User Defined Characteristics not populating for Batch during GR of SC PO
We have a requirement to populate the one characteristic ( Country of origin ) of batch during GR.
After GR the characteristics value should be displayed in Classification Tab of MSC3N transaction.
So that I have implemented the Enhancement MBCFC004 .
Two conditions here for Populating the Country of Origin
1) During GR of Standard Purchase Order the Characteristics (Country of Origin) value should be mseg-oic_oland1 ( Country from Extenal Details )
For this condition the User Exit code is working perfectly and also updating classification in MSC3N .
NO ISSUE for Standard Purchase Order.
2) During GR of Subcontract Purchase Order the Characteristics (Country of origin value ) should be populated from the characteristics value of Batch of
component Material .
For this condition the User Exit Code is working perfectly , But NOT updating classifcation in MSC3N .
This happens for Subcontract PO.
Can anyone suggest solution , why this happening for Subcontract Purchase Order.
Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat
Similar Messages
-
User defined function in java for message mapping
I wrote the following user defined function in java for message mapping and mapped vendor with this. The aim of this function is to write a error file at defined path when i send empty Vendor value from File to RFC-Function module BAPI_PO_CREATE. The "err.txt" error file is not written when i execute in TEST but the value "ERROR" is returned to destination Vendor Field.
public String validation(String a, Container container) {
//write your code here
if (a.equals("")) {
try {
String source = "Vendor cannot be empty";
char buffer[] = new char[source.length()];
source.getChars(0, source.length(), buffer, 0);
for (int i = 0; i < buffer.length; i +=2)
f0.write(buffer<i>);
f0.close();
FileWriter f1 = new FileWriter("/10.10.0.55/sapmnt/trans/edixiin/err.txt");
f1.write(buffer);
f1.close();
catch (IOException e) {}
return "ERROR";Hi Senthil,
Check these things :
1) Whether you have permission to create a file in that directory.
2) try giving this
10.10.0.55
sapmnt
trans
edixiin
err.txt
3) Also check for permissions.
Hope this will help you.
Regards
Suraj -
How can I set user-defined characteristics's range in pa cycle's receiver?
I created user-defined characteristics in PA which have no check validation.
When I create PA assessment cycle, I want to set it's range in cycle's receivers side.
User-defined characteristics in PA which have no check validation don't have range selection function in cycle's receivers side.
How can I set it's range in cycle's receivers side ?Hi,
You can do the same by creating SETS. You can create the same from header menu at the time of entering receivers during creation of assessment cycles.
Regards
Hemant -
COPA User Defined Characteristics
Hi Friends,
I need to add a user defined characteristic in COPA for Internal Order Types
Can any body guide me please if you have any guide with screen shots, I think i need to add characteristics with user defined WW>then add in Operating Concern>add condition types and then in KEDR table look up AUFK and selection to VIAUFKST.
Can any confirm the above or guide it in the right manner if any config book is available also that would be great.Dear Suraj,
I have maintained the
a .user defined characteristic for Order Type
b. Added in the Operating Concern and Regenerated it
c. Added Derivation rule thru table look up for Order Type
Should i do any further steps (In CO-PA) for a CO-PA document related to Internal Orders to be generated thru billing cycle or i m fine with the steps i have done.
Pls let me know
Thanks a lot for your help
Ravi. -
P6 user name is not valid for connecting to the reporting database
No data is available because your P6 user name is not valid for connecting to the reporting database
I am getting above error in the following environment:
P6 running on wls instance 1.
BI Publisger running on wls instance 2
MS SQL server 2005
Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
(Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
So why do I get the error above?
I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
That did not solve the connection between P6 and BI Publisher though. What am I missing ...
Edited by: user3674522 on 10/11/2011 20:16Thought I found something but can't repliacte, som issue is still there:
Had a look at the wls instance logs where BI publisher is running, and the error I get is:
111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
Edited by: user3674522 on 10/11/2011 20:17 -
Report Painter values are not populating for a particular cost center
Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..Please check your variables in your report.
-
User details are not populating in access request
Hello All,
We have configured GRC 10 with LDAP and we are able to search the users in LDAP tcode(find option) and in the access request. But when i select the user and click on ok in the access request, user information is not populating to user details tab. I have followed the SAP Standard doc and configuration is fine. When i select data source as SAP system, user details are population as expected. But when i use LDAP as data source, i am having the issue. I hope this is an field mapping issue but i tried all different options but no solution i found. Kindly help me with your expert suggestions.
Field mapping is as follows:
LASTNAME
SN
FIRSTNAME
GIVENNAME
USERID
SAMACCOUNTNAME
ROLE_NAME
NAME
MEMBER_OF
MEMBEROF
EMAIL
MAIL
MANAGERID
MANAGER
Regards,
Jai Reddy.I know the path, but how to check it? is it using metaverse search?
Look at the Runs. Are they succeeding, or failing to connect?
Remove the Bit 17 and try again.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
The connection was denied because the user account is not authorized for remote login
Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.
Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
I would like to know this answer, as well. I have created a new AD group for my assistant admins called "Domain Admins (limited)". I have added this group to the GP setting "Allow log on through Terminal Services", but the
assistant admins cannot log in through RDP. It 'feels like' this is all I would need to do.
Craig
Found some good info
here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
2) Permissions on the RDP-listener must also be granted. If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled. If you are trying to utilize a new, custom group (as I am),
then there isn't a way to do this via group policy (that I have found).
EDIT: Found the answer. I am creating a blog post to outline the steps. They aren't hard, but they're not self-explanatory. It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
don't have to touch each computer. I think the above poster (Andrey Ganev) got it right, but
I had trouble deciphering his instructions.
Here is my blog post that walks through this entire process, step-by-step. -
Possibele entries are not populating for the fields on the selection screen
Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali -
I want to set User-define characteristics'group in receiver in pa-cycle.
I want to set User-define characteristics'group in receiver in pa-cycle.
I want to create PA cycle.
My pa structure included User-define characteristics.
When I creat PA cycle, I want to set User-define characteristics'group in receiver in pa-cycle.
How can I do it?I soved it using set(t-code : gs01)
-
My user name is not recognized for sync
On my new computer my user name is not recognized for the sync set up. I have sync on my other computers.
Is this the only account you have on your system? Is it an admin account?
You can try resetting the password using the Mac OS X install disc. The steps are outlined here: http://docs.info.apple.com/article.html?artnum=106156
Scroll to the part titled: "Resetting the original administrator account password."
Hope it helps. -
User Defined Characteristics for Operating Concern.
Hi All...,
I got the total list of characteristics from the core team for the Operating Concern.
Now some of the characteristics are there in the possible entries or Selection Box. Where as for the rest, we have to create manually with User Defined Parameters.
While creating the new characteristics in KEA0 with User defined option, it is not allowing me to enter the ORIGIN & CHECK TABLE, where it is taking the one default value T25**.
Now how can I create the new characteristics .
Regards.,
RajaHi,
When you create the new Characteristic, just input the Description, Short text & heading & the data type & length. When you click on save, system prompts you with a message " New check tables should be created for certain chars.
How should the entry of numbers for this table take place?"
Click on Automatic and the system will populate the ABAP dictionary & the Check Table, Text Table & Text field values.
If you create a Characteristic with reference to a SAP table, the Origin table & the Origin field values will get populated automatically. Origin is not relevant , if you select the User defined option while creating new Characteristics.
Assign points if useful.
Regards, -
User defined characteristics for planning hierarchy
Hi Experts,
I am using flexible planning for sales planning when I define a planning hierarchy, I want to include a user defined field also.
The requirement is like this, Planner wanted to see the cumulative sales figures of domestic and exports (Exports will be to more than one country. So I cant use countries for this).
How can I do this?
Request your expert advice.
RegardsHi Ram,
Thanks for the reply. Since Iam using flexible planning, I will be creating a user defined info structure. But my question is can I include a custom defined characteristic also in the hierarchy which is not available in the field catalogs for characteristics system is showing?
If so where should I define this characteristics first before assigning to the information structure.
Thanks & Regards
Enrico -
User defined field not appering on web for PO
Hi,
I have created One custom defined field for Purchase Order Herder level
As per specified in Note 672960
I have included in following structure :
INCL_EEW_PD_HEADER_CSF
INCL_EEW_PD_HEADER_CSF_PO
The user defined field appering in Function Module of BBP_PD_PO_GETDETAIL but its not appearing on SRM screen while on click on Process Purcjase Order and create from there.
I have checked in transaction there also not appering .
No Screen variant screen variant defined for that .
Can anybody help me on this issue .
Thanks,
SSHi
<b>Have you published all the respective HTML templates of the Internet service in this case. ?</b>
<u>Use transaction SE80 -> Select the drop-down option as Internet service. Give the service name - say BBP_POC (or your service name) in the left hand corner of the screen.
open the respective template screens and
Right click on the service to activate it on the proper Intenet site (Internal or any other sites defined in your case).</u>
<b>Detailed steps to check out (this is a general check-list)</b>
<u>When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.</u>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul -
CO-PA User Defined Characteristics
Hi
I have created several user defined characteristcs. When entering jouranls I need only two of them to be displayed and allowed for entry. At the moment all the new characteristics that I created are being displayed under "Proft.Segment. How can I restrict it?
ThanksHi,
Please create Char Group in KEPA and make the two feild mandatory in it
Then assign it to the transaction type RFBU in KE4G or to record type/trans type in KEVG2....
Now , Supress all other CO objects to this GL account from the field status group in OBC4 and allow only PSG (prof segment).. Make default setting to PSG in OKB9....
Now, system wont allow to post to this GL w/o PSG being populated and the PSG screen will not proceed w/o the two fileds.
Regards
Sarada
Maybe you are looking for
-
Problem with iTunes and iPhone Music organization. PLEASE READ AND HELP!
Hello All! I have this problem concerning iTunes and my iPhone. When I add music, and I update the Artist title to organize it in my iPhone, It shows EDITED on my mac in iTunes, but not my iPhone. I took a screen shot of what It shows. The TOP is iTu
-
Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on
-
WebLogic Server Administration Console shows EPM servers in ADMIN State
Hello everyone, We have a distibuted environment for Oracle EPM: Server 1 - Foundation Services, Essbase Server 2 - Reporting and Analysis Framework We are trying to replicate one of our customer's environment and as part of that we have done multipl
-
Idml open and idml Save As crash InDesign CS6 8.0.1
I am using: 2012 MacMini Mac OSX 10.8.3 2.6 GHz Intel Core i7, 8 gb 1600 MHz DDR3 InDesign CS6 Version 8.0.1 I have run software update Opening an idml file crashes InDesign. Saving a file to idml crashes InDesign. Assistance would be very much appre
-
[solved] tracker error initializing libicu support
Hey, tracker-search from the command line gives me no results and then: (tracker-search:28193): Tracker-WARNING **: Error initializing libicu support: 'U_ILLEGAL_ARGUMENT_ERROR' this is on my 64bit Arch Desktop. My 32bit Arch Netbook doesn't have thi