User cannot connect to backend system with user J2EE_ADMIN.

I am using Rapid Installer to initiate the second part of the installtion "ERP 6.0 EhP 3 Self-Service Scenarios and Automatic Roles". When I get to the J2EE User section to enter the parameters, the user is defaulted to "Administrator" and I enter my password. I click next and get this message "User cannot connect to backend system with user J2EE_ADMIN." Any ideas?

If this is a double stack installation, you need to enter J2EE_ADMIN as user, NOT administrator.
Markus

Similar Messages

ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

Dear All,
When I try to deploy WD application, it gives me this following error and doesn't deploy.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
     at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
     at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
     ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
     at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
     ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
Try this
1. Is this is the remote server?
   if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
    format   : <server ip> <servername>
    restart NWDS
2.If not then put the Ip address instead of name inside Window--preference --Sap server Check.
3. Put some different UserId and Password who has deployment rights
Best Regards
Satish Kumar

Connecting to backend system with parameters

Hi,
i am able to get connected to bakend system with sytem number, portno, sid, host or ip... and can get transcation ivews with that...
ex: i am able to see perticular SAP R3 Transactional iview with these parameters
Then what is the purpose of creating RFC destinations, go.bat configuration, certificate creation and all those things.....
Thanks
Kumar.

Hi Kumar,
This things are needed when you want to access any service from R3 to Portal or vice versa. Like <b>Adobe Document Service (ADS)...</b>It should be installed in Portal server..and if you want to use ADS for displaying/printing R3 form in pdf format then you need to access ADS from Portal. For this type of case you need only the creation of RFC destination, go.bat configuration for HTTP destination, certificate..etc..
Thanks,
Sekhar

ERROR: Cannot connect to Host: [SERVER] with user name: [J2EE_ADMIN]

Hello SAP experts
I have started to deploy java SPS on a solution manager system, but has encountered some problems.
I've tried both JSPM and SDM, but get the following error:
Software Component 'ADSSAP'/ 'sap.com'/ 'SAP AG' / '1000 .7.00.16.0.20080610114809''/ '1 ':
Caught exception mens checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Can not connect to Host: [SERVER.domain] with user name: [J2EE_ADMIN]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception vid getInitialContext surgery. No server is running. [Root exception is com.sap.engine.services.
I can not log on Visual admin, with user J2EE_ADMIN, I've checked the user is not locked in the ABAP stack. I have activated SAP * on the JAVA stack, but still can not log on, get this error:
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Can not create new remote login context.
I've run out of ideas, please some suggestions.

SOLVED - Note 609603

Connect to a backend system with the BI connector via Visual Composer

Hi all,
I set up a system landscape on my notebook with the NW2004s ABAP as NSP and with the NW2004s JAVA SP7 as J2E. Both systems are integrated in the SLD, this is set up. Furthermore I installed a BI system alias as NSP_XMLA in the portal with the URL for the backend system: http://localhost:8000/sap/bw/xml/soap/xmla.
I have the same user on portal and backend system NSP. Both have admin previleges.
When I try to logon to the backend system with this URL I get this error:
"No switch to HTTPS occurred, so it is not secure to send a password"
" Choose "Logon" to continue A dialog box appears in which you can enter your user and password"
Then I can logon to the server and get a lot of XML.
But I have to manually logon to the system.
From the portal I cannot logon to the backend system with the test function. I get the error:
Alias is found, but connection failed.
I guess there must be an automatic logon preconfigured.
How can I do this?
Is SSO necessary?
thanks for any help

Hi Gregor,
thanks for your answer, which was intersting but could not solve the problem. In the meantime I discoverd the reason for it.
You have to insert the connection URL to the BW system at 2 points in the system.
1. You have to configure the XMLA connector with the Visual Administrator.
2. You must implement a system in the portal where you configure all necessary information, also the URL to the BW system.
This seems somewhat strange to me because you will then not be able to connect with two or more BW systems to the portal and VC what is centainly necessary in a real world scenario. Anyway I can now see all Infoproviders of the BW system in the VC, and SSO isn't necessary because you configure the information to login to the BW system directly in the configuration of the XMLA connector in Visual Administrator.

Sharing only users cannot connect to Lion Server

Dear all,
I stumbled across a funny problem, that I tried to resolve all day. I just wanted to add a sharing only user for my girlfriends new MacBook that she could use to connect to a shared Time Machine Volume.
If I add a new standard user, this user can connect to my server via finder (connect as...) and see the shared drives. If the same user tries to connect to the Time Machine Backup Volume via the settings dialog, it receives an error message (OSStatus-error 5).
If I add a sharing only user, this user cannot connect via finder or Time Machine (same error). The clients console states the following error message:
/System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent[2471] AFP error -5018 mapped to EIO
Does anybody have an Idea?

That is my point. Yes, Apple still lets you add users via users and groups in system preferences but that is not how you should be adding users. I've seen nothing but trouble when that option is used to add users and I believe that the Lion server docs say to not use that. If you are using lion server why not use it the way it was meant to be. Just create a account in OD and only give her access to the Time Machine Service and none of the others.

Users cannot connect over SMB 10.10.1 server.app 4.0 and 4.0.3

Hello,
I have an issue where users cannot connect to a server for files sharing over SMB.
Info:
All users on 10.10.1
2 Servers on 10.10.1
Server.app 4.0.3 but issue was also present using 4.0
SMB connection works when connecting to the OD Master
SMB does not work when connecting to the OD Replica ServerBut AFP works fine when connecting to the OD Replica Server.
I have destroyed and re-added the OD replica but that did not seem to help
This is what I see in the logs each time I try to connect(logs have been cleaned to remove client details:
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: label: default
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: dbname: od:/Local/Default
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: mkey_file: /var/db/krb5kdc/m-key
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: acl_file: /var/db/krb5kdc/kadmind.acl
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: digest-request: netr probe 0
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:12 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:13 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:13 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:13 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:13 server.pretendco.com kdc[4802]: Got a canonicalize request for a LKDC realm from local-ipc
Jan 9 14:37:13 server.pretendco.com kdc[4802]: Asked for LKDC, but there is none
Jan 9 14:37:13 server.pretendco.com sandboxd[395] ([4802]): kdc(4802) deny file-read-data /private/etc/krb5.conf
Jan 9 14:37:22 server.pretendco.com kdc[4802]: Got a canonicalize request for a LKDC realm from local-ipc
Jan 9 14:37:22 server.pretendco.com kdc[4802]: Asked for LKDC, but there is none
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: od failed with 2 proto=ntlmv2
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: user=SERVER2\\username
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: kdc failed with 36150275 proto=unknown
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: guest failed with -1561745590 proto=ntlmv2
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init request
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: init return domain: SERVER2 server: SERVER2 indomain was: <NULL>
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: uid=0
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: od failed with 2 proto=ntlmv2
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: user=SERVER2\\codywood
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: kdc failed with 36150275 proto=unknown
Jan 9 14:37:23 server.pretendco.com digest-service[9961]: digest-request: guest failed with -1561745590 proto=ntlmv2
I suspect the problem is to do with Kerberos and in relation to this server being an OD Replica.
I would really appreciate anyone's insight into this.
Thanks
Morgs

I have the same problem although I upgraded from Lion Server to Mountain Lion Server. The error appears to go hand in hand with this error.
userInit: CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Network/Servers/fullyqualifieddomainname/Users/user is unavailable. User domains will be volatile.
I've read a number of things to try. A lot of people point to DNS being a problem, but I'm confident this is correct in my environment.

One user cannot connect to safari.

Good morning. We have developed a strange new problem lately that I cannot solve. On our Mac mini running 10.5 we have one user setup for our kids, and one administrator. As of yesterday the kids' account cannot connect to the internet with Safari or Firefox, however, the administrator can. I have tried all the usual routines, trashing cashes/prefs, repairing permissions, etc. I tried this morning creating a guest account to see what happens, and the guest account can also connect to the internet with no problems!
The only thing that changed lately is my Mac Pro asked me to upgrade the airport utility and firmware, so I did.
Any ideas? This is very frustrating and confusing.
Thanks
Josh

josh bosse wrote:
the kids' account cannot connect to the internet with Safari or Firefox
What type of account are they using, managed, standard, or administrator? If they are using a managed account, how are the parental controls set?

Wireless user cannot connect to AP

Hi,
I have an issue which only 1 user cannot join the SSID but others user working fine, i had capture the log at Cisco WLC 5508 and found the error as below, anyone can please help on what is the error about?
apfMsConnTask_4: Oct 09 13:53:51.180: #APF-4-ASSOCREQ_PROC_FAILED: apf_80211.c:3838 Failed to process an association request from MAC Address. WLAN:3, SSID:XXXXXX. message recived from disabled WLAN
Thanks
Gilbert

Error Message    %APF-4-ASSOCREQ_PROC_FAILED: Failed to process an association request
from[hex]:[hex]:[hex]:[hex]:[hex]:[hex]. WLAN:[dec], SSID:[chars]. [chars].
Explanation    Processing of association request from a mobile failed. The real reason for failure is specified in the message.
Recommended Action    If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ . If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create/launch.do, or contact your Cisco technical support representative and provide the representative with the information you have gathered.

INS0009: Unable to connect to the database with user SYS

Hi all,
I'm trying to create an OWB repository with OWB repository assistant (10.2.0.2.) on a 10.2.0.1. database (windows XP platform). I get the following error every time I fill in the connect info for the SYS user:
INS0009: Unable to connect to the database with user SYS. java.sql.SQLException: ORA-01017: invalid username/password; logon denied
I can connect to the database (sqlplus sys/<password>@orcl as sysdba) and the OS user is in the ora_dba group. Also checked the database parameters remote_login_passwordfile (= EXCLUSIVE) and O7_DICTIONARY_ACCESSIBILITY=TRUE.
Does anyone know what the problem is? Any help is appreciated.
Regards,
Quinten

Ok I found the problem myself, I used the wrong sys password :-(. I thought the password I used to logon in sqlplus was right (sqlplus sys/<password>@orcl as sysdba) but the password doesn't matter when you logon as sysdba! So I altered the password for the user sys and now I can continue the steps of the repository assistant.
Quinten

Failure to connect to backend system in Portal

Hi Experts,
I was hoping someone could help, quickly!!
We are having an issue with transporting our VC model. We are on VC 7.0 SP17
I created a model in our development environment using a variable input form and adding the value help feature. After we deploy in our dev environment the model looks perfect!!!
We transported the VC model as an iview through the portal and we get a Failure to connect to back end system error. We ruled out that it is not a transport problem using the portal.
Can someone help!!
Thanks so much, Anna

Hi Again,
Thanks for both of your response, however, there is nothing in the log files andt we still have the Application error message, failure to connect to backend system.
We were able to bypass the error and the model starts to "semi-function" - but we cannot access the characteristic through value help, we just get empty drop downs. We all have the proper authorization in BI....
Do you think there is a permission problem in the back end portal?
Hopefully you can help.
Thanks so much, Anna

BBPGETVD throwing an error -Backend system with release 701 are not support

Experts,
After changing the Backend connection from R3 4.6c to ECC6 sysem in our BBPCRM4.0,
the transaction "BBPGETVD" is not working, which is throwing an error as
"Backend system with release 701 are not supported".
Already we have applied some of the notes (822883 &862290)
Thanks
Ahamed

Are you able to replicate other data like plants, product categories from the same backend system or are you facing the same error?
Also please check the logical system and see if they are assigned to the client correctly. (in SPRO settings)
Thanks,
Prashanth

Backend System with Release 701 are not supported

SRM 5.0
Extended Classic Scenario
CCM 2.0
When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
Backend System with Release 701 are not supported
Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
Can any one advice.
Regards,
Jayoti
Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Could not connect to backend system through portal via Web Dispatcher

Web dispatcher redirecting problem
Dear Experts,
I have implemented a scenario which comprised of customizing that is developed in Portal EP7. What customizing does is getting report from backend system (ERP 6.0)
According to the needs for reaching the portal from internet I configured the SAP Web Dispatcher in the environment as you may see its contents below.
The problem is when I run the customizing in portal system then it requires connecting to backend system (ECC 6.0) to get the data (report). But from this point on web browser comes to a blank page, could not view the data that is from backend system via portal. Because in the time when it tries to retrieve data in backend system, on the left bottom of the explorer the indicator shows internet address that system uses connecting to the backend system as local network address of the backend system which is not known in internet therefore I get blank page.
The question is how to configure the web dispatcher in a way that both portal and backend systems could be reachable from internet?
Contents of profile file of Web Dispatcher as;
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = portald
SAPSYSTEM = 02
INSTANCE_NAME = W02
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = portald
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=60000
icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
icm/HTTP/redirect_0 = PORT=50000
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
Regards,
Ali Taner

Hi,
To resovle this you must have registered FQDN for your backend system as well. When you call the report from Portal using internet it should call that FQDN of your backend system then DNS will resolve this & you will get the expected page. This way only you can resolve this issue.
Thanks,
Sachin Sable

User cannot connect to backend system with user J2EE_ADMIN.

Similar Messages

Maybe you are looking for