Useful life is asking mandatory field in asset master data

while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
i want base method instead of 0011?
which base method i have to give? please give suggestion?
Thanks
indu

Hi ,
i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
Note: if we mention base method 0011, we must give passitive values in useful life.
what i have to do? please tell me?

Similar Messages

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • How to make Location as mandatory field  in Asset Master

    Hi All,
    My client wants Location field to be mandatory in the Asset master. I ddefined it in
    Enterprise Structure>Definition>Logistic-general > Define Location.
    Also i made this field mandatory in 'Define Screen Layout for Asset Master Data'>Time-dependent data...in configuration.
    But when i go to create New Asset and when i select Location which i defined earlier , i am getting this error " Entry -
    does not exist in T499S (check entry)
    Though i have defined this location in Ent. Struct.
    Need your help
    Regards,
    PM

    Hi Pyare
    I think note 109602 could be relevant to this problem. 
    Perhaps you attempt to enter a location without first entering a a
    plant. (A location will not be accepted unless you have first
    specified the plant.)
    Regards
    Javier

  • Field in asset Master data "Planned retirement on / control

    Hi all,
    I would like to know how to deactivate the control for the field "Planned retirement on"?
    The control is the following "Simulate only to planned retirement" indicator in the selection screen of the given standard report.
    Where can I found this indicator?
    Thanks for your help!
    Cheers,
    Karim

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • MM Manage mandatory field in material master data

    Hi,
    i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
    I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
    Thanks for help,
    Michele Garofalo

    Hi,
    I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
    please provide me solution for this one
    Cheers...

  • Best practice for "Quantity" field in Asset Master

    Hi
    I want to know what is the best practice for "Quantity field" in asset master. It should be made displayed only or required field in Asset Master creation.
    Initially I made this field as required entry. So user entered 1 quantity. At the time of posting F-90, he again entered quantity. So my quantity in asset master got increased. Hence i decided to make that field display only in asset master creation.
    Now i made that field as display only in asset master creation. At the time of posting F-90, that quantity field is not coming only. I check my field status group for posting key as well as GL account. Its optional field. Inspite of that user is able to make entry in F-90. Now quantity field is '0' only in asset master even though there is some value in asset.
    Please help what is the best practice wrt quantity field. Should be open in asset master or it should be display only.

    Hi:
               SAP Standard does not recommend you to update quantity field in asset master data.  Just leave the Qty Field Blank , just mention the Unit of Measure as EA. While you post acquisition through F-90 or MIGO this field will get updated in Asset master data automatically. Hope this will help you.
    Regards

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • Addition of field in asset master record

    Dear All:
                  I want add a field IN HOUSE PRODUCTION in asset master data creation, Moreover i want to add a field of Iniatiator in Asset master data. Please guide where should i go in SPRO. Waiting for your reply.
    Regards
                  Atif

    You can use for this the User Fields in the asset masterdata
    Financial Accounting / Asset Accounting / Master Data / User Fields
        Define 4-Character Evaluation Groups
        Define 8-Character Evaluation Groups
        Change Key Words in the Evaluation Groups
        Develop Enhancement for User Fields in Asset Master Record

  • How to validate a field in Asset master?

    Hi,
    I have requirement like need to validate field ANLA-TYPBZ,
    Data uniquely passing to this field, i need to check whether data already exist or not while creating asset master using AS01 transaction.
    eg: suppose ANLA-TYPBZ = 12345' entry is there in the table, if i tried to post the data using AS01 as '12345', it should give error message.
    Thanks.

    hi,
    Follow the below steps:
    1. create a validation in GGB0 at node Assets - > Master Data
    2. create a routine in program where these validations were written. It is a copy from RGGBR000
    3. activate validation: append a record in transaction OACV
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Validations
    Regards
    Alok
    Edited by: alpatr on Nov 21, 2011 8:12 AM

  • Add field group to Asset Master Data Screen Layout

    Hi Gurus !!
    Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
    Thanks a lot,
    Sasha

    I don't think you can add a funds center to the Time dependent tab.
    Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

  • Displaying Evaluation groups field in the asset master data

    Dears,
    The Evaluation group fields in the allocation tab in the asset master data was not displayed in the layout, is there is any harm of displaying it in the production system after 3 years from Go-live.
    i think it should not make any harm, i just want to confirm.
    Regards,
    Ahmed Samir

    Salam Ahmed
    There is no harm.. These fields are used for reportng. They dont impact the process in any way
    Br, Ajay M

  • Enabling of the Business Area field in Asset Master Record

    Hello SAP Gurus,
    Can you explain how I can enable Business Area field in Asset Master Record becz it needs be change.How I can acheive this becz it is coming in disabled mode.

    Once u ticked the check box save it.Now u can change these field in main asset master record and if u have ticked Su no also then in sub asset master record also.Make sure filed status is optional.
    Now u go to AS02 if u want to change the filed for main asset or sub asset
    Please assign points

  • Adding Investment Order Field in Asset Master

    Hi,
    I went to the following path:
    Spro --> Financial Accounting --> Asset Accounting -->Master data --> Define Screen layout for master data
    In all the logical field groups, I cannot find field 08 - Investment Order which I want to set to optional.
    Anybody knows how I can add the field?
    All the fields 01 - 07 and 09 to 19 are in the list.  I wonder why 08 is missing. 
    Do I need to activate it somehow?
    Thanks.

    Hi Newbird,
    Note: You are no longer NEWBIRD, since from 2006 you are here....:)
    To have Investment Order field in Asset master, first you need to activate it thru below path.
    IMG->FA->AA-> Integration with GL->Additional Account Assignment Objects->Activate Accoount Assignment Object...
    Here you need to activate INVESTMENT ORDER field to enable the inputs in asset master. Without doing this you will not be able to find the field in the screen layout definition for asset master data.
    Regards,
    Srinu

Maybe you are looking for

  • Authority to save photos in Photoshop

    All of a sudden, in Photoshop, I can't save photos to certain places.  I get the message that I don't have that authority, and I should contact the administrator for permission.  How to I correct this?  It is new since I installed a new printer and a

  • Using javascript to detect JVM

    Hi all. I'm trying to use javascript to detect whether the JVM (either j2sdk or j2ee) has been installed and take the user to SUN web page if not. The original MS JVM is not useable for my purposes (does anyone use it?). I know how to detect browsers

  • RTTI vs Compiler Type Identification (Casting?)

    Given: Class Super and two subclasses of Super, SubOne and SubTwo. Super has one method, doBeDooBeDoo() SubOne has one method, doThis() SubTwo has one method, doThat() Super a = null; if(foo) {     a = new SubOne();     a.doThis(); } else if(bar) {  

  • Library Buttons and HTTP Link

    Using Flash (CS4 Pro) I used one of the predefined buttons (tube blue) from the buttons.fla from the common libraries folder. Image is on the stage and I see the up,over,down,hit states. I want to add a link to go to another web page but when I selec

  • Exclude some employees in  tcode PC00_M40_CALC in hr module

    He Friends We want to exclude salary processing (  PC00_M40_CALC )  of  some  employees  based on some conditions  . Please suggest  any use exit or  any other way to achive the same. Regards S.Sharma,