User Experience with CS/CS2 fonts and font management

Im just ordered a 2.0MBP and am wondering about other user's experience with the MBP and CS or CS2 running in Rosetta as well as font management. I know there are lots of post about Adobe and Rosetta, but no cohesive forums describing what most user's experiences have been- both good and bad.
I plan on running CS (all apps except Version Cue) as i will wait for CS3 and skip over CS2. For fonts im currently running FontExplorer X and plan on continuing.
Id love to hear what Adobe software is working well (or not), what font management you are using and what system.
15inch G4Ti-Book, G5 Quad, MBP 2.0 (ordered) Mac OS X (10.4.5)

So im curious, out of these applications i have installed will any of them install anything into the MacHD>Users>Applenewton>Library>Fonts Folder?
I have installed:
Adobe CS2
Macromedia Studio 8
Microsoft Office 2004
iknow those apps have their own fonts they use to work with their programs
i just want to know what would be safe to move around or remove period from my user font library.
i dont mean to sound redundant but i spaced out/forgot how i originally organized my fonts i know i added certain fonts to my font folder in my user's library font folder but cant recall if i added arial/verdana and some other fonts.
is there to check what apps depend on them or what?
thanks in advanced!

Similar Messages

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Any experience with tep pocket WiFi and skype while traveling

Anyone had any experience with tep pocket WiFi and skype while traveling. Seems like a good solution in the UK

Did you ever get an answer to this or take the plunge? I'm curious what you found out...

Any experience with Illustrator CS2 and MBP?

Hi Everyone!
I read a lot about the performance of Photoshop CS2 with Rosetta, but I would like to know how the Illustrator CS2 works with the new MacBook Pro.
Thanks for your comments!
Gus

I work in prepress at a commercial printer. I have been testing out my MBP 1.8GHz with all CS1 and CS2 apps as well as Quark Xpress 6.5. I also only have 1GB of ram at the moment (second 1GB will arrive today). Anyway all the apps run slower than on my G5 Dual 1.8GHz. That may be due to the slower hard drive speed and lower amount of ram. Most apps take a little longer to launch, but once up and running perform just fine. Acrobat 6 and ID CS2 take the longest to launch. I haven't had any crashes or kernal panics with any of the apps. Quark also works well. Still a bit slow, but very fuctional once up and running. Also Citrix for Mac works as does ApogeeX client 1.27. Overall I have had a better experience with this machine than DC 2.0 GHZ G5. I had kernal panics from the beginning the MBP has had no problems so far. If you need to use a MBP fro serious design or prepress upgrade as much as possible. ie 7200RPM drive and 2GB of ram.

Missing on Users end: How to install Font Manager.IndesignPlugin. Indesign_CC

I installed Indesign CC on the admin side of my computer. It seems to open/work fine there but when i login as a user on the computer, it won't open Indesign because it claims it is missing the Font Manager.IndesignPlugin. It originally said it was also missing the Character Panel.IndesignPlugin but I copied and pasted it from the admin to user's plugin folders. That seemed to fix that issue. But, doign find/searchs of the file name on both the Admin side and users side, i I am unable to even find the plugin. Why is this happening and where can I find this?
So very frusturated. This is all after I've installed/uninstalled this 4 times already today because of other issues.
Thanks!

Can you show me where I can find the answer to this I am havng the same issue and I can't find where this discssion was moved to

Bad experience with Verizon Fios Internet and Customer Service

I had an extremely bad experience with Verizon Fios Internet service and I will never use Verizon again.
In August 2014, I called and installed the Verizon Fios Internet and phone bundle. I asked the customer agent several times if I will be charged anything before the installation of the Internet and phone service. She said, 'No, we will only start charging after the Internet and phone are installed at your apartment'. I went to the store and picked up the router and phone and installed it at home by myself. The router did not work. I called Tech support and they said it will take several days for another available agent to come and look into the issue. I decided to discontinue the service and closed the account that same night.
At the end of the month, I received a bill of $80 of activation fee for the internet service. Nothing was ever activated, my internet router did not work, and I got charged an activation fee for a service that I did not even start using. From August to December, I called customer service over 10 times and some of them said they will waive it while the others said it's a non-refundable activation fee. One lady said, 'Ma'am, the activation fee starts when you placed the order, the warehouse received it and packed the router in the boxes....' Isn't that ridiculous? If that's the case, please ask all your customer representative to say a clause before new customers open their account: Are you aware that you will be charged a non-refundable activation fee once you open the account regardless of whether or not you use the service or not.
So after 3 months (November 2014), I decided to get out of all these troubles and paid off my $80 activation fee. They put the bill in the collection agency and I called them and paid the overdue balance. Then in December 2014, I received a statement saying I have a $3.11 overdue balance. The collection agency told me that they will charge me for the whole activation fee and a $3 transaction fee for the transaction. So now Verizon came back and said I owed them the $3 because I paid the collection agency their transaction fee.
I am very disappointed and furious about the whole Verizon operating system. Charging a customer for an activation fee for a service s/he has not consumed or used does not make any business sense. In addition, they do not know how to coordinate with the collection agency on overdue bills. Give the customer a heads-up that they will be charged a transaction fee on top of the overdue balance, and that transaction fee does not count towards clearing the balance.
I have completely lost my confidence in Verizon albeit the many good feedback from my friends.

Hi crystallau52,
Sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

My new user experience with PP5.5 (not so great)

I just wrote up a very long post and I seem to have trouble posting it -- "Cannot post now" error, even though I can post in the testing forum. This is a short post to see if it works...

11. Once I had my clips laid down and the video synced up, I started to think about audio. I had 3 tracks of audio: a mono track from the G12, and Channel 1 and Channel 2 from the JVC, both of which were different mics. It turned out that we ended up using Channel 1 from the JVC everywhere, but that was partly because it was easier to do and I didn't know what I was doing. It appeared that there was no easy way to tell Premiere to seperate out the Ch1/Ch2 audio in the sequence where the clip was laid down, possibly because I had Captured clips with the wrong audio setting (I didn't specify multichannel -- was it an option?) Instead, I had to go the the Project Window, select the clip, and choose Clip > Audio Options > Breakout to Mono. Then that gave me a pair of independnt left/right clips with just a mono track, and I could lay those down the timeline, and sync them up manually with the existing video. This sync was easy since the left edges matched up 1:1, since of course the video and audio were recorded together by the same camera. Then I had to unlink the original ("stereo") tracks and delete them. Was there a better way?
12. The aforementioned Breakout to Mono function is hard to find! If you select a clip in the Project window, one of the choices in the context menu (rightclick) is Modify > Audio Channels. It looks like it might be the right thing but everything is grayed out and there's no way to convert stereo to mono. It's particularly confusing that there is a lot of overlap between that context menu and the menubar Clip menu, but not enough. It seems like there should either be complete overlap or almost no overlap. But the degree of partial overlap makes it hard to find things, and hard to remember which menu you found them in.
13. Having established four sequences, each with two video tracks and 1 audio track, it was time to do the multi-camera editing. I found the multi-camera documentation and the whole paradigm somewhat confusing. That is, it seems weird that I have to lay down both of my clips into a container sequence (as V1 and V2), and then place that container sequence into an overarching parent sequence in order to do multicamera editing. Am I missing something? Why the extra level of indirection? In addition to being a bit nonintuitive, when I have my final sequence, it means an extra level of double-clicking (except that doesn't always work, so sometimes going back to the project window to find the constituent sequence/clip).
14. In each of my lowest-level sequences (that contained the clips directly), I had marked In and Out points. I was surprised to find that that didn't seem to affect their placement in the container sequence or the multicam clip that contained that sequence. I figured I must have done something obviously wrong, so just ended up trimming those sequences in their parent sequences. This turned out to be error-prone (left some gaps), but it got the job done.
15. The process of multi-cam editing wasn't really smooth. The interface for recording multicam edits didn't seem very amenable to adjustment, and it seemed like hitting '1' or '2' on the keyboard obviated the need to press the Record button, but not always. And restarting playing/recording sometimes meant that a duplicate multi-cam edit was recorded, though sometimes multicam edits were lost. It was confusing, but functional.
16. Editing existing multicam edits in the timeline was awkard. I see now that probably I should have used the ripple edit tool or rolling edit tool to do those edits, instead of the default arrow tool. But messing with those tools somehow we managed to get some video/audio misalignments (or at least convinced ourselves that we did!) or loss of sync, so we paniced and restrited ourselves to the regular pointer/arrow tool.
17. The multicam documentation linked to prp2it_multicam.pdf, but those instructions from 2006 are marked as for Premiere Pro 2.0. I wasn't sure that they were safe to use in Premiere Pro CS5.5...
18. In the multicam monitor window, there was space for 4 cameras. But I only had two. No way to compress the window to only show 2 cameras? That seemed a bit wasteful of screen real estate.
19. Having done the rough multicamera edits and then gone back and tweaked them, we were then concerned about audio. Some of the clips had higher gain audio than others,so I wanted to do gain corrections, generally to an entire clip. The first approach we tried was opening an audio clip in the source browser and applying the Volume Level effects control. But this would only give a 6dB boost. Why?
20. Next, we discovered that we could select a clip in the Project browser and choose Clip > Audio Options > Audio Gain. Here it appeared that the clip gain could be arbitrarily changed. It would be nice to have an interface to see all the places that a clip or a sequence's audio gain could be adjusted, since having several places to check was a bit confusing. Also, Audio Gain has both a "Set Gain" and and "Adjust Gain" and their interaction was not 100% clear.
21. At this point, we were basically done. First shot at exporting to a DVD was via File > Export...Media MPEG2-DVD. it seemed to work OK, but then right as the progress bar was finishing, we got this gem:
it lasted for more than a few seconds and was definitely not confidence-inspiring.
22. At this point it was 3am in the morning and mistakes were starting to be made. Consultation of the manual appeared to suggest that it was feasible to export to a DVD without using Encore, especially if one wanted to forgo menus. That sounded great to me, so I took the resulting .mpg file and rightclicked in the finder and chose Burn to disc... Well, that was a coaster. But I think the documentation could have been a lot clearer. Still, lack of VIDEO_TS and whatnot should have clued me in, right?
23. Managed to cons up a menu in Encore and burned the .mpg file to disc, producing a playable DVD. I gave up trying to figure out how to do it without a menu.
24. Having produced the DVD deliverable, there was then a request for color correction. Of course this is not surprising, why would a Canon G12 match a JVC HD100U? No way! Back in Premiere Pro, I foudn it very difficult to figure out how to color-correct camera 1 of the multicamera against camera 2. If I used the multicam stream, there were 100s of broken-up clips every time there was an edit. I certainly didn't want to color-correct every one of them. I really just wanted to apply a correction to all of Camera 1 and another one to all of Camera 2.
25. So I opened up the sequence containing both cameras (that is later imported into a parent sequence and marked as multicamera). Could not find a way to get the Reference: window to show one camera while the color correction window showed another. Ultimately we ended up muting video channels in the sequence temporarily such that the sequence/program window showed one clip or the other clip, while the source window showed another. But it seemed like it should have been possible to display both clips against each other for purposes of color correcting one or the other.
So, I think that's about it. I suspect there's a lot I did wrong, and certainly if I had more than a few hours I would have taken the time to learn the program properly (and still will!). But there are still a lot of spots where the program could be better.
Anyhow, thanks for listening. Cheers!

User synchronization issue between Active Directory and Solution manager.

Requirement:
Synchronize the users between Active directory and solution manager system.
What we did:
1. Created RFC connection (LDAP_RFC) for LDAP connector.
2. Created new LDAP connector that utilize the RFC (LDAP_RFC).
3. Created new logical LDAP Server(CUA).Here we have to maintain the connection
details to the physical directory.
4. We maintained the communication user that is used by the LDAP connector to bind the LDAP Directory Server.
5. In transaction LDAPMAP specific SAP data fields, we mapped to the desired
directory attributes.
6. Testing from LDAP transaction working fine. We are able to see the attributes and
values from Active directory.
Issue:
When executed the program RSLDAPSYNC_USER for user synchronization from t-code se38 with below selection .
LDAP Server = CUA (created earlier)
LDAP Connector = LDAP_RFC (RFC connection created created ealier)
In the tab: (Object that exist both in the directory and in the Database:)
Selected: Compare Time Stamp.
In the tab: (Objects the only exist in the Directory.)
Selected : Create in Database.
In the tab(Objects that only Exist in the Database:
Selected: Ignore Object.
Result from the report shows that connection to LDAP server is fine and 0(zero) objects in Directory.
The program does not create any new user in the Solution Manager system.
Any help on this issue greatly appreciated.
Thanks & Regards,
Harish

where did you see this error ? is there anymore details.
i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Thanks, Noddy

Any experience with custom handwriting fonts services?

Anybody tried services that make fonts out of your own handwriting? If so how did they work out? Any advice or suggestions?

It was some place in Oregon, Hood River, I think, but I don't remember exactly. Get Info on the font doesn't help. There were cards to fill out in several of the Mac magazines at the time. I'm sure a Google search will turn up a lot of options, maybe even one you can do online.
The idea was to use your printed writing, but I was able to do the letters well enough so that it does look like my handwriting. My signature is not made from individual letters, but the signature I referred to before. I think I saved it as a PICT from AppleWorks draw.

Creative, Is it worth it? (i.e. whats your experience with the Zen 16gb) and Firmware questi

After doing a sizable amount of research on the Creative Zen 6gb MP3 player, I was relati'vely comfortable with the product and decided to purchase it.
However, after browsing this forum for a few hours, I see quite a few things that trouble me about Creative in general:
"Real person" my (CENSORED) -horrible customer support
Creative Expects 3rd Quarter Loss, Sells HQ Building?
Message to Daniel_K -lack of product support/customer relations
and a countless number of other posts about hardware and software issues with the Zen
I really like the features built into the MP3 player (FM transmitter, voice recorder, Equalizer) and do not want to sell my soul to Ipod.
That being said, I wanted to see if there was anyone on this forum that actually liked their Zen and did not have issues with it.
I would greatly appreciate your positi've feedback as I hope that I will not have to spend countless more hours searching for and then researching a different MP3 player that fits my needs.
In addition, I was curious about the user interface on the Zen. I know that it uses ID3 tagging and that a folder directory cannot be used to view mp3s on the player (unless this has been added in a firmware update?, however I checked the site and did not see anything about this addition). How impeding is this ID3 tagging reliance if about 00 to 500 of my mp3s have incorrect tagging? as in, will I go crazy trying to retag everything because all I see if "Unknown" for all the data?
Yeah, that's about it for my long winded post...
Thanks,
Joe?

Just return from Mexico and found my Zen 4 GB player missing from a light finger baggage handler. I would not even consider, in a thousand years, of purchasing from the "fruit company" their overprice Ipod without a FM receiver. The Creative Zen rocks. Need I say more.

My experience with the white 3g and genius bar(apple support).

I bought my white iphone 3g 2 weeks after the release. 2 weeks later i notices a couple of hairline fractures on the case. One between the screen and headphone jacks and another between the charge/pc plug in and screen.
I did some searching and found it was a common problem and people were upset about it. I didn't mind so much since it was barely noticeable and did not affect the phone. I used my phone everyday for work, school, and personnel. I had the same experience everyone else had with it slowing down on the contacts and the typing coming to a near halt.
I was grateful when apple released a firmware update to address these issues. I'm an understanding person who understands that early adopting can have its drawbacks.
So back to the problems I had.
About 3 weeks ago my phone started doing something really weird. I was walking to class and the thing would vibrate every couple of second. I took it out of my pocket and it stopped. I thought there is no way i was hitting the toggle switch to silent. So after handling it for a few seconds, I noticed that it would go into silent and right back out when ever I put small pressure the case in the back. Having to go to class, I just put it in my book bag and ignored it for now. After class I took it out and it continue to do this. I did a hard reset and it still did it. So weird. So I carried on and came home that night. The next morning it had stopped bugging out. So I thought no more about it.
About 4 days after this my phone starting really going crazy. It would go on and off with no touch at all. I would shut off all together and come back on. Volume would go up and down for no reason. After about an hour of doing this I took it the ATT store, even though I knew they couldn't do anything for it. The ATT rep was puzzled to as it continued to do this.
I called and made an appointment at the Apple Store in Knoxville TN with the Genius guys. Since Knoxville is a 2 hour drive and I went to school and worked I made the appointment for Sunday. After leaving the ATT store and going home to bed the problem ceased that night. The next morning was Sunday so I canceled my appointment, as I did not want to drive 2 hours oneway if the phone was working fine.
This weekend I went down to GA to visit family. Today, on the way back I stopped at the Apple Store. Even though I didn't have an appointment I spoke with a rep and he said they would work me in since I don't live close by. After waiting for about 45 mins they had a slot open up.
I explained to the genius tech the problems the phone was having. As he looked over it he saw a hairline fracture on the back just beside the apple symbol about an inch long. I never noticed it. Apparently the case had been putting pressure on a circuit board causing some weird things to happen.
He promptly pulled out a brand new iphone and put my sim card it it. After a couple of minutes updating the new phone and clearing the old one of data, I was on my way.
So I guess what I'm saying is that I'm glad Apple is stepping up and doing the right thing. They continue to work on the os, apple store, and provide great in store support.
Two thumbs up for the Knoxville Apple Store
-Jeremiah

Serial numbers starting with 5K are white box only. They could be refurbished or new, but are coming from a China plant according to the serial number checker.
I received a 5K white box replacement Friday, and its perfect. So if it was refurbished or new, this factory is doing a good job with them.

New user experience with product

I just recently purchased this product and would like to share my experience so far.
Seems all products have a few warts, and we seem to always find them first. But, having used this now for about 2 weeks, I can say that this product was worth the money for me. It gives insight into existing apps that I didn't even know about. Makes working with new apps rather simple. If time is money, I'm now in the black with the amount of time saved.
Having said this, there are a few items I would like to see added.
Would be nice to include a bit of database and hibernate support (kinda like myeclipse)
I would like to see better support for struts-layout. This product sure makes layout easier
Might be there, but would be nice to better CSS suuport

I just recently purchased this product and would like to share my experience so far.Seems all products have a few warts, and we seem to always find them first. But, having used this now for about 2 weeks, I can say that this product was worth the money for me. It gives insight into existing apps that I didn't even know about. Makes working with new apps rather simple. If time is money, I'm now in the black with the amount of time saved.
Having said this, there are a few items I would like to see added.
Would be nice to include a bit of database and hibernate support (kinda like myeclipse)
I would like to see better support for struts-layout. This product sure makes layout easier
Might be there, but would be nice to better CSS suuport
Good post. I agree. I'm experiencing a few bumps as well. It's mostly due to my lack of familiarity with NitroX and trying to get RAD to work as well as WSAD 5.1.2 does. But overall I love NitroX and the 40% of the product abilities that I'm using right now are well worth it. NitroX makes our IDE (WSAD and RAD) much more of a complete tool. I can't wait until I've had a few months with this tool.

UME user search with multiple search fields (AND / OR search)

Hi,
I'm struggling with a UME user search problem. I have multiple search fields: lastname, firstname, department
Searching in this fields is working with the default IPrincipalSearchFilter.SEARCHMETHOD_AND (default)
<a href="http://help.sap.com/javadocs/NW04/current/um/com/sap/security/api/IPrincipalSearchFilter.html#setSearchMethod(int)">JavaDocs SearchMethod_AND</a>
Now I would like to add an additional search field for searching in telephone, cellphone as well. BUT searching for a phone number with searching for one of the other fields should not be a AND search. Is this possible?
Here is the actual non-working code:
 Vector retVector = new Vector();
 //get Userdata with IUserFactory
 IResourceFactory resourceFactory = ResourceFactory.getInstance();
 IURLGeneratorService urlGen = (IURLGeneratorService)resourceFactory.getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
 IUserFactory userFac = UMFactory.getUserFactory();
 IUserSearchFilter srcFilter = null;
 try
 srcFilter = userFac.getUserSearchFilter();
 } catch (UMException e)
 // TODO Auto-generated catch block
 e.printStackTrace();
 if(lastName.length() > 0)
 srcFilter.setLastName(lastName + "*",ISearchAttribute.LIKE_OPERATOR, false);
 if(firstName.length() > 0)
 srcFilter.setFirstName(firstName + "*",ISearchAttribute.LIKE_OPERATOR, false);
 if(department.length() > 0)
 srcFilter.setDepartment(department + "*", ISearchAttribute.LIKE_OPERATOR, false);
//Here I need help!!!!!!! Please advice!!!
 if(telephone.length() > 0)
 srcFilter.setTelephone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
 srcFilter.setCellPhone("*" + telephone, ISearchAttribute.LIKE_OPERATOR, false);
 //if(mobil.length() > 0)
 // srcFilter.setCellPhone("*" + mobil, ISearchAttribute.LIKE_OPERATOR, false);
 //Set maxium value for Result and thus limit the static variable SIZE_LIMIT_EXCEEDED
 //This method can only be used, if only one search attribute is specified -> thanks SAP
 if(srcFilter.getElementSize() <= 1)
 srcFilter.setMaxSearchResultSize(300);
 ISearchResult srcResult = null;
 try
 srcResult = userFac.searchUsers(srcFilter);
 } catch (UMException e1)
 // TODO Auto-generated catch block
 e1.printStackTrace();
Thanks for any help...
Stefan

Hello,
I could still need some help. Is there no one who could give me a tip? Could I explain my problem clearly enough or do you need some more information about my problem?
Or is the search topic with searchFilter not a very common used thing?
Is there a possibility to do a search in the received search result? Can anyone explain how this would work?
Any ideas are welcome.
Regards,
Stefan

Has anyone any experience with a USB-6008 and reading a thermistor value

Labview 8.0 connected to a USB-6008
I am using 'BC Components' NTC Thermistor. I used the express VI to create a Vex input and entered the A,B,& C values from the datasheet. The thermistor is the 10K version and I placed a 10K resistor in series with it. I wired it as is shown in the connection diagram, and applied 2.5 volts to it.
I get completly the wrong temperature readings out of it! I called the NI help line in the UK and the engineer confirmed that I had done everything correctly but couldn't understand why it didn't work.
Any thoughts?
Steve Lawson

I had a similar problem, had it working at one point then screwed it up.
try this:
Attachments:
Temp Pressure EXpress.vi ‏92 KB

Experience with transporting customizing entry and deletion of INOB table

Hello,
we had a strange issue here.
There was a transport related to customizing for classification moved to consolidation system.
Next day we mentioned that the content of table INOB was lost.
We found a OSS with explained that our transport could generate data loss in INOB table.
Now we have a question.
Is there any chance to regenerate the content of this table?
Best regards
Dirk

Hi,
If transport is compulsory ,please have a back up of data present IN INOB table or else load that data ina Z table so that when u require it u can reload it again.
Please have a look at these notes.
Note 74685 - Allocations INOB entries not consistent
        211119 - Class assignmts disappeared after deleting a class
        87888 - Missing INOB records and Engineering Change Mgmt
        81898 - RCCLBI02: Incon. allocations, INOB is missing
Regards,
Lakshman.

User Experience with CS/CS2 fonts and font management

Similar Messages

Maybe you are looking for