User exit for controling header and item division
Hi all,
Currently there is restriction in sales document for header division and item division i.e. if header division is 10 then it is not accepting the products of division 20, 30, 40, 50 at item level.
If the restriction is removed then it will allow products of all division in a sales document irrespective of header division (if the customer is extended for all the sales area).
But we would like to allow products of division 10, 20 and 30 in one sales document if header division is 10 or 20 or 30.
How can it possible? Can it be possible through user exit? Any standard user exit is available or we would have to develop one?
Please guide me how to go about.
Regards
Rajesh T.
Thanks Navaneetha Krishnan,
1. Please give some more inputs on Cross Division,
2. To enable to incorporate other division than header at a item level is ok, but restriction on some division at item level is what i want to know, weather through user exit and which user exit? or I will have to create user define User Exit?
e.g. customer 1234 is created for all the sales area
Sales areas are : 1000 10 10
1000 10 20
1000 10 30
1000 10 40
1000 10 50
now in ZOR Sales document(where there is no restriction of item division) if I enter sales area 1000 10 10 at header it will allow the product of all division.
but i want if i put at header 1000 10 10 then it should allow the products of division 10 and 20 only and not to allow products of divsion 30,40,50 in one sales document
similar if i put sales area 1000 10 30 at header level it should allow me to enter products of division 30,40,50 and should not allow products 10, 20 in one sales docuemnt
I think this is more clear. request you all to provide details ASAP
regards
Rajesh T.
Similar Messages
-
User exit for change PO (me22n) for save header and item text.
Hi Experts,
I have a requirement to read the header texts/item text at run time .
please tell me is there any save user exit for tc me22n .
Thanks in Advance.
PareshTransaction Code - ME21N Create Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
User-exit for deletion of line item in PO
hi group
i want to delete a line item of purchase order.
and after that i have to make some changes
so i want to know which user-exit will be used here.
please help its urgent.Hi,
Please fine the list of user exits for the transaction ME22.
If it serves your purpsoe , please close the thread and reward suitable points.
Regards,
Irfan Hussain
Transaction Code - ME22 Change Purchase Order
Exit Name
Description
AMPL0001
User subscreen for additional data on AMPL
LMEDR001
Enhancements to print program
LMELA002
Adopt batch no. from shipping notification when posting a GR
LMELA010
Inbound shipping notification: Transfer item data from IDOC
LMEQR001
User exit for source determination
M06B0001
Role determination for purchase requisition release
M06B0002
Changes to comm. structure for purchase requisition release
M06B0003
Number range and document number
M06B0004
Number range and document number
M06B0005
Changes to comm. structure for overall release of requisn.
M06E0004
Changes to communication structure for release purch. doc.
M06E0005
Role determination for release of purchasing documents
ME590001
Grouping of requsitions for PO split in ME59
MEETA001
Define schedule line type (backlog, immed. req., preview)
MEFLD004
Determine earliest delivery date f. check w. GR (only PO)
MELAB001
Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001
WE default quantity calc. and over/ underdelivery tolerance
MM06E001
User exits for EDI inbound and outbound purchasing documents
MM06E003
Number range and document number
MM06E004
Control import data screens in purchase order
MM06E005
Customer fields in purchasing document
MM06E007
Change document for requisitions upon conversion into PO
MM06E008
Monitoring of contr. target value in case of release orders
MM06E009
Relevant texts for "Texts exist" indicator
MM06E010
Field selection for vendor address
MMAL0001
ALE source list distribution: Outbound processing
MMAL0002
ALE source list distribution: Inbound processing
MMAL0003
ALE purcasing info record distribution: Outbound processing
MMAL0004
ALE purchasing info record distribution: Inbound processing
MMDA0001
Default delivery addresses
MMFAB001
User exit for generation of release order
LWSUS001
Customer-Specific Supply Source Determination in Retail
MRFLB001
Control Items in Release Creation
No of Exits: 33 -
User exit for tcode ME21N and ME22N
Hi everyone
Can anybody tell me the user exits found in the tcodes ME21N nad ME22N, when saving a PO?
Regards
AnjaliAMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Individual customer source determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MM06E011 Activate PReq Block
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
If useful reward.
Vasanth -
Extended Idoc - User exit for delivery VL01 and Invoice VF01
Hi Experts,
We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.HI
exits available for VL01.
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
V53W0001 User exits for creating picking waves
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53C0001 Rough workload calculation in time per item
V50S0001 User Exits for Delivery Processing
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50R0002 Collective processing for delivery creation
V50R0001 Collective processing for delivery creation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT Delivery: Item Status Calculation
V02V0004 User Exit for Staging Area Determination (Item)
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0002 User exit for storage location determination
V02V0001 Sales area determination for stock transport order
For VF01..
Enhancement
V61A0001 Customer enhancement: Pricing
V60P0001 Data provision for additional fields for display in lists
V60A0001 Customer functions in the billing document
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V05I0001 User exits for billing index
SDVFX011 Userexit for the komkcv- and kompcv-structures
SDVFX010 User exit item table for the customer lines
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX001 User exit header line in delivery to accounting
J_3RSINV -
User Exit for Purchase Order Line Items.
I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.
Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM
-
Valid to date for BOM Header and Item
Hello everyone,
I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
Any help will be highly appreciated.
Thanks in advance!
Regards,
AnujHi Anuj
In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
And also ref the link
Problem finding Valid To Date or Change number to on BOM
pavan -
User Status update on Header and Item in Sales Order
Hi,
I need to update the user status in both the header and Item based on some conditions. I checked the user exit's under 'MV45AFZZ' but no use.
Could any one please provide me where I can write the code to upate user status in header and Item.
Thanks
Srihari.
Edited by: SrihariKonduru on Dec 23, 2009 4:21 PMHi,
Thanks for quick reply.
But I think this will be updated the satus using a report program. But in my case if the user creates a sales order or he is in change mode based on the selection of Distribution channels and Dunning key's I need to update the satus.
For this I need a exit to write the code. And also I required sample code snippet to update the status in user exit. If that availble it will be great help to me.
Thanks
Srihari. -
PPCO0007 User Exit for Changing Header Fields During Order (CO40)
.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí HuertaHi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record. -
User Exit For PR Create and Change
Hi,
Please help me for finding User Exit while creating Purchase Requisiton(Me51/Me51n) and aslo changing Purchase Requisiton(Me52/Me52n).
Mainly i want to exit for validating Plant and material code while creating and changing PR.
Thanks,
Sunil sahooHi,
Use the exists
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
Regards,
Nandha -
Help Needed: User exit for transaction IL01 and IL02
Hi,
First of all I would like to take you through my requirement. The
requirement is: When I try to instal an equipment(EQ) at a functional
location(FL) in SAP, I want to pass on the values of these two
technical objects(EQ,FL) to an external system through SAP XI.
I identified two user-exits for this purpose,
they are ILOM0001 and ILOM0002. I found the first exit (ILOM0001) more
relevant than the other as the exit ILOM0001 is responsible
for 'Additional checks before saving a functional location'. The
function exit for the exit ILOM0001 IS EXIT_SAPMILO0_001.
When I load the transaction IL02 and try to instal an equipment at a
functional location in debug mode nowhere did I notice this function exit.
Please clarify whether this exit is called with a different name
internally or I am looking at a different exit altogether.
Your early response is highly appreciated.
Thanks,
VijaySolved..........
-
Which BAPI is for reading Header and Item for BOM.
Hi All,
I am using BAPI named 'CSAP_MAT_BOM_READ' to read Material type BOM header and Item.
1. Is there any BAPI available to read Equipment Header and Item ?
2. Is there any BAPI available to read Functional Loc Header and Item ?
3. Any BAPI to Write into Database table from my internal table (Header and Item) ?
Edited by: amit soni on Aug 26, 2011 11:25 AM1. BAPI_EQUI_GETDETAIL
2. BAPI_FUNCLOC_GETDETAIL
3. BAPI_EQUI_CREATE, BAPI_FUNCLOC_CREATE for equipment, and functional location respectively.
Have you browse in BAPI transactions? -
User exit for split of PO items
Hi all.
In the creation of purchase orders from SRM shopping carts, we have a requirement to split the service purchase order lines in different items when the tax code in SRM is different. I mean, the requirement is to have only services with the same tax code in SRM in the same PO item. If the SRM tax code is different for a concrete service I have to split it in another PO item.
In short, what I need is to know any user exit, badi, etc... in the creation of PO for the splitting of PO items. Can anyone of you help me?
Thanks in advance.Hello Manosij.
I have not much experience in SRM. I think that the difference between scenarios is where the subsequent documents of a shopping cart are created, is that right? In my case, the PO is created in the backend, in R/3.
In the shopping cart (in SRM) the services are created everyone in a different SC item, with the possibility of having different tax codes for each one. However, in the purchase order (in R/3), the services are grouped all together in a unique PO item, all of them under a unique tax code (EKPO-MWSKZ). What I need to do is to have a PO item for each different tax code from the SC. The services have to be under their correspondent tax code in the PO.
For example, I am creating a SC with two services, one of them with tax code VP and the other one with tax code V5. The PO must have two items, one with tax code VP and the other one with tax code V5. Currently, the PO is being created with a unique item with tax code VP. If both items in the SC would have tax code VP, it would be correct to have the PO with a unique item with tax code VP.
I hope this clarify my requirement.
Thanks. -
User-Exit for Checking Customer and Sale order type in Sales Order Creation
Hi Experts,
While creating the Sales Order once i enter sold-to-party and enter line item, i have to check the customer against the sales order type.
Please suggest me if any user-exit or enhancement or BADI available for it.
Thanks & Regards,
-VMHi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
mark if helpful
Regs,
Tushar Mundlik -
User exit for order operation and internal assignment (SAPLCY18)
Dear all,
I am currently facing the problem below, which I have posted in PLM forum. However, I have been advised to ask in EAM forum, since probably my problem is more EAM-related.
The problem currently facing is related to PM order operations. The customer's requirement is to use operations and to include the personnel numbers involved. For this solution, our proposal is to have the operations and within internal operation data to use the tab requirement assignments in order to include the personnel numbers. Also at this level, the client expects to maintain the the 'hr' (work requirements) for each personnel. For example there are used 2 personnel ids with hr requirements of 2hrs and 3 hrs respectively. Let me mention that in the operation screen, the hr requirements are initially defined equal to 1 hr.
In the above case the message "The work of all the splits is greater than the work in the operation" apperas, since 1hr 5hrs. The question is if there is any way (user exit, badi) to update the work requirements in the operation with the sum of the internal assignment data.
Program SAPLCY18 may be help, although I have not found the work around.
More explanatory details to help:
The combination using Work-Number of capacities-Duration and the Calculation key is already used, however the requirement is to use specific personnel numbers. SAP, as far as I am aware, allows you to define personnel numbers within internal operations.
TAB Requirements assignements is available as long as in the operations main tab you have completed for the selected line the values Work-Number of capacities-Duration and Calculation key. Thus, in TAB Requirements assignments you can input the personnel numbers and the work of each one.
The question is if we can use the Requirements Assignments TAB, using the button internal in the operations tab in order to define the personnels involveld and according to the work (hrs) to update the respective field of the operation (otherwise let's say to update the duration field for each personnel id and automatically the operation respective duration field to be updated).
Your feedback is highly appreciated,
thank you in advance,
Bou.LisPeteA,
thank you for your response. I am actually looking for such a development solution (more-or-less I know that it is not possible using standard SAP customizing) but unfortunately I have not yet found such a user exit or BADI that could help solving the problem facing.
Do you have any idea of such a development tool to use?
Thansk and regards,
Bou.Lis
Maybe you are looking for
-
Do I need to return my mac.
I purchased some DVDs on the web for backing up photos and had no end of trouble with them. Basically sometimes they would not be recognised (Literly when you put them in the drive the mac would not see them) Some times it would but the burn would al
-
Hi, I'm running CF 7.0.2. The app is using Flash forms. I have this onError function in my Application.cfc. <cffunction name="onError"> <cfargument name="Except" required="yes"> <cfargument name="EventName" type="string" required="yes"> <cflog file="
-
I cant play my music in my car. I have a 2011 camry with a usb port.
my ipod still works fine, my iphone 5 keeps saying its incompatible. anyone have a solution???
-
How to shutdown the PC using Lab View
Hi, We are doing UPS project. In this project we have to shutdown the PC if there is a battery low condition. I want to know whether is their any library function in Lab View to shutdown the PC. And also we want make this labview to run in background
-
How to create Scrollable tables in ADF?
Hi all, For the above I tried to use the solution as suggested by Frank Nimphus in the url *"http://thepeninsulasedge.com/frank_nimphius/2007/11/08/adf-faces-embedded-and-scrollable-tables/"*. However my problem was not solved and I did not get any s