User id for the Message creator PROD- PI sheet

Hi All,
I have a requirement wherein I would like to check the user who has created/reported the process message (PROD). The "Prod" message is sent using the Schedulede job, so has the batch user id associated with it. Currently the Sender as seen in the message header - COMH table is the CRD destination address. The document created post goods movement -101, has the Doc created by as -" Batch user id" (as mentioned above for the scheduled job).
Can you all help me as to how can I get the User ID who is actually responsible for the message creating - as the result of this message is the material document. This will give me also the actual creator of the material document (currentl due to batch job the creator displayed is the batch user id) ?
Thanks in advance.
Regards,
Amol

Hi Amol,
Standard SAP does not support what you are looking for. However SAP has proposed a couple of options to accomplish what you are looking for. Please refer to the link below:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=628297
Please let me know if you need additional information.
Thanks and Regards,
Prabhu

Similar Messages

User exit for MIGO, message type MLGR

Hi Guys,
My Client wants to send mail to the Purchase requisitioner, once the material, he requested, has arrived in the premises (once GR is done).
Standard SAP has Message type MLGR, which sends mail to the Purchase Order Creator.
I want to use user exit in MLGR to change the mail recipient from PO Creator to Pur Req creator.
Can anyone please tell me the user exit for the same?
Regards,
Ankush

Thank you for the quick response. I have setup all the configuration on SALE with
1. Creating rule
2. Maintain the rules with the default values
3. Then Assign the above rules to the message type MATQM but still not pickup the new values that I wanted to be.
Is there anything that I miss? Please advise.
Thanks again,
Tai

Status Profile and User Status for Support Message

Hi All,
We need to customize Status Profile and User Status Specifc to customer requriments.
we need the following Status for Support Message:
Open
Accepted
Rejected
Fixed
Retest
Closed
Note:
1] Only the Message creator should be able Set staus Open and Closed
2] Message Processor should only set status Accepted, Rejected, Fixed and Retest
I have created the Status Profile in BS02.
Can some one help me the steps or guide how to implement the above logic and restrict the status access between Message Creator and Message Processor
Thanks!
Regards,
Pradeep L

> 1] Do i have to create different Auth.key for Message processor and Message creator and then assing them in BS02 to Status Profile?
       Anand: Diffrent authorization key for different statues......not for message processor and creator
> 2] Now how do i assign this Auth.Key to the Auth Object B_USERSTAT?
       Anand: Using Tcode PFCG, this can be done.... Consult Basis.....
>     do i have to create a new Zrole and assign or is there any other way.
       Anand: Yes u need to create a Z role and include that authorization objects in that z role....
       so u might have to create 2 Zroles and then assign them to the persons concerned....
Inspire ppl by rewarding
Regards,
Anand...

JOB_OPEN - SUBMIT - JOB_CLOSE - User Name for the Job

Hi,
I have a code like that:
CALL FUNCTION 'JOB_OPEN'
    EXPORTING
      jobname          = lv_jobname
    IMPORTING
      jobcount         = lv_jobcount
    EXCEPTIONS
      cant_create_job = 1
      invalid_job_data = 2
      jobname_missing = 3
      OTHERS           = 4.
* Call Update PO from Sales Order
SUBMIT zpcc_mm_upo3
    WITH p_vbeln = puv_vbeln
    USER lc_uname
    VIA JOB lv_jobname NUMBER lv_jobcount
    AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
    EXPORTING
      jobcount             = lv_jobcount
      jobname              = lv_jobname
      strtimmed            = lc_true
    EXCEPTIONS
      cant_start_immediate = 1
      invalid_startdate    = 2
      jobname_missing      = 3
      job_close_failed     = 4
      job_nosteps          = 5
      job_notex            = 6
      lock_failed          = 7
      OTHERS               = 8.
In this code as you see I can run the SUBMIT program with a specified user. But the creator of the job always becomes SY-UNAME. So is there a way to specify the user name for a job creator? I don't want to use SY-UNAME.
Thanks,

Hio try this way...
CALL FUNCTION 'JOB_OPEN'
     EXPORTING
       jobname          = lv_jobname
     IMPORTING
       jobcount         = lv_jobcount
     EXCEPTIONS
       cant_create_job = 1
       invalid_job_data = 2
       jobname_missing = 3
       OTHERS           = 4.
"Comment this
* Call Update PO from Sales Order
   SUBMIT zpcc_mm_upo3
     WITH p_vbeln = puv_vbeln
     USER lc_uname
     VIA JOB lv_jobname NUMBER lv_jobcount
     AND RETURN.
"Comment end
* Call function to submit the job
CALL FUNCTION 'JOB_SUBMIT'
       EXPORTING
            authcknam                   = wa_authchknam        "Pass the Other User name you want
            jobcount                    = lv_jobcount
            jobname                     = lv_jobname
            REPORT                      = 'zpcc_mm_upo3'
            VARIANT                     = jobs-variant "Create Varaqint
            PRIPARAMS                   = wa_PRI_PARAMS
      EXCEPTIONS
           BAD_PRIPARAMS               = 1
           BAD_XPGFLAGS                = 2
           INVALID_JOBDATA             = 3
           JOBNAME_MISSING             = 4
           JOB_NOTEX                   = 5
           JOB_SUBMIT_FAILED           = 6
           LOCK_FAILED                 = 7
           PROGRAM_MISSING             = 8
           PROG_ABAP_AND_EXTPG_SET     = 9
           OTHERS                      = 10
   CALL FUNCTION 'JOB_CLOSE'
     EXPORTING
       jobcount             = lv_jobcount
       jobname              = lv_jobname
       strtimmed            = lc_true
     EXCEPTIONS
       cant_start_immediate = 1
       invalid_startdate    = 2
       jobname_missing      = 3
       job_close_failed     = 4
       job_nosteps          = 5
       job_notex            = 6
       lock_failed          = 7
       OTHERS               = 8.
Prabhudas

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

ORA-24033: No recipients for the message.

I have followed the steps described in the following article.
http://www.ibm.com/developerworks/websphere/library/techarticles/0807_tuli/0807_tuli.html
1. I have set up a queue manager on MQ with queues
OMG_OUT_LOG_QUEUE and OMG_MQ_QUEUE
2.Had to modify "schedule is necessary for transferring messages from AQ to MQ" from
source => 'apps.OMG_SAMPLE_QUEUE', to
source => 'SYS.OMG_SAMPLE_QUEUE' as this was causing error.
When I am trying to put the message on to AQ to transfer it to MQ, I am getting the following
error:
ORA-24033: No recipients for the message.
Can anyone help with the above error?

Yes, and the very most annoying thing is, that a similar Java setup does NOT return any information that the message is not enqueued !/(#&%!"/! So you can have a faulty setup - and a program doing mio of enqueues (and no one apart from the end user discovers that somethings was very wrong). How rude !!!
I would reaaly like to see the same Oracle return code in PL/SQL and Java ..... (and other languages for that matter, but I have only tested with pl/sql and java in this case)
Mette

How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

You can't, at least not the one provided by Apple.
B-rock

User-Exit for the Me22n

Hi,
I am Mohan. I faced on Problem with the User Exit. I write the user exit for the ME21n for PO Creation. While Creation of the PO the Purchase Requition is mandatory. it is working for the ME21n. But PO creation is another two ways is there. Those are ME22N (Purchase order---> Create) and ME23N
(Purchase order---> Create) for this case also my condition applicable but it is not working for this case. How to write the Code for this. by using Sy-ucomm also. but it is not working.
Please help me.
Regards,
Mohan

Following the user exit's related to ME22N transaction.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
Regards.

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Where can I download a user manual for the BG-ED3 grip that is on my Canon EOS 10D

I have a canon bg-ed3 grip on my canon EOS 10D. From where can I download a user manual for the grip

This help? Scroll down.
http://www.canon.com/camera-museum/tech/report/200009/report.html

Where can I find the Users Manual for the DROID TURBO?

Where can I find the Users Manual for the DROID TURBO?

https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,9277/session/L3RpbWUvMTQxNTI0NTY1Ny9zaWQvc0xvbk1JNm0%3D#/how_do_i

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time.

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time. Any idea how to get the notes back? I really dont want to lose them.

It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

User id for the Message creator PROD- PI sheet

Similar Messages

Maybe you are looking for