either
1. define requirement routines for your 2 output types which are mutually exclusive (if plant = A routine 1 returns sy-subrc = 0, routine 2 returns sy-subrc <>0, if plant = B routine 1 returns sy-subrc <>0, routine 2 returns sy-subrc = 0). You can assign requirements to output type either in output determination procedure OR in the access sequence. I would do it in output determination procedure. Check transactions NACO or NACE.
OR
2. add your fields to komkbv3 communication structure, populate your fields in thsi structure in userexits which are called from the function module komkbv3_fill and then you can either use then in the access sequence for your output types or create routines as in case 1. but the logic will be a simple check statement since KOMKBV3 is available in these routines.
3. In fact you can use one output type and select your layout in the print program itself... which may be even easier for you. We use this approach to select proper layout for GEOs which may have several layouts depending on region for example... so the output type is defined per country, then layout is selected by print program. (tnapr-fonam = ..., nast-spras = proper language, set country '' to use proper decimal & date format...)
Message was edited by:
Siarhei Mahulenka

Can i use technical system type 'third party' for r3 system in idoc2file sc

Hi,
i am doing a sample out bound scenario (idoc 2 file), distributing idoc from sap system to csv file (in same network). in this can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
can any one suggest me,........ Thanks in advance & would be appreciated.
Regards
Rajesh

Hi,
 can i use thchnical system type 'third party' for R3 system. will the scenario work properly or not.
--- No u can't use this...Ur technical system must be "WebAS ABAP" only. For file system you use 3rd party system. means ur technical system like follows.
sender
R/3 -- WebAs ABAP
Receiver
File - 3 rd pary system
And some times some of the business systems in SLD are not visible in ID, when assigning business system in ID.can any one tell reason for this.
Click "Clear SLD cache" repeatly for some time in ID, it will come.
regards,
Ansar.

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

How to use oracle collection type with JDBC?

I try to use oracle collection type in java program. So I made some package and java program, however Java program was not found "package.collectiontype"(JDBC_ERP_IF_TEST.NUM_ARRAY) . please, show me how to use this.
Java Version : Java 1.4
JDBC Driver : Oracle Oci Driver
DB: Oracle 9i
No 1. Package
===========================================
create or replace package JDBC_ERP_IF_TEST AS
type NUM_ARRAY is table of number;
procedure JDBC_ERP_IF_ARRAY_TEST(P_NUM_ARRAY IN NUM_ARRAY, ERR_NO OUT NUMBER, ERR_TEXT OUT VARCHAR2);
procedure TEST(ABC IN NUMBER);
END JDBC_ERP_IF_TEST;
==================================================
No 2. Package Body
===============================================
CREATE OR REPLACE package BODY JDBC_ERP_IF_TEST is
procedure JDBC_ERP_IF_ARRAY_TEST(p_num_array IN NUM_ARRAY,
ERR_NO OUT NUMBER,
ERR_TEXT OUT VARCHAR2) is
begin
ERR_NO := 0;
ERR_TEXT := '';
dbms_output.enable;
for i in 1 .. p_num_array.count() loop
dbms_output.put_line(p_num_array(i));
insert into emp (empno) values (p_num_array(i));
commit;
end loop;
EXCEPTION
WHEN OTHERS THEN
ERR_NO := SQLCODE;
ERR_TEXT := ERR_TEXT ||
' IN JDBC INTERFACE TEST FOR ORACLE ERP OPEN API..';
ROLLBACK;
RETURN;
end JDBC_ERP_IF_ARRAY_TEST;
procedure TEST(ABC IN NUMBER) IS
begin
insert into emp(empno) values (ABC);
commit;
end TEST;
end JDBC_ERP_IF_TEST;
===============================================
NO 3. Java Program
===============================================
ArrayDescriptor descriptor = ArrayDescriptor.createDescriptor("JDBC_ERP_IF_TEST.NUM_ARRAY", getConnection());
ARRAY array = new ARRAY(descriptor, getConnection(), arrs);
cstmt = getConnection().prepareCall(LQueryFactory.getInstance().get("Meta/Basic/testJdbcErpArrayIf").getSql());
cstmt.setArray(1, array);
cstmt.registerOutParameter(2, Types.INTEGER);
cstmt.registerOutParameter(3, Types.VARCHAR);
====================================================
couldn't find this phase => JDBC_ERP_IF_TEST.NUM_ARRAY
what can i do for this package and program? please help me..

Something like this:
create or replace type t_record as object (
id number,
no number
CREATE or replace type t_table AS TABLE OF t_record;
set serveroutput on
declare
v_table t_table := t_table();
v_t1 t_table := t_table();
begin
v_table.extend(1);
v_table(1).ID := 1;
v_table(1).No := 10;
v_table.extend(1);
v_table(2).ID := 2;
v_table(2).ID := 20;
SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
from TableA
FROM TABLEA
WHERE ID IN (select t.ID from table(v_Table) t);
for i in 1..v_t1.count loop
dbms_output.put_line(v_t1(i).ID);
dbms_output.put_line(v_t1(i).No);
end loop;
end;
/Untested!
P;
Edited by: bluefrog on Mar 5, 2010 5:08 PM

Using Multiple Object Types in a FIM Managed Criteria Distribution Group

Is it possible to use multiple object types in a criteria based distribution group. So when building your criteria filter, "Select (object type) that match (all/any) of the following condiftions". Currently you can only choose 1 object type and
I want to be able to choose object type "user" and a custom object type I create for my contacts

You can create main condition as "any" and later add two sub-conditions - one that object in set "All People" and other sub-condition that object in set "All Contacts" or "All Groups".
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Use of Scale Type D

Similar Messages

Maybe you are looking for