User defined selection screen sequence

Hello Everyone,
I have a kind of an issue with selection screens. Story goes like this. I have a main sel.screen (no 1000) where I have some selection list. Now based on this selection i display another sel.screen (with my given number, let's say 9000). Then i fill selection criterion on screen 9000 press F8 and I get results. So far so good. Now when i 'back' button system displays the first, initial sel.screen (1000) instead of the last displayed (9000). I've tried to modify this behaviour and I am able to display the last sel.screen (9000) after pressing 'back' button but then when i press 'F8' instead of results I get initial sel.screen (1000) again. Is there anything I could do to make it work in the way I want to ?
Regards
Pawel

Ok so let me present the code (or at least the most important parts) as Selva asked because using 'set screen 0' did not help. it is possible that I used it in wrong place so even more presenting code should help:
* some global data definition
*definition of mail sel.screen:
SELECTION-SCREEN BEGIN OF BLOCK selscr1
                 WITH FRAME TITLE text-001.
PARAMETERS: "select interface
     p_i001(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
SELECTION-SCREEN END   OF BLOCK selscr1.
*definiotion of following sel.screens;
SELECTION-SCREEN BEGIN OF SCREEN 1002.
  SELECTION-SCREEN BEGIN OF BLOCK selscr2 WITH FRAME TITLE text-001.
    PARAMETER: p_ws02(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
*    PARAMETER: p_t02 like GV_TABNAME DEFAULT 'zint_v_infin002'.
  SELECTION-SCREEN END   OF BLOCK selscr2.
SELECTION-SCREEN end OF SCREEN 1002.
SELECTION-SCREEN BEGIN OF SCREEN 1004.
  SELECTION-SCREEN BEGIN OF BLOCK selscr3 WITH FRAME TITLE text-001.
    PARAMETER: p_ws04(4) as listbox visible length 20 OBLIGATORY DEFAULT 'XXX'.
  SELECTION-SCREEN END   OF BLOCK selscr3.
SELECTION-SCREEN end OF SCREEN 1004.
*******************   END OF SCREENS ***********************************************************
AT SELECTION-SCREEN ON p_i001. "parameter from screen 1000
  CASE p_i001.
    WHEN '002'.
      call SELECTION-SCREEN 1002.
    WHEN '004'.
      call SELECTION-SCREEN 1004.
    WHEN OTHERS.
      CALL SELECTION-SCREEN 1000.
   ENDCASE.
*** some settings made basing on selections from following screens
AT selection-SCREEN on p_ws02.
  gv_werks = p_ws02.
AT selection-SCREEN on p_ws04.
  gv_werks = p_ws04.
INITIALIZATION
* filling listbox
START-OF-SELECTION.
  CASE p_i001.
    WHEN '002'.
     "select 002 relevant data
     "alv display
    WHEN '004'.
     "select 004 relevant data
     "alv display
  ENDCASE.
  END-OF-SELECTION.
so as i mentioned before when i press 'back' on alv list I end up with screen 1000 instead 1004 (it's 1004 in real life not 9000). when i tried to change i was able to display 1004 selection when i pressed 'back' on alv but then instead of getting new list system takes ma back to 1000 scr again
regards
Pawel

Similar Messages

  • Problem with user defined selection-screens

    Hi,
    in my case, i have a default selection screen and a user defined selection screen. Now, after selecting a radio button in default selection screen, the user defined selection screen is called. after executing it report output is displayed. now if i press f3 (back) it is going to default selection screen. here my requirement is, when i press f3 it should go to the user defined selection.
    Can u plz help me solve this.
    bye n regards
    sree

    Any modifications to screen 1000 will be lost the next time the program is generated.
    When the user hits the back key from the report output, your ABAP is restarted just like when you originally started it.  That is why you are getting the default selection screen again.
    Use the AT USER-COMMAND event.  When BACK is hit from the report, use the SUBMIT command to re-execute the program, passing it the selections from the default selection screen.  Leave out the RETURN option.
    For help on filling the selection screen during SUBMIT, help is available at
    http://help.sap.com/saphelp_470/helpdata/en/9f/dba51a35c111d1829f0000e829fbfe/frameset.htm

  • Problem with ALV and user defined selection screen. please help!

    Hi Experts,
           I have program which has a user defined selection screen 9001. On executing the selection screen i call a ALV using resuse_alv_grid function module.
    What problem I am facing is that when I press back button from ALV page it goes to the se38 editor instead of selection screen.
    How to resolve this?
    Thanks
    Gopal

    Hi,
    This might be due to LEAVE TO TRANSACTION statement. You might be running the program from SE38. Try to run the program using Z-TCode assigned to it.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was edited by: Bharat Reddy V

  • Transporting user defined selection screen from one server to another

    How to transport a user defined selection screen (0100) from one server to another.
    PBO and PAI modules written in PBO and PAI events for the selection screen are
    not transported.
    How to transport the modules in the events for the selection screen.

    Hi,
    Krishna, <b>All</b> the Objects(prms,classes,tables,stru...) will be transported thru Transport Objects only..
    Check Utilities->version->Version Mgt -> Here u will have the Transport number(if it's created under trnasportable obj).If you do not find TP no,then u would hav saved that as a Local Object.
    Then Relase the TP no from SE10 Trnx.
    Rgds,
    Jothi.P

  • User defined selection screen

    Hi, In my program i used a default seelction screen and 5 user defined selection screen. Based on the selections made in default selection screen, it should go to the corresponding user defined screen.
    and the problem iam getting if i press enter jey insted of F8.
    ""Selection screen ZP2I_MASSCHANGE_TEMP1 1000 was
    not called using CALL SELECTION-SCREEN"""
    the code is as follows.
          A T   S E L E C T I O N-S C R E E N
    *AT SELECTION-SCREEN.
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    CHECK SY-UCOMM EQ 'ONLI' OR SY-UCOMM EQ 'CRET' .
    Download
      IF r_dwnld = c_check.
    Material Screen Call
        IF r_matplt = c_check.
          CLEAR p_werks7.
          sree = 'A'.
          CALL SELECTION-SCREEN 170.
          ENDIF.
    Material Storage Screen Call
        IF r_matstr = c_check.
          CLEAR p_werks1.
          sree = 'B'.
          CALL SELECTION-SCREEN 110.
        ENDIF.
    Material Handling Screen Call
        IF r_mathan = c_check.
          CLEAR p_werks2.
          sree = 'C'.
          CALL SELECTION-SCREEN 120.
        ENDIF.
    Material Pick/Up Delivery Screen Call
        IF r_pcdt = c_check.
          CLEAR p_werks3.
          sree = 'D'.
          CALL SELECTION-SCREEN 130.
        ENDIF.
    Material Inboundlogistics Screen Call
        IF r_inlogs = c_check.
          CLEAR p_werks4.
          sree = 'E'.
          CALL SELECTION-SCREEN 140.
        ENDIF.
    Material Packaging Screen Call
        IF r_pkng = c_check.
          CLEAR p_werks5.
          sree = 'F'.
          CALL SELECTION-SCREEN 150.
        ENDIF.
      ENDIF.
    Upload Screen Call
      IF r_upld = c_check.
        IF ( r_matplt = c_check OR
           r_matstr = c_check OR
           r_mathan = c_check OR
           r_pcdt   = c_check OR
           r_inlogs = c_check OR
           r_pkng   = c_check  ).
          CLEAR p_uload.
          sree = 'G'.
          CALL SELECTION-SCREEN 160.
        ENDIF.
      ENDIF.
         s T A R T - O F - S E L E C T I O N
    START-OF-SELECTION.
    DOWNLOAD
      CASE sree.
        WHEN 'A'.
    Select Material Details
          PERFORM get_material_data.
          IF NOT tbl_matplt[] IS INITIAL.
            IF p_dalv7 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Storage data into local file
              PERFORM download_file USING  p_matdet.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 170.
    Select Material storage data
        WHEN 'B'.
          PERFORM get_storage_data.
          IF NOT tbl_matstr[] IS INITIAL.
            IF p_dalv1 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Storage data into local file
              PERFORM download_file USING  p_matstr.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 110.
    Select Material Handling data
        WHEN 'C'.
          PERFORM get_materialhandling.
          IF NOT tbl_mathand[] IS INITIAL.
            IF p_dalv2 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Material Handling data into local file
              PERFORM download_file USING  p_mathan.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 120.
    Select Pick/Up DayTime data
        WHEN 'D'.
          PERFORM get_pickup_delivery.
          IF NOT tbl_pcdel[] IS INITIAL.
            IF p_dalv3 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Pick/Up DayTime data into local file
              PERFORM download_file USING  p_pcdt.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 130.
    Select Inbound Logistics data
        WHEN 'E'.
          PERFORM get_inboundlogistics.
          IF NOT tbl_inlog[] IS INITIAL.
            IF p_dalv4 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Inbound Logistics data into local file
              PERFORM download_file USING  p_inlogs.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 140.
    Select Packaging data
        WHEN 'F'.
          PERFORM get_packaging.
          IF NOT tbl_pkng[] IS INITIAL.
            IF p_dalv5 = c_check.
    Display list in ALV
              PERFORM setup_alv_report.
            ELSE.
    Download Packaging data into local file
              PERFORM download_file USING  p_pkng.
            ENDIF.
          ELSE.
            MESSAGE s020.
          ENDIF.
          CALL SELECTION-SCREEN 150.
        WHEN 'G'.
    Material Details data upload
          IF r_matplt = c_check.
    Free memory IDs corresponding to upload tables
            PERFORM free_memory.
    Upload Material details from local file
            PERFORM load_file USING p_uload.
    Prepare data
            PERFORM prepare_mat_data.
    Get actual Material Details from ZP2_MATPLT
            PERFORM get_old_material_data.
    Validate new data against database entries
            PERFORM validate_material_data.
    Check Plant authorization
    Move plants to itab.
            REFRESH tbl_plts.
            LOOP AT tbl_matplt.
              tbl_plts-werks = tbl_matplt-werks.
              APPEND tbl_plts.
              CLEAR  tbl_plts.
            ENDLOOP.
            DELETE ADJACENT DUPLICATES FROM tbl_plts
            COMPARING werks.
    Check authoriztions
            PERFORM check_plant_authorization1 TABLES tbl_plts.
            REFRESH tbl_plts.
            IF p_trun IS INITIAL.
    Modify material data
              PERFORM modify_zp2_matplt.
            ENDIF.
    Material Storage data upload
            IF r_matstr = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload material storage data from local file
       PERFORM load_matstr_data USING p_uload.
              PERFORM load_file USING p_uload.
    Get the material storage data from database
              PERFORM get_old_storage_data.
    Get material plant data for the corresponding
    Storage data.
              PERFORM get_matplt_data_storage.
    Get data from table fields
              PERFORM get_tblfld_values.
    Validate data against database entries
              PERFORM validate_storage_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_matstr.
                tbl_plts-werks = tbl_matstr-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify material storage data
                PERFORM modify_zp2matstr_table.
              ENDIF.
            ENDIF.
    Material Handling data upload
            IF r_mathan = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload material Handling data from local file
              PERFORM load_file USING p_uload.
    Get the material Handling data from database
              PERFORM get_old_materialhandling.
    Get material plant data for the corresponding
    handling data.
              PERFORM get_matplt_data_handling.
    Validate data against database entries
              PERFORM validate_handling_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_mathand.
                tbl_plts-werks = tbl_mathand-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify material handling data
                PERFORM modify_zp2mathand_table.
              ENDIF.
       ELSEIF sy-ucomm = c_s.
         LEAVE SCREEN.
            ENDIF.
    Material Pick/Up DayTime data upload
            IF r_pcdt = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Pick/Up DayTime file data from local file
              PERFORM load_file USING p_uload.
    Get the Pick/Up DayTime data from database
              PERFORM get_old_pickup_delivery.
    Get Inbound logistics data corresponding to handling
              PERFORM get_inlogs_pcdel.
    Validate data against database entries
              PERFORM validate_pcdel_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_pcdel.
                tbl_plts-werks = tbl_pcdel-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Pick/Up DayTime table
                PERFORM modify_zp2pcdt_table.
              ENDIF.
       ELSEIF sy-ucomm = c_s.
         LEAVE SCREEN.
            ENDIF.
    Material Inbound Logistics data upload
            IF r_inlogs = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Inbound Logistics file data from local file
              PERFORM load_file USING p_uload.
    Get the Inbound Logistics data from database
              PERFORM get_old_inboundlogistics.
    Get data from table fields
              PERFORM get_tblfld_values.
    Get Vendor data
              PERFORM get_vendor_inlog.
    Get material plant data for the corresponding
    Inboundlogistics data.
              PERFORM get_matplt_data_inlog.
    Validate data against database entries
              PERFORM validate_inlog_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_inlog.
                tbl_plts-werks = tbl_inlog-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Inbound Logistics table
                PERFORM modify_zp2inlog_table.
              ENDIF.
            ENDIF.
    Packaging data upload
            IF r_pkng = c_check.
    Free memory IDs corresponding to upload tables
              PERFORM free_memory.
    Upload Packaging file data from local file
              PERFORM load_file USING p_uload.
    Get the Packaging data from database
              PERFORM get_old_packaging.
    Get material plant data for the corresponding
    Packaging data.
              PERFORM get_matplt_data_pkng.
    Get Vendor data
              PERFORM get_vendor_pkng.
    Get data from table fields
              PERFORM get_tblfld_values.
    Load Primary container reference data
              PERFORM primary_container_data.
    Validate data against database entries
              PERFORM validate_packaging_data.
    Check Plant authorization
    Move plants to itab.
              REFRESH tbl_plts.
              LOOP AT tbl_pkng.
                tbl_plts-werks = tbl_pkng-werks.
                APPEND tbl_plts.
                CLEAR  tbl_plts.
              ENDLOOP.
              DELETE ADJACENT DUPLICATES FROM tbl_plts
              COMPARING werks.
    Check authoriztions
              PERFORM check_plant_authorization1 TABLES tbl_plts.
              REFRESH tbl_plts.
              IF p_trun IS INITIAL.
    Modify Packaging data
                PERFORM modify_zp2pckg_table.
              ENDIF.
            ENDIF.
          ENDIF.
       IF p_trun = c_check.
    Display the Error list
        PERFORM display_result.
          CALL SELECTION-SCREEN 160.
      ENDIF.
      ENDCASE.
    Another problem is If i press BACK on the report output, it is coming to the default selection screen. and my requirement is, it should come to the corressponding user defined selection screen and not the default selection screen.
    PLz help me in this regard.. Iam breaking my heading, but could not able to solve it.
    Thanks in advance
    sree

    Hello,
    You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
    Regards,
    Shekhar Kulkarni

  • User defined Selection screen for Logical database

    hi all,
           can we display a user defined selection screen instead of the default selection screen in LDB . eg pnp
    cheers
    senthil

    Hi,
    to my knowledge, the selection screen of a logical database can only be changed (versions!) in the logical database itself.
    What you can do is, write a program with your own selection screen an then either call another program that uses the LDB or -  much better - you call the LDB from your program with function module LDB_PROCESS!
    Example taken from the example library (TA ABAPDOCU):
    <b>REPORT demo_logical_database.
    DATA wa_spfli TYPE spfli.
    SELECT-OPTIONS s_carr FOR wa_spfli-carrid.
    DATA: callback TYPE TABLE OF ldbcb,
          callback_wa LIKE LINE OF callback.
    DATA: seltab TYPE TABLE OF rsparams,
          seltab_wa LIKE LINE OF seltab.
    callback_wa-ldbnode     = 'SPFLI'.
    callback_wa-get         = 'X'.
    callback_wa-get_late    = 'X'.
    callback_wa-cb_prog     = sy-repid.
    callback_wa-cb_form     = 'CALLBACK_SPFLI'.
    APPEND callback_wa TO callback.
    CLEAR callback_wa.
    callback_wa-ldbnode     = 'SFLIGHT'.
    callback_wa-get         = 'X'.
    callback_wa-cb_prog     = sy-repid.
    callback_wa-cb_form     = 'CALLBACK_SFLIGHT'.
    APPEND callback_wa TO callback.
    seltab_wa-kind = 'S'.
    seltab_wa-selname = 'CARRID'.
    LOOP AT s_carr.
      MOVE-CORRESPONDING s_carr TO seltab_wa.
      APPEND seltab_wa TO seltab.
    ENDLOOP.
    CALL FUNCTION 'LDB_PROCESS'
         EXPORTING
              ldbname                     = 'F1S'
              variant                     = ' '
         TABLES
              callback                    = callback
              selections                  = seltab
         EXCEPTIONS
              ldb_not_reentrant           = 1
              ldb_incorrect               = 2
              ldb_already_running         = 3
              ldb_error                   = 4
              ldb_selections_error        = 5
              ldb_selections_not_accepted = 6
              variant_not_existent        = 7
              variant_obsolete            = 8
              variant_error               = 9
              free_selections_error       = 10
              callback_no_event           = 11
              callback_node_duplicate     = 12
              OTHERS                      = 13.
    IF sy-subrc <> 0.
      WRITE: 'Exception with SY-SUBRC', sy-subrc.
    ENDIF.
    FORM callback_spfli USING name  TYPE ldbn-ldbnode
                              wa    TYPE spfli
                              evt   TYPE c
                              check TYPE c.
      CASE evt.
        WHEN 'G'.
          WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
          ULINE.
        WHEN 'L'.
          ULINE.
      ENDCASE.
    ENDFORM.
    FORM callback_sflight USING name  TYPE ldbn-ldbnode
                                wa    TYPE sflight
                                evt   TYPE c
                                check TYPE c.
      WRITE: / wa-fldate, wa-seatsocc, wa-seatsmax.
    ENDFORM.</b>

  • Logical database : user defined selection screen

    Hi Experts,
                 I am working with HR-ABAP. The logical databases provide a selection screen......but i want to use a selection screen of my own and not that of the LDB.
    Plz help...............

    hi do like this....
    go to attributes-->hr report catagory-->master data...here use the value _____000(5underscores and 000 )..
    you wii get that..
    regards,
    venkat

  • TO HAVE USER DEFINED SELECTION SCREEN USING LOGICAL DATABASE AFI

    AFI is the logical database i need to use, but if i include the AFI is the program attributes, i get the selection screen which is already there for AFI, but i need to get the selection screen, that i have defined

    Hi ,
    you can exclude sel. from ldb with
    loop at screen - statement
    and you can include your own sel-option and parameters
    regards Andreas

  • User Exit to add user-defined selection critieria onto VL10G

    Does anyone know how to add user-defined selection criteria onto <b>VL10G</b> - Sales and purchase order display screen? OSS note <b>524424</b> states the userexit to transfer user-defined selection criteria from the selection screen to the report but no information on how to add the selection criteria on the screen. Is that something can be done through configuration or user-exit?
    Any advice or sample is greatly appreciated.

    I was in a hurry, I forgot to add, the user role specific selection screen assignment to VL10G is done at "delivery scenario" level
    The delivery scenarios that are predefined in the system can be found under Logistics Execution -> Outbound Process -> Goods Issue for Outbound Delivery -> Outbound Delivery -> Create -> Collective Processing of Documents for Shipment.
    You can make the following settings in a delivery scenario:
    <b>Selection screen</b>
    You can use the selection screen parameters to define the appearance of the selection screen used to select the delivery list.
    There are three combinations of selection parameters available that each include a different number of tabs.
    A long selection screen with no tabs
    A selection screen with three tabs
    A selection screen with six tabs
    The selection criteria is the same on all three screens in the standard system, it is simply arranged differently.
    This parameter also triggers scheduling of the report for processing the delivery list, with the same three available tab options.
    Customer enhancements are also possible in the LV50R_PREFZ1 program, which should be triggered from a delivery scenario.
    <b>User role</b>
    In the standard system, a predefined user role is assigned to each delivery scenario. If necessary, you can copy these user roles into your own user roles, make changes as required, and then assign them to a delivery scenario of your choice.
    If the user role assignment for a delivery scenario is changed in Customizing, the new settings are valid for all users that carry out this delivery scenario.

  • User-defined selection list support in HA Release 6.5

    Dear all, As in Hyperion Wired for OLAP v4.1.2 and Hyperion Analyzer Release 5.0.3, it can allow users to create user-defined selection list for a dimension under "Advanced" option of Cube Navigator, is there the same function in Hyperion Analyzer Release 6.5? If no, is there any turnaround or alternative?Thanks for your help.Regards, Zero

    Hello,
    You must have defined user command for the radio button. This is not required. Just try putting it in at selection screen. AT SELECTION-SCREEN ON RADIOBUTTON GROUP rgp1.
    the moment the user clicks the radio button it will go to this event and call the screen. Just use AT SELECTION-SCREEN.
    Regards,
    Shekhar Kulkarni

  • Create a user-defined selection variant in transaction ME21N

    Hi,
    In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
    Any help would certainly be appreciated.
    Thanks,
    Alam.

    I would suggest that you replay the transaction with breaks, so that you can see exactly what is happening (in the start options, set the SAPGUI replay options to stop at each ProcessedScreen)
    It may be that the Selection Variant button is not present during replay. In this case, you would need to make the step where this button is pressed as optional.
    ME21N is a difficult transaction to automate because it always remembers what you were last doing in it and restarts the transaction from that point.  You can delete the user settings (so you always start the transaction as though for the first time) using the following code in your script:
    ABAP.
    * Delete all User-Settings in MM
      DELETE FROM ESDUS WHERE UNAME = SY-UNAME.
    * Delete all User-Settings in search help
      DELETE FROM DDSHDEFSH WHERE USERNAME = SY-UNAME.
    ENDABAP.

  • Can we Customize Edit User-Defined Table Screen in Fusion Application

    Hi All,
    We have a requirement to add a ADFDI functionality to the 'Edit USer-Defined Table' screen by adding a 'Mass Upload' Button.
    Normally for Some of the screens (Fusion Compensation) i am seeing 'Personalize -> Edit Current Page' Option on Menu items on top. But on 'Edit User-Defined Table' i am not seeing this option in 'Personalize' Menu.
    So the questions is is this screen Customizable in Fusion Application? If So What will be EAR file which we need to use for Customization.
    The screen where we need to add ADFDI Functionality is under 'oracle/apps/setup' path.
    Can anyone point me to the Exact EAR on this and also let me know if we can customize it or not
    Thanks
    Kaja

    Generally the code structure can be observed run-time [url https://blogs.oracle.com/fadevrel/entry/finding_code_artifacts_for_customization]using the composer, however in your case the content comes through a portlet in which case the method does not work as you cannot drill down to the specific region details in the composer. Based on a search through the code I think the regions you are interested are:
    <li>hcmPayroll/userTables/ui/public_html/oracle/apps/hcm/userTables/ui/page/UserTableSearch.jsff --> This is the details page with header "Manage User-Defined Tables"
    <li>hcmPayroll/userTables/ui/public_html/oracle/apps/hcm/userTables/ui/page/ManageUserStructure.jsff --> This is the details page with header "User-Defined Table: <TABLE_NAME>"
    These would presumably be in EarHcmPayroll. I'll see if I can find out how the portlet content can be observed from the RT application..
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • How to restrict user at selection screen while executing in background mode

    hi all,
    how to restrict user at selection screen while executing in background mode
    Regards
    Deepak

    Hi,
    We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
    so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
    Regards
    Sudheer

  • Creating a User-defined Selection variant for Transaction ME21N

    Hi,
    In transaction ME21N with the 'Document Overview' feature turned on we can view a list of standard selection variants. I would like to add a user-defined selection variant to that list. There is an OSS Note 377180 present which describes how to do that but(as per transaction SNOTE) that note cannot be implemented in our system. Is there any other way to get that done?
    Any help would certainly be appreciated.
    Thanks,
    Alam.

    So I am having a similar issue. I have a fixed length flat file with 3 different record types.
    1 a header ( length is 82 bytes with the first byte set to H ( single record always the first )
    2 a detail record ( length is 382 bytes ) with the first byte set to D ( multiple records )
    3 a trailer record ( length is 82 bytes ) with the first byte set to T ( single record always the last )
    I created a UD OTD with 3 elements for each record type, RECORD_TYPE is the first field 1 byte. Matching for each on either H,D, or T. When I try and test the OTD with the Run Test button I get an unmarshal error
    <SOD>""<POS>"HACCUMULAT..." failed input match, Fog#431, after <no path>: failed node: trailing junk in fixed/parent
    HACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 0 0
    D ar3531 ar3531 ar3531 ar3531000 55887027260 30.000 30 5098765 20080804 000T114 120080806 82820P30000001024511 25.00 0.00 25.00 0.00 25.00 25.00 0.00 0.00 0.00 0.00 0.00T
    TACCUMULATED BENEFIT TRANSACTION FILE 20080801 20080825 2894 0 0
    Not sure whats going on, so if anyone has any suggestions on where to look that would be great
    Thanks

  • Define selection screen for ldb_process

    Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
    I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
    The question is:
    How can i define the selection screen 903 using the call function ldb_proces?
    Thanks
    Pablo Santos

    Hi,
    You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
    Cheers.

Maybe you are looking for

  • I need help with math script

    here's what i want to do. chart looks like this: number 1 -/+ number 2 number 3 number 4 total if '+' sign or no sign is used in the space for it, number1 + number2 + number3 + number4 = total if '-' sign is used, then number1 - number2 + number3 + n

  • Unable to transfer Kindle files onto my Ipod Touch

    The files are in my Kindle on my computer but they will not transfer over to the Ipod Touch.  How do I get the files moved over to the Ipod Touch from my pc?

  • Scripts have vanished from Scripts window

    At work I have CS 3. This morning, I opened the Scripts window to run a script & nothing was there, not even the samples. I opened the relevant folders, and yes, the scripts were there. Rebooting didn't help. Could the actual listing of the scripts w

  • Suppress Message in Funtion Module Call

    Hello I'm using FM 'L_TO_CREATE_MOVE_SU' in an RF program which works great.  But gives me a message "Transfer Order 0000001935 Created".  Is there a way to suppress this message?  This message appears on a seperate screen because it is on an RF Devi

  • ADP and Ceridian Interfaces

    I am looking for documentation on the ADP and Ceridian interfaces from Oracle. I have seen several references to this offering from Oracle but have seen no documentation on what and where these are. Can someone point me in the right direction? Thanks