User name and password for oracle 10g

Hi Guys,
I downloaded oracle 10g and installed on my computer but when i try to work on SQL plus it's asking for an username and password, i tryed as scott/tiger,system/manager but unable to login please help me what to do...??

When u install Oracle 10g, it forces u to enter new passwords for System as well as scott user and it does not allow u to keep old know passwords as manager and tiger.
If u installed with new passwords successfully, u must be knowing those new passwords and there is no reason to try with system/manager. Instead try to connect with new passwords. We never faced such problems.
If the problems still persits, check that
a) Oracle service is running
b) Instance is running by and whether u are able to connect / as sysdba
Suresh Bansal

Similar Messages

What is the default user name and password for oracle databse 10g

Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
thanks

system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
In case passwords have been forgotten, those can be reset:
From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
OS> sqlplus / as sysdba
SQL> alter user sys identified by yourNewSysPassword;
SQL> alter user system identified by yourNewSystemPassword;
And you're done with it.
HR Madrid

User name and password for Oracle BI Spreadsheet Add-in

Dear all,
I downloaded Oracle Database 10g Express Edition and I installed it successfully. I created a new account. Then I downloaded Oracle Business Intelligence Spreadsheet Add-in and I installed it successfully as well (both on my PC).
Now I would like to run Oracle Business Intelligence Spreadsheet Add-in but I don't know the way of running it. I click "New query". Then I go to the "Connection editor". There are four boxes.
"Description box" is clear. I write 127.0.0.1 or k219 (it's the name of my computer) into the "Host name box". As the "Port Number box" I use 1521. Then I write xe into the "SID box".
Then I return to the "OLAP connection tab". There are items: user name and password. I try to write user name and password created in Oracle Database 10g Express Edition. And the result is an error: Faild to connect to OLAP service
BIB-10701 An error occured during connecting to metadata
oracle.dss.metadataManager.common.MetadataManagerException: BIB-10701 An error occured during connecting to the database
oracle.dss.connection.common.ConnectionException: BIB-16627 It's not possible to connect to the databse
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'OLAPIBOOTSTRAP' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Please, is there anyone who can help me?
Your user Frank

When u install Oracle 10g, it forces u to enter new passwords for System as well as scott user and it does not allow u to keep old know passwords as manager and tiger.
If u installed with new passwords successfully, u must be knowing those new passwords and there is no reason to try with system/manager. Instead try to connect with new passwords. We never faced such problems.
If the problems still persits, check that
a) Oracle service is running
b) Instance is running by and whether u are able to connect / as sysdba
Suresh Bansal

Recovering user name and password in Oracle 10g

Hi
Longback I installed oracle databse 10g on my windows xp box. Now I can't remember the user name and password to log in to the database using the Database control login page. The only thing I did at that time is activation of scott account. I am able to connect to databse with scott/tiger in SQL*plus. So how to I recover the username and password here. Any help please
Regards
Srinivas

Hi
Thanks a lot for your reply. I am new to Oracle.What I need here is how to Log in to the database from "Oracle database control" Login page. I forgot the user name and password. I think I need to select the SYSDBA option in that page. Just curious to know how to recover the username and password for SYSdba. When I try to log using scott and tiger it is saying that I don't have sufficient admin privileges to login. Is reinstall the only way out to get the user ID and passowrd.
Regards
Srinivas

Login page user name and password for Oracle Database

Hi,
I created a login.jsp page with username,password and a submit button. How can I validate this username and password from my Oracle database username and password?
I am using NetBeans5.5 with Tomcat5.5.17. Right now I have hardcoded username and password in my persistence.xml.
Anyhelp?

Thnx BalusC for ur reply. Let me explain my issue.
I have created a login page. and user is able to enter user name and passowrd on this page. User is supposed to press a 'submit' button when user enters username and password to connect to database. What should I write in 'submit' button's action to let user allow to proceed if username and password are correct i.e. username and password of my oracle database. (usename=scott and passowrd=tiger).
plz help.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

HT1386 How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

How do I create one Apple ID and iTunes user name and password for all of my Apple products: iPad, iPhone, and iPod plus iTunes on my PC?

Yes, I do have multiple devices and it appeared to me that every time I tried to sync or log onto iTunes, the password was incorrect. Consequently, I was and am constantly changing it. Wouldn't it be nice if Apple would simply say that you only need one Apple ID and one password regardless of the number of Apple devices you intend to sync via iTunes.
Barring the above, how about a way to merge all of the Apple IDs and passwords into one.

After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page. In past could go to bookmark and the start
page would automatically come up. Now I must enter the user name and password every time to access the personalized start page. tried to find some settings that needed changing but no luck. is this a problem with iOS 8 Earthlink referred me to apple they could not help any help here

Hello nkrlw,
It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
On iPhone and iPod touch, tap in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
Cheers,
Allen

Wht is default User name and password for the J2ee server

Hi , All
I had downloaded JSC for evaluation to get to creator hero ....
After Complete Instalation I had started PointBase then start default Server Domain1
when I try to start the deploy tool for that wht is username and password 'coz while installing server it doesn't ask me for user name and password for domain1......
even same in apllication server .... username ==?? and pwd =??
help me out...
Thanks in adv..
--Sudhir

user admin
password adminadmin

Forgot User Name and Password for Parental Controls

I apparently have forgotten the user name and password for the parental control feature in itunes. How do I recover the information or unlock the controls?

I tried entering the same information as my computer user name and password and it does not work for locking Parental controls. What is weird is I can Log on to Itunes and my computer but it will not lock parental controls. What I am trying to do is keep anyone from changing the settings. Again I enter the same information as my computer but it DOES NOT WORK!!!!

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

Firefox will not save my user name and password for one of my sites. How can I fix this problem. It is getting annoying having to reenter every time I check this site. Is there a solution.

I had my user name and password saved for my library site. My grandson hit something and now the saved user name and password are gone. It asks me every time to enter it and it is getting annoying. How do I fix this. I want Firefox to remember these codes.

You can create a bookmark with the JavaScript code via a right-click on the "Remember Password" link on the squarefree.com website and choose "Bookmark This Link" and select the "Bookmarks Toolbar" as the destination folder for easy access.
* https://www.squarefree.com/bookmarklets/forms.html#remember_password
You need to use the "Remember Password" bookmarklet before or after filling the name and password field on the website with the <u>login form</u>, but before submitting the login form by clicking a button on the web page.
If the site is using autocomplete="off" then you see a number not equal to 0 (i.e. attributes were removed) in the pop-up alert from the bookmarklet and Firefox should offer to remember the name and password via a drop down dialog of the key icon that will appear on the location bar (Firefox 4+) or via an info bar at the top (Firefox 3).

Time Capsule won't accept my user name and password for access - Help!

Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.

Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers!

I use a program called RoboForm2Go that will fill in user names and passwords for me when I open a site and now that option is not available in the taskbar at the top. How can I use that feature again?

I save the RoboForm2Go program on a flash drive and when I opened a site that I had saved the user name and password, the RoboForm2Go would show up in the taskbar with the site I opened so I could just click on it and it would automatically fill in the info for me.

Under View>/toolbars, I don't have an option to choose RoboForm Toolbar. When I initially set up the program, I was using Internet Explorer and I can go to the taskbar at the bottom and choose RoboForm but then whatever site I was opening in Firefox will now open in Internet Explorer instead of Firefox. The old version of Firefox would display the RoboForm toolbar at the top.

User Name and Password for JCO RFC call to BAPI

Hi all,
What I think I know:
--We do NOT have Single Sign On configured so don't tell me to use SSO please - I agree, but...
--We have a requirement to do a goods receipt which prints labels for the handling units
.....The printer to which the labels are directed depends on the user who is running the transaction
What I think this means
--We will need to specify a user name and password in the RFC call so the label will go to the correct printer
--I cannot use the IllumnLoginPassword (or whatever its name is) for the password
--I need to prompt the user for their password a second time after they login to our MII app
The problem
--I will need to store the password somewhere for the duration of the session
......In session variable that has been encryted
.............I didn't see an encryption action block so I could create my own
......In the database using database column encryption
.............A little bit of a pain, but not too bad
Any corrections, alternatives, ideas .... ???
Thanks,
--Amy Smith
--Haworth

Thanks for the attention guys. A little clarification.
1. I have been assuming that I cannot use the IllumnLoginPassword for the JCO SAP password in the action block. If this is NOT true, then it solves my whole problem.
2. It would not work to prompt a shop floor person for their password every time they do an operation completion. Well, at least
if I don't want to not get lynched!
3. I am planning on prompting people every time they log on for their ECC password and retaining it somewhere secure while they are logged on (and longer if they skip the logoff step.)
4. I have been focusing on how/where to retain the password, but also need a way to encrypt it during transmission. Jeremy said the applet/BLS would at least encode it for me. That is good.
--Amy Smith
--Haworth
Edited by: Amy Smith on Feb 18, 2010 1:30 PM

User name and password for oracle 10g

Similar Messages

Maybe you are looking for