User-defined selection list support in HA Release 6.5

Dear all, As in Hyperion Wired for OLAP v4.1.2 and Hyperion Analyzer Release 5.0.3, it can allow users to create user-defined selection list for a dimension under "Advanced" option of Cube Navigator, is there the same function in Hyperion Analyzer Release 6.5? If no, is there any turnaround or alternative?Thanks for your help.Regards, Zero

Hello,
You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
Regards,
Shekhar Kulkarni

Similar Messages

  • User Exit to add user-defined selection critieria onto VL10G

    Does anyone know how to add user-defined selection criteria onto <b>VL10G</b> - Sales and purchase order display screen? OSS note <b>524424</b> states the userexit to transfer user-defined selection criteria from the selection screen to the report but no information on how to add the selection criteria on the screen. Is that something can be done through configuration or user-exit?
    Any advice or sample is greatly appreciated.

    I was in a hurry, I forgot to add, the user role specific selection screen assignment to VL10G is done at "delivery scenario" level
    The delivery scenarios that are predefined in the system can be found under Logistics Execution -> Outbound Process -> Goods Issue for Outbound Delivery -> Outbound Delivery -> Create -> Collective Processing of Documents for Shipment.
    You can make the following settings in a delivery scenario:
    <b>Selection screen</b>
    You can use the selection screen parameters to define the appearance of the selection screen used to select the delivery list.
    There are three combinations of selection parameters available that each include a different number of tabs.
    A long selection screen with no tabs
    A selection screen with three tabs
    A selection screen with six tabs
    The selection criteria is the same on all three screens in the standard system, it is simply arranged differently.
    This parameter also triggers scheduling of the report for processing the delivery list, with the same three available tab options.
    Customer enhancements are also possible in the LV50R_PREFZ1 program, which should be triggered from a delivery scenario.
    <b>User role</b>
    In the standard system, a predefined user role is assigned to each delivery scenario. If necessary, you can copy these user roles into your own user roles, make changes as required, and then assign them to a delivery scenario of your choice.
    If the user role assignment for a delivery scenario is changed in Customizing, the new settings are valid for all users that carry out this delivery scenario.

  • User defined selection screen

    Hi, In my program i used a default seelction screen and 5 user defined selection screen. Based on the selections made in default selection screen, it should go to the corresponding user defined screen.
    and the problem iam getting if i press enter jey insted of F8.
    ""Selection screen ZP2I_MASSCHANGE_TEMP1 1000 was
    not called using CALL SELECTION-SCREEN"""
    the code is as follows.
          A T   S E L E C T I O N-S C R E E N
    *AT SELECTION-SCREEN.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    CHECK SY-UCOMM EQ 'ONLI' OR SY-UCOMM EQ 'CRET' .
    Download
      IF r_dwnld = c_check.
    Material Screen Call
        IF r_matplt = c_check.
          CLEAR p_werks7.
          sree = 'A'.
          CALL SELECTION-SCREEN 170.
          ENDIF.
    Material Storage Screen Call
        IF r_matstr = c_check.
          CLEAR p_werks1.
          sree = 'B'.
          CALL SELECTION-SCREEN 110.
        ENDIF.
    Material Handling Screen Call
        IF r_mathan = c_check.
          CLEAR p_werks2.
          sree = 'C'.
          CALL SELECTION-SCREEN 120.
        ENDIF.
    Material Pick/Up Delivery Screen Call
        IF r_pcdt = c_check.
          CLEAR p_werks3.
          sree = 'D'.
          CALL SELECTION-SCREEN 130.
        ENDIF.
    Material Inboundlogistics Screen Call
        IF r_inlogs = c_check.
          CLEAR p_werks4.
          sree = 'E'.
          CALL SELECTION-SCREEN 140.
        ENDIF.
    Material Packaging Screen Call
        IF r_pkng = c_check.
          CLEAR p_werks5.
          sree = 'F'.
          CALL SELECTION-SCREEN 150.
        ENDIF.
      ENDIF.
    Upload Screen Call
      IF r_upld = c_check.
        IF ( r_matplt = c_check OR
           r_matstr = c_check OR
           r_mathan = c_check OR
           r_pcdt   = c_check OR
           r_inlogs = c_check OR
           r_pkng   = c_check  ).
          CLEAR p_uload.
          sree = 'G'.
          CALL SELECTION-SCREEN 160.
        ENDIF.
      ENDIF.
         s T A R T - O F - S E L E C T I O N
    START-OF-SELECTION.
    DOWNLOAD
      CASE sree.
        WHEN 'A'.
    Select Material Details
          PERFORM get_material_data.
          IF NOT tbl_matplt[] IS INITIAL.
            IF p_dalv7 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Storage data into local file
              PERFORM download_file USING  p_matdet.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 170.
    Select Material storage data
        WHEN 'B'.
          PERFORM get_storage_data.
          IF NOT tbl_matstr[] IS INITIAL.
            IF p_dalv1 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Storage data into local file
              PERFORM download_file USING  p_matstr.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 110.
    Select Material Handling data
        WHEN 'C'.
          PERFORM get_materialhandling.
          IF NOT tbl_mathand[] IS INITIAL.
            IF p_dalv2 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Material Handling data into local file
              PERFORM download_file USING  p_mathan.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 120.
    Select Pick/Up DayTime data
        WHEN 'D'.
          PERFORM get_pickup_delivery.
          IF NOT tbl_pcdel[] IS INITIAL.
            IF p_dalv3 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Pick/Up DayTime data into local file
              PERFORM download_file USING  p_pcdt.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 130.
    Select Inbound Logistics data
        WHEN 'E'.
          PERFORM get_inboundlogistics.
          IF NOT tbl_inlog[] IS INITIAL.
            IF p_dalv4 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Inbound Logistics data into local file
              PERFORM download_file USING  p_inlogs.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 140.
    Select Packaging data
        WHEN 'F'.
          PERFORM get_packaging.
          IF NOT tbl_pkng[] IS INITIAL.
            IF p_dalv5 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Packaging data into local file
              PERFORM download_file USING  p_pkng.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 150.
        WHEN 'G'.
    Material Details data upload
          IF r_matplt = c_check.
    Free memory IDs corresponding to upload tables
            PERFORM free_memory.
    Upload Material details from local file
            PERFORM load_file USING p_uload.
    Prepare data
            PERFORM prepare_mat_data.
    Get actual Material Details from ZP2_MATPLT
            PERFORM get_old_material_data.
    Validate new data against database entries
            PERFORM validate_material_data.
    Check Plant authorization
    Move plants to itab.
            REFRESH tbl_plts.
            LOOP AT tbl_matplt.
              tbl_plts-werks = tbl_matplt-werks.
              APPEND tbl_plts.
              CLEAR  tbl_plts.
            ENDLOOP.
            DELETE ADJACENT DUPLICATES FROM tbl_plts
            COMPARING werks.
    Check authoriztions
            PERFORM check_plant_authorization1 TABLES tbl_plts.
            REFRESH tbl_plts.
            IF p_trun IS INITIAL.
    Modify material data
              PERFORM modify_zp2_matplt.
            ENDIF.
    Material Storage data upload
            IF r_matstr = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload material storage data from local file
       PERFORM load_matstr_data USING p_uload.
              PERFORM load_file USING p_uload.
    Get the material storage data from database
              PERFORM get_old_storage_data.
    Get material plant data for the corresponding
    Storage data.
              PERFORM get_matplt_data_storage.
    Get data from table fields
              PERFORM get_tblfld_values.
    Validate data against database entries
              PERFORM validate_storage_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_matstr.
                tbl_plts-werks = tbl_matstr-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify material storage data
                PERFORM modify_zp2matstr_table.
              ENDIF.
            ENDIF.
    Material Handling data upload
            IF r_mathan = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload material Handling data from local file
              PERFORM load_file USING p_uload.
    Get the material Handling data from database
              PERFORM get_old_materialhandling.
    Get material plant data for the corresponding
    handling data.
              PERFORM get_matplt_data_handling.
    Validate data against database entries
              PERFORM validate_handling_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_mathand.
                tbl_plts-werks = tbl_mathand-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify material handling data
                PERFORM modify_zp2mathand_table.
              ENDIF.
       ELSEIF sy-ucomm = c_s.
         LEAVE SCREEN.
            ENDIF.
    Material Pick/Up DayTime data upload
            IF r_pcdt = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Pick/Up DayTime file data from local file
              PERFORM load_file USING p_uload.
    Get the Pick/Up DayTime data from database
              PERFORM get_old_pickup_delivery.
    Get Inbound logistics data corresponding to handling
              PERFORM get_inlogs_pcdel.
    Validate data against database entries
              PERFORM validate_pcdel_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_pcdel.
                tbl_plts-werks = tbl_pcdel-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Pick/Up DayTime table
                PERFORM modify_zp2pcdt_table.
              ENDIF.
       ELSEIF sy-ucomm = c_s.
         LEAVE SCREEN.
            ENDIF.
    Material Inbound Logistics data upload
            IF r_inlogs = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Inbound Logistics file data from local file
              PERFORM load_file USING p_uload.
    Get the Inbound Logistics data from database
              PERFORM get_old_inboundlogistics.
    Get data from table fields
              PERFORM get_tblfld_values.
    Get Vendor data
              PERFORM get_vendor_inlog.
    Get material plant data for the corresponding
    Inboundlogistics data.
              PERFORM get_matplt_data_inlog.
    Validate data against database entries
              PERFORM validate_inlog_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_inlog.
                tbl_plts-werks = tbl_inlog-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Inbound Logistics table
                PERFORM modify_zp2inlog_table.
              ENDIF.
            ENDIF.
    Packaging data upload
            IF r_pkng = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Packaging file data from local file
              PERFORM load_file USING p_uload.
    Get the Packaging data from database
              PERFORM get_old_packaging.
    Get material plant data for the corresponding
    Packaging data.
              PERFORM get_matplt_data_pkng.
    Get Vendor data
              PERFORM get_vendor_pkng.
    Get data from table fields
              PERFORM get_tblfld_values.
    Load Primary container reference data
              PERFORM primary_container_data.
    Validate data against database entries
              PERFORM validate_packaging_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_pkng.
                tbl_plts-werks = tbl_pkng-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Packaging data
                PERFORM modify_zp2pckg_table.
              ENDIF.
            ENDIF.
          ENDIF.
       IF p_trun = c_check.
    Display the Error list
        PERFORM display_result.
          CALL SELECTION-SCREEN 160.
      ENDIF.
      ENDCASE.
    Another problem is If i press BACK on the report output, it is coming to the default selection screen. and my requirement is, it should come to the corressponding user defined selection screen and not the default selection screen.
    PLz help me in this regard.. Iam breaking my heading, but could not able to solve it.
    Thanks in advance
    sree

    Hello,
    You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
    Regards,
    Shekhar Kulkarni

  • Create a user-defined selection variant in transaction ME21N

    Hi,
    In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
    Any help would certainly be appreciated.
    Thanks,
    Alam.

    I would suggest that you replay the transaction with breaks, so that you can see exactly what is happening (in the start options, set the SAPGUI replay options to stop at each ProcessedScreen)
    It may be that the Selection Variant button is not present during replay. In this case, you would need to make the step where this button is pressed as optional.
    ME21N is a difficult transaction to automate because it always remembers what you were last doing in it and restarts the transaction from that point.  You can delete the user settings (so you always start the transaction as though for the first time) using the following code in your script:
    ABAP.
    * Delete all User-Settings in MM
      DELETE FROM ESDUS WHERE UNAME = SY-UNAME.
    * Delete all User-Settings in search help
      DELETE FROM DDSHDEFSH WHERE USERNAME = SY-UNAME.
    ENDABAP.

  • Creating a User-defined Selection variant for Transaction ME21N

    Hi,
    In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
    Any help would certainly be appreciated.
    Thanks,
    Alam.

    So I am having a similar issue. I have a fixed length flat file with 3 different record types.
    1 a header ( length is 82 bytes with the first byte set to H ( single record always the first )
    2 a detail record ( length is 382 bytes ) with the first byte set to D ( multiple records )
    3 a trailer record ( length is 82 bytes ) with the first byte set to T ( single record always the last )
    I created a UD OTD with 3 elements for each record type, RECORD_TYPE is the first field 1 byte. Matching for each on either H,D, or T. When I try and test the OTD with the Run Test button I get an unmarshal error
    <SOD>""<POS>"HACCUMULAT..." failed input match, Fog#431, after <no path>: failed node: trailing junk in fixed/parent
    HACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 0 0
    D ar3531 ar3531 ar3531 ar3531000 55887027260 30.000 30 5098765 20080804 000T114 120080806 82820P30000001024511 25.00 0.00 25.00 0.00 25.00 25.00 0.00 0.00 0.00 0.00 0.00T
    TACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 2894 0 0
    Not sure whats going on, so if anyone has any suggestions on where to look that would be great
    Thanks

  • Problem with user defined selection-screens

    Hi,
    in my case, i have a default selection screen and a user defined selection screen. Now, after selecting a radio button in default selection screen, the user defined selection screen is called. after executing it report output is displayed. now if i press f3 (back) it is going to default selection screen. here my requirement is, when i press f3 it should go to the user defined selection.
    Can u plz help me solve this.
    bye n regards
    sree

    Any modifications to screen 1000 will be lost the next time the program is generated.
    When the user hits the back key from the report output, your ABAP is restarted just like when you originally started it.  That is why you are getting the default selection screen again.
    Use the AT USER-COMMAND event.  When BACK is hit from the report, use the SUBMIT command to re-execute the program, passing it the selections from the default selection screen.  Leave out the RETURN option.
    For help on filling the selection screen during SUBMIT, help is available at
    http://help.sap.com/saphelp_470/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm

  • Problem with ALV and user defined selection screen. please help!

    Hi Experts,
           I have program which has a user defined selection screen 9001. On executing the selection screen i call a ALV using resuse_alv_grid function module.
    What problem I am facing is that when I press back button from ALV page it goes to the se38 editor instead of selection screen.
    How to resolve this?
    Thanks
    Gopal

    Hi,
    This might be due to LEAVE TO TRANSACTION statement. You might be running the program from SE38. Try to run the program using Z-TCode assigned to it.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was edited by: Bharat Reddy V

  • Transporting user defined selection screen from one server to another

    How to transport a user defined selection screen (0100) from one server to another.
    PBO and PAI modules written in PBO and PAI events for the selection screen are
    not transported.
    How to transport the modules in the events for the selection screen.

    Hi,
    Krishna, <b>All</b> the Objects(prms,classes,tables,stru...) will be transported thru Transport Objects only..
    Check Utilities->version->Version Mgt -> Here u will have the Transport number(if it's created under trnasportable obj).If you do not find TP no,then u would hav saved that as a Local Object.
    Then Relase the TP no from SE10 Trnx.
    Rgds,
    Jothi.P

  • User defined Selection screen for Logical database

    hi all,
           can we display a user defined selection screen instead of the default selection screen in LDB . eg pnp
    cheers
    senthil

    Hi,
    to my knowledge, the selection screen of a logical database can only be changed (versions!) in the logical database itself.
    What you can do is, write a program with your own selection screen an then either call another program that uses the LDB or -  much better - you call the LDB from your program with function module LDB_PROCESS!
    Example taken from the example library (TA ABAPDOCU):
    <b>REPORT demo_logical_database.
    DATA wa_spfli TYPE spfli.
    SELECT-OPTIONS s_carr FOR wa_spfli-carrid.
    DATA: callback TYPE TABLE OF ldbcb,
          callback_wa LIKE LINE OF callback.
    DATA: seltab TYPE TABLE OF rsparams,
          seltab_wa LIKE LINE OF seltab.
    callback_wa-ldbnode     = 'SPFLI'.
    callback_wa-get         = 'X'.
    callback_wa-get_late    = 'X'.
    callback_wa-cb_prog     = sy-repid.
    callback_wa-cb_form     = 'CALLBACK_SPFLI'.
    APPEND callback_wa TO callback.
    CLEAR callback_wa.
    callback_wa-ldbnode     = 'SFLIGHT'.
    callback_wa-get         = 'X'.
    callback_wa-cb_prog     = sy-repid.
    callback_wa-cb_form     = 'CALLBACK_SFLIGHT'.
    APPEND callback_wa TO callback.
    seltab_wa-kind = 'S'.
    seltab_wa-selname = 'CARRID'.
    LOOP AT s_carr.
      MOVE-CORRESPONDING s_carr TO seltab_wa.
      APPEND seltab_wa TO seltab.
    ENDLOOP.
    CALL FUNCTION 'LDB_PROCESS'
         EXPORTING
              ldbname                     = 'F1S'
              variant                     = ' '
         TABLES
              callback                    = callback
              selections                  = seltab
         EXCEPTIONS
              ldb_not_reentrant           = 1
              ldb_incorrect               = 2
              ldb_already_running         = 3
              ldb_error                   = 4
              ldb_selections_error        = 5
              ldb_selections_not_accepted = 6
              variant_not_existent        = 7
              variant_obsolete            = 8
              variant_error               = 9
              free_selections_error       = 10
              callback_no_event           = 11
              callback_node_duplicate     = 12
              OTHERS                      = 13.
    IF sy-subrc <> 0.
      WRITE: 'Exception with SY-SUBRC', sy-subrc.
    ENDIF.
    FORM callback_spfli USING name  TYPE ldbn-ldbnode
                              wa    TYPE spfli
                              evt   TYPE c
                              check TYPE c.
      CASE evt.
        WHEN 'G'.
          WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
          ULINE.
        WHEN 'L'.
          ULINE.
      ENDCASE.
    ENDFORM.
    FORM callback_sflight USING name  TYPE ldbn-ldbnode
                                wa    TYPE sflight
                                evt   TYPE c
                                check TYPE c.
      WRITE: / wa-fldate, wa-seatsocc, wa-seatsmax.
    ENDFORM.</b>

  • 11.1.3 - Reporting - User Defined Member Lists

    I exported a report from our production environment which is version 9.3.1 and imported into our development environment which is version 11.1.3 via Workspace and the user defined member list was not imported. Is there a way to have them included when reports are exported or do they have to recreated after they are imported?
    Edited by: DPA1101 on Apr 8, 2010 11:55 AM

    I'm running 11.1.1.3 and just ran into some problems with user-defined lists and found out that, for reports using Essbase as the source, the lists are stored as txt files in the database directory. So exporting the reports will never include the lists. You would need to copy the files from one server to the other. There are at least 3 files. Two of them are like indexes. The third contains XML with the actual list.
    We're just starting to play with user lists so I haven't figured out if the naming convention I'm seeing is consistent everywhere. In my case, I have a file named ADMDir.txt. This has a single entry that points to another file. That file contains the list names and references to the files that contains the list (in xml).
    I hope this helps.
    Jerry

  • User defined selection screen sequence

    Hello Everyone,
    I have a kind of an issue with selection screens. Story goes like this. I have a main sel.screen (no 1000) where I have some selection list. Now based on this selection i display another sel.screen (with my given number, let's say 9000). Then i fill selection criterion on screen 9000 press F8 and I get results. So far so good. Now when i 'back' button system displays the first, initial sel.screen (1000) instead of the last displayed (9000). I've tried to modify this behaviour and I am able to display the last sel.screen (9000) after pressing 'back' button but then when i press 'F8' instead of results I get initial sel.screen (1000) again. Is there anything I could do to make it work in the way I want to ?
    Regards
    Pawel

    Ok so let me present the code (or at least the most important parts) as Selva asked because using 'set screen 0' did not help. it is possible that I used it in wrong place so even more presenting code should help:
    * some global data definition
    *definition of mail sel.screen:
    SELECTION-SCREEN BEGIN OF BLOCK selscr1
                     WITH FRAME TITLE text-001.
    PARAMETERS: "select interface
         p_i001(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
    SELECTION-SCREEN END   OF BLOCK selscr1.
    *definiotion of following sel.screens;
    SELECTION-SCREEN BEGIN OF SCREEN 1002.
      SELECTION-SCREEN BEGIN OF BLOCK selscr2 WITH FRAME TITLE text-001.
        PARAMETER: p_ws02(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
    *    PARAMETER: p_t02 like GV_TABNAME DEFAULT 'zint_v_infin002'.
      SELECTION-SCREEN END   OF BLOCK selscr2.
    SELECTION-SCREEN end OF SCREEN 1002.
    SELECTION-SCREEN BEGIN OF SCREEN 1004.
      SELECTION-SCREEN BEGIN OF BLOCK selscr3 WITH FRAME TITLE text-001.
        PARAMETER: p_ws04(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
      SELECTION-SCREEN END   OF BLOCK selscr3.
    SELECTION-SCREEN end OF SCREEN 1004.
    *******************   END OF SCREENS ***********************************************************
    AT SELECTION-SCREEN ON p_i001. "parameter from screen 1000
      CASE p_i001.
        WHEN '002'.
          call SELECTION-SCREEN 1002.
        WHEN '004'.
          call SELECTION-SCREEN 1004.
        WHEN OTHERS.
          CALL SELECTION-SCREEN 1000.
       ENDCASE.
    *** some settings made basing on selections from following screens
    AT selection-SCREEN on p_ws02.
      gv_werks = p_ws02.
    AT selection-SCREEN on p_ws04.
      gv_werks = p_ws04.
    INITIALIZATION
    * filling listbox
    START-OF-SELECTION.
      CASE p_i001.
        WHEN '002'.
         "select 002 relevant data
         "alv display
        WHEN '004'.
         "select 004 relevant data
         "alv display
      ENDCASE.
      END-OF-SELECTION.
    so as i mentioned before when i press 'back' on alv list I end up with screen 1000 instead 1004 (it's 1004 in real life not 9000). when i tried to change i was able to display 1004 selection when i pressed 'back' on alv but then instead of getting new list system takes ma back to 1000 scr again
    regards
    Pawel

  • How to allow user defined in list item to see item using only Designer. Approver set in list item can't see items they are to approve.

    SharePoint 2010 and Designer 2010.
    We have a list of items that users enter information into. Only the user who enters the data can see the item. It's confidential stuff. 
    One field is the name of the person who will approve this record.
    Workflow sends approver an email and sets a task to approve the item. 
    Problem is that the user set as approver cannot see the item. 
    We can't have a list of approvers - as all staff can potentially be approvers.
    We can't allow anyone other than the person who created the item and the person that is set as approver in a field to have access. 
    I am not a programmer, but a user of SharePoint Designer 2010. 
    (I did think we had this sorted by sending an email containing all the list item fields, but this task still requires permissions). 

    Hi ,
    I understand that after you grant user permission on current item ,the user still cannot approve the workflow task .This is because the user doesn't have approve permission in the Tasks list .You only grant the user permission on current item in current
    list ,so he can approve the item by clicking the Approve/Reject in the edit control block .
    Your workflow is correct ,now you need to grant the users Approve (a permission level) permission in the Tasks list settings .In this way ,the users can finish the tasks .
    Thanks
    Entan Ming
    TechNet Community Support

  • Logical database : user defined selection screen

    Hi Experts,
                 I am working with HR-ABAP. The logical databases provide a selection screen......but i want to use a selection screen of my own and not that of the LDB.
    Plz help...............

    hi do like this....
    go to attributes-->hr report catagory-->master data...here use the value _____000(5underscores and 000 )..
    you wii get that..
    regards,
    venkat

  • TO HAVE USER DEFINED SELECTION SCREEN USING LOGICAL DATABASE AFI

    AFI is the logical database i need to use, but if i include the AFI is the program attributes, i get the selection screen which is already there for AFI, but i need to get the selection screen, that i have defined

    Hi ,
    you can exclude sel. from ldb with
    loop at screen - statement
    and you can include your own sel-option and parameters
    regards Andreas

  • User defined Field refresh during copying Sales Quotation in SO

    Dear Colleagues,
    We are doing an implementation of B1 2004A PL14. We have defined a few user defined fields (Select fields) and using them in Quotation, SO and Delivery. Now,
    when we create a Quotation and select a value from user-defined selection and then copy this Quotation in SO to create a SO the field value shows up for fraction of second and then clears itself and becomes blank. For some of the fields its working and for others its not even though all of them are defined in the same way.
    This is delaying our go-live. It will be great if we get some suggestions on this.
    Thanks & Regards,
    Manish

    Hi Manish,
    Unfortunately I don't know what might cause your problems.
    I would highly recommend to involve SAP Support to get your problem fixed.
    Sorry,
    Frank

Maybe you are looking for

  • Problem update Adobe Premiere Pro CC(2014)

    Hello, when I try to update Adobe Premiere Pro CC 2014 the system give me this error "Unable to extract the downloaded files. To download please selected try again. (U44M1L210) Nicolò

  • Everythings up and running again.

    First up I used the delete the prepublishstate.plist trick, this stopped iweb publishing everything all over every time. I'd previously allowed iweb to run it's publish after an error message, only quitting when activity monitor levels dropped off. E

  • Can't create a printer icon

    Hello, I've a Powermac G3 266 Mhz and I want to install the HP laserjet 2550ln. I upgrade the system from os 8.0 to 9.2 to install the printer. Then I use the Printer Utility (in the folder Utilities) to create the printer icon: I select Printer LPR

  • Can we have the Curser Focus change automatically?

    I have an iMac. The software I use are common software like Page, for a word processor, and Numbers, for a spread sheet. In Numbers, when I hover over a cell, the cursor changes to allow me to select the cell. When I hover over a text box the cursor

  • Low clock speed with amd 3400+

    hi all, i have an amd 3400+  64bit  and i have downloaded multiple hardware information programs which state that my CPU clock should be between 2.8ghz - 3 ghz with this type of processor, however i only have 2.1 ghz.I have searched the bios and have