User 'Levent2-PC\Levent2' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.

I have run Report Manager which show the below error
and
web url show below error
What should I do for solve this error?
Plz give replay quicKly

Hi tusharshinde,
Based on my understanding, you come across an issue when you try to access report manager and report server.
In Reporting Service, after installing a new report server, only users who are members of the Local Administrators group have permissions to access report server. If we want to grant permissions for other users to access report server, we should add users
to an item-level role and system-level role. Please refer to this article:
Grant User Access to a Report Server (Report Manager).
According to the screenshots, it’s clear that you don’t have sufficient permission to access report manager and report server. So in this scenario, please make sure you are members of local administrators group. To fix the issue, you could run IE browser
as administrator and add your account to an proper item level role and system-level role. If issue persists, please temporarily change the User Access Control settings to “Never notify”. For more information, please refer to articles below:
SQL Server Reporting Services Report Manager Site Permissions Error After Installation
rsAccessedDenied - Reporting Services Error
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Similar Messages

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Airport does not have IP address and Self assigned IP address

Using a 2.66GHz Mac Pro with OS X.6.6 and a Netgear DNG200 wireless and installed Airport Extreme Card and WPA2 security.
In Network click on Airport and 'Turn on Airport' Up comes the message 'Airport dos not have IP address and is unable to connect to the internet'.
Go into advanced and double click 'Network Name'. Supply password even though remember is selected, and message changes to "Airport has Self Assigned IP address 169.254.etc.etc and will not be able to connect to the internet'.
After repeated back to Network Name and double clicking and supplying password eventually connects. Simple to reconnect by selecting Turn Airport On in Menu Bar so long as the machine is not turned off.
Any suggestions please?
Message was edited by: harryb

Hi,
http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/
Hope it helps.
Cheers.

Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Starting IE as administrator starts the Report Manager with out problems.
Does anyone have suggestion, is more information needed? Thanks, Joe
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

Hi Joseph_SQL,
The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
2008 and Windows Vista.
Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
we can refer to the following configuration steps:
Add Reporting Services URLs to trusted sites.
Report Manager Folder Settings
Report Manager Site Settings
For more details about how to configure the settings, please refer to the following article:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
Run as administrator.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Check for Updates and User Account Control

With Adobe Reader the 'Check for Updates' function under Help does not appear to function when 'User Account Control (UAC)' in Windows Vista is turned on.
When UAC is turned off, the 'Check for Updates' works, and if there an update is available for Adobe Reader, it will download and install.
Other programs that update software funtion with UAC turned on, albeit with the additional dialog boxes that UAC brings, namely the CTL/ALT/DEL and user account logon (when applicable.)
Without updating the Adobe Reader software, users are leaving themeselves open to vulnerabilities. Without UAC turned on, users are also leaving themselves open to certain risks. So there appears to be a dilemma presented.
Does anyone know if/when Adobe will be changing the 'Check for Updates' functionality so it will behave more in-line with the UAC functionality?
Thank you in advance for your time and attention.

With UAC enabled, I start Adobe Reader, click on Help, and there is no selection for updating. There is nothing for me to click. Additionally, in Edit, Preferences, Updater, "Do not download or install updates automatically" is selected, and everything on the right pane is greyed-out.
With UAC disabled, I start Adobe Reader, click on Help, and there is a selection for 'Check for Updates.' In Edit, Preferences, Updater, I can select the various methods of downloading/updating Adobe Reader. The option to download the update but not install was selected, as I wanted it to be.
Finally, I noticed that the notice from Adobe, 'Update is ready to install,' appears in the Windows tray. And it is this point that somewhat changes the serverity of the problem, that is, while 'Check for Updates' is not available when UAC is enabled, it appears that Adobe can still be updated through the automatic download feature. The only problem with this is that I cannot tell if the update was downloaded while UAC was enabled (probably not since the download setting says not to) or while UAC was disabled.
In any case, it still does not appear that our clients can get their Adobe Reader software updated while UAC is enabled. And this represents a security dilemma for us.

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

VMM Shared ISO error "User account does not have permission required to open attachment"

I had this error once because the local service account was selected during installation of VMM. I have reinstalled VMM with a Domain service account and the error went away. However, the error is back.
"User account does not have permission required to open attachment '\\[servername]\VMMLibrary\server.ISO'. Error: 'General access denied error' (0x80070005). (Virtual machine ID GUID)"
I tried to create this VM on Host1 and got the error.
I then went to Host2 and was able to create the VM while using the same ISO on the same VMM library that failed on the Host1.
Both hosts have agent 3.2.7634.0 and are both running Hyper-V Server 2012 R2.
What is wrong with Host1 and how do I correct it?
Thank you.

This is a share configuration permissions issue.
http://technet.microsoft.com/en-us/library/ee340124.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flas

I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flashplayer.xpt:5) could not be written due to insufficient permission.

Perform a clean install as described in https://forums.adobe.com/thread/928315

Export failing with "The user does not have the required rights to perfrom

We are testing an upgrade to BOXI 3.1. We use the CrystalReportViewer .net web control to view the report. When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
"The user does not have the required rights to perfrom this operation. Please contact your administrator. "
Notice that perfrom is not spelled correctly. This is what actually gets displayed.
I'm not too concerned about the spelling, but I do want to fix the error. So I checked the security on the folder and the user does have full control. Both advanced security options are selected:
-View document instances that the user owns
-Export the report's data
So what else could be causing this?

I had applied the full control access to the wrong group. Once I applied that access to the user that actually generates the report, it worked.

The wifi available in the building I live in requires you to accept a user agreement each time you log on (obviously Apple TV does not have the option to display a browser webpage, so is there any other way to connect my Apple TV to the wifi??

Hi guys,
I cannot get my Apple TV to connect to the only available wifi connection in my building.
Basically when I log on to it with other devices you have to type in a password (like all wifi connections) but then it opens a browser window with a user agreement that you have to accept each time you log on. Since Apple TV does not have a browser option I can't log it on.
Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Thanks guys!

Is there anyway around this issue???
Or is there anyway to get content from my iPad to display on my Apple TV without an Internet connection on the Apple TV???
Unfortunately not.

The user does not have permission to perform the operation

Hi,
Configuration: JES Q405. Solaris 10 x86.
My customer initially installed JES (Portal + AM + DS) on the same box.
Now, they have a change in their requirement. They want DS to run dedicatedly in another box.
I have successfully installed a fresh instance of DS in the new box with the same domain name (thus maintaining the same dn). I have copied over 99user.ldif and exported all the data from the original DS in the old box.
Everything is running fine. DS in the new box is able to function properly.
On the Portal and AM side, I have changed the following file:
1. AMConfig.properties
2. serverconfig.xml
3. PSConfig.properties
I have also changed the Primary LDAP entry in iPlanetAMAuthLDAPService, iPlanetAMAuthMembershipService, and iPlanetAMPolicyConfigService.
However, when I started AM (which is running on Sun Web Server), I got the following error message:
------------------- in /var/opt/SUNWam/debug/amSDK ---------------------------
05/01/2006 04:46:43:324 PM SGT: Thread[main,5,main]
ConfigManager->Constructor: root DN dc=sg,dc=com
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Invoking _ldapPool.getConnection()
05/01/2006 04:46:43:403 PM SGT: Thread[main,5,main]
Got Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=DSAME
Users,dc=sg,dc=com"}
05/01/2006 04:46:43:410 PM SGT: Thread[main,5,main]
Invoking _ldapPool.close(conn) : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"c
n=puser,ou=DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
Released Connection : LDAPConnection {ldap://sg-dsq405.sg.com:389 ldapVersion:3 bindDN:"cn=puser,ou=
DSAME Users,dc=sg,dc=com"}
05/01/2006 04:46:43:411 PM SGT: Thread[main,5,main]
ERROR: ConfigManager->Constructor: Caught exception Message:The user does not have permission to per
form the operation.
------------------------------------ end --------------------------------------------------
-------------------------- in /var/opt/SUNWam/debug/amAuth ---------------------
05/01/2006 04:47:21:252 PM SGT: Thread[main,5,main]
Directory Host: sg-dsq405.sg.com
Directory PORT : 389
05/01/2006 04:47:21:298 PM SGT: Thread[main,5,main]
AuthD initializing
05/01/2006 04:47:21:610 PM SGT: Thread[main,5,main]
ERROR: AuthD failed to get auth session
05/01/2006 04:47:21:688 PM SGT: Thread[main,5,main]
ERROR: AuthD init()
com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:709)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:229)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:494)
at com.sun.identity.authentication.UI.LoginLogoutMapping.init(LoginLogoutMapping.java:71)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:813)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3478)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3760)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
----------------------------------------- end --------------------------------------------------
Any idea how to solve this problem? Thanks in advance!
justCheeChong
Message was edited by:
justCheeChong

check if the new DS instance has all the AM required ACI's.

List the items the user does not have access to.

I have a requirement to show the user a list of all the libraries of a site with the number of items in each even if the user does not have rights to the library. (the link or button will be grayed out if the user has no access)
I am looking for opinions on how to do it with the best performance possible.
The first candidate is to first enumerate all the items in all the libraries with elevated then do the same as the logon user and compare the collections.
The drawback is performance so maybe rely on the assumption that the overall content of the site does not change often so keep the collection from the elevated run in cache (with configurable lifetime) and only run as user on page load and compare with the
cache.
I am sure there is probably a better way so let's here it. can we take advantage of search?
This is on SP2013 but we are not using apps for unrelated reasons. We can use server object model.
Thank you all.
Ofer Gal

Hi,
I believe Search cant be used since Search is Security Trimmed. Search will not return the result if user dosent have the permission.
Thanks! Best Regards, Prasham Sabadra http://prashamsabadra.blogspot.in

Project Server 2013 - User does not have permission to create a WSS site

We have Auto-Publish enabled for the project by the Owner. The issue is that when a user submits his updates, the updates are auto approved and auto-published but it also ends up showing below error to the user.
General
•User does not have permission to create a WSS site.:
◦GeneralSecurityAccessDenied (20010). Details: id='20010' name='GeneralSecurityAccessDenied' uid='---'.
•Queue:
◦GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='---' JobUID='---' ComputerName='---' GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='54a0c79c-da9b-c011-2554-5fb474e440c6'.
For more details, check the ULS logs on machine --- for entries with JobUID ---.
And in the Project Queue, the failed job type and job state are
Job type- Project Site Update
Job State - Failed But Not Blocking Correlation
We have disabled Site Provisioning for Project publish.
Can anyone point us on how auto-publish works and what all permission is required by users or owners?

Hi Goahh,
It might be that your issue has nothing to do with the rules set to auto-publish the project. Try to inactivate the auto-publish for a test project and try if the publication by itself works. Or simply try to publish a project from MS Project Pro and see
if you still get the error message.
Has it been working before?
Check also that the "Manage SharePoint Foundation" permission is enabled for the security groups in question.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Error: The user does not have sufficient privileges to install Adobe Flash Player

I get an error when the system tries to install Flash Player 11. It forced me to install when running a publish in captivate.
The user does not have sufficient privileges to install Adobe Flash Player
I tried to the advice from http://forums.adobe.com/message/4970296 to download and install offline version. I get this error:
A required file (C:\Windows\system32\Macromed\Flash\FlashPlayerUpdateService.exe:5) could not be written due to insufficient permissions.

Try a clean install as described in http://forums.adobe.com/thread/928315

UPC_F104 Entry not possible, var does not have replacement type user-spec.

Hi,
On of my exit variable keeps issuing me the following message when selecting a value:
UPC_F104 Entry not possible, var does not have replacement type user-spec. vals
This exit variable is based on other variables (non-user specific). The indicator 'Restriction of values required by user' is flagged.
Any idea what might be the issue ?
Thanks
David

David,
User exit variables won't work if there are multiple rows of values being derived incase 'Restriction of values required by user' is flagged.
Make sure that derivation of variable value is restricted to only one row.
if you have a need to derive multiple rows of values, simply uncheck the flag 'Restriction of values required by user' & you will be good to go.
hope it helps.

User 'Levent2-PC\Levent2' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.

Similar Messages

Maybe you are looking for