User issue with a report supply planning area today monthly

this is a support issue....the user has an issue with a report supply planning area today monthly. The user is getting wrong values in BW, it sums PLOs and POs under production (config). for eg: BW says we are producing 46T while in R/3 we have 4T.

The issue was related to the heap size being too much and as a result the Class block memory was not getting enough memory. I think we can make a use of -XXCompressedRefs:32 parameter in the Java start up to allow the heap size to increase till 32 Gb.

Similar Messages

Performance Issue with VL06O report

Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
Surya

Sreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
     appending corresponding fields of table lt_select
     where     vbeln in ct_vbeln
     and     posnr eq posnr_initial
     and     parvw eq 'SP'
     and     lifnr in it_spdnr.
I don't see any issue with this query. I give more info later

Variable input values issue with Portal reports in WAD

Hi Gurus,
We have issue with our reports which are created in WAD and when executed through CRM portal. We are executing the report with some selection criteria by changing default values, and once we get the out put we use SAVEAS option to save the report to favourites. But the issue arises when we open the reprot again by clicking OPEN tab next to SAVEAS button. It opens our report, but the selection screen vaues are getting changed to default instead of showing the values which we entered before saving the report.
ex: we have fiscalyear/period: default value is 001.2009 - 010.2009, but i changed the value to 001.2010 - 010.2010 and saved the out put of the report. when i reopen the report useing open option, it is showing 001.2009 - 010.2009 in input screen.
Please let me know if some one has come accross this issue, or is it standard SAP behaviour. It is working fine when executed through Query designer. This is not related to personlization of variabl.es.
Regards,
Yada

Hi Hari,
Thanks for your promp response...but is there any settings to get the variable values with out saving as variant, because its working fine when executing through query designer....
Regards,
Yada

Issues with BEx Reports in SAP Enterprise Portal

Hello Experts,
I am facing issues with BEx reports integrated in portal. Below are more details:
Scenario 1:
Execute a BEx report in the portal, save it in 'My Portfolio' using 'Save As' button. Now open the saved report from 'My Portfolio'. Below is the issue for this scenario:
When I open the saved report, I get 2 error messages and 1 info message at the top of the report. They are as follows:
The metadata of 'ITE' 'TEMPLATE_PARAMETERS' are incorrect for parameter 'COMMAND_PROCESSING'
The metadata of 'ITE' 'FILTER_PANE_ITEM' are incorrect for parameter 'TEXT_WRAPPING'
Variables for characteristic Fiscal year/period[0FISCPER] cannot be processed
Scenario 2:
Execute a BEx report in the portal, save it in 'BEx Portfolio' or 'Favourites' using 'Save As' button. Now open the saved report and click on 'Send' button. As expected, the BEx broadcaster wizard should appear but, it shows '400 BAD HTTP REQUEST'. While if I open the report (not the saved one) and click on 'Send' button, it works.
Helpful pointers appreciated.
Thanks
Vikash

HI Suman,
I am not adding the report to favourite using browser favourite. Below is the flow:
Run the report in portal.
There is a 'Save As' button at the top of the report. When I click that button, I get a pop-up with 3 tabs for saving the report.:
Favourite
BEx Portfolio
My Portfolio
save the report in the favorites or BEx portfolio tab and then open it and press 'Send' button
BEx Broadcaster Wizard should appear but instead of that, it shows '400 BAD HTTP REQUEST'.
If I press send for unsaved report, then BEx broadcaster Wizard is shown.
Thanks,
Vikash

Issue with Scheduled Reports

Having an issue with running reports. We have created the folder under C:\Program Files\Cisco CRS Historical Reports\reports ..to resolve a bug but now the user gets the attached error message every morning. Any ideas?
Thanks,
Joe

Hi Joe
No attachment?
Aaron

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

Is anyone else having issues with "skipping" while the songs are playing?! It is very aggravating to us... and we've had it going on for several months now. Any ideas at all how to fix it?

So, don't use youtube.
http://www.the-top-tens.com/lists/best-alternatives-youtube.asp
http://www.youtubealternative.com/

IMac went totally black. No power to the unit. Have there been issues with the power supply?

My iMac went totally went black tonight when my grandchildren were using the iMac. I can't power it up? Have there been issues with the power supply?

It may just be the power cord (between the mains and the computer). If you have an Apple store or Authorised store near you, take the cord in and check it out. Indeed, check if it has been partly pulled out by pressing it firmly into the back of the computer.

Performance issue with BW Reports for concurrent users

All:
I notice that one BW report that runs in few seconds will take upto 3.5 minutes when multiple users run it at the same time.
We are in BW 3.5 and we run reports for portal.
Does anyone have any suggestion about how to handle performance issue with concurrent users?
Thanks,
Pranab

Hi,
use the OLAP-cache and/or aggregates and consider using load balancing to distribute the users to several servers.
Kind regards
/martin

Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

CRS 5.0(1) issue with historical reports

Hi support community,
I'm facing an issue on a CRS 5.0(1) with historical reports (HDS).
Last known issue on the Windows Server was that there were no free space on hard drive.
This is now fixed and everything looks fine again.
Now the user reporting that they could not get historical reports.
As far as I could troube shot this issue by now, I can say that all regarding services are up and running.
I can still run reports for the current day but not for the last week or month.
So I guess there is a issue that the CDR don't stay in the MSSQL server.
I go through the logs and could not find anything suspicious.
Just one thing gives me to think of, in the database "da_cra" / table "ConfigLog":
- last entry was on 07.11.2012 where the space issues started
- I could not get any usefull information about the last entries
CRS 5.0(1) is not supported by TAC anymore so I hope some one could put me in to the right direction for further trouble shooting.
The user need the HDS reports until a new soloutin for CC is online.
My action plan looks as following:
- enable tracing for SQL - HDS
- perform check table / repair table on MSSQL
Unfortunately there is a message when I try to enable the tracing, but I don't get it what this message try to say me.
I don't know any MSSQL commands to run such checks / repairs.
Regards, Alexander

Hi Anand,
let me see if this could help.
I'm facing an issue that we could not get data older than current day.
So if the database would be reached the maxium size so I guess we could not get the latest CDR but older one, right?
But in our situtation we have a vice versa situation, we get current CDR but not historical.
I checked the purge settings:
- schedule is configured to daily "12:00 AM"
- purge data older than "99" months
- notify when database reach "70" % of 2048 MB
- initiate autmoatic purge when databse size exceeds "80" % of 2048 MB
- auto purge data for the oldest "15" days
So this should be fine
I attached the PurgeProcess.log and have some questions about it:
line 4: Calling execute with purge date sat nov 27 00:00:03 CET 2004
--> where is this date coming from? date time settings are correct on Windows host
line 17: oldest record in the database has a timestamp of tue feb 26 07:27:39 CET 2013
--> this is excatly what I experience, any how the purge process gone crazy and deleting to much CDR's
line 18: database size exceeded auto-purge threshold of 80%
--> why is the database have such a great size if the lates record is from day before (call amount ~ 500 calls per day)
So at this point I have two questions why is the time stamp wrong and how could I clean up the database (what are these data which fill 80% of database)
Thanks and Regards, Alexander

BW hierarchies issue with BOBJ Reporting tools

Hi All,
Brief about the requirement:
Our client was using Mainframe and other tools for their reporting. Now as they have planned to go for SAP, purchased SAP BW 7 and SAP BOBJ XI 3.1 for warehouse and reporting purposes.
Initial Road map planned for implementation was
o     to use Crystal for operational and formatted reporting
o     to use WebI for Ad hoc and interactive reporting
o     to use Xcelsius for Dashboards
Once we started analysing the requirements, we observed that client requires hierarchies extensively for reporting and they donu2019t want to compromise in that for reporting. At this situation we have explored the options and came to know from the SAP sites that BO got limitations in case of BW hierarchies. But we not able to articulate the what is the exact issue. Is it with only WebI or Crystal also?
What we have articulated is we cannot report the hierarchies in BO in terms of nodes - > Sub nodes -> sub nodes instead we can do as fixed columns. Please add me if i am missing anything else.
And also please let us know options. Options that we were thinking are Implement with BO XI 3.1 considering Advanced analysis tool then upgrade to BO XI 4.1.
Please suggest us, what is the BW & BO hierarchy issue and right tools to use.
Thanks & Regards,
Bala

Our client uses XI 3.2 but is experiencing issues with Hierarchical BEX queries returning blanks - the mdx is fine - just webi that seems to have a problem and I'm also trying to determine in exactly which instances this occurs.
XI 4.x supposedly resolves mots issues but here again details are not known.
I.e. hopefully someone can point to an info source that describes in more detail what issues are likely to occur re hierarchies and webi.

Issue with Crystal Report based on 2 different data sources

Hi there,
I am having a frustrating problem with a report I've designed and I'm hoping someone might be able to assist please.
The report has 3 different prompts, each of which is based on a dynamic list of values retrieved via views within a SQL server db.
We are wanting to introduce the use of Universes as much as possible, so the data returned is based off a BO Universe data source query.
I have uploaded the report into BO and have provided the necessary database logon information for the report (in the "Process" > "Database" settings in the CMC) for both the direct db datasource connection (for the views) and the BO Universe query connection.
When the report is run however, the report still prompts for the database user name & password credentials. I have triple checked my db connection settings, and also have "Use same database logon as when report is run" set to true. I also tested a cut-down version of the report without the Universe connection with the same db logon credentials I provided and there was no credentials prompt when it was run, proving those values are accepted.
Does anyone know why this is happening & if there is a way around it? Alternatively, is there some way that a report prompt may be based on a dynamic list of values retrieved via a Universe connection? This way I'd be able to remove the db connection for the views and have the report solely based on the Universe.
Another issue that occurs is out of the 3 prompts, a user can select a User Name OR Number, and also must select a Period. However if the User Name or Number is left blank the message "The value is not valid" is shown. So I tried a cut-down version of the report with only the BO Universe as a data source (static prompts) and this didn't occur, i.e. I was allowed to leave either the User Name or Number empty.
I hope this all of makes sense - let me know if not. If anyone is able to help out with any of this it would be very much appreciated.
Cheers,
Marco

Please re-post if this is still an issue to the Business Objects Forum or purchase a case and have a dedicated support engineer work with you directly

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Issue with XML report printing on R12 instance

Hi,
I'm facing issue with printing xml reports on R12 instance and followed the note (How To Print XML Publisher PDF Reports Via The Concurrent Manager:metalink id:338990.1) and configured the pasta printer,still printer output is showing the junk charcters.
Please let me know how to resolve the issue?.

Hi Hussien,
We are on 12.1.1 / 11g with AL32UTF8 character set, we have custom reports developed in BI publisher and some some migrated reported from earlier version.
Both BI publisher based custom like PO/Invoice/Cheque Print & seeded reports like "Active users/responsibilites" are being generated successfuly in pdf output. when copied to desktop and printed it prints properly. But when trying to direct output to printer from concurrent request it is printng junk.
I checked pasta configuration, all required ghostscripts tools are on the AIX box, am I missing anything in R12?
Regards

Back up cube for report from planning area

Hi Gurus,
We are in implementation and i had seen that client wanted to see daily data and wanted to delete that data and load next day data.One more point is client even wanted monthly data as well in a same cube and this two facilities should be in single info cube.
How is is possible?
for further info we have calday and calmonth time Chart.
please suggest me some good ideas.
I will be verythankfull to your suggestions.
Thanks a Lot
Regards,
Raj

Hi Raj,
You can use SAP BW to create reports for the user. You have the option of using an external BW system or the BW system that is coupled with the APO server. If you have an external BW system, then it is recommended that you report from there. As you may know APO is an OLTP system and thus is configured for such. The external BW system will be configured for OLAP access and thus would be much more suitable for reporting purposes.
You may want create a SAP RemoteCube so that the data in your report is "as fresh as possible".
Here are the steps if you will be using the BW component in the APO system:
1) Create an export datasource for your planning area. (Transaction /n/SAPAPO/SDP_EXTR)
2) Create an InfoSource and attach the datasource your have created in step 1. (transaction RSA1 Modelling tab)
3) Create a SAP RemoteCube and attach your InfoSource and SourceSystem to that.
4) Create a BeX query and a BeX report (either in Web or Excel).
If you will be using an external BW system here are the steps:
1) Create an export datasource for your planning area in the APO system (Transaction /n/SAPAPO/SDP_EXTR)
In the external BW system:
2)replicate the datasource your have created.(transaction RSA1, Modelling tab, sourcesystems->choose the APO system->Right click->Replicate DataSources).
3) Create an InfoSource and attach the datasource that you have created in step 2. (transaction RSA1 Modelling tab)
3) Create a SAP RemoteCube and attach your InfoSource and SourceSystem to that.
4) Create a BeX query and a BeX report (either in Web or Excel).
Note that a RemoteCube is only suitable for few users only. If you will have many users, you need to create a Basic InfoCube instead.
In your BeX query, you can choose the granularity of your report. If you want your report to be aggregated to monthly level then be sure to include the 0CALMONTH InfoObject.
Please post again if things are not clear and I will be happy to help out.

User issue with a report supply planning area today monthly

Similar Messages

Maybe you are looking for