User exit for Purchase order & Purchase requisition.

Hi,
  I need the user exits/BADIs/BTE in the following events.
       1)  Just before saving Purchase requisitions and After saving purchase req ( Create and Change)
      2)  Just before saving Purchase Order and After saving purchase Order   ( Create and Change)
Regards,
Ganesh Nama.

Hi Experts,
I want to change delivery date in PR while creating purchase requisition ME51n.
Means need to add 7 days in delivry date field when ever it is todays date (sy-datum).
Please suggest suitable badi or EXIT.
I tried in BADI..ME_PROCESS_REQ_CUST... in PROCESS_ITEM methode
data : preqdata type mereq_item,
          v_lfdat    type  sy-datum.
          prereq_x   type   mereq_itemx.
    preqdata = im_item->get_data( ).
if preqdata-lfdat = sy-datum.
  prereq_x-lfdat = 'X'.
  call function 'CALCULATE_DATE'
   exporting
     days              = '7'
     months            = '0'
     start_date        = sy-datum
   importing
     result_date       = v_lfdat            .
  preqdata-lfdat = v_lfdat.
  call method im_item->set_datax( prereq_x ).
  call method im_item->set_data( preqdata ).
endif.
But systems is ignoring thi change and again coming in same badi ..so in loop.
Please tel any other way to make change is delivery date field.
Thank you.....!!!!
Nilesh.

Similar Messages

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • User exit for Production Order status

    Hi all ,
    Pl tell me about the : user exit for Production Order status
    ( i want CLSD status after settlement of the Production order .)
    regards,

    Hi,
    for production order you have exits PPCO0001 - PPCO0023. In transaction SMOD you can see the documentation for all this exits. Actually I think exit PPCO0007 could be a possiblity for you. This exit is called by saving the order.
    But maybe it would be better for you to use a special status profile? A user status is set if settlement status is set.
    Also BADI WORKORDER_UPDATE could be interessting for you.
    Regards,
    Sabine

  • User exit for process order & PO

    Hello Team,
    There is a requirement as follows:-
    When a  process order is created for a material that is valuation type managed, the valuation type entered (or automatically populated) requires verification against the valuation type in the procurement alternative.   If the valuation type does not agree with the valuation type in the procurement alternative, an error message should be given to the user "invalid valuation type".
    When a purchase order is created for a material that is valuation type managed, and the batch is entered in the PO line item, the valuation type entered (or automatically populated) must be the same as the valuation type in the batch master.
    We are currently on 4.7 version and would appreciate if anyone could suggest a BADI/User-Exit for these scenarios.
    Regards
    Ravi...

    HI, Try this use r exits
          EXIT_SAPMM06E_013   *or*
          EXIT_SAPMM06E_012
    regards,
    koolspy.

  • User exits for Sales Order Data

    Hi,
    May i ask if there's any user exit that will get data from Sales order like ex. the order qty and the net price and pass to SHP_OBDLV_SAVE_REPLICA like ex in the segment  E1BPOBDLVITEMRFO of delivery note.
    or get the commodity code (STAWN) from MatMas and pass also to SHP_OBDLV_SAVE_REPLiCA
    Thanks in advance..
    aileen

    These are the user exits for VA01
    V45E0001 Update the purchase order from the sales order
    V45S0001 Update sales document from configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    Use this also USEREXIT_SAVE_DOCUMENT
    Regards,
    Shamma

  • User exit for Production Order release

    Hi Experts,
    Any User eixt for Prouction Order Mass processing.
    Before releasing the production order i have to do some checks. Can you please provide right user exit. More reward points with best solutions.
    Thanks
    Cris

    Hi,
              check the following userexits and BADI's for Production Order
    Enhancement/ Business Add-in Description
    Enhancement
    PPCO0010 Enhancement in make-to-order production - Unit of measure
    PPCO0012 Production Order: Display/Change Order Header Data
    PPCO0013 Change priorities of selection crit. for batch determinati
    PPCO0015 Additional check for document links from BOMs
    PPCO0016 Additional check for document links from master data
    PPCO0017 Additional check for online processing of document links
    PPCO0018 Check for changes to production order header
    PPCO0019 Checks for changes to order operations
    PPCO0021 Release Control for Automatic Batch Determination
    PPCO0022 Determination of Production Memo
    PPCO0023 Checks Changes to Order Components
    STATTEXT Modification exit for formatting status text lines
    PPCO0009 Enhancement in goods movements for prod. process order
    CCOWB001 Customer exit for modifying menu entries
    COIB0001 Customer Exit for As-Built Assignment Tool
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    PPCO0001 Application development: PP orders
    PPCO0002 Check exit for setting delete mark / deletion indicator
    PPCO0003 Check exit for order changes from sales order
    PPCO0004 Sort and processing exit: Mass processing orders
    PPCO0005 Storage location/backflushing when order is created
    PPCO0006 Enhancement to specify defaults for fields in order header
    PPCO0007 Exit when saving production order
    PPCO0008 Enhancement in the adding and changing of components
    Business Add-in
    AFABD_CHANGE Change Relationship
    CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection
    PPPI_SEL_ORD_EXT_REL
    SIDAT_UPDATE Change date of price simulation
    Regards

  • User exits for sales order

    Dear all SAP experts,
    How to find out the user exits for sales document type? Especially the user exits which are called when we save the sales order.
    With best regards,
    Allabaqsh G. Patil

    Hi,
    Also there is user exit to refresh data
    USEREXIT_REFRESH_DOCUMENT
           It is always necessary to refresh user-specific data before   *
          the next document will be processed.                          *
          This can be done in this userexit.                            *
          This userexit can be used to refresh user-specific data       *
          when the processing of a sales document is finished           *
          - after the document is saved                                 *
          - when you leave the document processing with F3 or F15       *
          It may be necessary to refresh user-specific data before      *
          the next document will be processed.                          *

  • User exit for sale order material serial number change

    I am looking for User exit for changing the serial number for the saleorder material va01.

    Hey,
      Check the include program : MV45AFZZ. it will trigger at the of saving the sale order.
    IF SY-TCODE EQ 'VA02' OR SY-TCODE EQ 'VA01'.
    Endif.
    Note : Write your coding inside the IF clause to avoid affecting the other transaction codes.
    Regards,
    Saravanan M

  • Field Exit or User Exit for Maintenance Order field.

    Dear All,
    we need an field exit or an user exit for order(AUFNR)field in PM module.
    The Client wants that the value of this field should be validated and for certaion condition an error message should be given while saving an invoice for this order.
    Kindly provide the user exit ..
    Its urgent.
    Thansk in advance ..
    regards
    Ajay.

    Implement Field Exit within program   
    For this example I am using dta element 'EBELN' from table EKKO.                   
    Step 1: Execute program 'RSMODPRF', entering the data element of the field
    Step 2:Create function module when prompted, and add you code to the source section using the parameter 'INPUT' as the field value you are checking
    Step 3:      Save and activate Function and execute transaction 'CMOD'.
    Step 4:      Choose option: Goto-> Text Enhancements->Data elements->New DE cust docu.
    Step 3:      Save and activate Function and execute transaction 'CMOD'.
    Step 4:      Choose option: Goto-> Text Enhancements->Data elements->New DE cust docu.
    Step 5:      Enter data element
    Step 6:      Save and activate
    Step 7: Execute program 'RSMODPRF' again but this time leave data element field blank. Step 8: Select the checkbox for the data element you have just created and choose option: Field exit->Activate This will now be active for all instances of this data element, but you can assign specific program and screen combinations by pressing the 'Assign prog./screen' button. You can also change the code you entered in the field exit function module by pressing the 'Edit FM' button.
    regards
    vinod

  • User Exit for Maintenance Order(IW31)

    Dear All
    While Creating Maintenance Order , (IW31) ,,,   It is taking the cost center from the Equipment  Master  , But  my client doesn't want this . I need a user exit for this .
    How to solve this ?
    I have tried with the exits find inSDN , bcoz cost center filed is not in the exporting parameter of the function module.
    Kind Regards
    Karthikeyan.P

    hi karthick ,
    yes it cost center is picked from eqpt master record and it is use for creation of a default settlement rule in IW31 ... if u dont want that then just dont maintain cost center in eqpt master record and if ur requirement is to have default settlement rule for order type then user [ IWO10027 ] User exit: Generate user-defined settlement rule ...
    regrds
    pushpa

  • User Exit For Production Order Confirmation Using CO15 or COGI

    Hi all,
    I need user exit for the production order confirmation so that i can set
    AFPO-ELIKZ and AUFM-ELIKZ (delivery completedu2019 status flag) to Blank......
    Thanks

    hi,
    check these exits.
    CONFPP01                                PP order conf.: Determine customer specific default values
    CONFPP02                                PP order conf.: Customer specific input checks 1
    CONFPP03                                PP order conf.: Cust. specific check after op. selection
    CONFPP04                                PP order conf.: Customer specific input checks 2
    CONFPP05                                PP order conf.: Customer specific enhancements when saving
    CONFPP06                                PP Order Confirmations: Actual Data Transfer
    CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
    CONFPS01                                PS confirmation: Determine customer specific default values
    CONFPS02                                PS confirmation: Customer specific input checks 1
    CONFPS03                                PS confirmation: Customer specific check after op. selection
    CONFPS04                                PS confirmation: Customer specific input checks 2
    CONFPS05                                PS confirmation: Customer specific enhancements when saving
    CONF0001                                Enhancements in order confirmation
    CONFPI01                                Process order conf.: Calculate cust.specific default values
    CONFPI02                                Process order confirmation: Customer spec. input checks 1
    CONFPI03                                Process order conf.: Cust. spec. check after op. selection
    CONFPI04                                Process order conf.: Customer specific input checks 2
    CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
    CONFPI06                                Process order confirmation: Actual data transfer
    CONFPM01                                PM/SM order conf.: Determine cust. specific default values
    CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
    CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
    CONFPM04                                PM/SM order conf.: Customer specific input check 2
    CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
    use the exit which contains both structures AFPO,AUFM.

  • User exit for process order

    Hi experts,
    I need user exit for a process order (COR1). While saving the process order batch number has to generate based on the production version.
    I used the exit PPCO0007, but its not working. Is there any other exit available r not?
    Can u tell me exit name at process order creation?
    Naren

    Thanks for your reply.
    I maintained Production scheduling profile in workscheduling view. The number range i used in the user exit is not generating at the time of release. Is there any other user exit is available for process order.
    Yesterday i got another problem. While releasing the process order it is giving a message as release rejected. I went to the log details. In that no batch could be determined message came. I deactivated the user exit and tried. The std number range also it is not taking. I went to goods receipt tab and click on the batch creation button. There also it is giving message as no batch could be determined. How to resolve it. I checked everything in material master and as well as settings. I didint get the solution.
    Please help me.
    Naren

  • User exit for Production order confirmation during goodsmovement

    Hi Guru's
    Am in need to find the user exit for Equipment master creation. Equipmentmaster will be created when the goods movement 101 happens.  can someone help me out to find the user exits. thanks

    Hi,
    Ok thanks for that.For Co11n please find the user exits below.But i am not sure which will suit your requirment.Please let me know for any further help.
    CONF0001  Enhancements in order confirmation
    CONFPI01  Process order conf.: Calculate cust.specific default va
    CONFPI02  Process order confirmation: Customer spec. input checks
    CONFPI03  Process order conf.: Cust. spec. check after op. select
    CONFPI04  Process order conf.: Customer specific input checks 2
    CONFPI05  Process order conf.: Cust. spec. enhancements when savi
    CONFPI06  Process order confirmation: Actual data transfer
    CONFPM01  PM/SM order conf.: Determine cust. specific default val
    CONFPM02  PM/SM order confirmation: Customer specific input check
    CONFPM03  PM/SM order conf.: Cust. spec. check after op. selectio
    CONFPM04  PM/SM order conf.: Customer specific input check 2
    CONFPM05  PM/SM order conf.: Cust. specific enhancements when sav
    CONFPP01  PP order conf.: Determine customer specific default val
    CONFPP02  PP order conf.: Customer specific input checks 1
    CONFPP03  PP order conf.: Cust. specific check after op. selectio
    CONFPP04  PP order conf.: Customer specific input checks 2
    CONFPP05  PP order conf.: Customer specific enhancements when sav
    CONFPP06  PP Order Confirmations: Actual Data Transfer
    CONFPP07  Single Screen Entry: Inclusion of User-Defined Subscree
    CONFPS01  PS confirmation: Determine customer specific default va
    CONFPS02  PS confirmation: Customer specific input checks 1
    CONFPS03  PS confirmation: Customer specific check after op. sele
    CONFPS04  PS confirmation: Customer specific input checks 2
    CONFPS05  PS confirmation: Customer specific enhancements when sa
    Thanks,

  • User exit for Service order release ( needed operation details as import )

    Hi All,
       I need a user-exit while service order release( tcode : IW31 ) activity . I find some of the exits, but none of those not having "Operation" details , all are having only header details. Please suggest if any user-exit is available for this or BADI . I tried with badi "ALM_ME_001_ORDER" , its not triggering at all while creation of service order.
       Is there any way we can get from operation data from buffer, please suggest me the same.
    Thanks in advance,
    Pavan.

    Hi Thomas,
       Thanks for reply. I saw the function exit which you mentioned , but it didn't have the operation details in import.
    Regards,
    Pavan

  • User Exit for me54n on purchase Requisition Release i.e EXIT_SAPLMEREQ_05

    HI   All Experts ,
                          I have one Requirement that  , i want to insert  data in Ztable  using all details from header data in me54n  on purchase release i.e When i will Click on Purchase release Requisition i want to insert records using few fields such as , matnr ,menge , item, quantity ,requisioner,plant storage locaton , date etc  . i am using user exit on this i.e smod EXIT_SAPLMEREQ_005 in mereq001  which is called when clicked on purchase requisition release , now how to collect that details  in this user exit .
    need some help regarding this .
    Thanks And Regards
    Deepak Dhamat

    Dear Peter ,
                   yes you are correct that ebeln is part of structure MEREQ_ITEM but  it is always empty .i want Purchase Requisition no i.e     PR. Manual           2000009940  which is present in me54n first line of screen  i.e above the header note .
    after looking at the property  of that field it show as given
      below
      Struct.          MEREQ_TOPLINE               
      Field name       BANFN_EXT                   
      Data element     BANFN                       
      DE supplement    0                           
      Parameter ID     BAN                                                                               
    Screen field     MEREQ_TOPLINE-BANFN_EXT     
      Program name     SAPLMEGUI                   
      Screen no.       0014

  • User Exit for ME52N with Purchase Requisition number & line item number

    Does anyone know which user exit I could use to get at the purchase requisition number and line item number when I am trying to change a PR.  I see various exits with im_req_item but when I code a popup in the include it is not appearing.  I am just not finding the right exit.

    You can use enhancement MEREQ001, function exit EXIT_SAPLMEREQ_005. This enhancement description gives impression that it can only be used if you have custom fields but it can be used even when you don't have custom fields.

Maybe you are looking for


HashFlare